In this study, the deformation of friction stir welding on the aluminum battery housing material(AL6063-T5) applied to the electric vehicle was effectively predicted through experiments and numerical simulations. The temperature data were measured during the friction stir welding experiment, and the numerical simulation was carried out using the experimental temperature data. In the heat transfer analysis, the temperature distribution of the structure over time was calculated using the Reynolds equation. The final friction stir welding deformation was calculated by performing the structural analysis using the calculated temperature distribution data over time. The thermal elasto-plastic analysis was performed according to the friction stir welding process conditions and the welding sequences. Finally, the optimum welding condition was derived that the welding speed is 1000 mm/min and the rotation speed of the tool is 2000 RPM.

The verification and the design improvement of weight-training machines were performed. This research was carried out with computer simulation using the musculoskeletal model of the human body. The main topic of this research is the improvement of an arm-curl machine. Also the improved exercise effects were observed in this paper. The existing exercise which moves the scapula on the axis of the elbow with raised forearm is effective for only Biceps. We suggested the new concept arm-curl machine that also raises the scapula after raising the forearm to be effective for Triceps and adjacent muscles. The exercise effect to the Biceps and Triceps was verified in the partⅠ, that to the non-adjacent muscle such as Lattismus Dorsi was verified in the partⅡ of this study. The analysis with computer simulation using the musculoskeletal model could be helpful to develop improved healthcare machines with reduced price and time.

본 연구는 공공보건자원이 지역사회의 정신건강수준에 영향을 미치는 과정에서 공공보건서비스 이용률이 조절 역할을 하는 지를 확인하고자 수행되었다. 연구대상은 144개의 지역사회이며, 자료는 제6기 지역보건의료계획과 2015년 지역사회 건강조사에서 확보하였다. 연구변수 중 공공보건자원은 공공보건예산, 공공정신보건예산 및 공공정신보건인력으로 구성하였으며, 정신건강수준은 스트레스 인지율, 우울감 경험률 및 자살률로 하였다. 조절효과 분석에 사용된 방법은 위계적 회귀분석이었다. 연구결과는 첫째, 공공보건서비스 이용률은 공공정신보건예산이 우울감 경험률에 영향을 미치는 과정에서 조절변수로 작용하고 있었다. 둘째, 공공정신보건인력이 우울감 경험률에 영향을 미치는 과정에서 공공보건서비스 이용률은 조절효과를 나타냈다. 셋째, 공공정신보건인력이 자살률에 영향을 미치는 과정에서도 공공보건서비스 이용률은 조절효과를 나타냈다. 넷째, 공공보건자원의 정신건강수준에 대한 영향이 공공보건서비스 이용률이 높은 집단과 낮은 집단에 따라 다르게 나타났다. 결론적으로 공공보건자원 강화가 지역사회 정신건강수준의 향상으로 이어지도록 하기 위해 지역사회 정신건강증진 방안에 공공보건서비스 이용률 개선을 위한 내용을 포함시킬 필요가 있을 것이다.

ZnO thin films are of considerable interest because they can be customized by various coating technologies to have high electrical conductivity and high visible light transmittance. Therefore, ZnO thin films can be applied to various optoelectronic device applications such as transparent conducting thin films, solar cells and displays. In this study, ZnO rod and thin films are fabricated using aqueous chemical bath deposition (CBD), which is a low-cost method at low temperatures, and environmentally friendly. To investigate the structural, electrical and optical properties of ZnO for the presence of citrate ion, which can significantly affect crystal form of ZnO, various amounts of the citrate ion are added to the aqueous CBD ZnO reaction bath. As a result, ZnO crystals show a nanorod form without citrate, but a continuous thin film when citrate is above a certain concentration. In addition, as the citrate concentration increases, the electrical conductivity of the ZnO thin films increases, and is almost unchanged above a certain citrate concentration. Cu(In,Ga)Se2 (CIGS) solar cell substrates are used to evaluate whether aqueous CBD ZnO thin films can be applicable to real devices. The performance of aqueous CBD ZnO thin films shows performance similar to that of a sputter-deposited ZnO:Al thin film as top transparent electrodes of CIGS solar cells.

