검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 132

        3.
        2025.03 구독 인증기관·개인회원 무료
        국내 태양광 산업은 2000년대 초 크게 성장하였으나 태양광 패널의 수명이 도래함에 따라 폐패널 발생량이 급격히 증 가할 것으로 예상된다. 그러나 태양광 패널의 주요 구성요소인 강화유리는 상용화된 재활용 기술이 부족하여 대부분 파 쇄 후 매립되고 있는 실정이다. 향후 대량 발생하게 될 폐패널의 재활용 기술 개발 필요성이 대두됨에 따라 태양광 폐패 널의 강화유리를 아스팔트 콘크리트 재료로서 재활용할 수 있는 기술을 개발하고자 하였다. 따라서 폐패널 유리 골재를 제조 및 이를 적용한 아스팔트 혼합물의 배합설계를 수행하였으며 일반 아스팔트 혼합물과 폐패널 유리 골재 아스팔트 혼합물의 성능평가 및 경제성을 비교·분석하였다. 그 결과 폐패널 유리 아스팔트 혼합물이 저온균열 저항성을 제외한 모 든 성능 시험에서 우수한 성과를 보였으며, 경제성 또한 일반 아스팔트 혼합물과 비교 시 뛰어난 것으로 나타났다.
        4.
        2025.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        전국 태양광 발전시설의 효율적인 보급을 위해 9개 도 지역별 기상 데이터를 활용한 DEA(Data Envelopment Analysis) 효율성 분석 결과를 도출하고자 한다. 국내 태양광 중심으로 설비보급과 발전 비중이 빠른 속도로 증가 중이며 재생에너지 전력 생산의 효율적 개편을 위해 기후변화에 따른 기상 예측 정보를 활용하고 있다. 본 연구는 신재생 에너지 정책의 시사점이 높았던 2020∼2022년의 기상청 데이터와 과거 30년 평균(1981년 ∼2012년) 데이터를 기준으로 일사량 변화에 의한 발전량 예측 모델을 시뮬레이션했다. 특히 기상 데이터와 실제 발전량 사이 관계를 분석하여 투입 산출 변수와 관련 있는 연구모형의 효율성을 파악하였다. 태양광 발전시설의 안정적인 운영과 관리를 통해 최상의 발전시설 상태를 유지하고, 전력량을 끌어올리기 위해 전문적이고 차별화된 운영관리 (O&M) 서비스 제공이 필요하다.
        7,800원
        5.
        2024.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Floating solar power generation is rapidly emerging as an alternative technology to land-based solar power generation around the world, and there are many advantages to developing and operation floating solar power, but it is a buoyant body that floats solar power modules and structures such as typhoons, tsunami, and wave heights. Research and development is actively underway, and in particular, as damage to buoyancy bodies, which is a vulnerability of floating solar power generation facilities, has been highlighted as a cause of eco-friendly(EVA) buoyancy bodies to improve buoyancy excellence was also achieved in various aspects such as resilience, environmental friendliness, maintenance, and durability.
        4,000원
        6.
        2024.05 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study focuses on analyzing the energy-saving effects of the recirculation aquaculture system using seawater source heat pumps and solar power generation. Based on the thermal load analysis conducted using the transient system simulation tool, the annual energy consumption of the recirculation aquaculture system was analyzed and the energy-saving effects of utilizing the photovoltaic system was evaluated. When analyzing the heat load, the sea areas where the fish farms are located, the type of breeding tank, and the circulation rate of breeding water were taken into consideration. In addition, a method for determining the appropriate capacity for each operation time was examined when applying the energy storage system instead of the existing diesel generator as an emergency power, which is required to maintain the water temperature of breeding water during power outage. The results suggest that, among the four seas considered, Jeju should be estimated to achieve the highest energy-saving performance using the solar power generation, with approximately 45% energy savings.
        4,500원
        8.
