Industrial disaster caused the deaths of 2,114, construction workers among them was the highest of 621 deaths. In the construction industry, has established a number of safety alternatives to prevent accidents. But until now, the cause of the accident has stopped being superficial analysis, awareness on the root cause of the acciden did not reflect. In this study, we analyze the characteristics and causes in G contractors' safety accidents. And innovation strategy, organization-wide safety management system and detailed tasks to derive essentially was to prevent the occurrence of large construction companies. A lot of business for accident prevention effect was transient and formal, to reflect a management style and organizational culture, and try to prevent construction accidents. we will strive to prevent the disaster from the construction site through the improvement of these.

The recent trend in the war fields on the globe may be characterized by the network-centric warfare, which would, in turn, make the concept of weapon systems be changed. To this end, the concept of system of systems (SoS) has been introduced in literature. An SoS is a collection of multiple systems, each of which is an independent system and can be interoperable with each other. Thus, in defense domain each SoS is a big weapon system as a whole operated in actual environment and each element of it is also an independent smaller weapon system, but they should be interoperable via network among each other. The safety results studied for each elementary system alone may not be fully applicable to the whole SoS. As such, the objective of this paper is to study how to make the SoS safety requirements be distributed down over the interoperable elementary systems. Since handling the interoperability requires a technique of systems architecture, a standard method called the DoD Architectural Framework (DoDAF) has been used here to derive a solution. Using DoDAF, the safety requirements were first analyzed in the operability environment. The results were then studied to be included in an integrated model of both the systems design and safety processes. A further study of present paper would facilitate ensuring safety in the development of SoS weapon systems in practice.

일반교량은 상부구조, 연결부분, 하부구조 및 기초로 구성되어 있고 내진성능은 하부구조와 연결부분의 파괴메카니즘에 의해 결정된다. 그러므로 내진설계는 구조부재의 설계강도, 즉 설계단면을 결정하는 기본설계단계에서 수행되어야 한다. 도로교설계기준 내진설계편은 두 가지 기본설계 방식을 제시하고 있다. 첫째는 기존 설계방식으로 내진설계편이 제시한 응답 수정계수를 적용하는 방식이고 둘째는 새로 도입된 연성도 내진설계 방식으로 설계자가 응답수정계수를 결정하는 방식이다. 이 연구에서는 일반교량을 대상으로 두 설계방식을 같이 적용하는 기본설계를 수행하고 내진성능 확보의 관점에서 요구되는 보완사항을 제시하였다.

Ensure the quality and reliability of the developing product should be considered essential. Reliability process is lacking compared to its importance, especially in the field of domestic medical devices. In this paper is Reliability process formulation ofnear-infrared solid microscope for ophthalmic surgery, based on a variety of existing practices and other product process to ensure product reliability, reliability process was established.Together domestic and international standards were investigated that essential in order to maintain a high level of reliability and quality. In this paper, the following findings were obtained. First, learned about the medical equipment needed to ensure quality and reliability standards. Second, reliability ensure process design and formulation were studied.

국내 심부지질환경조건을 반영한 처분안전성 평가에 필요한 입력자료를 제공하기위해, 그 동안 국내 지하시험시설(KURT)환경조건에서 많은 실험을 수행해 왔다. 안전성평가코드에 사용되는 많은 입력변수 들 중 중요성이 부각되는 입력변수들을 선정하여, 각 변수별로 수집한 자료를 통계처리를 하여 값 분포 특성을 기술하고, 외국자료 값과 비교평가를 통해 값의 타당성을 검토하였다. 다룬 입력변수로서 용기물 성분야에서 용기수명, 초기파손률을, 완충재물성분야에서는 핵종용해도, 완충재의 공극률, 밀도, 확산계 수, 핵종분배계수를, 암반 및 원계영역에서는 수리전도도, 지하수유속, 핵종분배계수, 확산깊이, 암반균 열폭, 주지하수유동통로까지 거리, 핵종이동오염운의 너비 등이다.

MIRIS, Multi-purpose Infra-Red Imaging System, is the main payload of STSAT-3 (Korea Science & Technology Satellite 3), which will be launched in the end of 2012 (the exact date to be determined) by a Russian Dnepr rocket. MIRIS consists of two camera systems, SOC (Space Observation Camera) and EOC (Earth Observation Camera). During a shock test for the flight model stability in the launching environment, some lenses of SOC EQM (Engineering Qualification Model) were broken. In order to resolve the lens failure, analyses for cause were performed with visual inspections for lenses and opto-mechanical parts. After modifications of SOC opto-mechanical parts, the shock test was performed again and passed. In this paper, we introduce the solution for lens safety and report the test results.

