In this study, by using a system analysis program(Fluid Flow), the correlation between the location where cladding damage occurs frequently inside the power plant seawater pipe and flow characteristics is analyzed, and the root cause and improvement plan are reviewed. As a result, it was confirmed that a high flow velocity occurred in the backwash piping(7.64m/s) and the front and rear ends of the flow control valve(5.93m/s). In addition, it was confirmed that cavitation occurs when the seawater level decreases below the saturated water vapor pressure at the rear end of the orifice. These areas are locations where the internal cladding damage occurs frequently in power plants, and the main cause of damage is considered to be excessive flow velocity and cavitation in the pipe. In order to solve this problem, improvement method such as installation of backwash pipe orifices, change of pipe shape at the front and rear end of flow control valve, and change of orifice type were derived.

Worldwide plant market keeps maintaining steady growth rate and along with this trend, domestic plant market and its contractors also maintain such growing tendency. However, in spite of its external growth, win-win growth of domestic material industry that occupies the biggest share in plant industry cost portion is extremely marginal in reality. Domestic plant material suppliers are required to increase awareness of domestic material brand by securing quality and reliability of international standard through improvement of design quality superior to that of overseas material suppliers. Improvement of design quality of plant material becomes an essential element, not an option, for survival of domestic plant industry and its suppliers. Under this background, in this study, priority and importance by each evaluation index was analyzed by materializing plant design stage through survey of experts and defining evaluation index by each design stage and based on this analysis result, evaluation index of stage-gate based decision-making process that may improve design quality of plant material was suggested. It is considered that by utilizing evaluation index of stage-gate based decision-making process being suggested in this study, effective and efficient decision-making of project decision-makers would be enabled and it would be contributory to improve design quality of plant material.

Modularization is an important benefit to overall project cost, such as construction period, manpower and logistics. In order to establish a successful modularization strategy, the optimum cost can be realized based on the Envelope Size which is allowed to be transferred to the plant site through analysis of each shape of the module. Through the analysis of the plant structure, the Envelope Size that can be transported on site in units of sizes suitable for maritime and onshore is provided, and finite element method is applied to the existing materials (A36, A572) and domestic materials (SS400, SM490, SWH400) and analyzed the results of the analysis to obtain domestic materials applicable to the plant structure frame.

The object of this paper is investigate noise source at metal material product manufacturing plant and create noise map for predict noise. The plant is located close to a residential area, and residents noise exposure damage expected. Through this research 68 points noise sources were measured. And according to analysis result, 30 percent of noise sources are measured above 90dB(A). Based on this measurement results were create a noise map, and comparison between the predicted noise and the background noise. The noise maps were calculated by noise prediction software using measurement data, GIS data, ESRI SHP files and actual survey data. As a analysis result, metal material products manufacturing plants are will have an effect by noise on the nearby residential area.

화력발전소 전기집진기에서 포집되는 FA(Fly ash)는 재활용률이 높으나 화력발전소 노에 떨어지는 BA(Bottom ash)는 FA에 비해 매우 낮은 편이다. 또한 FA에 대한 연구는 활발하게 진행되고 있는 반면 BA에 대해서는 매우 저조하다. 한편 지속적으로 건축 공사 수요가 있지만 건축 재료를 과거처럼 용이하게 그리고 저렴하게 공급 받기는 더욱 어려워지고 있는 실정이므로 BA를 건축 재료로 활용할 수 있게 하는 연구는 매우 유용할 것으로 판단된다. 따라서 본 연구에서는 재활용률이 저조하여 처리에 부담이 되었던 BA를 최대한 재활용할 수 있도록 건축 재료로 연구 개발하여 BA 재활용률을 높일 뿐만 아니라 BA 처리의 부담을 줄이고, 또한 저렴한 건축 재료를 용이하게 다량 확보할 수 있도록 화력발전소에서 발생한 BA가 건축 재료로 갖고 있는 다양한 특성에 대하여 연구하였다. 화력발전소에서 발생한 BA를 건축 재료로의 특성에 대하여 연구를 진행한 결과 타 재료에 비해 경량성과 단열성이 매우 우수함은 물론 원적외선 방사률 등도 비교적 우수하게 나타났다.

