This study attempted to analyze the comparative advantage in terms of disaster safety costs in verifying the effectiveness and economic feasibility of the high-performance water-bulwark system in the pole tunnel, which was recently promoted as a part of the acceleration of vehicles. The tunnel to be analyzed was divided into a short tunnel(Anyang, Cheonggye) and a long tunnel(Suraksan, Sapaesan). As a result, it was analyzed that 25% of the improvement effect would occur if one lane was secured by applying the Water-Bulwark System. It was analyzed that this is because the time value cost, which accounts for a large proportion of the traffic congestion cost of short tunnels and pole tunnels, differs depending on the congestion time and traffic volume, not the length of the tunnel.

This study is to investigate the degree of field awareness of how each provision of the Serious Disaster Punishment Act will affect accident prevention. As a result of conducting a survey of construction site workers, it was analyzed that construction site workers had a low sense of safety and did not voluntarily engage in safety activities. And it can be seen that they are taking a very passive position that it is efficient to implement safety under the supervision of the supervisor. Workers who need voluntary construction site safety activities are most aware of the situation at the site, but the problem was pointed out as “lack of procedures for listening to opinions and preparing improvement measures” for these problems. Future research is needed to see if this is a problem for individual workers or for those in charge of safety and health who do not correct it even though active opinions have been submitted.

다양하게 변화하는 재난양태와 기후변화로 인한 빈번한 재난발생뿐 아니라 생활수준 향상 등의 이유로 재난안전에 대한 국민적 관심이 증대되고 있다. 이와 연계하여 재난안전 산업에 대한 요구도 증가하고 있다. 그 동안 다양한 재난안전산업 육성 및 활성화 정책이 수립되었지만, 국가주도의 정책이 대부분이었고, 민간분야와 국민관심도가 반영된 정책은 부재한 상황이다. 따라서 본 연구에서는 국민관심도를 고려한 재난안전산업 육성방안 수립을 위하여 소셜미디어 분석을 활용하는 방안을 제안하고자 하였다. 재난안전분야의 국민관심도를 분석하기 위하여 최근 3년간의 소셜미디어를 대상으로 분석을 실시하였다. 분석 결과, 국민은 실제 발생했던 재난에 대한 내용, 즉각적으로 실생활에서 필요한 분야에 대해 관심도가 높은 것으로 나타났다. 또한 실제로 경주 지진발생 당시 재난 관련 소셜데이터가 급증하는 것으로 나타났고, 뉴스에서는 피해상황 등에 관한 내용이 많은 반면, 트위터와 블로그에서는 구호물품, 대피요령 등에 관한 내용이 주를 이루고 있는 것을 확인하였다. 본 연구의 결과로 국민적 관심도를 분석하기 위한 방법으로 소셜미디어 활용방안에 대한 가능성을 확인하였고, 재난안전산업의 민간분야 확산 차원에서 국민관심도를 반영한 재난안전산업 정책 수립방안을 제안한다.

The purpose of this study is to provide basic data to help ensure the safety and enhance industrial competitiveness of plant construction projects by analyzing the safety management status of, mainly, chemical engineering plant construction projects, and proposing specific measures and models to reduce human/educational, technical/systemic, institutional disasters. This study was done using literature research and case study/empirical study methods. The results of this study are summarized as follows. First, we classified the major disasters from the quarterly released ‘major diaster cases in construction business’from Korea Occupational Safety and Health Agency according to the type of construction and presented the causes and prevention measures.

Disaster and safety budget can be characterized as a large-scale public asset on which the government has a significant role. It is of a crucial importance to properly allocate the limited national budget to various areas as necessary. Higher investment efficiency of the budget related to disaster and safety management requires distribution criteria based on relevance and efficiency. Currently, the budget related to disaster and safety management is orchestrated through the prior consultation system. However, there is still no clear framework for reviewing the investment direction and setting the priority investment areas by prior consultation. This study analyzes the status and characteristics of disaster and safety management projects by damage type and proposes a structured system for prioritization. This framework can be useful in selecting the areas that need priority investments by damage type of disaster and safety management projects, thereby contributing to improving investment efficiency.

In changes of social environment, change of the use of land due to the change of residence type, industry and urban structure is an influential factor to safety vulnerable social group. From PTSD from disaster experience point of view, experience of disaster, damage from disaster, witness of disaster make people experience anxiety and confusion, increase the anxiety toward disaster and lead to difficulty in daily lives. As for the result of analyzing anxiety factors regarding disaster damage potential composed of 20 items of safety manager, damage potential of sink hole which recently rapidly increased was the highest, and followed by anxiety from safety damage potential of family, anxiety from phone call damage. Likewise, if the anxiety toward disaster damage potential is digitized, it contributes to setting safety management planning for disaster prevention as it visualizes the risk.

