The airport is chosen as the measurement airport in this paper to investigate the noise characteristics of piston engine aircraft used for training at Muan airport. Five measurement points near the runway are chosen. The maximum noise values of piston engine aircraft (C172) and SR20 take-off processes are measured. The results show that the average maximum noise values of the five measuring points range from 66.5 dB(A) to 76.7 dB(A), with point C having the greatest noise influence. During take-off, the maximum noise of an SR20 aircraft occurs near 500Hz of low frequency.

There is a considerable amount of research on metal material product worker’s hearing loss caused by noise that comes from manufacturing process. A further investigation that characterizes the sound that comes from manufacturing process of metal material products. however. To do this, a noise management plan is needed. It should include a generated sound process from the main sources of disturbance at manufacturing process areas. And a soundproof measurement will identify the amount of noise reduction needed for a hearing-safe working environment. Finally, researchers in this study measured tests on the noise and the vibration process, and the noise caused by operations allowed for an investigation on the suitability of certain environmental conditions. Noise-related programs can be used to predict the noise distribution of the noise level characteristic. This can help identify and reduce the presence of sound interference through sound proofing measures.

PURPOSES : The exposed aggregate concrete pavement (EACP) is adopted to achieve low traffic noise and long-term skid resistance in European countries such as Belgium and Germany. In Korea, it is first introduced at the Myeon Cheon field site in 2010. It reduces 3 dB(A) from tire–pavement noise compared with transverse tining. Recent investigations show that EACP can reduce tire–pavement noise by an additional 5 dB(A) compared with transverse tining. In this study, the tire–pavement interaction noise of EACP is compared with that of conventional pavements such as asphalt pavement, next-generation concrete surfaces (NGCS), and transverse tining. METHODS : EACP is constructed at two field sites on the SOC research center and Yeo-Ju test road to compare the noise level via close proximity noise measurement. In addition, the noise is measured using two vehicle type based on vehicle speeds of 60, 80, and 100 km/h. RESULTS : The results of noise measurement obtained from the SOC research center are as follows: Porous asphalt pavement 92.8 dB(A), HMA 96. dB(A), transverse tining 100.1 dB(A), and 8 mm EACP 97 dB(A) at a driving speed of 80 km/h. For the case of the Yeo-Ju test road. The noise levels at a driving speed of 80 km/h are as follows: 6 mm EACP, 93.6 dB(A); asphalt grooving pavement, 94.72 dB(A); 8 mm EACP, 95.2 dB(A); NGCS, 95.2 dB(A); transverse tining, 104.1 dB(A). CONCLUSIONS : The result of noise measurement of two sites in the SOC research center and test road shows that the noise level of the 6 mm EAC is lower than that of concrete pavement, such as tining and NGCS, and similar to that of asphalt pavement. In addition, the noise level of the 8 mm EAC is similar to that of the NGCS pavement. The noise reduction effect of the EAC is greater when small-sized coarse aggregates with lower flat and elongation ratios are used.

최근 자기공명영상 획득을 위한 시뮬레이션 도구가 개발되어 오랜 시간이 소요되는 임상 연구를 대체할 수 있게 되었다. 이에 본 연구에서는 MRiLab 시뮬레이션을 사용하여 부가인자인 에코 시간의 변화에 따라 경사에코 펄스 시퀀스가 적용된 뇌 T2 강조 영상을 획득하여 영상의 신호 및 노이즈의 변화를 정량적으로 평가하고 경향성을 파악하고자 한다. 이를 위해 실제 MRI 장비를 기반으로 새롭게 개발된 MRiLab simulation tool을 사용하여 모든 파라미터를 같게 고정한 후 TE만을 20~95 ms범위에서 5 ms 간격으로 각각 설정하여 경사에코 펄스 시퀀스가 적용된 뇌 T2 강조 영상을 획득하였다. 획득된 영상들의 신호 및 노이즈 특성 변화를 정량적으로 평가하기 위해 신호대잡음비 및 대조대잡음비를 측정하였다. 결과적으로, TE가 증가할수록 SNR은 감소하고 CNR은 증가하는 경향을 보였다. 이는 TE가 증가할수록 관심 영역으로 설정된 뇌척 수액 신호는 일정하게 유지되는 반면 노이즈는 증가하였으며, 백그라운드로 설정된 백질의 경우 신호가 감소함과 동시에 노이즈가 증가한 것이 원인으로 분석된다. 결론적으로, 진단에 용이한 경사에코 펄스 시퀀스가 적용된 뇌 T2 강조 영상을 획득하기 위해서는 그 목적에 따라 적합한 TE를 설정하는 것이 중요함을 확인하였다.

