In Sri Lanka, the shoulder in asphalt pavements has been constructed using the materials transported from borrow pit in the iRoad Project due to the low quality of in-situ soils. After excavating 150~200mm thick and 500mm wide shoulder area, the borrow pit materials are placed and compacted according to specifications. The excavated in-situ soils are dumped in designated location. It is estimated that this process of shoulder construction is not economical due to high material transportation cost and can also induce the environmental issues by disposal of in-situ soils. It can also cause distresses such as surface rutting and edge drop-off in soft shoulder section due to bearing capacity failure and off-tracking of vehicle. The heavy rainfall in Sri Lanka can induce severe erosion problem when using the soft shoulder. To improve the strength and durability of pavement shoulders in the iRoad Project, the soil stabilization will be a good alternative to solve the above mentioned problems. The use of in-situ soils with addition of soil stabilizer enables to reduce the construction cost of shoulder section and mitigate the environment issues. The objective of this task is to review the application of soil stabilization method for soft shoulder construction in the iRoad Project. Firstly, the quantitative analysis of soil strength improvement due to soil stabilization was done for soil samples collected from iRoad construction sites. Two types of soils were selected from iRoad Project sites and prepared for soil stabilization testing by the Road Development Authority. Secondly, the appropriate stabilizer was selected at given soil type based on test results. Three different stabilizers, ST-1, ST-2, and ST-3, produced in Korea were used for estimating soil strength improvements. Finally, the optimum stabilizer content was determined for improving shoulder performance. The uniaxial compressive strength (UCS) test was conducted to evaluate the strength of stabilized soil samples in accordance with ASTM D 1633. The use of bottom ash as a stabilizer produced from power plant in Sri Lanka was also reviewed in this task.

The purpose of this study was to identify the effects of shoulder stabilization exercises and stretching on shoulder height and muscle activity in young adults with rounded shoulder posture. The subjects were young adults with rounded shoulder posture, and divided into two groups: shoulder stabilization exercises and stretching exercises. The shoulder stabilization exercise group performed Thera band exercises and stretching exercises. The stretching exercise group performed stretching exercises. The groups performed the exercises for 40min, three times a week for four weeks. Shoulder height was measure by Vanier calipers and muscle activity was measured by electromyography. Shoulder height was significantly decreased in both groups after intervention, however there was no difference between groups. There was a significant difference in muscle activity between the two groups after the intervention, however there was no difference between the groups. This study suggests that shoulder stabilization exercise and stretching affect shoulder height and muscle activity.

Background: Scapular downward rotation syndrome (SDRS) is a common scapular alignment impairment that causes insufficient upward rotation and muscle imbalance, shortened levator scapulae (LS) and rhomboid, and lengthened serratus anterior (SA) and trapezius. A modified shrug exercise (MSE), performing a shrug exercise with the shoulders at 150° abduction, is known as an effective exercise to increase scapular stabilizer muscle activation. Previous studies revealed that scapular exercise are more effective when combined with trunk stabilization exercises in decreasing scapular winging and increasing scapular stabilizer muscle activation. Objects: The purpose of our study was to clarify the effect of MSE with or without trunk stabilization exercises in subjects with SDRS. Methods: Eighteen volunteer subjects (male=10, female=8) with SDRS were recruited for this experiment. All subjects performed MSE under 3 different conditions: (1) MSE, (2) MSE with an abdominal draw-in maneuver (ADIM), and (3) MSE with an abdominal expansion maneuver (AEM). The muscle thickness of the lower trapezius (LT) and the SA were measured using an ultrasonography in each condition. Electromyography (EMG) data were collected from the LT, LS, SA, and upper trapezius (UT) muscle activities. Data were statistically analysed using one-way repeated analysis of variance at a significance level of .05. Results: The muscle thickness of the LT and the SA were the significant different in the MSE, MSE with ADIM (MSE+ADIM) and MSE with AEM (MSE+AEM) conditions (p<.05) In both LT and SA, the order of thick muscle thickness was MSE+AEM, MSE+ADIM, and MSE alone. No significant differences were found in the EMG activities of the SA, UT, LS, and LT in all condition. Conclusion: In conclusion, MSE is more beneficial to people with SDRS when combined with trunk stabilization exercises by increased thickness of scapular stabilizer muscles.