        2024.04 구독 인증기관·개인회원 무료
        부유식 해상태양광 설비는 패널 지지를 위한 프레임 구조물, 구조체의 부력 제공을 위한 부유체와 전체 시스템의 거동을 제한하는 계류시설로 구성되어 있다. 계류시설은 구조물의 지지조건으로서의 역 할을 통해 안정적인 발전량 수급에 기여한다. 하지만 해당 시스템은 설치된 해상환경 특성상 계류선의 파단 및 손상 시 직접적인 탐지가 불가능해 유지관리에 어려움이 있다. 따라서 본 연구에서는 패널지 지 프레임 구조체에 가속도 센서 부착을 가정하여, 해당 센서 계측값을 토대로 계류설비에서 발생한 파단 및 손상이 발생한 위치를 추정하는 알고리즘을 개발하였다. 알고리즘은 비지도학습 인공지능의 일종인 오토인코더를 활용하여 가속도 계측값의 재현 과정을 통해 정상상태의 구조 응답을 학습한 모 델이 비정상상태의 계측값을 재현 시 발생한 오차를 통해 손상 발생 여부와 위치를 실시간 탐지하도 록 구성하였다. 정상상태 구조응답을 기반으로 한 모델의 학습을 위해 패널지지 구조체를 10x10 격자 형으로 결합한 다중 결합 시스템에 불규칙파랑을 환경하중으로 적용함을 통해 발생한 6자유도 가속도 데이터를 확보하였다. 계류시설의 손상 발생 시 주된 변화 인자 탐지를 위해 상관성 분석과 민감도 분 석을 실시하여 손상 위치 추정 알고리즘에 적용할 주요 인자를 선별하여 학습 및 추정 성능에 대한 비교 분석을 수행하였다. 구축된 알고리즘의 테스트를 위해 총 5개 종 손상 케이스 데이터셋을 구축하 여 손상 위치 추정 성능을 비교하였다. 본 연구를 통해 계류 시설에 발생한 손상 여부 및 위치를 추정 하여 부유식 해상태양광 설비의 선제적 유지관리에 기여할 수 있을 것으로 기대된다.
        9.
        2024.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The government is implementing a policy to expand eco-friendly energy as a power source. However, the output of new and renewable energy is not constant. It is difficult to stably adjust the power supply to the power demand in the power system. Therefore, the government predicts day-ahead the amount of renewable energy generation to cope with the output volatility caused by the expansion of renewable energy. It is a system that pays a settlement amount if it transitions within a certain error rate the next day. In this paper, Machine Learning was used to study the prediction of power generation within the error rate.
        4,000원
        10.
        2023.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        For the Floating Photovoltaic development project, economic analysis is conducted by predicting the amount of power generation in consideration of climate factors. Among the climate factors, the outside temperature increases the temperature of the module. As a result, the efficiency of the module is reduced. Due to global warming, the outside temperature is rising every year, when estimating the amount of power generation over the next 20 years, a more accurate prediction will be possible only when considering the temperature rise.
        4,000원
        11.
        2023.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES : Safety Evaluation of Wind Loads of Renewable Energy and Photovoltaic Power Structures. METHODS : Structural safety evaluation was conducted on the wind load of 3kW Photovoltaic Power Structures using ABAQUS. Wind speed was reviewed for 36m/s and 60m/s. Effective Mass and Mass Contribution of Photovoltaic Power Structures was utilized up to 90%. 7 steps were set and applied to structural analysis. RESULTS : As a result of the structural analysis, it was confirmed that the long-term blowing load was affected rather than the size of the wind load. Weak areas were identified at the point of the horizontal beam rather than the modules of the Photovoltaic Power Structures. In particular, it was confirmed that stress exceeding the allowable stress was generated at the junction. In order to secure the safety of Photovoltaic Power Structures, it is judged that reinforcement of the branch is necessary. CONCLUSIONS : The safety of Photovoltaic Power Structures structures for wind load is influenced by persistence rather than the size of the wind load. Therefore, in order to prevent this, it is judged that reinforcement of the branch is necessary.
        4,000원
        12.
        2023.11 KCI 등재 구독 인증기관 무료, 개인회원 유료
        최근 전 세계적으로 전례 없는 홍수와 극심한 폭염이 발생하면서 급속한 기후 변화의 심각성에 대한 세계적 인식이 높아졌다. 태양광 발전시설의 사회적 수용성과 안전성을 적극 홍보하는 한편, 국가 차원에서 정책 결정과 사업 운영을 최적화하기 위해 노력하고 있다. 본 연구는 영남·호남권 12개 주요 시·도의 태양광 발전설비 효율을 지역 에너지자원 지원 시스템과 기상자료를 활용한 DEA(Data Envelopment Analysis)를 활용하여 분석하였다. 첫째, 지역 내 지리적 범위의 차이는 발전효율의 성능적 평가의 차이점이 발생하는 것을 알 수 있었다. 둘째, 경제적 측면과 환경적 측면을 모두 고려한 태양광 발전시설에 대한 최적의 공간정보시스템의 중요성을 강조한다. 국내 신재생에너지 발전시설의 입지적 조건 개선으로 거시적 측면의 운영을 질적으로 보완하여 에너지 정책적 지원 필요성을 시사하며, 에너지 투자사업의 경제성 및 타당성을 제시하고자 한다.
