This study analyzed the factors affecting the effectiveness of the Chemical Hazard Risk Management (CHARM). A survey was conducted on 104 learners who participated in the Risk Assessment training course at Occupational Safety and Health Training Institute. Through a self-administered questionnaire, the effect of personal characteristics, corporate characteristics, and safety and health level of the company on the effectiveness of chemical risk assessment was investigated. As a result of statistical analysis, the safety and health level of the company had a positive (+) effect on the effectiveness of Chemical Hazard Risk Management(CHARM), but personal characteristics and corporate characteristics had no relation to it. This study can be used as basic data for further research related to chemical risk assessment in workplaces.

국제해상충돌예방규칙은 선박이 다른 선박이나 해저 등 어떠한 물체에도 충돌하지 아니하도록 제정된 국제협약이다. 선박의 충돌예방을 위한 규칙은 19세기 중반부터 성문화되고 다듬어져 현재에 이르고 있다. 따라서 COLREGs에서 사용된 용어와 문장 또한 뚜렷 한 학문적, 법률적 의미를 갖고 있다. 그러나 COLREGs를 국내법으로 반영한 해사안전법에서는 ‘충돌의 위험성’과 ‘충돌의 위험’을 구분하 지 않은 채 혼용하고 있다. 이에 ‘위험성’의 정의에 대하여 국제연합 산하의 권위 있는 국제기구인 국제해사기구 및 널리 알려진 비정부 간 기구인 국제표준화기구에서 정의한 내용을 살펴봄으로써 ‘위험’과 ‘위험성’의 차이를 분석하였으며, COLREGs에서 관련 문장을 살펴봄 으로써 이를 구분해야할 근거를 제시하였다. 안전한 항해라는 측면에서 볼 때 향후 해사안전법에 ‘위험’과 ‘위험성’의 구분이 명확해 짐으 로써 이를 준수해야 하는 해기사들의 해상충돌예방을 위한 노력이 한층 체계화되기를 기대하였다.

Tuna purse seine fishery (TPF) constitute more than 60% of distant water fishery production in Korea based on a statistic of 2018, and 28 ships from four different companies were under operation at the western and central Pacific Ocean. On this research, common risk factors during TPF were investigated via enumeration of five years Korean fisherman’s insurance payment statement, followed by some counterplans to diminish the accident rate. The accident rate of TPF on the Pacific Ocean peaked by 43.0% in 2014 and constantly decreased to 23.0% until 2018, presenting an average of 33.6%. Meanwhile, the accident rate on the Indian Ocean reached the highest point 55.1% in 2014 and declined to 11.6% in 2016, having an average of 24.7%. The average accident rate of the Indian Ocean scored 8.9% lower than the rate of the Pacific Ocean, but no statistic significance was observed. Depending on the process of operation, ‘casting or hauling of net’ was the most frequent part that people received an injury (40.4%). When the accidents were classified by their types, ‘falling down’ was the most recurrent cause of the injuries (28.5%). At the point of severity, the worst injuries were induced by crush hazard. Considering aforementioned accident frequency and severity, all the factors on the accident type list were divided into three different groups including high risk, moderate risk, and common risk. This study is expected to contribute to the reduction of occupational accidents during the work of fishermen and establishment of a safety management system for distance water fishing vessels.

정부(해양수산부) 및 관계기관에서는 안전관리 취약선박의 해양안전 증진을 위한 많은 정책을 시행하고 있으나, 선박의 안전관리에 대한 위험성평가 부재로 각 제도의 효과성에 다소 아쉬움이 확인되었다. 선박의 위험성평가에 대한 국내 선행연구는 대부분 개별적 해양사고 위험성에 대한 단편적 위험성만을 취급하고 있어 포괄적 해양사고 위험성평가를 위한 새로운 방식이 필요하다. 선박의 안전관 리에 대한 포괄적 위험성평가 적용사례로 항만국통제와 노르웨이 해사국의 점검대상 선정방법이 있다. 본 연구에서는 국내 해양사고 및 등록현황의 높은 비중을 차지하고 있는 연근해어선을 대상으로 포괄적 선박안전관리 위험성평가를 위한 지표를 개발하고 적용하였다. 그 결과, 각 선박별 위험성을 계량적 수치로 확인하였고, 개별적 안전관리 취약요소의 순위를 식별하였다.

본 연구는 충돌 사고 중에서 정박지에서 대기하고 있는 선박과 이 정박지를 통항하는 선박 간 충돌사고가 자주 발생함에 따라, 정박선 사이를 통항하는 선박의 충돌위험을 예측할 수 있는 모델을 개발하기 위한 기초 연구로 통항 선박의 안전 영역을 도출하는 것이 목적이다. 이를 위해 우리나라 최대 항만인 부산항 남외항 정박지를 대상 해역으로 선정하고 정박선이 가장 많이 대기한 기간 VTS(Vessel Traffic Service) 항적 자료를 추출하여 분석하였다. 정박선 사이를 통항하는 선박의 길이(L)를 기준으로 정박선과 어느 정도의 안전한 거리 (D)를 두고 통과하는지를 알기 위하여 통항 선박의 방위별 D/L 비를 구하였다. D/L 비 분포의 평균 domain을 기준으로 기존 선박 domain 범위 안으로 정박선이 존재할 비율을 분석하여 VTS 관제사의 위험 정도를 반영한 domain을 도출하였다. 추후 연구로는 정박선 사이의 최소 안전거리인 Domain-watch와 정박지 통항 선박의 안전 domain을 활용한 정박지 통항 선박의 충돌위험도 평가 및 분석을 하고, 이를 통해 VTS가 정박지를 좀 더 효율적이고 안전하게 관리하기 위한 모델을 개발하고자 한다.