Walking method based zero moment position algorithms that can guarantee the stability of the biped walking robot while walking, but it moves the legs for the stability of the walking in a way that is not related to energy conservation. Walking method using ZMP can cause low battery efficiency and load on leg joints. The walking method using the passive walking, which is a natural and efficient method of walking, can reduce the load on the joints of the robot by using the method without using the inertia that occurs when walking and reduced control elements and efficient use of battery. In this paper, a biped robot with an actuator based on the principle of passive dynamic walker mechanism is applied to a passive walking algorithm. In order to solve the problem of stabilization of the posture during walking, the posture was stabilized by using the swing motion of the arm. and the walking movement of the robot was observed using the AHRS sensor applied to the robot .It was confirmed that the posture can be stabilized based on measured values using AHRS.

Background: Shoulder stabilization commonly involves two components: the glenohumeral stabilization exercise (GSE) and scapular stabilization exercise (SSE). Despite the fact that the shoulder stabilization has advantageous merit, to our knowledge, only a few studies have compared the superior of the GSE and the SSE. Objects: The purpose of this study was to assess the effects of GSE in patients with nonspecific shoulder pain. Methods: Thirty subjects with nonspecific shoulder pain were randomly divided into an experimental group and control group, each with 15 patients. The experimental group used an GSE, whereas the control group did SSE. All subjects were measured in shoulder stability, scapular symmetric alignment, pain, muscle power, and range of motion before and after the intervention. Results: GSE resulted in significantly better shoulder stability (p=.046, from 8.67±7.54 score to 13.93±9.40) in the experimental group compared with SSE in the control group. However, no significant effects were observed for scapular symmetric alignment including the angles of inferior scapular distance (p=.829) and inferior scapular height difference (p=.735), pain (p=.113), muscle power including shoulder flexion (p=.723) and abduction (p=.897) and range of motion including shoulder flexion (p=.853) and abduction (p=.472). Conclusion: These findings suggest that GSE may be more effective in increasing the shoulder stability than the SSE in patients with nonspecific shoulder pain, probably through a centralization effect on the shoulder mechanism.

Cellulose fibers were stabilized by treatment with an electron-beam (E-beam). The properties of the stabilized fibers were analyzed by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis. The E-beam-stabilized cellulose fibers were carbonized in N2 gas at 800°C for 1 h, and their carbonization yields were measured. The structure of the cellulose fibers was determined to have changed to hemicellulose and cross-linked cellulose as a result of the E-beam stabilization. The hemicellulose decreased the initial decomposition temperature, and the cross-linked bonds increased the carbonization yield of the cellulose fibers. Increasing the absorbed E-beam dose to 1500 kGy increased the carbonization yield of the cellulose-based carbon fiber by 27.5% upon exposure compared to untreated cellulose fibers.

Background: Lumbar stabilization (LS) improve the thickness of the quadratus lumborum (QL) muscle and muscle activity of the gluteus medius (GM) muscle during hip abduction in a side-lying position in patients with low back pain (LBP). Objects: The purpose of this study was to assess the effects of LS on muscle thickness of QL and muscle activity of GM during hip abduction in side-lying in patients with LBP. Methods: The study included 32 patients with LBP, who were randomly divided into the control group and experimental group, each with 16 patients. All subjects performed 35° preferred hip abduction (control group) and 35° hip abduction with LS (experimental group) during side-lying. An ultrasonography and a surface electromyography were used to measure the thickness of the QL muscle, and the muscle activities of the GM muscle respectively. Independent t-test was used to compare the muscle thickness of the QL and the muscle activity of the GM muscle, respectively. Results: Anterio-posterior diameter in the muscle thickness of QL muscle was decreased significantly in hip abduction with LS more than in preferred hip abduction (p<.001), but medio-lateral diameter in the muscle thickness of QL muscle was not significantly different between in preferred hip abduction and in hip abduction with LS (p=.06). The muscle activity of GM was increased significantly in hip abduction with LS more than in preferred hip abduction (p<.001). Conclusion: These findings suggest that hip abduction with LS could be recommended as a hip abduction for LS and a prevention unwanted compensatory pelvic lateral tilting movement.