With the increase in food consumption, the amount of animal and plant residues in food manufacturing has continued to increase. In particular, the residues generated from food manufacturing industries have a high recycling value because they are generated in large quantities, are homogeneous, and their recycling costs are less than that of households or small restaurants. In this study, we selected industries that produce large amounts of homogeneous animal and plant residues, including manufacturers of animal oils and fats, vegetable oils and fats, starches and glucose or maltose, and conducted material flow analysis using statistical data, field surveys, and questionnaires. In the results of material flow analysis, the amount of raw materials used in the surveyed industries was 3,029,830 tons per year, and 8,487 tons of animal and plant residues were generated through manufacturing and processing. In addition, the import substitution effect of recycling byproducts from industries into animal feed or similar was estimated to be ₩847,007 million KRW per year.

To date, chemical managements of plant bacterial diseases are complicated by limitations on use of antibiotics in agriculture, antibiotic resistance development, and limited efficacy of alternative control agents. In this study, thus, we performed screening of eco-friendly farming material (notice no. 2-4-064) containing tannic acid as new antibacterial-activity against 7 plant bacterial pathogens: Pectobacterium carotovorum subsp. carotovorum (Pcc), Ralstonia solanacearum (Rs), Acidovorax avenae subsp. citrulli (Aac), Xanthomonas cirti pv. citri (Xcc), Erwinia pyrifoliae (Ep), Clavibacter michiganensis subsp. michiganensis (Cmm), and Streptomycesscabies (Sc), Initial screening of antibacterial effects of eco-friendly farming material was performed using the paper disk diffusion method and co-cultivation in broth culture. Tannic acid based eco-friendly farming material showed inhibitory effect against Pcc, Rs, Aac, Xcc, Cmm, and Ss, whereas it did not show inhibition zone against Ep. However, when it tested by co-cultivation in broth culture, it showed strong inhibition effect against all pathogens that declined growth curve compared to bacterial pathogen only. Interestingly, when we observed morphological changes on those pathogens by SEM, cell morphologies of 7 pathogens were slightly changed that seem to be malfunction in their cell envelope.

The study was surveyed to 269 respondents for investigating psychological response to indoor foliage plants grouped by four type of design materials. 21 indoor foliage plants grouped as filler, mass, form, and line plant, are shown to each respondent for surveying the preference and emotion by SD (semantic differential) scale. It was statically significant that the filler plant group was the least preferred one between the indoor foliage plant and the preference of line plant group was the highest. In filler plant Scindapsus aureus is significantly favored, in mass plant Aglaonema crispum and Syngonium podophyllum, in form plant Ficus banghalensis in line plant Dracaena fragrans ‘Lemon Lime’, respectively. The green is the most preferred color of leaf and gray is the least one. When investigated on the major emotions felt with four types of indoor foliage plant with SD scale, filler plant felt as ‘Bright’, ‘Light’, ‘Pale’, mass plant ‘Warm’, ‘Sharp’, form plant ‘Simple’, ‘Luxurious’ and line plant ‘Sophisticated’, ‘Luxurious’, ‘Pleasant’, ‘Soft’ and ‘Fancy’, respectively. This result will be valuable when the indoor garden is designed with an indoor foliage plant.

This study was performed to grasp the introduction of Korean wild evergreen broad-leaved tree, Ternstroemia gymnanthera, as a plant of indoor garden, and to figure out the light-adaptability under the four types indoor lighting and to provide the introduction plan. The experimental plants, Ternstroemia gymnanthera was purchased from the farmhouse in Jeju-do as a year plant, and it was experimented after the acclimation in the glass-green house of general farm of Gyeongnam National University of Science and Technology for 40 days. The experiment was performed for 1 year more from September 10, 2014 to September 30, 2015. The results of the experiment are as follows. When Ternstroemia gymnanthera is introduced as a plant of the indoor garden, the optical fiber, fluorescent lamp, and LED light in order are suitable to introduce as the proper lighting. In the case of the three-wave light, the growth and development was the worst among the 4 introduced lighting systems, therefore, the growth of Ternstroemia gymnanthera under the three-wave light was incongruous generally. The withering appearance was existed seriously by 500lux. Some leaves were fallen off, but generally smooth growth and development was done in the range of the 1,000lux to 2,000lux. The best intensity for the growth was under the condition of the 1,000lux. When the fluorescent lamp, and LED light are introduced, the most proper luminous intensity is the 2,000lux. When the optical fiber is introduced, the most efficient intensity is the 1,000lux. Generally the smooth growth and development is done under the more luminous intensity. As the result, the wild Ternstroemia gymnanthera is the species of tree to substitute the Ficus benghalensis, or Ficus retusa which is the foreign species, as a central tree or upper tree as well as pot tree, and it is expected to introduce sufficiently as a plant of the indoor garden.

