The Korean Air-Force aircraft maintenance depot paints the exterior of various aircraft, including high-tech fighters. Aircraft exterior painting is a maintenance process for long-term life management by preventing damage to the aircraft surface due to corrosion. The de-painting process is essential to ensure the quality of aircraft exterior paints. However, because the Korean Air-Force’s de-painting process is currently done with sanding or Plastic Media Blasting (PMB) method, it is exposed to harmful dust and harmful compounds and consumes a lot of manpower. This study compares the de-painting process currently applied by the ROK Air-Force and the more improved process of the US Air Force, and performs economic analysis for the introduction of advanced equipment. It aims to provide information that can determine the optimal time to introduce new facilities through Cost-Volume-Profit (CVP) analysis. As a result of the analysis, it was confirmed that the sanding method had the most economical efficiency up to 2 units per year, the PMB method from 3 to 21 units, and the laser method from 22 units or more. In addition, in a situation where the amount of de-painting work is expected to increase significantly due to the increase in fighters in future, BEP analysis was conducted on the expansion of the existing PMB method and the introduction of a new laser method. As a result of the analysis, it was confirmed that it is more economical to introduce the laser method when the amount of work exceeds the PMB work capacity(18 units per year). The paper would helpful to improve the productivity and quality of the Korean Air Force Aircraft maintenance depot through timely changes of facilities in the workplace in preparation for expansion.

The emergence of green methods for the synthesis of graphene-based composites became the gateway for the solution of pollution and economic synthetic methods. Herein, we reported a single step in situ synthesis of reduced graphene oxide sheets decorated with silver nanoparticles (CRG–Ag nanocomposite) using custard apple leaf extract as an effective reducing and stabilizing agent. The ultraviolet–visible, Fourier transform infrared and Raman techniques revealed a primary confirmation about the formation of the said nanocomposite. The X-ray diffraction studies confirmed the face-centred cubic crystal structure of silver nanoparticles (Ag NPs) of 30 nm in size. The high-resolution scanning electron microscope spectra revealed the uniform distribution of Ag NPs on the graphene sheets. This simple, novel and rapid approach enabled a facile production of homogeneously deposited Ag NPs on graphene sheets. Thus synthesized CRG–Ag nanocomposite showed excellent photocatalytic efficiency of 96% in 2 h under sunlight using methylene blue as a model pollutant.

This study was conducted to determine grazing intensity of growing Korean native goats(Capra hircus coreanae) on mountainous pasture. It was carried out to obtain basic information for improvement of mountainous pasture management and establishing feeding system of Korean native goat. A total of 20 goats were grouped by feeding systems [A mountainous pasture grazing group (Concentrated feed of 1.5% body weight, treatment 1, T1, n=10) and a barn feeding group (TMR, treatment 2, T2), n=10] to conduct study from April to September. The average forage productivity of the mountain pasture was 500.9 ± 61.41 kg/ha. The average dry matter intake in T1 was 0.64 and the calculated grazing intensity was 21 head/ha. In productivity, when the two treatments(T1, T2) were compared, the dry matter intake was about two to three times the difference. The average daily gain per day during the experiment was 63.3 in the mountain pasture and 120 g in barn feeding. When grazing, considering mountainous pasture productivity it is necessary to increase the productivity through proper feeding. The feed costs of black goats raised by grazing on the grassland in the same period showed an average 75% reduction compared to barn feeding. As a result of this study, it can be expected that a considerable reduction of feed costs can be expected in the breeding of Korean native black goat using the mountain pasture.

2008년부터 2010년까지 3년간 인삼재배 29농가를 대상으로 묘삼 이식기종별 경제성을 분석, 손익분기 규모를 추정하여 인삼재배농가의 생력화를 위한 기초 자료로 제공하고자 연구한 결과를 요약하면 다음과 같다. 1. 묘삼이식기종에 따른 이식작업의 생력화율은 관행이식 대비 모종이식기 16%, 기계이식기은 49%, 기계이식기는 63%정도의 노력이 절감되었다. 2. 묘삼 이식기에 따른 손익분기 규모를 분석한 결과, 관행이식 대비 기계이식기은 보조지원을 받지 않는 경우 0.9 ha, 기계이식기은 1.3 ha 정도에서 손익분기점이 나타났다.

The purpose of this study is to deliberate on design application for a structure of beam with partially restrained composite connection to CFT column. It was intended to apply an economic and stable component by adjusting stiffness ratio of column connection through partially restrained composite connection. As a result of the review of stability of the structure, it was confirmed that in case of a low-rise building as a moment frame, it could be resisted without brace, as stiffness was increased when taking advantage of partial restrained composite connection by composite action.

This paper presents an economic analysis for the travel aids service system for visually handicapped persons through RFID (Radio Frequency Identification). This research estimates both cost and economic effect of the service. By using input-output analysis technique, three kinds of repercussion effects - domestic production, value added, and workers induced by the travel aids service - are also calculated. To evaluate the profitability of the service, we investigate the procedures through which the service has an effect on the interested parties and develop formulas describing the procedures. The benefit of the service have been generally obtained by measuring the willingness to pay (WTP). This paper, however, obtains the monetary value of benefit by estimating the parameters of the formulas, so that a close improvement of the service may be possible with the result of the economic analysis.