The purpose of this study is to assess the effects of outlook project for olive flounder, from the view point of price stabilization, market efficiency, and causality of the prices in different distribution channels. Analytical results show that the volatility of producer price of olive flounder has been significantly mitigated after the implementation of the outlook project. The market efficiency is estimated to be improved after implementing the outlook project although there is an inefficiency on price determination process in some producing regions. The causality test on the producer and wholesale price shows that producing stage leads the wholesale stage in forming the prices. It is found that Jeju leads the flounder price on the size of 500g and 2kg, while Wando leads the price of 1kg size. These estimation result as whole indicate that outlook project for olive flounder has accomplished the intended goals.

It is very important for the competitiveness and sustainable management of enterprises that the rapid changes in the managerial environments quickly and accurately are responded. For example, the large-scale investment accompanied by bad alternatives in accordance with misunderstanding of the managerial environments yields the huge cost and effort to modify and improve. In firm management, the quality of products and the productivity are influenced by changes of the endogenous factors yielded in manufacturing process and the exogenous factors as market, etc. These changes include not only changes in 4M (man, machine, material, method) but also those in the market, competitors, and technologies in the process of commodification, i.e., first, such disturbances make dispersion of the process big and odd. By Shewhart chart it can be checked that the process monitored is control-in or out. Business administration executes activities for input stabilization by monitoring changes in 4Ms, comparing with the standards, and taking measures for any abnormality. Second, TRM (technology road map) is to prospect product deployment and technological trend by predicting technologies in the competitive environment as the market, and to suggest the future directions of business. So, TRM must be modified and improved according to DR (design review) stages and changes in mass-production like input material change. Therefore, a role of TRM in input stabilization for reducing cost and man-hour is important. This study purposed to suggest that the environment changes are classified into endogenous factors and exogenous factors in production process, and then, quality and productivity should be stabilized efficiently through connection between TRM and input stabilization, and to prove that it is more effective for the display industry to connect TRM with input stabilization rather than to use TRM separately.

This study examined the effects of trunk stabilization exercise on balance and trunk control in children with spastic diplegia. Four children with ambulatory spastic diplegia participated in the trunk stabilization exercise program using a Both Sides Utilized (BOSU) ball, 30 minutes a day, two times a week for eight weeks. Outcome variables included the pediatric balance scale, trunk control movement scale and multifidus thickness using ultrasound image. After trunk stabilization exercise, there was statistically no significant improvement in pediatric balance scale, trunk control movement scale and multifidus thickness. However, individual outcomes were observed with some positive changes. Balance, trunk control movement, and thickness of multifidus were found to be improved. Trunk stabilization exercise using a BOSU ball could improve trunk control and increase the thickness of multifidus in children with spastic diplegia. Further investigation is needed to evaluate subjects according to type of cerebral palsy and to understand the relationship between postural control and gait.

