Since korea must get 5.2% reduction of green gas emission and insecurity of economic impact is on the increase due to unstable oil market, the demands of energy saving techniques are increasing. In this paper, we investigate necessity of development of enormous energy used cleanroom energy saving techniques furthermore we also investigate the adoption of dependability management system to develop the energy saving cleanroom development process.

Recently, product-reliability and process-reliability in product development processes has been regarded as an important issue in many manufacturers. TRIZ which is theory for inventive solving is required to obtain reliability of each process. To solve the technological problems, TRIZ provides problems can be occurred in product development processes as a contradiction matrix based on 40 creative invention principles with alternatives for physical and technological contradiction. This paper suggests the method for inventive solving to ensure the reliability assurance of product development processes based on TRIZ.

It is hot issue to get the competitiveness of product through reliability-growth as well as availability and safety in almost high-technology industry including military, chemistry, nuclear, telecommunication, transportation service and so on. In advanced countries, worldwide leading companies have tried to improve and develop high-reliability product as well as reliability management system(IEC60300). We investigate reliability certification systems for product and management system. Additionally, we study the feasibility on the adoption of dependability management system(IEC60300) by empirical survey on companies with product-reliability certification(R-mark) in Korea.

It is an important and urgent issue to improve process capability in quality control. Process capability refers to the uniformity of the process. The variability in the process is a measure of the uniformity of output. A simple, quantitative way to express process capability, the degree of variability from target in specification is defined by process capability index(PCI). Almost process capability indices are defined under normal distribution. However, these indices can not be applied to the process of non-normal distribution including reliability. We investigate current research on the process of non-normal distribution, and advanced method and technology for developing more reliable and efficient PCI. Finally we suggest the perspective for future study.

Nowadays worldwide leading companies try to establish more efficient and comprehensive management system for getting high quality, reliability and safety. In this paper, we investigate standards for quality management, dependability management and risk management. We also suggest an integrated and comprehensive system of quality(ISO/TS16949), dependability (IEC60300)and risk(JIS Q2001).

매개충(솔수염하늘소)에 의해 소나무재선충이 감염된 소나무는 감염 당해연도(8~12월)에 일부가 고사하고, 다음 해(1~9월)에 나머지가 고사한다고 알려져 있다. 기존의 방제는 당해연도에 고사된 감염목(피해목)만 방제하고, 피해목 주변의 나머지 감염목은 방치하여, 다음해에 이들 감염목에서 피해가 발생함으로서 피해가 근절되지 않았다. 모두베기방제는 이러한 문제점을 해결하기 위해, 피해목 주변의 피해증상이 나타나지 않은 소나무도 잠재적 감염목으로 간주하여, 한꺼번에 방제하는 것을 의미한다. 벌채의 범위는 매개충 한 마리가 감염시키는 범위 또는 약간 상회하는 규모로서 피해목 또는 피해범위 주변 10-20m(반경)이며, 그 시기는 소나무재선충과 매개충이 고사목에 서식하는 11월부터 4월 사이에 실시하였다. 2005년부터 2007년까지 피해선단지 14개 지역(시군)에서 모두베기방제를 사용하였다. 이들 지역의 방제효과를 평가하기 위하여, 기존 피해목 방제를 실시하였던 지역 중 14개소를 선별하여 모두베기방제 지역과 방제효과를 비교하였다. 방제효과는 방제 전 피해목 본수와 방제 후 피해본 본수의 비율(%)로 계산하였다. 모두베기방제를 한 14개 지역 중 1년 후에 피해가 나타나지 않은 곳은 11개 지역이었으나, 피해목 방제를 한 14개 지역 중에서는 3개 지역에서만 피해가 나타나지 않았다. 방제 첫해의 모두베기방제 지역의 방제효과는 피해목 방제 지역에 비해 45배 가량 높았으며, 다음해에는 86배나 높았다. 피해규모별로 비교했을 때, 소규모 피해지역(피해목 50본 이하)는 무한배, 대규모 피해지역(50본 이상)은 25배가량 높았다. 따라서 모두베기방제법이 잠재적인 소나무재선충병 감염목을 제거함으로써 피해확산 저지에 매우 효과적인 것으로 판단된다.