The purpose of this study is to investigate the distribution patterns of displacement and acceleration fields in a nonlinear soil ground based on the interaction of high-speed train, wheel, rail, and ground. For this purpose, a high-speed train in motion was modeled as the actual wheel, and the vertical contact of wheel and rail and the lateral contact, caused by meandering motion, were simulated; this simulation was based on the moving mass analysis. The soil ground part was given the nonlinear behavior of the upper ground part by using the modified the Drucker– Prager model, and the changes in displacement and acceleration were compared with the behavior of the elastic and inelastic grounds. Using this analysis, the displacement and acceleration ranges close to the actual ground behavior were addressed. Additionally, the von-Mises stress and equivalent plastic strain at the ground were examined. Further, the equivalent plastic and total volumetric strains at each failure surface were examined. The variation in stresses, such as vertical stress, transverse pressure, and longitudinal restraint pressure of wheel-rail contact, with the time history was investigated using moving mass. In the case of nonlinear ground model, the displacement difference obtained based on the train travel is not large when compared to that of the elastic ground model, while the acceleration is caused to generate a large decrease.

환경오염과 화석연료의 문제로 인한 2차 에너지 변환 및 저장 장치의 개발이 활발하게 진행되고 있다. 이러한 에너지 변환장치들은 전기화학적 시스템을 기본으로 운영되고 있으며 이온교환막은 각 공정의 성능을 결정짓는 중요한 요소이다. 따라서 에너지 시스템의 효율 증대 및 성능 향상을 위해서는 적합한 물성을 갖는 이온교환막 개발이 필요하다. 이러한 이온교환막은 크게 양이온교환막, 음이온교환막, 바이폴라막으로 분류되고 있으며, 이들 막들은 화학적, 물리적, 형태학적 특성에 따라 다양한 용도을 갖고 있다. 본 총설에서는 이온교환막의 주요한 특징과 함께 이들의 제조 방법에 대해 기술했다. 이어서 이온교환막을 이용하여 최근 개발되고 있는 전기화학 시스템에 기반을 둔 역전기 투석, 레독스 흐름 전지, 수전해 공정에 대해서 소개하고, 각 에너지 공정에서 이온교환막이 갖는 역할과 조건에 대해서 설명하였다.

경주지진과 포항지진으로 수도관 파열과 상수도관 누수가 보고되었다. 따라서 상수도 시설의 지진안전성 확보는 지속적이고 안정적인 물공급을 위하여 중요한 이슈이다. 상수도관은 주로 도로 하부나 일반 성토지반에 매설되어있기 때문에 지진파에 의한 변형뿐만 아니라, 지반의 영구변형, 사면의 불안정성 및 지반 액상화 등에 의한 배관의 굽힘 변형이 발생하게 된다. 이러한 배관의 굽힘 변형이 과도하게 발생 되면 배관 이음부 변위허용량을 초과하여 손상 및 누수로 이어지게 된다. 따라 서, 상수도관 이음부의 허용 변형각이 산출되어야 지진으로 인한 지반의 변형에 대하여 상수도관의 지진안전성을 정확하게 평가할 수 있다. 상수도 시스템은 현장 상황과 설치 여건에 따라 다양한 종류의 상수도관을 이용하고 있다. 그중 주철 상수도관은 오랜 기간 사용되고 개선되어 일반적으로 널리 사용되고 있다. 본 연구에서는 한국주철관공업(주)에서 제작한 EZ-LOK 조인트가 적용된 주철 상수도관에 대하여 4점 굽힘시험을 수행하였으며, 매설된 주철 상수도관의 내진 및 내침하 설계기준인을 참조하여 지진안전성을 평가하였다.