The aims of the current study were to assess reliability of range of motion (ROM) measurement of glenohumeral internal rotation (GIR) with a pressure biofeedback stabilization (PBS) method and to compare the reliability between manual stabilization (MS) and the PBS method. In measurement of pure glenohumeral joint motion, scapular stabilization is necessary. The MS method in GIR ROM measurement was used to restrict scapular motion by pressing the palm of the tester’s hand over the subject’s clavicle, coracoid process, and humeral head. The PBS method was devised to maintain consistent pressure for scapular stabilization during GIR ROM measurement by using a pressure biofeedback unit. GIR ROM was measured by 2 different stabilization methods in 32 subjects with GIR deficit using a smartphone clinometer application. Repeated measurements were performed in two test sessions by two testers to confirm inter- and intra-rater reliability. After tester A performed measurements in test session 1, tester B’s measurements were conducted one hour later on the same day to assess the inter-rater reliability and then tester A performed again measurements in test session 2 for confirming the intra-rater reliability. Intra-class correlation coefficient (ICC) (2,1) was applied to assess the inter-rater reliability and ICC (3,1) was applied to determine the intra-rater reliability of the two methods. In the PBS method, the intra-rater reliability was excellent (ICC=.91) and the inter-rater reliability was good (ICC=.84). The inter-rater and intra-rater reliability of the PBS method was higher than in the MS method. The PBS method could regulate manual scapular stabilization pressure in inter- and intra-rater measuring GIR ROM. Results of the current study recommend that the PBS method can provide reliable measurement data on GIR ROM.

이 논문은 산지계류를 횡단하여 개설된 작업로가 계류환경의 물리적 변화에 미치는 영향을 파악하고, 이를 조절하기 위하여 시공된 버트리스식 사방댐의 영향에 대하여 검토하였다. 그 결과, 작업로 개설 이후에는 열악한 수문조건, 즉 적은 강우량, 약한 강우강도와 소류력에도 불구하고 작업로 개설 이전에 비하여 극심한 계상변동 및 계상재료의 입경변화가 나타났다. 이는 작업로가 계류를 횡단하여 개설됨에 따라 계상의 저사공간이 파괴됨으로써 자갈이나 호박돌 등의 조립질층과 이들 사이에 분포하던 세립질 토사가 선택적으로 이동 및 재분포하였기 때문인 것으로 사료된다. 이와 같은 계상변동 및 계상재료의 변화는 버트리스식 사방댐의 존재여부와 이에 포착된 계상재료의 성분별 포착순서에 크게 영향을 받을 것으로 판단된다. 따라서 임산물 반출의 편의성을 중심으로 한 작업로 개설의 문제점 해결과 재해에 강한 작업로 개설을 위한 지침을 마련하여야 할 것이다.

Carbon fibers are prepared by stabilizing pitch fibers accompanying electron beam (E-beam) irradiation. The carbon fibers pretreated by E-beam irradiation achieve a higher stabilization index than the carbon fibers that are only heat-stabilized. In addition, the carbon fibers subjected to E-beam irradiation in the stabilization step exhibit a comparable tensile strength to that of general purpose carbon fibers. The carbon fibers pretreated with an absorbed dose of 3000 kGy have a tensile strength of 0.54 GPa for a similar fiber diameter. Elemental, Fourier-transform infrared spectroscopy, and thermogravimetric analyses indicate that Ebeam irradiation is an efficient oxidation and dehydrogenation treatment for pitch fibers by showing that the intensity of the aliphatic C–H stretching and aromatic CH2 bending (out-ofplane) bands significantly decrease and carbonyl and carboxylic groups form.

본 연구에서는 비소 오염 토양의 안정화소재로서 주로 사용되고 있지만 그 품질관리가 어려운 제강슬래그의 재료적 특성을 파악하기 위한 기초적인 실험을 수행하였다. 제강슬래그의 입도에 따른 화학적 성질의 변화와 비소 안정화에 중요한 성분인 Fe 성분의 입도에 따른 용출특성 그리고 제강슬래그의 주요 성분인 철(Fe)과 칼슘(Ca) 성분의 구성 비율이 비소의 흡착에 미치는 영향 등에 대해서 흡착실험을 실시하여 관찰하였다. 제강슬래그의 입도는 화학적 성질에 영향을 주지는 못하는 것으로 나타났다. 그러나 용출은 입도가 작은 분말상태에서 높게 나타났으나 pH=2 조건에서만 용출이 발생되어 실제 자연상태에서 용출이 일어나기는 어려울 것으로 판단되었다. 철과 칼슘성분의 혼합비에 따른 비소의 흡착실험에서는 철과 칼슘이 일정비율 섞여 있는 경우에서 효과가 매우 우수한 것으로 나타났으며, 철이나 칼슘 성분 모두 25%이상만 혼합되면 비슷한 효과를 나타내는 것으로 보인다. 한편 칼슘만 존재하는 경우에는 초기의 효과는 높았으나 시간이 경과하면서 재용출 현상이 나타나 적당하지 않은 것으로 나타났으며, 철 성분만 사용한 경우에는 초기 효과는 낮았으나 시간이 경과하면서 흡착효과가 지속적으로 증가하는 것으로 나타나 장기효과가 높을 것으로 기대되었다.

