In this paper, the effect of steel fiber-reinforced cement composite (SFRCC) on damage resistance of steel tube member. Test results show that the cumulative energy dissipation of SFRCC specimen was about 14% higher than that of Con specimen.

In this study, the fiber blending ratio and strain rate effect on the tensile behavior of hybrid fiber reinforced cement composite was evaluated. Hooked steel fiber and polyvinyl alcohol fiber were used for reinforcing fiber. The fiber blending ratio of HSF+PVA were 1.5+0.5, 1.0+1.0 and 0.5+1.5vol.%. As a results, the tensile strength, strain capacity and fracture toughness of the hooked steel fiber reinforced cement composites were improved by the increase of the bond strength of the fiber and the matrix according to increase of strain rate. However, the tensile stress sharply decreased after the peak stress because of the decrease in the number of straightened pull-out fibers by micro cracks in the matrix around hooked steel fiber. On the other hand, PVA fiber showed cut-off fracture at strain rate 10-6/s with multiple cracks. However, at the strain rate 101/s, the multiple cracks and strain capacity were decreased because of the pull-out fracture of PVA fiber. The HSF1.5PVA0.5 shown the highest tensile strength because the PVA fiber suppressed the micro cracks in the matrix around the hooked steel fiber and improved the pull-out resistance of hooked steel fiber. Thus, DIF of strain capacity and fracture toughness of HSF1.5PVA were greatly improved. In addition, the synergistic response of fracture toughness was positive because the tensile stress was slowly decreased after the peak stress by improvement of the pull-out resistance of hooked steel fiber at strain rate 101/s

In this study, it evaluate the electrical conductivity of fiber reinforced cement composite by Fiber type. Hooked-ended steel fiber, Smooth steel fiber and Amorphous metallic fiber were reinforced 2.0 vol.% in cement composites respectively. The electrical conductivity was evaluated by calculating the electrical resistivity of each specimen after measuring the electrical resistance.

The load-deflection curve and neutral axis changing curve, which were drawn by data from tests were analyzed. Both of steel fiber and reinforcing bar habe effect to induce the behavior of segmental U-shaped girder. The combination of 0.7% or 1.0% steel fiber and reinforcing bar sowed the effective ductle behavior of segmental U-shaped girder. The relationship of load-deflection and the crack pattern indicate that the appropriate combination are UFS1.0 and CFS1.0

The purpose of this study was to evaluate the tensile fracture behavior of fiber hybrid reinforced cement composite according to the strain rate. Experiment result, it was confirmed that the number of cracks and the strain capacity tended to decrease with increasing PVA fiber volume fraction at the strain rate of 101/s.

본 연구에서는 유압식 급속재하 시험 장치를 제작하여 변형 속도에 따른 후크형 강섬유 및 폴리아미드 섬유보강 시멘트 복합체의 압축강도 및 인장강도 특성을 평가하였다. 그 결과, 변형 속도가 증가함에 따라 압축강도, 최대 응력 점에서의 변형 및 탄성계수는 증가하였으 며, 섬유 종류 및 혼입률은 변형 속도에 의한 압축강도의 영향은 크지 않았다. 본 연구에서 평가된 압축강도의 DIF는 CEB-FIP model code 2010 에 비해 상회하였으며, ACI-349의 예측값과 유사한 경향이 나타났다. 인장특성의 경우에도 변형 속도가 증가함에 따라 인장강도와 변형능력 이 크게 향상되었다. 후크형 강섬유보강 시멘트 복합체는 변형 속도가 증가함에 따라 섬유와 매트릭스의 부착력이 증가하는 것에 의해 인장강 도와 변형능력이 크게 향상되었으며, 섬유가 매트릭스로부터 인발되는 파괴 특성이 나타났다. 한편, 폴리아미드 섬유보강 시멘트 복합체의 경 우 섬유와 매트릭스의 부착력이 크기 때문에 섬유가 매트릭스로부터 인발되지 않고 끊어지는 파괴 특성이 나타났으며, 폴리아미드 섬유보강 시멘트 복합체의 인장특성에 대한 변형 속도 효과는 섬유의 인장강도에 큰 영향을 받는 것으로 판단되었다. 이러한 결과로부터 폴리아미드 섬 유보강 시멘트 복합체의 인장강도에 대한 변형 속도의 효과는 후크형 강섬유의 부착력에 대한 민감도 보다 큰 것으로 사료된다.

In this study, it evaluate the Impact fracture properties of fiber reinforced concrete and fiber reinforced cement composite. The types of fiber are Hooked-ended steel fiber and it was mixed 0.5, 1.0 vol.% in concrete and 1.0, 2.0 vol.% in cement composites. The Impact resistance performance was evaluated by measuring the fracture grade, penetration depth and scabbing depth

In this study, it evaluate the Impact fracture properties of fiber reinforced concrete and fiber reinforced cement composite. The types of fiber are Hooked-ended steel fiber and it was mixed 0.5, 1.0 vol.% in concrete and 1.0, 2.0 vol.% in cement composites. The Impact resistance performance was evaluated by measuring the fracture grade, penetration depth and scabbing depth

This study has been suggested a model for the in-plane shear behavior of High-Performance Cement-free Fiber Composite Panels under biaxial stress states. The analytical model is verified by comparison of the analytical results with the experimental results for biaxial shaer test of Cement-free Fiber Composite Panels.