In addition to improving economic growth and development of advanced production technology brings many benefits to our society, but if the growth of this still has the shadow of accidents exists. In particular, the construction site has seen a significantly higher accident rate figures despite efforts on disaster prevention. Among the various methods of reducing the need for disaster safety education industry it has become very stressed its importance through many studies. When a disaster causes significant share of the construction industry due to the lack of educational causes, including technical causes, managerial causes, classification and educational causes of this ateumyeo safety awareness and knowledge account for large proportion. In the health and safety education, centered on the subjects of education supervisors will be able to reduce the real and effective industrial disaster education should be run.

In addition to improving economic growth and development of advanced production technology brings many benefits to our society, but if the growth of this still has the shadow of accidents exists. In particular, the construction site has seen a significantly higher accident rate figures despite efforts on disaster prevention. Among the various methods of reducing the need for disaster safety education industry it has become very stressed its importance through many studies. When a disaster causes significant share of the construction industry due to the lack of educational causes, including technical causes, managerial causes, classification and educational causes of this ateumyeo safety awareness and knowledge account for large proportion. In the health and safety education, centered on the subjects of education supervisors will be able to reduce the real and effective industrial disaster education should be run.

In this study, we recognize that the interest about construction safety and disaster increases, and check the status of current research about construction safety. And we obtain the direction of future researches and implications for development. For this study, we analyzed the published researches in the last 11 years about construction safety, and addressed annual trends and research topics for a lot of construction safety research. And the future prospects of construction safety research were analyzed with the latest news articles.

The disaster and safety accidents in any construction site occur inevitably. Since the on-site disaster and accident occurrence became one of major concerning factors in construction site, architects & building executers have been flooded with safety management advices. The purpose of this paper is to survey and analyze the effect of the application of Safety Patrol Management System(SPMS) upon the reduction of disaster & accident occurrences in construction site. In order to estimate and reduce the disaster and accident ratio in construction site, various surveyed data has been analysed. It will establish the suitable design standards and suggest the basic database for estimating disaster and accident ratio.

Automobile was first introduced in 1903 in South Korea, the masses of the car was carried out rapidly compared to other countries. However, many people were killed in a traffic accidents and economic loss was occurred due to the spread of the automobile. In South Korea, 2012, traffic accident occurred 223,656 times, 5,392 fatality, 344,565 injured people. In the last five years, about 224,000 accidents per year were occurring. In other words, 610 traffic accidents occur and about 15 people pass away in one day. In addition, the proportion of traffic accidents is first place in the OECD countries and it is very high in the world. Understand occurrence tendency of traffic accident, accident frequency rate of the driver who drives more than 10 years was higher than the novice driver. In addition, as a result of examining the cause of the traffic accident, breach of safe driving obligation appears highest case (125,391 times), and followed by signal violation, break safety distance. Therefore, the majority of traffic accidents occurred by the lack of safety awareness of the driver. In this study, prevent the loss of human life and property in traffic disaster, by establish disaster prevention measures that investigated by questionnaire survey and statistical data of the state of consciousness and driving posture in response to the driving history of the driver.

The influences of scatterer and absorber in turbid material by light scattering on silica fume of additive were interpreted for the scattered intensity and wavelength. The molecular properties have been studied by Monte Carlo simulation in resin of New Austria Tunnel Method. It has been found that the effects of optical properties in scattering media could be investigated by the optical parameters(μs, μa ,μt). Monte Carlo Simulation method for modelling of light transport in the civil engineering and construction field was applied. The results using a phantom were discussed that the distance from source to detector is closer, and scattering intensity is stronger with those obtained through Monte Carlo Simulation. It may also aid in designing the best model for coatings and corrosion for the durability of metal constructions.

The accident which is caused by the press work remains a Permanent obstacle in worker's hand or arms, the disaster ratio is high and the fatal case is many. Mainly Like this accident occurs because the hand to enter with inside of the press die, therefore, basic countermeasure is the safety press. In order to prevent access to mechanical moving part by the hand or any part of the body, it is important to making a safety die design Structurally. It presents the design of the safety press die with suitable structure in the Product's attribute which it had shown in samples, There is a possibility of being difficult because the attribute of safety die design that had present all the productions from research does not agree each other. but because the representative process which is used most at sample had designed, If you were imitates with safety die design base which is presented from this research, It comes to be thought to be the part which can are used at the various sides.