This study aimed to examine the most effective exercise method for shoulder joint rehabilitation by comparatively observing activity of shoulder stabilizer muscles during push up and push up plus exercises under diverse stable conditions. The subjects were 20 healthy adults students who went to M university. While the subjects conducted push up and push up plus exercises under diverse stable conditions(a stable surface, a support of 25cm height, a support of 30 cm height and a balance pad), activities of the upper trapezius muscle, pectoralis major muscle, serratus anterior muscle, and triceps brachii muscle were recorded. During push up and push up plus exercises, activities of the stabilizer muscles were higher when the stable condition was changed rather than on the stable surface. In particular, when the support of 30cm height and balance pads were applied, activity of the shoulder stabilizer was highest. There were significant differences in the upper trapezius muscle and triceps brachii muscle during the push up exercise(p<.05) and in the serratus anterior muscle during the push up plus exercise(p<.05). Activities of the shoulder stabilizers were higher when the upper and lower limbs' surface stable conditions were changed than the stable surface. Therefore, when programs for rehabilitation of shoulder joints are applied, provision of diverse stable conditions according to patients' conditions will be effective methods.

This study aimed to investigate the effect of the abdominal drawing-in maneuver (ADIM) and abdominal expansion maneuver (AEM) on trunk stabilization, as well as trunk muscle activities and differences in quadruple visual analogue scale, Korean Oswestry Disability Index, and Fear Avoidance Beliefs Questionnaire scores, in patients with chronic low back pain and lumbar spine instability. To increase intra-abdominal pressure during the trunk stabilization exercise, the technique of pushing the abdomen out using diaphragmatic abdominal breathing suggested by Pavel Koral was used, which we termed the AEM. Fifty patients who tested positive on more than three of the five lumbar spine instability tests were separated from 138 patients with chronic low back pain of these patients, 16 were placed in the control group (trunk stabilization exercise), 17 were placed in the ADIM group (trunk stabilization exercise with ADIM), and 17 were placed in the AEM group (trunk stabilization exercise with AEM). Each group participated in the study for 30 minutes three times weekly for 4 weeks. Surface electromyography was used to measure the trunk muscle activities during the kneeling forward and supine bridging positions, and one-way repeated analysis of variance was used to determine the statistical significance of the trunk muscle activities in the rectus abdominis, internal oblique (IO), erector spinae, and multifidus (MF) muscles. The ADIM and AEM groups showed relatively larger improvements in psychosocial and functional disability level than control group. There were significant changes among the three groups, those from the measured values of the AEM group was significantly higher than the other two groups in changes in IO and MF trunk muscle activities (p＜05). This finding demonstrates that trunk stabilization exercises with AEM is more effective than ADIM for increasing trunk deep muscle activity of chronic low back pain patients with lumbar spine instability.

New precursors, poly(acrylonitrile-co-crotonic acid) (poly(AN-CA)) and poly(acrylonitrile-co-itaconic acid-co-crotonic acid) (poly(AN-IA-CA)) copolymers, for the preparation of carbon fibers, were explored in this study. The effects of comonomers with acidic groups, such as crotonic acid (CA) and/or itaconic acid (IA), on the stabilization of nanofibrous polyacrylonitrile (PAN) copolymers were studied. The extent of stabilization, evaluated by Fourier transform infrared spectroscopy, revealed that the CA comonomer could retard/control the stabilization rate of PAN, in contrast to the IA comonomer, which accelerated the stabilization process. Moreover, the synthesized PAN copolymers containing CA possessed higher Mv than those of the IA copolymers and also showed outstanding dimension stability of nanofibers during the stabilization, which may be a useful property for improving the dimensional stability of polymer composites during manufacturing.