In this study, We evaluated the impact resistance of structural member using high performance fiber reinforced cementitous composite according to compressive strength. As the compressive strength of structural member using HPFRCC increased, the deflection of the structural member decreased. The highest resistance of deflection occurred at 180 MPa HPFRCC.

This is A Study on the Bond Performance of Synthetic Polymer Composite Waterproofing and Anticorrosion Method in accordance with PE Fiber Reinforcement. Test results, A Bond Performance of the Test Specimen was confirmed to have increased 37.5%. By PE Fiber Reinforcement.

This paper showed evaluations of mechanical performances of High-Performance Fiber Composite Mortar which made by cement free binders with Alkali-activated slag and PVA fibers with the volume fraction of 1~1.5%. Specimens were subjected to compressive, tensile and shear strength test and the test results showed their high performance mechanical characteristics.

An experimental study was performed to examine the effect of fiber content on the tensile behavior of PE fiber reinforced cement composite. The experiment with the range 0~2.0% fiber content revealed that 1.5% fiber content produced the greatest tensile strength and strain.

This paper showed evaluations of mechanical performances of High-Performance Fiber Composite Mortar which made by cement free binders with Alkali-activated slag and PVA fibers with the volume fraction of 1~1.5%. Specimens were subjected to compressive, tensile and shear strength test and the test results showed their high performance mechanical characteristics.

In this study, a half-precast composite concrete slab using a strain-hardening cementitious composites has been tested. To compare with RC slabs, the developed slab can minimize longtitudinal reinforcements and improve crack control through strain-hardening behavior of fiber cementitious composite.

본 연구는 SIFCON 형태의 고성능 강섬유보강 시멘트 복합체의 섬유혼입률에 따른 휨실험을 수행하였고, 실험결과를 바탕으로 휨성능을 평가하였다. 슬러리를 충전하는 형태로 일반 섬유보강시멘트와 달리 높은 섬유혼입률을 확보할 수 있는 장점을 가지고 있다. 주요 실험변수는 섬유혼입률 8.0%, 7.5%, 7.0%, 6.5% 및 6.0% 이며, 각 변수에 대한 휨강도 및 휨인성 특성을 분석하였다. 그 결과, 높은 섬유혼입률로 인하여 초기균열 발생 이후에도 계속적으로 하중이 증가하였으며, 최대강도 이후 충분한 잔류강도를 확보하였다. 또한 최대 50MPa 수준의 높은 휨강도를 발현하였으며, 섬유혼입률에 따른 휨강도 및 휨인성은 비례하여 증가하는 경향으로 나타났다.

This study investigated the flexural performance of high performance fiber reinforced cementitious composite (HPFRCC), which used high strength steel fibers with volume fraction 8%. Under the third-point loading using a closed-loop, servo-controlled testing system (ASTM 1609), load-deflection curves were obtained. The major test variables include silica fume replacement ratio 15% and exposure termperature, ambient and 400°C. The flexural strength was similar to the compressive strength and the absorbed fracture energy was relatively greater than other typical HPFRCC materials. This may be a composite reaction of the strong bonding between steel fiber and matrix and high compressive strength of the matrix itself. Once the specimens were exposed to high temperature 400°C the flexural strength decreased.

본 연구에서는 기존 강재브레이스 내진보강법이 가지는 좌굴문제 등 단점을 극복할 수 있는 중 저층 철근콘크리트 건축물에 효과적으로 적용할 수 있는 새로운 내진보강법을 개발하였다. Carbon Fiber Composite Cable (CFCC)을 이용하여 건축물 골조 외부에 X자 형태로 내진보강을 실시하고, 상부 및 하부 보 양 단부에 CFCC X-브레이싱을 고정하기 위해서 평판 및 돌출형 나사식 접합으로 내진보강을 실시하는 내진보강법으로서, 반복하중 실험을 통하여 내진보강 효과를 규명하였다. 실험체는 비교용 비보강 골조, 평판형 및 돌출형 CFCC X-브레이싱 내진보강 골조 실험체 총 3개를 제작하였다. 실험결과, 본 연구에서 개발한 CFCC 내진보강법은 강도증진형 내진보강법으로 드러났으며, 기존 강재브레이스 보강법 대비 중량증가가 거의 없으며, 재료자체가 압축에 대한 좌굴이 없으며, 경량이므로 시공성이 매우 우수하고 중량 및 체적대비 우수한 강도가 발휘될 뿐만 아니라 특히, CFCC의 직경을 변경함으로서 내진보강 목적 (강도 보강량)에 대응하여 내진성능을 쉽게 변화시킬 수 있는 장점이 있다.

The purpose of this paper is to verify the seismic strengthening effect of R/C buildings strengthened with the Carbon Fiber Composite Cable (CFCC) In this study, a three-story R/C building that constructed in the 1980s was selected, and its seismic performance before and after strengthening was evaluated based on the nonlinear dynamic analyses of members levels. The result indicated that the seismic strengthening effect of the proposed CFCC method was verified in terms of both strength and ductility demands, compared to the building before strengthening.