간행물
Journal of the Earthquake Engineering Society of Korea KCI 등재 한국지진공학회논문집
- 발행기관 한국지진공학회
- 자료유형 학술지
- 간기 격월간
- ISSN 1226-525x (Print)2234-1099 (Online)
- 수록기간 1997 ~ 2025
- 주제분류 공학 > 토목공학 공학 분류의 다른 간행물
- 십진분류KDC 531DDC 624
권호리스트/논문검색
제29권 제1호(통권 제163호) (2025년 1월) 11건
1.
2025.01
구독 인증기관 무료, 개인회원 유료
Reinforced concrete (RC) moment frames are widely used to resist lateral loads associated with wind and earthquakes. However, most older RC moment frames performed poorly against past earthquakes. In moment frames, beam-column connections play a crucial role in system performance. Among the connections, corner connections are more vulnerable because they are restrained by only two beams and are affected most strongly by bidirectional loading. High-performance fiber-reinforced cementitious composites (HPFRCC) were used in previous studies to improve the seismic performance of older beam-column connections. This study aims to evaluate the level of improvement of seismic behavior of older beam-column connections under bidirectional loading after retrofitted with HPFRCC by comparing the seismic behavior of the HPFRCC connections to beam-column connections used in intermediate (IMF) and special moment frames (SMF). Test results revealed that the seismic behavior of the HPFRCC connections was almost close to that of SMF connections.
4,000원
2.
2025.01
구독 인증기관 무료, 개인회원 유료
In stable continental regions, selecting appropriate ground motions for seismic design and dynamic response analysis presents significant challenges. This study evaluates the liquefaction potential of the Nakdonggang delta region, South Korea, by generating synthetic ground motion scenarios and applying a scenario-based liquefaction assessment approach. We utilized a hybrid broadband ground motion simulation method proposed by Graves and Pitarka (2010, 2015) to create bedrock ground motions for three hypothetical earthquakes (Mw 6.2 and 6.0) occurring along the Dongrae and Miryang faults. The generated synthetic ground motions were used as input for onedimensional nonlinear site response analyses, incorporating shear wave velocity profiles derived from surface wave inversion. The simulated ground motions demonstrated higher responses at short periods and relatively weaker responses at long periods compared to the Korean design spectra. This amplification of long-period components was attributed to the dynamic response of deep sedimentary layers, while high-frequency components were generally deamplified due to damping effects in shallow silty layers. Liquefaction susceptibility was assessed using surface ground motions derived from the site response analyses, following the SPT-based simplified method proposed by Idriss and Boulanger (2008). Results indicated high liquefaction potential across most sites for the Dongrae earthquake scenario, while liquefaction was unlikely for all sites under the Miryang-1 scenario. For the Miryang-2 scenario, liquefaction was predicted at some sites. Overall, liquefaction is expected at PGA values of approximately 0.13 g or higher, with sites exhibiting lower shear wave velocities being more vulnerable to liquefaction
4,300원
3.
2025.01
구독 인증기관 무료, 개인회원 유료
Being in a stable continental region (SCR) with a limited history of instrumentation, South Korea has not collected sufficient instrumental data for data-driven ground motion models. To address this limitation, we investigated the suitability of the hybrid ground motion simulation method that Graves and Pitarka (2010, 2015) proposed for simulating earthquake ground motions in South Korea. The hybrid ground motion simulation method used in this study relies on region-specific parameters to accurately model phenomena associated with the seismic source and the wave propagation. We initially employed relevant models and parameters available in the literature as a practical approach. We incorporated a three-dimensional velocity model developed by Kim et al. (2017) and a one-dimensional velocity model presented by Kim et al. (2011) to account for the crustal velocity structure of the Korean peninsula. To represent the earthquake source, we utilized Graves and Pitarka’s rupture generator algorithm along with a magnitude-area scaling relationship developed for SCR by Leonard (2014). Additionally, we assumed the stress and attenuation parameters based on studies of regional seismicity. Using the implemented platform, we simulated the 2016 Mw5.57 Gyeongju earthquake and the 2017 Mw5.4 Pohang earthquake. Subsequently, we compared results with recorded accelerations and an empirical ground motion prediction equation at strong motion stations. Our simulations had an overall satisfactory agreement with the recorded ground motions and demonstrated the potential of broadband hybrid ground motion simulation for engineering applications in South Korea. However, limitations remain, such as the underestimation of long-period ground motions during the 2017 Pohang earthquake and the lack of a model to predict the ground motion amplification associated with the near-surface site response accurately. These limitations underscore the importance of careful validation and refinement of region-specific models and parameters for practically implementing the simulation method.