Lumbopelvic stabilization exercise has become the most popular treatment method in lumbar rehabilitation since its effectiveness was shown in some aspects of pain and disability. The abdominal drawing-in maneuver (ADIM) has been extensively implemented to promote lumbopelvic stability. However, performing ADIM correctly is difficult even for healthy subjects, and it is time consuming to train people in ADIM. Thus, the purpose of this study was to compare abdominal muscle [rectus abdominalis (RA), external oblique (EO), and transverse abdominis/internal oblique (TrA/IO)] activity during lumbopelvic stabilization exercises (ADIM only, ADIM with a ball, maximum exhalation only, and maximum exhalation with a ball) performed in a supine position with feet against a wall. Fifteen healthy subjects were recruited for this study. Surface electromyography was used to measure abdominal muscle activity during lumbopelvic stabilization exercises. A one-way repeated-measures analysis of variance was used to determine the statistical significance of RA, EO, and TrA/IO muscle activity during four lumbopelvic stabilization exercises. Both-side TrA/IO muscle activity was significantly greater with maximum exhalation with a ball than with ADIM only or ADIM with a ball (p<.008). The results of this study suggest that maximum exhalation with a ball can be used as an effective lumbopelvic stabilization exercise to increase TrA/IO muscle activity in healthy subjects.

A fiber-optic reference signal transmission system, which transmits the 1.4 GHz reference signal from H-maser to receiver cabin in radio telescopes, was adopted for compensating the phase changes due to temperature variation and antenna movement. At the first experiment, the remote signal’s phase changed more than 15 degrees at 1.4 GHz. We found unstable components in sub-system experiments and replaced them. The main cause of unstable phase stability was the unaligned polarization axis between Laser Diode and Mach-Zehnder Modulator (MZM). The improved system stability showed 1 × 10-16 allan standard deviation at 1,000 sec integration time with the antenna fixed. When the antenna moves in the azimuth axis, the 1.4 GHz remote signal showed the phase change smaller than 0.2 degrees.

본 연구는 식품으로 사용하고 있는 유산균의 보존성과 안정성을 높이고, 맛과 시각적인 차별화를 주기 위한 방법으로 더블매트릭스 캡슐화에 대한 제조방법에 대하여 기술하였다. 일차캡슐화방법으로 5wt%의 슈크로스에스터를 이용하여 부드럽고 촉촉한 크림을 만들었다. 더블매트릭스캡슐화는 키토산과 아르긴산을 1:3의 비율로 혼합하여 제조하였을 때 가장 안정한 캡슐이 형성되었다. 더블매트릭스 캡슐입자의 크기는 지름이 3mm이었다. 유산균의 pH변화에 대한 활성은 산성(pH=4.3±0.3)이나 중성(pH=7.12±0.2)상태에서보다 알칼리성 (pH=10.5±0.3)에서 더욱 우수한 활성을 보였다. 1개월 경과 후에서도 살아있는 유산균의 활성을 확인할 수 있었다. 식품산업에 응용으로 요거트안에 유산균캡슐이 함유된 제형과 5가지의 색상을 입힌 더블매트릭스캡슐을 개발하였다. 이상의 결과로 볼 때, 유산균을 안정화시키는 방법의 하나의 도구로써, 더블매트릭스캡슐이 식품산업에 크게 기여할 것으로 기대된다. 더 나아가 의약품산업에서 인슐린 등의 캡슐화를 통한 약물전달시스템 (drug delivery system) 및 화장품산업에서의 활성성분의 안정화 기술에 응용이 가능할 것으로 기대한다.