간행물
한국구조물진단유지관리공학회 논문집 KCI 등재 Journal of The Korea Institute for Structural Maintenance and Inspection
- 발행기관 한국구조물진단유지관리공학회
- 자료유형 학술지
- 간기 격월간
- ISSN 2234-6937 (Print)2287-6979 (Online)
- 수록기간 1997 ~ 2020
- 주제분류 공학 > 안전공학 공학 분류의 다른 간행물
- 십진분류KDC 531DDC 624
권호리스트/논문검색
Vol.21. No.1 (2017년 1월) 166건
101.
2017.01
서비스 종료(열람 제한)
In this study, it evaluate the Impact fracture properties of fiber reinforced concrete and fiber reinforced cement composite. The types of fiber are Hooked-ended steel fiber and it was mixed 0.5, 1.0 vol.% in concrete and 1.0, 2.0 vol.% in cement composites. The Impact resistance performance was evaluated by measuring the fracture grade, penetration depth and scabbing depth
102.
2017.01
서비스 종료(열람 제한)
This paper was evaluated manufacturing properties for core material of self-healing capsules using cement powder, it was found that coagulants for coagulation of core materials were important factors in manufacturing core materials.
103.
2017.01
서비스 종료(열람 제한)
In this study, cement mortar (KS F 4042) used for repairing concrete structures was evaluated for compressive strength and bond strength according to the mixing ratio of polymer. From the experimental results, it was confirmed that as the polymer content increases, the bond strength properties increase, but the compressive strength decreases slightly at a certain rate.
104.
2017.01
서비스 종료(열람 제한)
105.
2017.01
서비스 종료(열람 제한)
From the test results, it was found that the compressive strength and the resistance of chloride ion penetration were evaluated the slag content of the concrete for bridge pavement. Compressive strength test results showed that initial strength was decreased as slag replacement ratio increased. The chlorine ion penetration performance increased with increasing strength.
106.
2017.01
서비스 종료(열람 제한)
In order to reduce self-weight of structural elements, the use of SCP(Steel Concrete Plate) is getting increased. Since SCP has complicated sectional shape and includes large amount of studs, the use of high-filling concrete is required. Therefore, in this study, It was evaluated the filling performance of filling concrete for SCP module according to our mix proportion. Resultingly, the concrete effectively filled the large-sized SCP module.
107.
2017.01
서비스 종료(열람 제한)
In recent years, in order to reduce self-weight of structural elements, the use of SCP(Steel Concrete Plate) is getting increased. Since SCP has complicated sectional shape and includes large amount of studs, the use of shrinkage reduction concrete is required. Therefore, in this study, to prevent the restrained shrinkage behavior by stud, the effects of using expansive agent (EA) and shrinkage reducing agent (SRA) was investigated.
108.
2017.01
서비스 종료(열람 제한)
The flowability and compressive strength were evaluated to examine the effect of biner mixing ratio on the high-fluidity concrete with low binders. When the binder mixing ratio (OPC, BFS, FA) was 7:2:1, It was most suited for high-fluidity concrete with low binders by increasing workability and compressive strength.
109.
2017.01
서비스 종료(열람 제한)
The mechanical properties were evaluated to examine the optimum adding amount of AC and UT viscosity agent by mixing two viscosity agent according to the adding ratio. When the ratio of AC and UT viscosity agent was 5:5, It was most suited for high-fluidity concrete with low binders by increasing workability and effect of reducing viscosity.
110.
2017.01
서비스 종료(열람 제한)
The airborne chlorides environment by de-icing salts of the Suam road tunnel in motorway were examined. It was found that higher airborne chlorides were detected inside road tunnel than outside. Therefore, there is a need to appreciate that RC structures inside tunnel might be exposed to salt attack environment
111.
2017.01
서비스 종료(열람 제한)
In this study, Retarder, which shows characteristics of delay hydration reaction and reduce hydration heat in concrete, was processed through granulation and paraffin coat to induce reation by hydration heat. Concrete with Granulated and paraffin coated retarder were prepared and compressive strength was measured by curing at 20℃ and 40℃. As a result, it was confirmed that retarder exhibits performance depending on the curing temperature.
112.
2017.01
서비스 종료(열람 제한)
For the use of recycled aggregate concrete, the early strength is evaluated. The test variables are replacement ratio of recycled aggregate, steel fiber and blast furnace slag powder. For this, 6th concrete mixing plan is prepared. As a result, it is evaluated that the early strength depends on the steel fiber volume fraction and replacement ratio of blast furnace slag powder.
113.
2017.01
서비스 종료(열람 제한)
In this study, Early compressive strength analysis of low carbon mortar using industrial byproducts and describes relationships between strength property and CO2 indices to evaluate eco-efficient of low carbon binder mortar. Based on the results, this study is to give fundamental data for ability of eco-efficient low carbon binder.
114.
2017.01
서비스 종료(열람 제한)
The purpose of this experimental study is to investigate the application of materials of construction with MWNT and TiO2. high performance nano MWNT-TiO2 carrier was fabricated by sol-gel method and performance analyzed by XRD and SEM. As a result, high performance nano MWNT-TiO2 carrier was no significant differences in coating state, crystallinity and microstructure.
115.
2017.01
서비스 종료(열람 제한)
This paper presents an experimental study to evaluate complex deterioration resistances of concretes according to addition of modified sulfur. The complex deterioration tests were performed to concretes with freezing-thawing and deicing chemicals. From the test result, it was confirmed that the complex deterioration resistances of modified sulfur cement concrete was higher than that of normal concrete.
116.
2017.01
서비스 종료(열람 제한)
In this study, experiment and analysis of high-strength bolt connection under shear fatigue loading was conducted to evaluate reduction of axial force of bolt. Three type of bolt size and initial axial force were applied to specimens. As a results, it was observed that the reduction ratio of axial force, and that would be used to additional parametric study.
117.
2017.01
서비스 종료(열람 제한)
In the sliding slab track of railway bridge, a lateral support block is used to control the lateral displacement. Therefore, it is important to analyze the behavior of dowel rebar and the lateral support block of the sliding slab track. In this study, high strength concrete and steel rebar was selected to analyze the behavior of dowel rebar and shear behavior of high strength dowel rebar and the lateral support block were compared to the equations developed by Soroushian et al. (1986) and CEB-FIP (2010).
118.
2017.01
서비스 종료(열람 제한)
In general, polymer cement mortars that is made from organic polymer dispersion and cement have good workability compared with ordinary cement due to ball-bearing acting of polymer particles in cement mortar. The purpose of this study is to evaluate the workability of cement mortar according to adding of admixtures such as polymer dispersions, blast-furnace slag and fly ash. From the test results, the flow of polymer-modified mortars is increased with increasing polymer-cement ratio, and also is a little improved according to adding of fly ash compared to blast-furnace slag.
119.
2017.01
서비스 종료(열람 제한)
The purpose of this study is to estimate the permeability coefficient of concrete using mass hydrophobation agent. Experiments were carried out by making concrete specimens with different amounts of mass hydrophobation agent. It is considered that the pores are filled in the internal structure of the concrete by the expansion of the mass hydrophobation agent.
120.
2017.01
서비스 종료(열람 제한)
The purpose of this study was to evaluate flowability of engineered cemetitious composite(ECC) Using blast furnace slag and fly ash as a binder in mixture. From the test result, flowability value of all ECC mixtures show good flowability and self compacting performance.
