기술의 발전과 가상현실의 세계에서 즐기는 디지털 여가에 대한 수요와 관심이 증대되고 있다. 그런 디지털 여가 활동의 하나로 도심형 디지털 테마파크가 부상하고 있다. 그에 따라 국내에서 다양한 디지털 테마파크가 제작되었지만, 성공적인 흥행을 이루지 못하며 후발 주자를 이끌지 못하고 있다. 따라서 본 논문에서는 이런 현상을 인간의 욕구를 단계에 따라 만족시켜 무아의 경지인 절경경험을 이뤄낸다는 매슬로의 욕구이론과 조셉캠벨의 영웅의 여정단계를 바탕으로 테마파크의 공간 및 게임 요소에 대한 분석을 시도하였다. 본 연구에서 게임기반 테마파크 분석을 위해 사용되는 모형은 향후 다양한 도심형 디지털 테마파크 발전의 초석이 될 것이다.
본 연구는 음악과 유저의 움직임 간의 자유로운 인터랙션에 주목하는 리듬댄스 게임의 사용 자 친화적 게임 플레이 방식을 제안한다. 기존의 리듬댄스 게임들은 사용자의 움직임과 개성적 인 춤에 제한을 부여하게 되는데, 이 제한을 최소화하는 방식으로 본 연구는 댄스음악에서 가 장 기본 토대를 이루는 비트값을 사용하는 게임 방식을 선택하였다. 음악의 비트를 느끼는 방 식은 어깨, 무릎, 고개의 세부분으로 나누어 키넥트를 통해 추출된 각 신체 포지션 값으로 자동 적으로 파악된다. 이를 통해 사용자는 게임의 정해진 규칙이 아닌 자신의 춤을 추는 개인적 방 식으로 게임을 즐길 수 있게 된다.
This paper presented to study used Abaqus on steel plate bonded reinforcement technology for column to beam connections, and then the result showed that steel plate bonded reinforcement technology has great reinforcement effect for RC column to beam joint. Also the steel plate bonded reinforcement technology was safety and convenient operation.
This paper presents a laboratory validation for a Finite Element model updating method using moving vehicle input-deflection output measurements. In conventional FE model updating, a few natural frequencies measured from field experiments have been used to update the FE model based on the assumption that the mass matrix is known accurately. The proposed approach can update the stiffness matrix without the assumption by using static input-output measurements and can even update the mass matrix by using a few natural frequencies obtained from dynamic measurements. Laboratory experiments were carried out for a scaled model of Samseung Bridge located in the test road of Korea Highway Corporation. For a simplicity of experiments, a mass (11kgf) was located in four different locations on the deck and two deflections were measured by laser displacement meters: one at the center girder, and the other in at the outer girder, both in mid-span. Results showed that the proposed methods was capable to estimate Young's Modulus and the mass density of the model bridge accurately while natural-frequency-based updating may result in significant error when higher modes (2nd, 3rd) were used.
The purpose of this study was to investigate the strain characteristics of frame retrofitting grid-type seismic member. The experimental investigation consisted of a cyclic load tests of one story-one bay reinforced concrete frame retrofitting grid-type seismic member.
Because significant difference between normal concrete and fiber reinforced ultra-high strength concrete under tension and compression, bond behavior also have significant difference. Based on the finite element analysis of bond test specimens, crack initiation and propagation process were investigated. Analysis results have been validated with test results and crack initiation stress was investigated.
In this paper, the strategy of the research project was introduced to develop the safety evaluation factors and the monitering system of underground lifelines against the ground subsidence. This study will be carried out in three steps of concept design, critical technique development and technique verification.
This study proposes a FE model updating strategy based on data fusion of acceleration and angular velocity. The use of acceleration and angular velocity gives richer information than the sole use of acceleration, allowing the enhanced performance particularly in determining the boundary conditions. A numerical simulation is presented to demonstrate the proposed FE model updating approach using the data fusion.