The characteristics of atmospheric dispersion of radioactive material (i.e. 137Cs) related to local wind patterns around the Kori nuclear power plant (KNPP) were studied using WRF/HYSPLIT model. The cluster analysis using observed winds from 28 weather stations during a year (2012) was performed in order to obtain representative local wind patterns. The cluster analysis identified eight local wind patterns (P1, P2, P3, P4-1, P4-2, P4-3, P4-4, P4-5) over the KNPP region. P1, P2 and P3 accounted for 14.5%, 27.0% and 14.5%, respectively. Both P1 and P2 are related to westerly/northwesterly synoptic flows in winter and P3 includes the Changma or typhoons days. The simulations of P1, P2 and P3 with high wind velocities and constant wind directions show that 137Cs emitted from the KNPP during 0900~1400 LST (Local Standard Time) are dispersed to the east sea, southeast sea and southwestern inland, respectively. On the other hands, 5 sub-category of P4 have various local wind distributions under weak synoptic forcing and accounted for less than 10% of all. While the simulated 137Cs for P4-2 is dispersed to southwest inland due to northeasterly flows, 137Cs dispersed northward for the other patterns. The simulated average 137Cs concentrations of each local wind pattern are 564.1~1076.3 Bqm-3. The highest average concentration appeared P4-4 due to dispersion in a narrow zone and weak wind environment. On the other hands, the lowest average concentration appeared P1 and P2 due to rapid dispersion to the sea. The simulated 137Cs concentrations and dispersion locations of each local wind pattern are different according to the local wind conditions.

본 연구는 식물재배 경험이 적고 실습재료의 준비 및 유지, 관리에 어려움을 느끼는 초등학교 교사들이 5학년 1학기 식물의 구조와 기능 단원 실험 실습에 보다 용이하게 접근하면서 교육효과를 높이기 위한 교구 개발을 위한 기초자료를 수집하기 위하여 수행되었다. 수업을 수행하는 교사가 대부분 더 많았으나 뿌리의 구조와 하는 일 단원의 당근 활용 실험 실습은 수행하지 않은 교사가 더 많게 나타났다. 재료의 준비는 학생들에게 가져오게 하거나 학교에서 일괄 구입하였고, 개별 실험보다는 4명의 모둠으로 실험을 진행하였다. 가장 많이 지적된 어려움으로는 식물 구입 및 구비, 실험 결과 재현으로 나타났다. 식물의 구조와 기능에 관련한 교구개발 및 공급에 대한 고려는 교사들이 경험하는 실습수업의 문제점을 해소하고 이를 통하여 실습수업의 생략 및 축소를 막아, 교사 및 학생의 식물에 대한 친숙도를 높이면서 궁극적으로 교육의 효과를 높이는데 기여 할 것으로 사료된다.

일복내의 광환경과 포장상태에서의 물질생산 실태를 파악하기 위하여 5년근 개체군의 층별(상, 중, 하층), 재식립치별(1, 3, 5행)로 맑은 날 및 흐린날 각각 일복내외의 조도를 측정하고 대상조도를 구하였으며 포장에서의 광합성 호흡속도를 측정하였다. 1. 개체군 상부와 조도는 1행이 상대적으로 높고 3, 5행간에는 큰 차이가 없었으나, 중앙부의 경우는 1, 3, 5행간에 뚜렷한 차이를 보였다. 2. 쾌청일에 비해, 맑으나 산광이 많은 날은 일복내 조도가 높고 흐린날은 낮았으나 외부조도에 대한 비율은 양자 모두 쾌청일보다 높았다. 3. 광합성속도는 행별로 차이가 커서 후행일수록 낮았다. 그러나 전행에서도 광합성 최대능력을 나타내는 것으로는 생각되지 않았다.