High concentrations of fine particles are increasingly being detected due to inflows from abroad and local emission sources in Korea. As most people spend about 90% of their time indoors, the use of indoor air cleaners has grown significantly as they are now thought to be essential items. In this study, the noise, power consumption, and clean air delivery rate (CADR) of commercial air cleaners were analyzed according to the structural shape of the air cleaners. Analyses were performed based on the experimental results of 249 cases for air cleaners certified by Korea Air Cleaning Association. The air cleaners with front inlet and upper outlet air flow direction, which currently account for the highest market share, were found to have the highest noise per CADR (dB(A)/(m3/min)). On the other hand, the air cleaners with the inlet and outlet air flow in the same horizontal direction were found to have lowest noise per CADR than other structures.

The prospect of the new railway construction has led to resistance from residents, partly based on noise and vibration issues. Particularly, as tracks often pass closely to residential dwellings, constructors are then required to take account of noise and vibration. So the prediction of noise and vibration for train is very important thing. The train noise and vibration nearby the elevated railway make one specific issue. For the elevated railway, this paper concerns the rolling noise by the wheel/rail and the structure-borne noise by the bridge. Based on the results, this paper proposes the source model of elevated structure-borne noise and the calculation model for elevated railway noise. Also prediction model is presented with rolling noise and elevated structure noise which are calculated by considering the power level of a source for one-third octave band, ground absorption and barrier deflection. A lot of empirical data is needed to predict the noise and vibration. And one of the best ways to control the wayside noise is to analyze the noise level.

Numerical analysis for flow and noise characteristics of sirocco fan design factors is conducted in this study. 4 cases of blade angle(α=24°~30°) and 5 cases of RPM(390~1170RPM) are calculated. Flow characteristics are compared for the number of blades. Outlet flow rate is tended to decrease as the number of blades increased. There is little difference in the flow characteristics for the angle of blade. The highest outlet flow rate is predicted at α=24°, and the lowest at α=28°. Flow and noise characteristics are compared for α=24° and 26°. Outlet flow rate is almost similar in both cases, but noise for α=24° is predicted higher at high RPM conditions.

철도소음은 도시지역의 철도건설과 유지에 가장 큰 장애 요소 중 하나이므로 보다 효과적으로 철도소음을 저감하기 위한 연구가 활발히 진행되고 있다. 방음터널은 철도소음을 저감할 수 있는 가장 효과적인 방법 중 하나이나, 하절기 높은 내부 온도 증가로 인하여 궤도좌굴 또는 전력, 신호 등 선로 설비의 안정성을 저하시킬 우려가 있다. 이러한 온도 상승 문제는 통기 형 방음판을 이용하여 해결할 수 있으나, 방음터널 적용 시의 소음저감 성능에 대한 연구는 미흡한 상황이다. 이 논문에서는 수치해석을 통하여 통기형 슬릿방음판의 효과적인 방음터널 적용 방법에 대한 연구 결과를 제시하였다. 수치해석은 음향해석 프로그램인 Pachyderm Acoustics으로 모델링한 복선 방음터널을 이용하여 수행하였다. 철도소음은 기존 연구결과를 이용하여 모사하였으며, 슬릿방음판의 적용 위치가 다른 6가지 경우에 대하여 소음저감 효과 변화를 검토하였다. 음향해석 결과 20% 정도 의 슬릿방음판 적용 시에도 철도소음을 최소 5dB 감소할 수 있는 것으로 나타났다.

Aircraft noise loss in residential areas around small heliports is becoming more and more serious. Under the condition of long-term exposure to aircraft noise, it will not only cause physical and mental harm to human body, but also cause social and economic losses to the living environment around the airport. Therefore, it has been a serious contradiction factor in the community for a long time. This study points out the impact of noise caused by helicopter flying in aviation brigade of small heliport on the nearby residence area, The fixed noise monitoring system is set up to measure the aircraft noise every day. and selects the measurement site to facilitate the impact of noise caused by helicopter flight on the surrounding life.