본 연구는 딸기 GAP 모델을 개발하기 위한 기초자료를 제공할 목적으로 서부경남에 소재한 딸기 농장 세 곳을 선정하여 딸기의 재배단계에서의 생물학적(위생지표세균, 병원성 미생물, 곰팡이), 화학적(중금속) 및 물리적(이물) 위해요소를 조사하였다. 먼저 작물, 재배환경, 개인위생을 대상으로 생물학적 위해요소를 분석한 결과, 위생지표세균인 일반세균과 대장균군의 경우 재배환경에서 최대 7.3 및 5.6 log CFU/g, 개인위생에서 6.3 및 5.4 log CFU/hand or 100 cm2, 잎에서 5.3 및 4.7 log CFU/leaf으로 검출되었다. 병원성 미생물의 경우 Bacillus cereus가 토양에서 최대 6.1 log CFU/g, Staphylococuus aureus가 작업자 손에서 5.4 log CFU/hand로 검출되어 이들 병원균에 의한 식중독 발생 가능성 또한 있는 것으로 나타났으며, 공중낙하균의 경우는 안전한 수준으로 나타났다. 화학적 위해요소인 중금속 (Cd, Pb, Cu, Cr, Zn, Ni, Hg 및 As)은 모두 국내 허용기준치 이하로 검출되었고, 물리적 위해요소는 유리조각, 캔 등의 일반쓰레기나 경작지 폐기물 등으로 확인되었다.

As of Dec. 31, 2011, the number of nation's escalators accounts for 24,248 units, 5.4% of total elevators in our country, safety accidents take up as many 539 case, 55.2% of total elevators' safety accidents. Escalator safety accidents show high incident ratio of primary safety accidents breaking out by users' careless and abnormal use type, taking up multi-caused accident, which mainly take place from vulnerable age groups such as children under 13, and elders above 65. The Government will have to devote itself for policy and support for the establishment of safety management system fit for current state, the revitalization of preventive education for safety accident, the enhancement of safety awareness to escalators' users in order to secure escalator safety environment on an international level and support domestic industrial development.

If cultural Heritageis located in the downtown, conservation areas was developed or is being developed In most cases Therefore, in this case, the relative height of the building during construction than the regulatory limit is reasonable, is emerging need to be objectified. This study was utilizes GIS analysis techniques for 'View Corridor' and building height standards were determined. First, 'View Corridor' set and building height restrictions for the analysis of urban environmental factors were analyzed in. In particular, the topography and urban planning, and existing buildings, including the distribution of the physical urban environment, with detailed analysis on the major historical and cultural assets with a combination of a review of the impact factor for the formation of the urban landscape recognize the scope has been expanded. Second, the key selection criteria for View point largely focused on cultural Heritageand the surrounding communicative point of view and, consequently, connectivity, and symbolism, accessibility, analysis, factors such as Prospect, setting the standards by applying a detailed assessment of each item the main view point were derived. Third, the derived key View point on the terrain and landscape characteristics simulation analysis carried out by considering together the main axis, and this suggests a reasonable height for the proposed standards.

인도, 베트남, 칠레, 중국, 필리핀, 케냐, 탄자니아, 페루, 인도네시아, 코스타리카, 그리고 라오스 외 총 23개국의 서로 다른 5000종 식물의 에탄올과 메탄올 추출물을 이용해서 뎅기, 뎅기열, 황열병의 주 매개체인 Aedes aegypti 에 대해 살충 활성을 검정 하였다. 유충의 사충률은 처리 후 24시간 후에 확인 하였다. 500ppm에서 사충률 > 90% 이상 되는 식물체는 49 종의 식물체로 확인 되었다. 49종의 식물체 추출물의 처리 농도를 희석 과정을 거쳐서 확인 후 최종적으로 3종의 식물체를 선별 하였다. 3종의 식물체는 인도에서 채집한 Araceae과의 Scindapsus officinalis (Roxb.) Schott, 케냐에서 채집한 Commelinaceae과의 Commelina africana L., 그리고 탄자니아에서 채집한 Fabaceae과의 Millettia oblata Dunn 이다. 이 3종의 식물체를 유기용매 4가지를 이용 하여 분획 과정을 거친 후 살충 활성 검정 후 높은 활성을 보이는 분획물의 LC50 값을 확인하였다. Scindapsus officinalis (Roxb.) Schott 는 클로로포름 분획물 (LC50-13.93), 부탄올 분획물 (LC50-15.65)에서 높은 활성을 보였고, Commelina africana L 는 헥산 분획물(LC50-1.85), 에틸아세테이트 (LC50-5.5)에서 높은 활성을 보였고, Millettia oblata Dunn는 헥산 분획물(LC50-8.77), 에틸아세테이트(LC50-9.73)에서 높은 활성을 보였다. 이 세 가지 식물은 Aedes aegypti 유충 방제를 위한 좋은 원료가 될 것으로 예상한다.