This study aimed to examine the effect of a mild elevation in serum cholesterol level in a porcine coronary overstretch restenosis model using a balloon angioplasty catheter or drug-eluting coronary stent. Pigs were divided into two groups and were fed a commercial normal diet (CND, n = 4) or a high-fat diet (HFD, n = 4) for 5 weeks. Coronary overstretch injury by balloon angioplasty or stent implantation was induced in the left anterior descending and left circumflex artery after 1 week of feeding. Histopathological analysis was performed at 4 weeks after coronary injury. During the experiment, the total cholesterol level in the HFD group increased by approximately 44.9% (from 65.9 ± 3.21 mg/dL at baseline to 95.5 ± 9.94 mg/dL at 5 weeks). The lumen area in the CND group was reduced in comparison with that in the HFD group after balloon angioplasty. After stent implantation, the injury score showed no significant difference. There were significant differences in the neointimal area (2.7 ± 0.33 mm2 in the CND group vs. 3.3 ± 0.34 mm2 in the HFD group, p<0.05), lumen area (2.6 ± 0.54 mm2 in the CND group vs. 2.0 ± 0.33 mm2 in the HFD group, p<0.05), and percent area stenosis (52.0 ± 7.96% in the CND group vs. 62.4 ± 5.15% in the HFD group, p<0.05). Body weight change was not different between the two groups. Increased serum cholesterol level activated vascular smooth muscle cell proliferation in the porcine coronary overstretch model.

PURPOSES : Almost every design method for airport concrete pavements considers only traffic loading and not environmental loading. This study proposes a mechanistic design method for airport concrete pavements, that considers both environmental and traffic loading simultaneously. METHODS: First, the environmental loading of concrete pavements in Korean airports was quantified. FEAFAA, a finite element analysis program for airport pavements, was used to calculate the maximum tensile stress (MTS) of the slab, caused by both environmental and traffic loadings. The factors that influence the MTS were identified via sensitivity analysis, and an MTS prediction model was developed using the statistical analysis program SPSS. The ratio of MTS to the tensile strength of slab was calculated using the prediction model. The fatigue model under the AC 150/5320-6E and AC 150/5320-6F standards of the FAA was corrected to make it suitable for the predicted stress-strength ratio. RESULTS : The MTS prediction model and corrected fatigue model were used to redesign the slab thickness and joint spacing of airport concrete pavements originally designed using the AC 150/5320-6D standard, which empirically considers traffic loading only. As a result, different slab thicknesses and joint spacings were redesigned with consideration for environmental loading, specifically the weather conditions of airports. . CONCLUSIONS: The slab thickness and joint spacing can be mechanistically designed at the same time, whereas previously, only the slab thickness was designed, and the joint spacing was determined empirically.

Korea Jeju District Court Presiding Judge Mr. Jaegal, Chang, Mr. Judge Chung, Seung-jin, and Judge Mr. Seo, Youngwoo declared Jeju District Court Second Criminal Department The Decision on January 17, 2019. The indictment against the accused is applicable when ‘the procedure for filing an appeal is invalid in violation of legal regulations’, according to Article 327 No. 2 of the Criminal Procedure Act, all charges against the accused should be dismissed. Dong Soo Park (330310-1933019), Unemployed, Residence: Jeju-si Jaesung 1-gil 14 apt#101, Registration base: Jeju-si Ora 3-dong 2613.

PURPOSES : It is well known that low temperature cracking is one of the most serious distresses on asphalt pavement, especially for northern U.S. (including Alaska), Canada and the northern part of south Korea. The risk of thermal cracking can be numerically measured by estimating thermal stress of a given asphalt mixture. This thermal stress can be computed by low temperature creep testing. Currently, in-direct tensile (IDT) mixture creep test mentioned in AASHTO specification is used for measuring low temperature creep properties of a given asphalt mixture. However, IDT requires the use of expensive testing equipment for performing the sophisticated analysis process, however, very few laboratories utilize this equipment. In this paper, a new and simple performance test (SPT) method: bending beam rheometer (BBR) mixture creep testing equipment is introduced, and the estimated experimental results were compared with those of conventional IDT tests. METHODS: Three different asphalt mixtures containing reclaimed asphalt pavement (RAP) and roofing shingles were prepared in the Korea Expressway Corporation (KEC) research laboratory. Using the BBR and IDT, the low temperature creep stiffness data were measured and subsequently computed. Using a simple power-law function, the creep stiffness data were converted into relaxation modulus, and subsequently compared. Finally, thermal stress results were computed from relaxation modulus master curve using Gaussian quadrature approach with condierations of 24 Gauss number. RESULTS: In the case of the conventional asphalt mixture, similar trends were observed when the relaxation modulus and thermal stress results were compared. In the case of RAP and Shingle added mixtures, relatively different computation results were obtained. It can be estimated that different experimental surroundings and specimen sizes affected the results. CONCLUSIONS: It can be said that the BBR mixture creep test can be a more viable approach for measuring low temperature properties of asphalt mixture compared to expensive and complex IDT testing methods. However, more extensive research and analysis are required to further verify the feasibility of the BBR mixture creep test.