This study was conducted as a part of the research for the “Development of Big Data Analysis Techniques and AI-based Integrated Support System for Energy-Environment Management.” We collected research results on characterization of distribution of fine dust and re-analyzed using meta-analysis techniques to build “big data” with high potential for school environments. The results of prior studies on the characteristics of fine dust concentration distribution in a school environment conducted in Korea were collected and re-analyzed the results using the metaanalysis technique. In this manner, the variables that could be used to derive the independent variables needed to produce the e-coding book prior to the big data collection, were first derived. The possibility of using the data as independent variables was then evaluated. In this study, three variables: “elementary school vs. middle school vs. high school,” “general classroom vs. special classroom,” and “new classroom vs. old classroom” were evaluated for their application as major classification variables with priority. The necessity of being derived as a major classification variable was examined by testing the difference in fine dust concentration distribution in the school environment by each variable case. Results showed that “elementary school vs. middle school vs high school” and “general classroom vs. special classroom” could be used as independent variables, while “new classroom vs. old classroom” was less likely to be used as an independent variable.

SOW-0010의 어도 개보수 전·후 자원량을 분석한 결과 개보수 이후 평균자원량은 약 4.6배 증가한 것으로 나타났다. 경제적 가치는 어도 개보수 전 2014년 약 5.3백만원에서 어도 개보수 후 2015년 약 23.9백만원, 2016년 약 3.0백만원, 2017년 약 10.4백만원, 2018년 약 22.4백만원, 2019년 약 27.1백만원으로 매년 증감패턴이 다르게 나타났다. 2016년을 제외하고 전체적으로 개보수 이후 경제적 가치는 증가한 것으로 나타났다. 이는 다양한 회유성어종의 유입과 담수어류의 국지적 이동이 증가했기 때문으로 판단한다. 자원량 변화에 따른 경제적 가치변동을 지수함수를 적용하여 분석한 결과 모델계수는 0.582였으며, 이에 따른 최대 경제적 가치는 30.4백만원인 것으로 추정되었다. 군집 내 경제성어종의 비율과 점유율이 높을수록 계수값이 증가하고 이에 따라 경제적 가치가 높아질 것으로 예상한다.

The concentrations of volatile organic compounds (VOCs) and odor-inducing substances were measured using selected ion flow tube mass spectrometers (SIFT-MS) and a drone equipped with an air quality monitoring system. SIFT-MS can continuously measure the concentration of VOCs and odor-inducing substances in realtime without any pre-treating steps for the sample. The vehicle with SIFT-MS was used for real-time measurement of VOC concentration at the site boundaries of pollution sources. It is possible to directly analyze VOCs concentration generated at the outlets by capturing air from the pollution sources with a drone. VOCs concentrations of nine spots from Banwol National Industrial Complex were measured by a vehicle equipped with SIFT-MS and were compared with the background concentration measured inside the Metropolitan Air Quality Management Office. In three out of the nine spots, the concentration of toluene, xylene, hydrogen sulfide, and methyl ethyl ketone was shown to be much higher than the background concentration. The VOCs concentrations obtained using drones for high-concentration suspected areas showed similar tendencies as those measured using the vehicle with SIFTMS at the site boundary. We showed that if both the drone and real-time air quality monitoring equipment are used to measure VOCs concentration, it is possible to identify the pollutant sources at the industrial complex quickly and efficiently check sites with high concentrations of VOCs.