Recent climate change has led to fluctuations in agricultural production, and as a result national food supply has become an important strategic factor in economic policy. As such, in this study, panel data was collected to analyze the effects of seven meteorological elements on the production of five types of grain with error component panel data regression method following the test results of LM tests, Hausman test.
The key factors affecting the production of rice were average temperature, average relative humidity and average ground surface temperature. The fluctuations in the other four grains types are not well explained by meterological elements. For other grains and beans, only average temperature and time (year) affect the production of other grains while average temperature, ground surface temperature, and time (year) influence the production of beans. For barley and millet, only average temperature positively affects the production of barley while ground surface temperature and time (year) negatively influence the production of millet.
The implications of this study are as follow. First, it was confirmed that the meteorological elements have profound effects on the rice production. Second, when compared to existing studies, this study was not limited to rice but encompassed all five types of grains and went beyond other studies that were limited to temperature and rainfall to include various meteorological elements.
The finite element (FE) model updating is a commonly used approach in civil engineering, enabling damage detection, design verification, and load capacity identification. In the FE model updating, acceleration responses are generally employed to determine modal properties of a structure, which are subsequently used to update the initial FE model. While the acceleration-based model updating has been successful in finding better approximations of the physical systems including material and sectional properties, the boundary conditions have been considered yet to be difficult to accurately estimate as the acceleration responses only correspond to translational degree-of-freedoms (DOF). Recent advancement in the sensor technology has enabled low-cost, high-precision gyroscopes that can be adopted in the FE model updating to provide angular information of a structure. This study proposes a FE model updating strategy based on data fusion of acceleration and angular velocity. The usage of both acceleration and angular velocity gives richer information than the sole use of acceleration, allowing the enhanced performance particularly in determining the boundary conditions. A numerical simulation on a simply supported beam is presented to demonstrate the proposed FE model updating approach.
This study intended to analyze an influence of the structure elements on the optimal location for one-outrigger system in tall building by using MIDAS-Gen. In this investigation, the analysis parameters were the outrigger position and the stiffness of main structure elements such as shear walls, outrigger systems, exterior columns connected in outrigger system and frames not to be connected in outrigger system. For the objective of finding out the optimal location for one-outrigger system in high-rise building, we studied the lateral displacement in top level of 80 stories building.
The results of this study indicated that the outrigger location and the stiffness of main structure elements such as shear walls, outrigger systems, exterior columns connected in outrigger system and frames not to be connected in outrigger system had an influence on the optimal location of one-outrigger system. In addition, it is showed that the research results can be very useful in obtaining the structure design data for looking for the optimal location of one-outrigger system in high-rise building.
For the safe design of steel-concrete composite structure, usable yield strength of steels are limited in most of design standard. However, this limitation sometimes cause the uneconomical design for some kind of members such as slender columns which was affected by elastic buckling load. For the economical design for slender columns, parametric study of RCFT (Rectangular CFT) with high-strength steel is conducted, especially investigating the limitation of yield strength of high-strength steels. Using ABAQUS, finite element analysis program, the finite element model was constructed and calibrated with experimental study for RCFT with high strength steel which have yield strength up to 680MPa. Investigated design parameters are yield strength of steel, compressive strength of concrete, steel thickness and slenderness ratio. The effect of desgn parameters were compared with design standard, KBC-09. From the parametric study with 54 models and previous test specimens, RCFT can be safely design with higher yield strength of steels than currently limited by KBC for large range of slenderness ratio.
본 연구는 댄스게임에 내재된 유익한 가치를 살펴봄으로써 학습과 재미의 양상을 살펴보고자 하였다. 댄스센트럴2의 분석은 게임행위를 통한 교육적 의미를 고찰하는 데에 댄스게임이 가질 수 있는 교육적 기능에 초점을 두었다. 따라서 댄스게임을 통해 학습효과를 창출할 수 있는 요 소와 몰입을 통해 지속적이고 자발적으로 참여할 수 있는 재미요소로 살펴보았다. 학습요소에 는 신체적, 인지적, 정서적 측면에서 재미요소는 그래픽, 사운드, 동영상, 보상, 목표설정 및 난 이도, 제어로 분석하였다. 댄스센트럴2의 연습ㆍ공연모드를 잘 활용한다면 플레이어의 댄스실력 을 향상시킬 수 있는 요소가 내재되어 있음을 알 수 있었다. 물론 댄스게임은 플레이어의 목표 와 목적에 따라 게임 참여행태와 효과측면에 차이가 발생할 수 있다. 따라서 참여자의 실력과 의지 그리고 댄스게임의 활용이 지속될 때 댄스게임의 학습향상이 이루어질 수 있을 것이다.