열차 소음은 도시 지역 내 철도 네트워크 확장에 주요 장애물이므로 보다 효과적인 소음 방지 수단을 개발하기 위한 연구가 진행되고 있다. 현재까지 방음 터널은 철도 소음에 대한 가장 효과적인 대책 중 하나이나, 중량 문제로 인하여 한정적으로 적용되어 왔다. 이 논문에서는 방음터널의 중량을 효과적으로 감소시킬 수 있는 슬롯형 방음 패널의 소음저감 성능의 예측 가능성을 평가하고, 소음저감 특성을 분석하였다. 연구의 목적을 위하여 음향 해석 프로그램인 Pachyderm Acoustics가 활용되었다. 음향해석의 적절성은 잔향실에서 얻은 실험 데이터를 사용하여 확인하였다. 실험데이터와의 비교 결과, 소음 감소 성능은 음향 분석을 통해 충분히 작은 오차 내로 예측 가능한 것으로 나타났다. 또한 슬롯형 방음판은 설계된 차음주파수 범위에서 약 25dB∼35dB 정도의 소음을 감소시킬 수 있는 것으로 나타났다.

PURPOSES : In Korea, concrete pavements with transverse tining, which have excellent skid resistance, have been mainly constructed to secure road bearing capacity and safety. However, transverse tining has higher noise level of approximately 4-5 dB(A) compared with asphalt pavement. As a method to determine low-noise characteristics of concrete pavements, the fine-size exposed aggregate concrete pavement (EACP) has been studied in Korea and abroad. The surface of EACPs consists of exposed coarse aggregates and 2-3 mm removal surface mortar. EACPs have the advantages of maintaining low-noise and adequate skid-resistance levels during the performance period. Although EACPs have been widely studied to reduce noise, quantitative noise analysis with various paving methods has not been performed owing to differences in mixture proportioning, construction conditions, environmental conditions, and measurement methods. Therefore, the purpose of this study is to investigate the low-noise characteristics of fine-size EACPs by comparing noise with various paving methods, including concrete and asphalt pavements. METHODS: In this study, noise data were collected to quantitatively analyze the low-noise characteristics of EACPs compared with various paving methods such as transverse tining, longitudinal tining, SMA, and HMA. RESULTS: The evaluation of the low-noise characteristics of EACPs compared with transverse tining showed that the relative noise of 13 mm EACP with transverse tining was reduced by approximately 2% at 60 km/h, 4% at 80 km/h, and 5% at 100 km/h. The relative noise of 10 mm EACP with transverse tining was reduced to 3%, 7%, and 8% at 50 km/h, 80 km/h, and 100 km/h, respectively. In addition, it was confirmed that the noise of 10 mm EACP was similar to that of asphalt pavement. CONCLUSIONS : It was confirmed that EACP using 10 mm coarse aggregates generates lower noise than that using 13 mm coarse aggregates. Therefore, the use of coarse aggregates smaller than 10 mm needs to be considered to improve the low-noise effect of EACP.

선박의 고속, 대형화 및 규제강화의 추세에 따라 유동소음의 중요성이 강조되고 있다. 그러나 항공, 철도 등의 공력소음 분야에서 유동소음을 설계에 반영하고 있는 것에 반해 조선해양분야에서는 고려되지 않고 있다. 본 연구에서는, 선체유기 유동소음의 해석절차를 정립하고 쇄파의 영향이 작고 선체선형에 의한 유기소음의 특성이 뚜렷한 파랑관통형 선형에 대해 소음특성을 분석하였다. 선체유기 유동소음의 주요 메커니즘인 난류경계층 내부의 복잡한 난류유동과 구조물의 유체-구조 연성적 소음원은 벽면변동압력을 이용하여 가진력을 모델링하고 파워흐름해석법을 이용하여 진동음향 응답해석을 수행하였다. 주파수 영역 및 선체부위에 따라 상의한 소음특성을 가지며 저주파수 영역에서 선형의 영향이 상대적으로 크고 유속에 비례하는 경향을 확인할 수 있었다.

In commercial vehicles. the pulsation noise when the power steering operating is the major item to make the complain for users. If this noise have related to vibration characteristics in steering system's parts or assembly, it makes the problem in vehicle quality. Recently, the users demand the high quality in commercial vehicles, and we must identified the relevance between the pulsation noise and the vibration characteristics. After the identification, we can design the power steering system for satisfaction the user’s needs. Finally, the identification of relevance in pulsation noise for analysing the vibration characteristics will be suggested advanced power steering system.

This Paper deals with the measurement and analysis of the brake squeal noise, the wheel’s and block brake’s vibration. The squeal noise, a kind of self-excited vibration, is generated by the friction between the rim of the revolving wheel and the block brake. The goal of this paper is to investigate experimental the relation between brake squeal noise and vibration mode of railway wheel with block brake to the track of friction surface on tread of railway wheel and the tread rake angle of railway wheel. Experimental results with Mode Analysis and Run Mode Analysis show that vibration mode of railway wheel with block brake is related with brake squeal noise.