In general, companies operate systematically in response to financial risks such as exchange rates and liquidity, while they are vulnerable to risks in the manufacturing and sales processes. In particular, logistics refers to the activities for planning, managing and implementing efficient flows from the starting point of goods and products to the point of consumption, The purpose of this study was to develop key risks and key risk management indicators (KRIs) for risks that undermine logistics efficiency so that logistics risks can be effectively prevented and managed. As a result, 40 risk management indicators (KRIs) were developed in a total of six categories in the logistics sector, and the definition, calculation method and early warning grade of each KRI were presented so that companies could prevent risks in advance in logistics activities and contribute to enhancing efficiency of their work.

Stow net fishery is one of the fishery with high fishing work accidents in southwestern sea of Korea. We conducted to serve as basic data for improving the healthy and safe working environment of fisher using risk assessment process (ISO45001) with fishermen’s occupational accidents of the National Federation of Fisheries Cooperative (NFFC) from 2016 to 2018. The average occurrence rate of victim in this fishery was 9.04%, 16.7 times more than such rate in all industries. In addition, the average fatality rate was found to have a very serious level management to 31.06‱, 27.7 times more than such rate in all industries. The safety hazards of stow net fishery was more likely to occur by other general industrial groups, with more severe consequences after the accident. According to 4M analysis, 58.6% of all accidents were caused by human factors, 24.0% by environmental factors, 16.0% by mechanical factors, and 1.5% by managerial factors, respectively. The occurrence frequency by accident type was the highest in 187 cases (32.2%) for struck by object, 158 cases (27.2%) for slipping, and 94 cases (16.2%) for being in contact with machinery. Severity is the highest for others such as diseases etc., in the order of being struck by object, being in contact with machinery, falling from above slipping, collapsing, bumping, and burning. Being struck by object, being in contact with machinery, and slipping are high-risk groups, falling from above others, bumping, and burning are medium-risk groups based on the risk assessment using the occurrence frequency and severity of accident. The obtained results are expected to contribute to the safe operation environment subsidy for fishing crews on the stow net fishing vessel.

When the foundation work of the underground part of the building structure or the excavation work of the civil engineering structure is carried out, there is the earthwork work by the inevitable process. As the economic situation continues to develop, construction in urban areas is becoming bigger and higher in scale due to the expansion of infrastructure and the rescue of urban dwellings in urban areas, and excavation of underground roads is inevitable. Excavation of the underground part may cause problems in the process difficulty and safety of the earthworks due to the complexity and various characteristics of the ground selected without consideration of the ground characteristics and site conditions. In order to complete the required facilities, it is necessary to secure the design and construction of the retaining walls. In order to complete the required construction, It is an important factor satisfying construction period and economical efficiency.

One of the most effective methods to consistently ensure the safety of a tap water supply can be achieved by application of a comprehensive risk assessment and risk management approach for drinking water supply systems. This approach can be termed water safety plans(WSP) which recommended by WHO(world health organization) and IWA(international water association). For the introduction of WSP into Korea, 150 hazards were identified all steps in drinking water supply from catchment to consumer and risk assessment tool based on frequency and consequence of hazards were developed. Then, developed risk assessment tool by this research was implemented at a water treatment plant(Q=25,000 m3/d) to verify its applicability, and several amendments were recommended; classification of water source should be changed from groundwater to stream to strengthen water quality monitoring contaminants and frequencies; installation of aquarium to monitor intrusion of toxic substances into raw water; relocation or new installation on-line water quality analyzers for efficient water quality monitoring; change of chlorination chemical from solid phase(Ca(OCl)2) to liquid phase(NaOCl) to improve soundness of chlorination. It was also meaningful to propose hazards and risk assessment tool appropriate for Korea drinking water supply systems through this research which has been inconsistent among water treatment authorities. Key words: Hazard, Reliability, Risk management, Water safety plan, Tap water

The coastal composite fishery has the highest rate of around 30.0% in registered fishing vessels of Korea for the last three years. The risk analysis for the fisher’s safety of coastal composite fishing vessels was conducted to serve as a basic data for improving the healthy and safe working environment of fisher using fisher’s occupational accidents of the national federation of fisheries cooperatives (NFFC) from 2016 to 2018 (n = 1,105). As a result, the occupational accident occurrence rate of coastal composite fishery was 3.76% in all industries, 7.8 times the rate of that. In addition, death and missing rate was found to have a serious level management to 10.10‱. Among the accidents, 76.0% occurred at sea. The slipping, others and contact with machinery or fishing gear occurred more frequently in order in the frequency of accident occurrence pattern. In the risk assessment using frequency and severity, slipping, contact with machinery and others showed high risk during fishing. The results are expected to contribute to identification and assessment of safety hazard occurred in coastal composite fishing vessels.