Structural and mechanical effects of the dynamical precipitation in two copper-base alloys have been investigated over a wide range of deformation temperatures. Basing upon the information gained during the experiment, also some general conclusion may be formulated. A one concerns the nature of dynamic precipitation(DP). Under this term it is commonly understood decomposition of a supersaturated solid solution during plastic straining. The process may, however, proceed in two different ways. It may be a homogeneous one from the point of view of distribution and morphological aspect of particles or it may lead to substantial difference in shape, size and particles distribution. The effect is controlled by the mode of deformation. Hence it seems to be reasonable to distinguish DP during homogeneous deformation from that which takes place in heterogeneously deformed alloy. In the first case the process can be analyzed solely in terms of particle-dislocation-particle interrelation. Much more complex problem we are facing in heterogeneously deforming alloy. Deformation bands and specific arrangement of dislocations in form of pile-ups at grain boundaries generate additional driving force and additional nucleation sites for precipitation. Along with heterogeneous precipitation, there is a homogeneous precipitation in areas between bands of coarse slip which also deform but at much smaller rate. This form of decomposition is responsible for a specially high hardening rate during high temperature straining and for thermally stable product of the decomposition of alloy.

‘Morning Bell’ 품종은 생육이 왕성하고 엽소 및 잎마름병에 강하며 꽃이 큰 백합 신품종을 육성하기 위하여 2008년 충남 농업기술원 태안백합시험장에서 교배한 OT(Oriental hybrid× Trumpet hybrid)계통의 종간교잡종이다. 모본으로는 복색(백 색+분홍색)의 OT계통 ‘Altari’ 품종을, 부본으로는 분홍색의 Oriental계통 ‘Solaia’ 품종을 화주절단수분법에 의해 교배한 후 2009년부터 2012년까지 기내 종자배양 및 증식 육묘하여 2013년 우수계통(OT13-9)을 1차 선발하였다. 2013년부터 2015년도에 걸쳐 ‘Candy Club’ 품종을 대조구로 하여 보통재배를 통한 특성검정을 실시하였으며, 2014년 화훼연구소에서 개최 한 신품종 평가회에서 기호성이 우수한 개체를 2차 선발하여 ‘Chungnam OT-3’로 명명한 후 농촌진흥청 농작물직무육성 신품종선정위원회 심의를 거쳐 국립종자원에 ‘Morning Bell’로 품종보호 출원하였다.‘Morning Bell’ 품종의 중부지역 자연 개화는 7월 2일로 ‘Candy Club’ 품종과 비슷하였고 초장은 120.8cm이었다. 진분홍색 반점에 복색(크림색+적색)의 화색과 상향개화성이었다. 잎마름병과 진딧물 등의 병충해 방제를 주기적으로 실시하고, 양수분 관리 등 일반적인 재배관리를 통해 고품질 절화 및 구근생산이 가능하다.

‘Golden Bell’ 품종은 생육이 왕성하고 엽소 및 잎마름병에 강하며 꽃이 큰 백합 신품종을 육성하기 위하여 2007년 충남 농업기술원 태안백합시험장에서 교배한 OT(Oriental hybrid× Trumpet hybrid)계통의 종간교잡종이다. 모본으로는 노랑색의 OT계통 ‘Yelloween’ 품종을, 부본으로는 백색의 Oriental계 통 ‘Muscadet’ 품종을 화주절단수분법에 의해 교배한 후 2008년부터 2010년까지 기내 종자배양 및 증식 육묘하여 2011년 우수계통(OT11-2)을 1차 선발하였다. 2012년부터 2013년도에 걸쳐 ‘Yelloween’ 품종을 대조구로 하여 보통재배를 통한 특 성검정을 실시하였으며, 2012년 화훼연구소에서 개최한 신품종 평가회에서 기호성이 우수한 개체를 2차 선발하여 ‘Chungnam OT-4’로 명명한 후 농촌진흥청 농작물직무육성 신품종선정위 원회 심의를 거쳐 국립종자원에 ‘Golden Bell’로 품종보호 출원하였다.‘Golden Bell’ 품종의 중부지역 자연개화는 6월 16일 로 ‘Yelloween’ 품종과 비슷하였고 초장은 136.4cm이었다. 반점이 없는 노랑색의 화색과 상향개화성을 나타내었다. 재배에 있어서는 잎마름병과 진딧물 등의 병충해 방제를 주기적으로 실시하고, 양수분 관리 등 일반적인 재배관리를 통해 고품질 절화 및 구근생산이 가능하다.