4,000원
4.
2025.01
구독 인증기관 무료, 개인회원 유료
This study presents a seismic fragility assessment methodology incorporating the cumulative damage effects of repeated seismic loading on structures. Conventional seismic fragility assessment methods typically focus on single earthquakes across multiple structures; however, seismic events often occur in sequences, with each event adding cumulative damage that can amplify the overall damage. Ignoring the effects of repeated earthquakes in fragility assessments may lead to underestimating seismic risk. This study proposes a simplified but efficient fragility assessment method that accounts for repeated earthquake effects using probabilistic combinations of each damage state. This procedure applied the capacity spectrum method to consider capacity degradation from displacement caused by prior earthquakes. Applying various earthquake scenarios, this study analyzes the effects of damage accumulation from earthquake occurrence sequences, structural behavior types, and seismic design levels on the fragility of structures under repeated earthquake events.
4,000원
5.
2025.01
구독 인증기관 무료, 개인회원 유료
IIn the context of site response analysis, the use of shear wave velocity ( ) profiles that consider the seismological rock ( ≥ 3,000 m/s) depth is recommended. This study proposes regression analysis and machine learning-based models to predict deep profiles for a specialized excavated rock site in South Korea. The regression model was developed by modifying mathematical expressions from a previous study and analyzing the correlation between and model variables to predict deep beyond 50 m. The machine learning models, designed using tree-based algorithms and a fully connected hierarchical structure, were developed to predict from 51 m to 300 m at 1 m intervals. These models were validated by comparing them with measured deep profiles and accurately estimating the trend of deep variations. The proposed prediction models are expected to improve the accuracy of ground motion predictions for a specialized excavated rock site in Korea.
4,000원
6.
2025.01
구독 인증기관 무료, 개인회원 유료
There are now many seismic observatory stations, excluding the acceleration monitoring network for infrastructures, of more than 300 operated by several public and governmental organizations across South Korea. The features of the site and properties of the stations were not investigated, and they have been assumed or guessed to estimate the site-specific seismic responses during the 2016 Gyeongju and 2017 Pohang earthquake events. For these reasons, various and intensive geotechnical and geophysical investigations have been conducted to quantify the site characteristics at 15 seismic stations selected in southeastern Korea. The VS profiles were, at first, obtained by performing only a downhole seismic test (DHT) at 7 stations, and were compared with those from a surface wave method. Then, the shear wave velocity (VS) profiles were deduced by combining three types of in situ seismic methods composed of a cross-hole seismic test, DHTs, and full-waveform sonic loggings at the 8 other stations, especially to complement the application limits of DHT and reduce the depth-dependent uncertainty in VS profile. The representative site characteristic profiles for each station regarding VS and VP with borehole stratigraphy and density were determined based on robust investigations. Various site parameters related to seismic responses at the seismic stations of interest were obtained for the site-specific geotechnical information, which would be useful to earthquake engineering practices.
4,000원
7.
2025.01
구독 인증기관 무료, 개인회원 유료
In densely populated urban areas, reinforced concrete residential buildings with an open first floor and closed upper floors are preferred to meet user demands, resulting in significant vertical stiffness irregularities. These vertical stiffness irregularities promote the development of a soft-story mechanism, leading to concentrated damage on the first floor during seismic events. To mitigate seismic damage caused by the soft-story mechanism, stiffness-based retrofit strategies are favored, and it is crucial to determine an economically optimal level of retrofitting. This study aims to establish optimal seismic retrofit strategies by evaluating the seismic losses of buildings before and after stiffness-based retrofitting. An equivalent single-degree-of-freedom model is established to describe the seismic response of a multi-degree-of-freedom model, allowing for seismic demand analysis. By convolving the seismic loss function with the hazard curve, the annual expected loss (EAL) of the building is calculated to assess the economic losses. The results show that stiffness-based retrofitting increases first-story lateral stiffness by 20-40%, enhancing structural seismic performance, but also results in a rise in EAL compared to the as-built state, indicating lower cost-effectiveness from an economic perspective. The research concludes that retrofit options that increase first-story lateral stiffness by at least 60% are more appropriate for reducing financial losses.