The seismic safety of nuclear power plants has always been emphasized by the effects of accidents. In general, the seismic safety evaluation of nuclear power plants carries out a seismic probabilistic safety assessment. The current probabilistic safety assessment assumes that damage to the structure, system, and components (SSCs) occurs independently to each other or perfect dependently to each other. In case of earthquake events, the failure event occurs with the correlation due to the correlation between the seismic response of the SSCs and the seismic performance of the SSCs. In this study, the EEMS (External Event Mensuration System) code is developed which can perform the seismic probabilistic safety assessment considering correlation. The developed code is verified by comparing with the multiplier n, which is for calculating the joint probability of failure, which is proposed by Mankamo. It is analyzed the changes in seismic fragility curves and seismic risks with correlation. As a result, it was confirmed that the seismic fragility curves and seismic risk change according to the failure correlation coefficient. This means that it is important to select an appropriate failure correlation coefficient in order to perform a seismic probabilistic safety assessment. And also, it was confirmed that carrying out the seismic probabilistic safety assessment in consideration of the seismic correlation provides more realistic results, rather than providing conservative or non-conservative results comparing with that damage to the SSCs occurs independently.

This study is intended to look into the effect of construction safety supervision system on risk control and reduction. To achieve this, a survey was carried out to 114 companies in construction, ordering, contract and management. The overall findings were as follows. The effect of construction safety supervision system on risk control and reduction showed that factors of supervision system, supervision cost and supervision method had a positive effect on risk control and reduction. And their perception of the introduction of safety supervision system in construction sites according to process showed that there was a difference between them according to the field of ordering, contract and supervision. There was the biggest difference between owner and contractor in double supervision system, but no difference between them in the perception of risk reduction. These results show that all ordering, contract and supervision are positively needed for the introduction of construction safety supervision. This means that there is a difference between owner and contractor in the perception of process according to system operation. All companies agree to system improvement by the settlement of safety supervision system for the prevention of safety accidents and safe construction, but the systematic complement of safety supervision is the burden of contractor. And there is a big difference between owner and contractor in the perception of responsibility and concern for cost burden.

The mortality rate in industrial accidents in South Korea was 11 per 100,000 workers in 2015. It’s five times higher than the OECD average. Economic losses due to industrial accidents continue to grow, reaching 19 trillion won much more than natural disaster losses equivalent to 1.1 trillion won. It requires fundamental changes according to industrial safety management. In this study, We classified the risk of accidents in industrial complex of Ulju-gun using spatial analytics and data mining. We collected 119 data on accident data, factory characteristics data, company information such as sales amount, capital stock, building information, weather information, official land price, etc. Through the pre-processing and data convergence process, the analysis dataset was constructed. Then we conducted geographically weighted regression with spatial factors affecting fire incidents and calculated the risk of fire accidents with analytical model for combining Boosting and CART (Classification and Regression Tree). We drew the main factors that affect the fire accident. The drawn main factors are deterioration of buildings, capital stock, employee number, officially assessed land price and height of building. Finally the predicted accident rates were divided into four class (risk category-alert, hazard, caution, and attention) with Jenks Natural Breaks Classification. It is divided by seeking to minimize each class’s average deviation from the class mean, while maximizing each class’s deviation from the means of the other groups. As the analysis results were also visualized on maps, the danger zone can be intuitively checked. It is judged to be available in different policy decisions for different types, such as those used by different types of risk ratings.

Korea`s industrial death rate is 13 percent in 2015. It’s five times higher than the OECD average. Economic losses due to industrial accidents continue to grow, reaching 19 trillion won in natural disaster losses equivalent to 1.1 trillion won, requiring fundamental changes in industrial safety levels. In this study, We classified the risk of accidents in industrial complex of Ulju-gun using spacial analysis and decision tree methodologies. We draw the main factors that affect the accident and developed the four risk category(alert, hazard, caution, and attention). It is judged to be available in different policy decisions for different types, such as those used by different types of risk ratings, targeted education, and technical support.

As a result of frequent occurrence of serious industrial accidents due to chemical substances, Korea Occupational Safety & Health Agency has been implementing the PSM system (process safety management) since 1996, and the target sites are required to submit process safety reports. In the semiconductor business, which is becoming smaller and more integrated as the technology advances, many of these hazardous chemicals are used. Most of the semiconductor sites are PSM target sites, and many devices are included in the PSM target equipment. This study optimizes the introduction and setup process of new equipments in the semiconductor workplace using harmful hazardous materials, and conducted an empirical study on the improvement of the safety risk, focusing on the S group semiconductor business, and applied the common standard of work under the PSM system This is an example of improving the risk of leakage of toxic gas components and waste of rework by arranging functions and risks in the space centering method