Chamaecyparis obtusa is one of the economical conifers planted in Korea due to its good quality timber and wood characteristics. Individuals of C. obtusa containing high terpenes (HT) and low terpenes (LT) were selected for by colorimetric method. The HT of C. obtusa was delayed in wilting against various abiotic stresses compared to the LT plants. The HT group exposed to UV did not significant influence the chlorophyll content, and the chlorophyll value was higher in the HT group than the LT group. Also, chilling treatment (5℃) did not significant influence on the chlorophyll content. However treatment at -4℃ showed relatively low chlorophyll content in the LT group than the HT group. Plants exposure to high temperature was not a difference between the HT and the LT group. However, treatment at 38℃ influenced the chlorophyll content that was increased exposure time-dependently. In salt treatments, chlorophyll in the HT group was lower at high concentrations (300 and 500 mM) of NaCl. However, chlorophyll content increased to slightly in treatment time-dependently, which is 6.7% to 40%. H2O2 treatment has been a negative effect on the chlorophyll content in the HT group. All concentration of H2O2 decreased the chlorophyll content of 5% to 35%. Plants containing high terpenoids were resisted against some abiotic stress such as salt and H2O2. Our results implied that terpenoids could cause various abiotic stress resistance. These results could be utilized for efficient management and biomass production during forest silvicultures.

In order to investigate novel insect growth regulators (IGRs) from actinomycetes, 363 isolates of actinomycetes were tested for their IGR activities. Among them, Streptomyces sp. AN120537 showed the highest juvenile hormone antagonist (JHAN) activity and significant insecticidal activities against larvae of Aedes albopictus and Plutella xylostella. In addition, the dead larvae showed morphological deformities such as contraction of body segments or pigmentation of all body parts. Through liquid chromatography and bioassay-guided fractionation, 7 IGR compounds were identified from the crude hexane extract of AN120537. These results suggested that Streptomyces sp. AN120537 could be useful resources for development of eco-friendly insecticidal agents.

고온기 화색발현이 우수하고 연중생산이 가능한 수출용 스프레이국화 신품종을 육성하기 위하여 충남농업기술원 화훼 연구소에서 2010년 분홍색의 모본 ‘Borami’를 방임수분하였다. 2011년에 종자를 파종하였고, 이중 화형과 화색이 우수한 개체를 선발하여 ‘SP11-148-01’로 계통명을 부여하였다. 2011년부터 2013년까지 주년 생산성을 위해 전조, 자연, 차광재배로 특성을 각각 검정하였고, 생육 및 개화특성은 화형과 화색이 비슷한 자주색 스프레이국화인 ‘Kingfisher’를 대조품종으로 조사하였으며, 2013년 ‘Yes Ruby’로 품종등록 출원하였다. ‘Yes Ruby’는 자주색의 설상화와 연녹색의 통상화로 가을 작형 개화기는 10월 24일로, ‘Kingfisher’의 10월 29일에 비해 빨랐다. ‘Yes Ruby’의 초장과 줄기굵기는 각각 94.9cm와 7.7mm로 ‘Kingfisher’의 89.2cm와 6.4mm보다 컸다. ‘Yes Ruby’의 꽃 직경은 6.2cm로 ‘Kingfisher’의 5.0cm보다 컸으며, 꽃잎수도 ‘Yes Ruby’가 25.7개로 ‘Kingfisher’의 23.3개보다 많았다. 착화수는 두 품종 모두 비슷하였으며, 흰녹병 저항성은 ‘Yes Ruby’가 2단계, ‘Kingfisher’는 3단계의 감염 정도를 나타내어 흰녹병에 대한 저항성이 높은 것으로 나타났다. 재배상 유의사항은 ‘Yes Ruby’는 겨울철 균일한 개화가 이뤄지지 않아 겨울철 야간온도를 18℃ 이상으로 관리해줌으로써 균일개화를 유도할 수 있다. 또한 생장억제제인 Daminozide을 처리함으로써 설상화수를 늘려 볼륨감 높은 꽃봉오리를 형성할 수 있어 고온기에도 화색발현이 우수하고 연중생산이 가능하여 안정적 수출을 통한 농가소득 증대에 기여할 수 있을 것으로 기대된다.