4,000원
8.
2025.01
구독 인증기관 무료, 개인회원 유료
The primary purpose of this study is to develop system modules of school buildings and the seismic loss function of the system modules for regional loss assessment of school buildings. System modules of school buildings were developed through statistical analysis of school facilities in Korea. The structural system of school buildings with non-seismic details is defined as reinforced concrete with partially masonry walls (RCPM), and 27 system modules of RCPM were developed considering the number of stories, spans, and the age of the building. System modules were designed to assess the structural behavior by applying the shear spring model and the shear failure of the columns of the school building. Probabilistic seismic demand models for each component of system modules were derived through nonlinear dynamic analysis to determine the relationship between seismic intensity, drift ratio, and peak floor acceleration of system modules. The seismic loss function was defined as the total damage ratio, which is the ratio of replacement cost to repair cost to evaluate the seismic loss quantitatively. The system module-based seismic loss well predicted the observed data. It will be possible to help many stakeholders make risk-informed decisions for a region through the regional loss assessment of school buildings in Korea.
4,000원
9.
2025.01
구독 인증기관 무료, 개인회원 유료
Structures compromised by a seismic event may be susceptible to aftershocks or subsequent occurrences within a particular duration. Considering that the shape ratios of sections, such as column shape ratio (CSR) and wall shape ratio (WSR), significantly influence the behavior of reinforced concrete (RC) piloti structures, it is essential to determine the best appropriate methodology for these structures. The seismic evaluation of piloti structures was conducted to measure seismic performance based on section shape ratios and inter-story drift ratio (IDR) standards. The diverse machine-learning models were trained and evaluated using the dataset, and the optimal model was chosen based on the performance of each model. The optimal model was employed to predict seismic performance by adjusting section shape ratios and output parameters, and a recommended approach for section shape ratios was presented. The optimal section shape ratios for the CSR range from 1.0 to 1.5, while the WSR spans from 1.5 to 3.33, regardless of the inter-story drift ratios.
4,000원
10.
2025.01
구독 인증기관 무료, 개인회원 유료
The seismic performance of lead-rubber bearings (LRBs) is significantly affected by both the axial force and loading rate they experience. Accurate assessment of LRBs’ seismic performance, therefore, requires realistic simulation of these forces and rates, as well as of the response of the isolated structure during seismic events. This study conducted a series of real-time hybrid simulations (RTHS) to evaluate the seismic behavior of LRBs in such conditions. The simulations focused on a two-span continuous bridge isolated by LRBs atop the central pier, exposed to horizontal and vertical ground motions. In the RTHS framework, the LRBs were physically tested in the laboratory, while the remainder of the bridge was numerically modeled. Findings from these simulations indicated that the vertical ground motion had a minimal effect on the lateral response of the bridge when isolated by LRBs.
4,000원
11.
2025.01
구독 인증기관 무료, 개인회원 유료
Piloti-type buildings are widely constructed in urban areas of South Korea. Due to stiffness irregularities, piloti-type buildings are vulnerable to lateral loads such as earthquakes. Although seismic retrofitting is necessary for piloti-type buildings, many of these structures are privately owned, and the extensive number of buildings creates significant challenges in terms of cost and time for regional seismic performance evaluation. This study proposes a methodology for determining the seismic performance of multiple piloti-type buildings within a region by utilizing structural parameters. Information on piloti-type buildings is classified into public building data and exterior building data, which are integrated to define structural parameters for estimating the first natural period of the buildings. Linear regression analysis was performed to develop a regression equation correlating structural parameters with the natural period. Additionally, the natural period and structural parameters are used to perform another linear regression analysis to estimate the yield and ultimate points of the capacity curve. The capacity curves derived from the regression equations facilitate seismic performance evaluation based on structural parameters.
4,000원