본 연구는 산림 내 시설물 지역 산불안전진단 체크리스트 작성의 가중치 설정을 위해 AHP분석을 실시하였다. AHP 연구는 전문가를 대상으로 실시하는 질적의 연구로 대상자 선정이 중요하다. 따라서, 산불에 전문적인 지식을 가지고 있는 산불담당 공무원과 연구직을 대상으로 조사하였다. 또한 신뢰성 검증을 위해 총 30부 중 CI(consistency Index)값이 0.1이하 값들은 제외하고 총 17부를 대상으로 분석을 실시하였다.
조사항목 중에서 산림 내 시설물 지역에 산불피해를 발생시키는 주변요인의 우선순위 도출을 위한 상위 계층으로는 시설물 주변의 환경(지형, 임상, 산림으로부터 이격거리, 시설물이 보유한 진화자원, 기타 요인)을 조사 하였고, 하위 계층은 상위 계층 중 기타요인에 해당하는 항목(시설물에 접근하는 진입로의 개수, 폭, 시설물의 방화선/방화벽 확보여부, 시설물에 투입되는 진화자원 활용을 위한 공간 확보 여부, 주변의 가연물질(낙엽, 화목더미, LPG통 등의 관리상태)을 조사하였다.
분석결과 상의 계층의 가중치는 산림으로부터 이격거리가 0.278, 기타 요인 0.212, 지형 0.175, 시설물이 보유한 진화자원 0.170, 임상 0.164 순으로 나타났고, 하위계층에서는 주변의 가연물질(낙엽, 화목더미, LPG통 등의 관리상태)이 0.284, 시설물에 투입되는 진화자원 활용을 위한 공간 확보 여부 0.278, 시설물의 방화선/방화벽 확보여부 0.210, 시설물에 접근하는 진입로의 폭 0.167, 시설물에 접근하는 진입로의 개수 0.119 순으로 나타났다.
따라서 본 연구에서 도출된 가중치를 이용하여 산림 내 주요시설물지역의 산불피해 위험요소를 판단하여 산불안전진단기법개발의 기초자료를 제공코자 한다.
콘크리트 구조물은 시간의 경과에 따라 노후화되고, 열악한 외부 환경에 노출되어 부재 및 재료 자체의 성능이 저하된다. 콘크리트 구조물의 유지관리 방안으로 긴장력을 도입한 CFRP 긴장재를 콘크리트 내부의 표면매립(Near Surface Mounted, NSM)하여 구조물의 보수 보강을 위한 연구가 진행 중이다. 기존의 표면매립공법에 대한 연구는 긴장력을 매개변수화 하여 보강성능을 비교하는 연구가 대부분이나 표면매립공법의 파괴거동을 예측할 수 있는 3차원 유한요소해석모델에 대한 연구는 부족한 실정이다. 본 연구에서는 CFRP 긴장재와 콘크리트 부재의 계면 특성을 반영한 3차원 유한요소해석을 통해 포스트 텐션 표면매립공법의 휨 거동을 분석하였다. 또한, 포스트 텐션을 적용한 표면매립공법의 보강성능에 대한 정확한 평가를 위하여 부재단위 실험결과와 제안한 해석모델의 파괴거동을 비교분석하여 타당성을 검증하였다.