본 연구는 제주 초지의 경제적 가치를 평가하여 보전의 타당성 및 정책지원 방안을 제시하기 위해 수행하였다. 경제적 가치를 추정함에 있어 환경적 가치, 사회문화적 가치로 나누어 평가하였으며 환경적 가치는 대체법을 이용하였고 사회문화적 가치평가는 일반적으로 많이 이용되고 있는 CVM 평가법을 적용하였으며 각종 Bias(편의)를 해결하기 위해 가상 상황을 설정하여 질문하는 이단계 이선선택법을 적용하였다. 제주초지의 다원적 기능은 토양침식방지, 홍수방지, 축산

This experiment was carried out to investigate the effect of pure mineral nitrogen fertilization on dry matter yield and to determine the amounts of advisable mineral nitrogen according to difference of annual precipitations in permanent grassland. The re

This experiment was carried out to determine the effect of pure mineral nitrogen fertilization on dry matter yield and the amounts of advisable mineral nitrogen on grassland according to its age at the "Federal Institue for Agriculture in the Alps" in Aus

This experiment was to study the effect of pure mineral nitrogen fertilizing on seasonal distribution of dry matter yield and the advisable mineral nitrogen amounts on grassland. The results were as follows: 1. With longer regrowth periods the absolute dr

This experiment was carried out to study the effect of pure mineral nitrogen fertilizing on dry matter yield of grassland and the advisable mineral nitrogen amounts in long duration under practical conditions at the "Federal Institute for Agriculture in t

The steel double-beam floor system is capable of reducing the construction period due to the weight reduction of the unit members compared to the general rigid-frame steel structure, thereby reducing the indirect construction cost due to the improvement of constructability. However, there is also a problem with the construction management caused by the increase in the number of members. Therefore, in this study, we will apply a combination of different spans of steel double-beam floor systems, to analyze the economic and story-reduction effects, and propose an optimal structural frame.

We compared the applicability and economical efficiency of peroxone process with those of ozone process in the existing water treatment plant on downstream of Nakdong River. After comparing the peroxone process for removing geosmin with the ozone process in lab scale test, peroxone process showed much higher removal efficiency than the ozone process at the same ozone dosage. Proper range of H2O2/O3 ratio were 0.5~1.0 and the half-life of geosmin was about 5.5~6.8 min when the H2O2/O3 ratio was set to 0.5 during 1~2 mg/L of ozone dosage. Peroxone process could reduce the ozone dosage about 50 to maximum 30% for the same geosmin removal efficiency compared to the ozone process in the pilot scale test. In case of 1,4-dioxane treatment, peroxone process could have 3~4 times higher efficiency than ozone process at the same ozone dosage. The results of estimating the economical efficiency of ozone and peroxone process for treating geosmin and 1,4-dioxane by using pilot scale test, in case of the removal target was set to 85% for these two materials, the cost of peroxane process could be reduced about 1.5 times compared to ozone process, and in the same production cost peroxone process could have 2~3 times higher removal efficiency than ozone process. The removal efficiency by peroxone process showed a large difference depending on the physicochemical characteristics of target materials and raw water, therefore detailed examination should be carried out before appling peroxone process.

본 연구에서는 대직경 고장력볼트 이음부의 안전성 및 경제성을 검토할 목적으로 F10T-M30 대직경 고장력볼트를 사용한 시험편을 대상으로 정적 인장시험을 실시하여 미끄러짐 특성을 평가하였다. 또한 유한요소해석을 실시하고 볼트의 강도등급 및 직경에 따른 소요볼트 개수를 산정하였다. 그 결과 M30 고장력볼트의 평균 미끄러짐 계수는 도로교설계기준의 기준인 0.4를 초과하며, M22 고장력볼트와 동등한 미끄러짐 성능을 확보하는 것으로 나타났다. 또한 고장력볼트의 강도등급 및 직경에 따른 경제성 분석을 실시한 결과, F10T-M22 고장력볼트를 기준으로 하여 F13T-M22 고장력볼트를 적용하면 소요볼트 개수가 21% 감소하며, F10T-M30 고장력볼트를 적용하면 46% 감소하는 것으로 나타나 고장력볼트의 대직경화에 따른 경제성을 확인할 수 있었다.

국내 컨테이너 터미널의 대부분 컨테이너 처리량에 비해 장치장 규모가 협소한 편이다. 장치장이 협소한 이유는 터미널 개발 시 적용된 이론적인 안벽 처리능력이 실제 처리능력과 차이가 나기 때문이다. 또한 최근 선박이 대형화 되면서 터미널들이 안벽장비를 추가 투입함으로써 안벽 생산성을 당초보다 크게 향상시킨 현실에 기인하기도 한다. 본 연구에서는 터미널 운영 현실을 반영하여 하역 능력을 재산정하고 10,000TEU에 이르는 초대형 선박을 대상으로 하여 소요 장치장 규모를 산정 한 후 기존 터미널의 장치장 규모와 경제성을 비교하는 것을 주목적으로 한다.