혼탁매질에서 산란체와 흡수체의 영향은 빛산란에 의해 파장에 대한 산란세기로 설명된다. New Austria Tunnel Method의 수지에 대한 산란의 분자특성들은 연구하기 위해 Monte Carlo Simulation하였다. 이는 산란매질에서 광학적 파라미터들(μs, μa, μt)에 의해 조사되어 그들의 영향을 알 수 있었다. 산란매질에서 광자에 대한 빛분포에 의한 결과는 광원에서 검출기까지 거리가 가까우면 산란이 증가하여 산란세기가 크게 나타났다. 이는 강구조물의 내구성을 위한 코팅과 부식에서 좋은 모델을 디자인하는데 도움이 될 것이다.

본 연구에서는 밀크 카제인과 WPU를 이용한 하이브리드 수지를 합성하였다. 합성한 하이브리드 수지를 피혁(Full-Grain) 표면에 코팅을 하여 카제인이 하이브리드수지에 어떤 영향을 주는지에 대해 분석 하였다. 내용제성 테스트 데이터에 의하면 WPU 와 하이브리드 수지 양쪽 모두 높은 물성치를 나타내었다. 인장 강도 측정치에서는 WPU 단독 결과(2.130 kgf/mm2)가 가장 낮은 수치를 나타내었으며, WPC-3(WPU 91: casein resin 9)의 경우가 가장 높은 인장력(2.191 kgf/mm2)을 나타내었다. 또한 내마모도 측정에서는 WPC-3(50.090 mg.loss)가 좋은 물성값을 나타내었다. 연실률의 경우 WPU(637 %) 단독 코팅물의 분석값이 가장 높은 637%로 알 수 있었다.

미세 조직은 SEM, FT-IR 스펙트라, 인장특성, 그리고 [NCO]/[OH]의 mole %, 입도분석에 의해 측정하였다. 친환경적인 NATM에 관한 관심이 고조됨에 따라 스테인레스같은 금속코팅에 더욱더 중요한 열경화 무용제 수지를 합성 하였다. 이 수지는 일반적 도료와 비교하여 매우 강도가 강하고 내구성이 매우 좋다. 폴리우레탄 수지는 폴리올, IPDI, 실리콘 계면활성제, 촉매, 충전제로 구성된다. 폴리우레탄 화합물은 가교제가 첨가된 수지가 가교제가 첨가되지 않은 수지보다 물성이 우수함을 나타냈다. 견고한 폴리우레탄 도료의 기계적 특성은 [NCO]/[OH]와 가교제가 증가함에 따라 강도가 증가하였다. 합성한 도료의 물성 향상은 스테인레스 산업뿐만 아니라 다양한 산업에서 폴리우레탄 고분자 수지가 강구조물의 보수보강에 많은 응용이 기대된다.

New governance in the area of disaster management(New Governance) of the Safety Building in the form of public-private network as required in this era, SWOT can provide a strategic way to build public-private partnership recognized the necessity for a more efficient way. Between government agencies, private organizations and government and private organizations for the network between the systematic approach based on mutual trust, and participation by the activation of the meaning of seeing places studied. Partnership for Disaster Management as a result of the settlement than if the existing disaster management system for disaster response system more effective and efficient functioning in reducing human and material damage is expected to contribute are getting out.

If you examine the Industrial Disaster Analysis Content that occurs every year in the small and medium enterprise, industrial disaster occurs because of manager's lack of safety and worker's unprepared safety education. Therefore effective safety education systems are needed to offer adequate knowledge and technology to the workers. On this research, to give an effective education way to decrease industrial disaster we administered to the workers who are in charge of 300 workplace in Incheon area to search actual condition of industrial disaster and to disclose a link between industrial disaster and industrial safety education. We put in effect on frequency study and examined x2 using SPSSWIN 10.0. On the research, the results shows that the industrial safety education and training are in effect regularly and the satisfaction are low. But the manager's satisfactions are high through safety education. So it shows that we need to find a way to put in effect safety education to satisfy the workers.

Small & medium sized company is the most efficient way of management to prevent my accident in the area of industry. Employees are more than 30 to less than 50 persons and which is liable for securing a safety manager on site, is gradually seen on the surface. Even a small company is nothing less than a dead zone from a safety since it's free from his obligation of employing a safety manager. Let us now think about the effective measures against a industrial accident by collecting, reviewing a variety of preventive measures, which is being carried out for preventing an industrial accident happening in a small company, and comparing, analyzing the effect according to the respective measures. Through this research, it's expected to contribute to both the development of small & medium sized company and our national economy with the improvement of a company's competitiveness and the accumulation a technical background by way of prevention from occurring industrial accident in a small & medium sized company, in accordance with an friendly environment of work room to protect the employee from leaving his job.