도시환경은 비슷할 수 있지만 도시를 구성하고 있는 산업단지, 주거단지 등 모든 구조가 다르기 때문에 똑같은 재난·재해 매뉴얼을 적용하다는 것은 효과적인 재난 예방을 담보하기 어려워 위험성이 크다. 따라서 각 도시에 맞는 재난·재해 대응 매뉴얼 개발이 필요하다. 또한 한정된 자원을 효과적으로 활용하기 위하여 위험의 규모와 확률을 계산하고 지역특성을 고려한 위험 요소의 가중치 산정을 통해 집중적인 예방활동을 하는 것이 필요하다. 본 연구는 대전시의 지역별 특성에 맞는 도시 위험요소를 선정하고 우선순위 결정을 위하여 델파이 기법과 AHP분석을 이용하였다. 또한 재난·재해를 사전에 예방하기 위하여 자연재난·재해와 사회재난·재해 요인으로 구분하여 평가지표를 제시하고자 하였다.
델파이 분석결과, 대전시는 산불과 산업사고, 폭염에 대한 대비는 우수한 것으로 나타났지만 풍수해, 가뭄, 낙뢰, 교통, 건물붕괴, 독극물(환경오염), 화재폭발, 감염병 경우 ‘보통(3점)’에서 ‘그렇다(4점)’사이의 인식을 나타냈다. 반면 지진 같은 경우에는 매우 우려되고 있는 것으로 나타났다. AHP 분석결과는 풍수해, 지진에 대한 중요도가 높은 것으로 나타났다. 또한 산불재난에 대한 대비와, 건물붕괴의 중요도가 높게 나타났다.
재난·재해를 예방하기 위하여 많은 노력과 준비가 필요하지만 한정된 자원과 시간 속에서 모든 재난·재해에 비용을 지출한다는 것은 너무 많은 순손실을 가져온다. 분석결과를 기초로 도시별 재난·재해 예방을 위한 안전계획 수립, 재난대응 매뉴얼 등에 반영된다면, 재난 발생시 인구기능 밀집 등으로 인한 연쇄·증폭 효과로 심각한 피해를 보다 효과적인 방법으로 대응할 수 있을 것으로 판단된다.
최근 기후변화로 인하여 도심지역내 돌발홍수가 빈번하게 발생하여 많은 인명 및 재산피해가 발생하고 있다. 특히, 급격한 도시화로 인한 불투수면적의 증가와 녹지면적의 감소 등이 도심지역내 우수 저류 및 지연능력 감소와 첨두 유량의 증가를 발생시켜 도시 돌발홍수의 발생과 피해를 증가시키고 있다. 도심지역내 우수유출에 의해 발생하는 피해를 저감시키기 위한 방법으로 미국 PGDER(Prince George’s County, Maryland Department of Environmental Resources)에 의하여 시행된 LID 기법에 대한 연구 및 시행이 활발히 이루어지고 있다. 본 연구의 대상지는 경남 양산시 내에 위치한 실증단지이며, 실증단지 내 LID 적용시설은 건축물형 LID시설, 도로형 LID시설, 주차장형 LID시설, 산업체형 LID시설, 생태저류형 LID시설로 이루어져 있다. 본 연구는 유역 구분 및 지형자료 분석을 통하여 실증단지에 적합한 매개변수를 산정하여 SWMM 모형을 구축하였으며, 구축된 모형에 LID 기법을 적용한 유출량을 산정하고 분석하여 최종적인 실증단지 통합모형을 구축하였다. 모형은 크게 LID 기술을 적용하지 않은 대조군 유역과 LID 기술을 적용한 실증단지 유역으로 구분하였다. 본 연구는 실증단지와 대조군부지의 비교를 통하여 LID요소기술별 성능을 평가ㆍ분석하고, 설계 강우 기준을 제시하고자한다.