본 연구의 목적은 oleic acid로 지방생성이 유도된 HepG2 세포에서 자색옥수수 색소 1호 포엽 및 속대 추출물이 간 세포 내 지방생성에 미치는 영향을 구명하는 것이다. 자색옥수수 색소 1호 포엽 및 속대 추출물에 의한 HepG2 세포 내 지방 축적의 변화를 확인하기 위하여 배양된 세포에 oleic acid로 지방 축적을 유도하고 추출물에 의한 중성지방생성 억제 효과를 측정하였으며 추출물을 처리하지 않은 대조군과 추출물을 처리한 실험군의 지방합성 및 축적에 관련된 유전자와 단백질 발현량을 RT-PCR과 Western blot을 통하여 측정하였다. Oil Red O와 Nile Red 염색을 통하여 추출물의 처리로 HepG2 세포 내 중성지방 축적이 억제된 것을 확인하였다. RT-PCR에 의하여 mRNA 발현량을 측정한 결과, oleic acid에 의하여 지방 생성이 유도된 대조군에 비하여 모든 추출물 처리군의 SREBP-1c와 SREBP-1a 유전자 발현량이 유의적으로 감소되었다. Western blot을 실시하여 p-AMPK, p-SREBP1, PPARα, FAS 단백질의 발현량을 측정한 결과, 간에서 지질대사에 관여하는 주요 인자인 SREBP1 단백질의 발현은 추출물의 처리 농도에 따라 유의하게 감소하였으며 지방산의 생합성 경로에 관여하는 주요 효소인 FAS의 단백질 발현향은 모든 처리 농도에서 현저하게 감소된 것이 확인되었다. 본 연구 결과는 자색옥수수 색소 1호 포엽 및 속대 추출물이 간세포 내에서 중성지방의 축적을 억제시키고 지질 합성에 관련된 유전자 및 단백질의 발현을 억제시킴으로써 간 세포 내 지질 축적을 완화할 수 있는 기능성 소재로의 활용가치가 높다고 판단된다.

Kombucha is a fermented tea manufactured by adding various microorganisms and sugars to brewed herb tea such as green tea and black tea. Its components and functions vary depending on ingredients, inoculated microorganism compositions, and fermentation conditions. Therefore, this study aims to examine which conditions affect kombucha properties and how these features are affected. Types of substrates, specifically plant-based foods, alter profiles of polyphenol, organic acids, carbohydrates, and protein amounts in kombucha. Long fermentation time raises polyphenol contents and high fermentation temperatures increase sourness in kombucha. Microbial composition of SCOBY, which is the symbiotic culture of bacteria and yeast used to inoculate microorganisms, change the kombucha microbiome that contributes to the chemical composition and functions of kombucha. Several studies have discovered that kombucha has health beneficial functions such as antioxidant activity, hepatic protective effects, antimicrobial effects, anti-diabetic effects, anti-inflammatory effects, and cholesterol reducing effects. These findings indicate that kombucha has high potential as a health functional food. However, future studies are needed to further determine the relationship of manufacturing conditions and functional properties of kombucha.

PURPOSES: The noise problem in concrete pavements has an adverse effect to the road user or nearby residents and is generated by the contact between a tire and the pavement surface. Exposed aggregate concrete pavements have been adopted to solve the tire-pavement noise problem in the United States and Europe. However, the efficiency of the coagulation retarder and exposure equipment used for this kind of pavement has not yet been investigated. Therefore, this study aims to evaluate the ability of the coagulation retarder and exposure equipment in producing the optimum exposed aggregate texture to achieve low pavement noise. A method for the exposure time selection has also been introduced here. METHODS: Sodium gluconate retarders were selected for use in this study. The retarder-water ratios of 1:1, 1:2, and 1:3 were investigated. The retarder was sprayed on a fresh concrete surface with rates of 200 g/m2, 300 g/m2, and 400 g/m2. The aggregates were then exposed to the surface using a steel brush and a water jet. The efficiencies for the low-noise texture, workability, and environmental impact produced by the two exposure devices were estimated. The EAN and the MTD were investigated according to the exposure time. RESULTS : The aggregates were exposed after the retarder was sprayed on the fresh concrete surface; the exposure lasted for 18 h to 26 h each time. The retarder-water ratio of 1:2 and the spraying rate of 300 g/m2 produced an optimum surface texture for low noise. Additionally, the steel brush performed more effectively in exposing aggregate to the surface compared to the water jet. The selected exposure time window (ETW) was 28 h to 35 h. CONCLUSIONS : The optimum retarder was the sodium gluconate retarder with a retarder-water ratio of 1:2 and a spraying rate of 300 g/m2. The steel brush showed a good performance in exposing the aggregates and showing the efficiency of the coagulation retarder in the given environment so as to produce the quality control condition. The ETW was influenced by the construction, mixture design, and construction environment; however, the selected ETW in this study was 26 h~35 h.