In this paper, a study on noise reduction characteristics of the precast floating track system, being developed as measures to mitigate noise and vibration of existing as well as constructing elevated railroad stations, is presented using numerical analysis. One of the most prominent sound analysis program, Virtual Lab., is utilized in investigating noise reduction performance of the precast floating track system, and structural velocity data, obtained from vibration analysis on a model-updated elevated railroad station considering vehicle-track-structure interaction, are used for the input of the sound analysis. The sound analysis is performed using the finite element method, and noise reduction performance before and after installing the precast floating track system is compared at three enclosed areas in the Daecheon Station, selected as a representative of elevated railroad stations in this nation. From the comparison result, it is seen that the precast floating track system can decrease noise by average of 5dB∼8dB when the Saemaeul train passing through the station and 10dB∼15dB when the KTX train passing through. Also, the noise reduction characteristics is different depending on the type of train and the distance from the track.

In this paper, interior noise that is brought into inside of coach when it passes by straight line track, railway turnout section, curved track, and rail lubricator section with test coach was measured in accordance of track characteristic of urban railway vehicle. It was evaluated with 60km/h of constant speed in the motorized trailer, no.3 car T1 motorized trailer of urban railway vehicle. Interior noise characteristic value is higher in order of curve, rail lubricator, railway turnout, and straight track as a result of the test. The highest characteristic value is 86.7dB in the curved track. And, the lowest characteristics value is 75.5dB(A) in the straight track. For accurate result comparison, it is transformed into sound pressure distribution by time domain, sound pressure level by time domain, sound pressure level for frequency domain and completed analysis.

공조시스템의 소음 예측은 주로 NEBB에서 제안한 경험적인 방법에 의해 수행된다. 그러나, NEBB에서 제안한 방법은 선박에만 있는 대형 덕트의 요소를 반영하지 못하므로 선박에 적용하는데 한계가 있다. 본 논문에서는 선박용 대형 덕트의 소음 예측을 위한 전산해석방법을 연구하였다. 경계요소법을 사용하여 대형 덕트의 단위 길이당 소음 감소량에 대한 추정식을 개발하였고, 경계요소법과 전산유체역학을 사용하여 보강재가 설치된 대형 덕트에서의 유동기인소음을 예측하였다. 유입 유속이 10m/s, 보강재의 종류가 200플랫 바인 경우 100 dB 이상의 큰 소음이 발생하는 것을 알 수 있었다. 또한, 경계요소법과 유한요소법을 사용하여 덕트 투과 소음을 예측하였다. 덕트 내부와 외부의 음압 값 차이는 대략 10~15 dB정도 인 것을 알 수 있었다. 이를 통해 조선소에서는 대형 덕트를 포함한 선박 HVAC 소음 예측을 할 수 있을 것으로 기대한다.

지반진동은 지진원, 지각감쇠 및 지반의 증폭특성 등 3가지 주요 인자로 구성되어 있다. 이 중 지반 증폭특성은 지진원 및 지각감쇠를 신뢰성 있게 평가하기 위해 반드시 고려하여야 한다. 본 연구의 목적은 수평/수직(H/V) 스펙트럼 비를 이용하여 각 관측소의 지반증폭 특성을 평가하는 것이다. 주파수 영역에서 H/V 스펙트럼 비를 구하는 방법은 Nakamura(1989)에 의해 처음으로 제시되었으며, 초기에는 상시미동의 표면파 특성을 이해하기 위해 사용되어 왔다. 최 근에 와서 강진동의 전단파 에너지 등으로 확장되면서 지반 증폭특성 연구에 많이 이용되고 있다. 본 연구는 예당저수 지 인근에 4개의 관측소에서 관측된 6개의 가속도 지반진동을 이용하여 H/V 스펙트럼 비를 분석하였고 각 지반진동의 S파, Coda파 및 배경잡음 각각으로부터 분석된 지반증폭 특성을 상호 비교하였다. 분석결과, 4개 관측소는 각각의 우월 주파수 대역(YDS: ~11 Hz, YDU: ~4 Hz, YDD: ~7 Hz)에서 관측소 고유의 증폭특성을 보여준다. 본 연구의 도출 결과 와 다른 방법을 통해 구한 결과의 비교 평가는 국내 지반의 동적특성 및 지반분류 연구에 유익한 정보가 될 것으로 판 단된다.