본 논문에서는 브람스의 몇몇 피아노 작품의 창작에 자극을 주고 작품에 반영되어 있는 음악외적 대상으로서의 ‘시적(poetic) 요소’를 검토하였다. 그리고 브람스가 ‘절대음악의 전 형’으로 귀결되는 일련의 음악사회적·미학적 배경을 고찰하였다. 이 과정에서 19세기 후반 의 ‘절대음악 미학의 대표자’로 손꼽히는 한슬릭(Eduard Hanslick)과 브람스(Johannes Brahms)의 관계가 조망되고, 브람스 음악에 대한 한슬릭의 수용에서 드러난 모순점을 비판 적 시각으로 서술하면서 브람스 음악을 ‘절대음악의 전형’으로 자리매김하는 기존 음악사의 평가에 대한 수정을 요구하였다. 아울러 이러한 ‘시적 요소’가 음악적 프로그램으로 간주될 수 있는지에 대한 지속적인 연구 과제를 제기하였다.
본 연구는 2009년 개정 사회과 교육과정 하에서 개발된 2014년 초등 4학년 사회교과서의 다문화와 관련되는 내용을 찾아 분석하는 것을 목적으로 한다. 분석의 틀은 조영달 외(2009)에서 교육과정을 분석하기 위한 틀을 사용하였다. 선행연구인 조영달 외(2009)에 의하면 초등 사회교과에서 다문화적 내용 요소들이 가장 많이 나타난 학년은 3학년 2학기, 4학년, 6학년 2학기이다. 이에 초등 4학년 사회교과에 중점을 두어 2009개정 교과서의 다문화적 내용요소를 2007개정 교과서와 비교하여 분석한다는 것은 조영달 외(2009) 연구의 연장적인 측면에서 의의가 있다고 할 것이다. 나아가 지젝의 이데올로기론을 바탕으로 우리나라가 지향해야 할 다문화사회의 비전과 내용을 고스란히 담고 있는 국정 사회교과서의 내용을 살펴보았다. 분석 결과 2009개정 교과서에는 다문화적 내용요소들이 2007개정 교과서에 비해 다소 증가하였다. 세부적 분석결과는 첫째, 소수자의 권리가 2007개정 교과서보다 훨씬 다양한 방법으로 나타나고 있고 새롭게 다문화 가정과 북한 이탈주민에 대한 개념정의가 이루어졌다. 또한 정체성에 대한 우리 사회의 다문화 판타지가 강하게 나타난 부분으로 볼 수 있겠다. 둘째, 2009개정 교과서에서의 다양성·다원성부분이 2007개정 교과서에 비해 현저히 줄어들었다. 반면, 여성의 차별과 양성평등 관련 부분은 2007개정 교과서에서 6개였던 것이 2009개정 교과서에서는 10개로 늘어나는 것은 물론 페이지량도 6페이지에서 10페이지로 늘어났다. 셋째, 우리 사회에 이로움이 되는 다양성·다원성을 주로 표현하고 있다. 이는 우리 사회의 대타자가 어떤 다문화 사회를 지향하고 있는 지를 암시적으로 나타내는 다문화 판타지로 해석될 수 있을 것이다. 넷째, 주류입장에서의 비주류입장을 고려해보고 그 속에서 차별적인 것을 인식하고 바로 잡아야 한다는 주류 중심주의적 표현이 2007개정 교과서보다 순화되어 나타나고 있다. 그러나 그 속에서 나타나는 ‘냉소적 거리두기’적 표현은 여전히 표현되고 있다.
In terms of both quality of rural lifestyle and cultural awareness, the importance of community facility is being emphasized. Nevertheless, by occasion of graying, population outflow and revenue loss, rural society faces the erosion of community. For these reasons, government is promotion an community space construction project on rural areas which is lack of community facilities. Whereas the projects are just one off thing not include upkeeping, so lots of functional overlapping community facilities are formed in same place. In this study has classified rural community facility remodeling element and designed rural community facility evaluation system of each elements. In order to implement of purpose, it has categorized community remodeling index in rural area by literature analysis and site survey. For setting remodeling rating system, this study analysed preceding research data and conducted a Delphi survey of 30 experts. As a result, this study deducted 29 categories of community remodeling index and 21 categorizes of remodeling rating clause. Taking this result, this study progressed case study on seonheul-ri in Jeju. Implications, limitations and future research directions are presented. It would be groundwork for remodeling system development in rural community facility.