PURPOSES : In many European countries, the fine-size exposed aggregate concrete pavement (EACP) technique has been adopted for a quiet pavement. However, different noise reduction levels were reported based on the mixture design and texture conditions. This study aims to suggest a quality control condition for achieving low-noise texture and a mixture design procedure for exposed aggregate concrete overlay (EACO), which will provide the optimum mixture of the surface texture that can reduce the tire-pavement noise. METHODS : The tire-pavement noise is highly influenced by the pavement surface texture. The surface texture of the EACP can be quantified by the mean texture depth (MTD) and the exposed aggregate number (EAN). The optimum condition for the low-noise texture of the EACP was investigated herein based on the analysis of the review of the texture conditions and noise measurement in many EACP sites. RESULTS : The MTD and EAN criteria can be derived according to the investigated relationship between noise and texture condition. The optimum mixture design to satisfy these criteria can be achieved by controlling the maximum size of the coarse aggregate and the S/a. CONCLUSIONS: This study aimed to suggest a quality control condition for achieving low-noise texture and an optimum mixture design for EACO. As a result, we found that the early traffic opening of EACO can be achieved by using high early-strength cement.

Deicing agent refers to the substance that melts snow by exothermic or endothermic chemical reaction after spraying on snow. It also has the function of reducing the freezing point to prevent freezing. However, the long-term use of deicing agent can cause some negative problems, such as pot hole, concrete corrosion, vehicle and steel bridge parts corrosion. At present, wet salt spray deicing is a cost-effective deicing method that is being widely used. Typical deicing agents are calcium chloride and sodium chloride. Deicing equipment is placed to similar or higher corrosive environment than coastal or marine environment due to direct contact to chloride in deicing operation. Therefore, the anti-corrosion control is very important for the maintenance of deicing equipment. In this study, corrosion resistance, blistering and repairability of the deicing equipment were tested by using test standard (salt water production and spraying- KS D 9502 , evaluating degree of rusting- ASTM D 610, evaluating degree of blistering- ASTM D 714, pull-off strangth of coatings- ASTM D 4541). And an economical coating system with long-term antirust performance was constructed. The results show that the performance of the coating system has been improved than with the original coating.

본 연구에서 국내 어류 분류군별 체형비 (Fineness Ratios; FR)를 분석한 결과 일부 잉어과와 납자루아과, 꺽지과, 검정우럭과 등의 어류 체형비가 상대적으로 낮았고, 그 외 분류군별 어류의 체형비는 4.5 이상으로 대부분 유영력이 뛰어난 것으로 나타났다. 유영성 어류를 대상으로 체장-체고 비에 따른 서식지 선호를 분석한 결과 크게 3가지 어종타입은 구분되었다. 유영력이 낮은 납자루-붕어형은 체형비는 2.1∼3.3 범위이며, 유선형의 비율을 가지는 피라미-참 갈겨니형은 체형비가 3.7∼5.2 범위였다. 은어-누치형은 체장이 체고의 5배 이상으로 유영력이 뛰어난 형태를 가지고 있었다. 어류 체형비에 따른 서식지 유형을 구분하면 붕어- 납자루형은 흐름이 완만한 소 (Pool habitat)형태의 서식지를 선호하는 어종 우세하였고, 반면 피라미-참갈겨니형, 은어-누치형의 경우 유속이 빠른 여울형서식지 (Riffle habitat) 를 선호하는 어종들로 구성되었다. 조사기간 동안 어도를 이용한 어류의 상대풍부도를 분석한 결과, 대부분의 어종들이 피라미-참갈겨니, 은어-누치형에 속하는 유영성이 높은 어류들로 확인되었다. 어도 내 유속이 0.5∼1.0 m s-1 범위에서 이용 어종의 FRs는 4.5∼5.0 범위로 나타나 대부분 유영성 어종들이 어도를 주로 이용하는 것으로 나타났다.