        6,900원
        14.
        2023.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Currently, yellow phosphor of Y3Al5O12:Ce3+ (YAG:Ce) fluorescent material is applied to a 450~480nm blue LED light source to implement a white LED device and it has a simple structure, can obtain sufficient luminance, and is economical. However, in this method, in terms of spectrum analysis, it is difficult to mass-produce white LEDs having the same color coordinates due to color separation cause by the wide wavelength gap between blue and yellow band. There is a disadvantage that it is difficult to control optical properties such as color stability and color rendering. In addition, this method does not emit purple light in the range of 380 to 420nm, so it is white without purple color that can not implement the spectrum of the entire visible light spectrum as like sunlight. Because of this, it is difficult to implement a color rendering index(CRI) of 90 or higher, and natural light characteristics such as sunlight can not be expected. For this, need for a method of implementing sunlight with one LED by using a method of combining phosphors with one light source, rather than a method of combining red, blue, and yellow LEDs. Using this method, the characteristics of an artificial sunlight LED device with a spectrum similar to that of sunlight were demonstrated by implementing LED devices of various color temperatures with high color rendering by injecting phosphors into a 405nm deep blue LED light source. In order to find the spectrum closest to sunlight, different combinations of phosphors were repeatedly fabricated and tested. In addition, reliability and mass productivity were verified through temperature and humidity tests and ink penetration tests.
        4,000원
        15.
        2023.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Numerous studies have attempted to predict the energy output of solar-powered vehicles based on different parameters such as road conditions, driver characteristics, and weather. However, since these studies were conducted on stationary vehicles, they are limited in their accuracy when applied to driving vehicles. This study aimed to improve the accuracy of electric power prediction for a solar-powered bus by applying a technique that improves energy efficiency without affecting driving performance. A comparative analysis of power generation and solar irradiance data was conducted for the bus driven on different roads to forecast its power generation, and a high-accuracy power generation prediction equation was derived. A comparison with actual test results revealed that a power generation forecast accuracy of at least 90% was achieved, validating the equation used for forecasting. With this power generation prediction process, it is possible to forecast the amount of energy generated in advance when a solar bus is operated in a specific area.
        4,000원
        18.
        2022.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study analyzes the effects of the number of angles and bends on resistance in a conductor-embroidered stitch circuit for efficient power transfer through a conductor of wearable energy harvesting to study changes in power lost through connection with actual solar panels. In this study, the angle of the conductive stitch circuit was designed in units of 30°, from 30° to 180°, and the resistance was measured using an analog Discovery 2 device. The measured resistance value was analyzed, and in the section of the angle where the resistance value rapidly changes, it was measured again and analyzed in units of 5°. Following this, from the results of the analysis, the angle at which the tension was applied to the stitch converges was analyzed, and the resistance was measured again by varying the number of bends of the stitch at the given angle. The resistance decreases as the angle of the stitch decreases and the number of bends increases, and the conductor embroidery stitch can reduce the loss of power by 1.61 times relative to general embroidery. These results suggest that the stitching of embroidery has a significant effect on the power transfer in the transmission through the conductors of wearable energy harvesting. These results indicate the need for a follow-up study to develop a conductor circuit design technology that compares and analyzes various types of stitches, such as curved stitches, and the number of conductors, so that wearable energy harvesting can be more efficiently produced and stored.
        4,000원
        19.
        2022.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Agrophotovoltaic (APV) system is an integrated system producing crops as well as solar energy. Because crop production underneath Photovoltaic (PV) modules requires delicate management of crops, smart farming equipment such as real-time remote monitoring sensors (e.g., soil moisture sensors) and micro-climate monitoring sensors (e.g., thermometers and irradiance sensors) is installed in the APV system. This study aims at introducing a decision support system (DSS) for smart farming in an APV system. The proposed DSS is devised to provide a mobile application service, satellite image processing, real-time data monitoring, and performance estimation. Particularly, the real-time monitoring data is used as an input of the DSS system for performance estimation of an APV system in terms of production yields of crops and monetary benefit so that a data-driven function is implemented in the proposed system. The proposed DSS is validated with field data collected from an actual APV system at the Jeollanamdo Agricultural Research and Extension Services in South Korea. As a result, farmers and engineers enable to efficiently produce solar energy without causing harmful impact on regular crop production underneath PV modules. In addition, the proposed system will contribute to enhancement of the smart farming technology in the field of agriculture.
        4,000원
        1 2 3 4 5