In order to find phenological change of butterflies due to global warming, we analyzed weekly monitoring data of butterfly at Gwangneung forest in 1958 and 2004. It was tested whether the timing of first flight and mean flight of butterflies in 2004 became earlier due to global warming compared with those in 1958 and whether the duration of flight period became longer. No significant difference was found in timing of first flight and in duration of flight period between 1958 and 2004. Furthermore, species showing delayed timing of mean flight was more abundant than species showing earlier timing of mean flight. Hence, the results do not confirm the predicted changes of phenology due to global warming. We discussed reasons on the non-apparent phenological changes despite the increase of temperature, and the problems and solutions in butterfly study on Korean butterfly fauna in utilization of butterflies as indicator for global warming.

기존의 하중-기반 방법을 대체할 방법중에 성능-기반 방법이 내진설계 및 내진성능평가의 기법으로서 널리 인식되고 있는 실정이다. 탄성응답스펙트럼을 사용하는 역량스펙트럼방법은 비선형 시스템을 등가의 선형시스템으로 치환하여 주어진 지진 하중에 대한 구조물의 최대 비선형 거동을 예측한다. 본 연구의 목적은 철근콘크리트 벽체구조물에 대하여 4개의 등가단자유도방법과 5개의 등가감쇠방법을 사용하여 역량스펙트럼방법의 정확성을 평가하는 것이다. 역량스펙트럼방법의 정확성을 평가하기 위하여 벽체구조물에 대한 진동대 실험결과와 비교하였다. 또한 이선형 곡선변환방법(등가에너지 근사화방법, 유효강성 사화 방법)에 의한 이선형 역량곡선들의 역량스펙트럼 해석에 대한 영향도 비교하였다.

본 연구는 정액의 보존 기간 동안 정액의 질적 변화를 알아보고자 시행하였다. 돼지 정액을 Beltsville Thawing Solution (BTS)에 희석한 후 17'C 에서 5일 동안 보존하였다. 보존 기간 동안 정자의 운동성(%)과 linearity는 3일째부터 유의하게 감소하였으나, 다른 운동 역학 변수에서는 유의적 변화를 나타내지 않았다. 또한, 5일 동안 정액을 보존할 경우 첨체의 온전성에도 변화가 없었다. 그러나 제 4일째부터 첨체 변화가 야기된 정자는 유의적으로 증가하였으나, 수정능 획득이 일어난 정자는 유의적으로 감소하였다. 정액의 보존 기간 동안 첨체의 온전성의 유의적 변화가 없었다. 즉, 보존 기간 3일동안 정자의 질적 운동성 및 첨체 온전성에는 유의적인 변화가 없었으므로 상업용 돼지 액상정액은 17'C 에서 적어도 3일간 수정능력을 만족스럽게 유지함을 보여준다.

Corporations are faced with the key strategic task of adopting a comprehensive management system of a new paradigm in order to enhance their products' quality, safety, and reliability, as well as to minimize the cost of quality. The purpose of this paper is to present a methodology that can be used by corporations to ensure a product's reliability, safety, and maintainability, with minimal costs, by measuring dependability levels and conducting DEA analysis. The methodology will be a way for corporations to adopt an optimal dependability management system based on a quality management system of ISO 9001:2000 standards.

This paper focuses on the in-house reliability assurance plan for the bulk materials of each company. The reliability assurance needs in essence a long time and high cost for testing the materials. In order to reduce the time and cost, accelerated life test is adopted. The bulk sampling technique was used for acceptance. Design parameters might be total sample size(segments and increments}, stress level and so on. We focus on deciding the sample size by minimizing the asymptotic variance of test statistics as well as satisfying the consumer's risk. In bulk sampling, we also induce the sample size by adapting the normal life time distribution model when the variable of the lognormal life time distribution is transformed and adapted to the model. In addition, the sample size for both the segments and increments can be induced by minimizing the asymptotic variance of test statistics of the segments and increments with consumer's risk met. We can assure the reliability of the mean life and B100p life time of the bulk materials by using the calculated minimum sample size.

  This paper attempts to identify empirically whether the certification of Quality Management System affects positively to firm performance using the sample sets of 200 SMEs in Korea who have adopted ISO 9000 majoring in the domestic markets as well as th

Corporations are faced with the key strategic task of adopting a comprehensive management system of a new paradigm in order to enhance their products' quality, safety, and reliability, as well as to minimize the cost of quality. The purpose of this paper is to present a methodology that can be used by corporations to ensure a product's reliability, safety, and maintainability, with minimal costs, by measuring dependability levels and conducting DEA analysis. The methodology will be a way for corporations to adopt an optimal dependability management system based on a quality management system of ISO 9001:2000 standards.

It is an hot issue to reduce vibration for improving quality, reliability and safety in railway vehicles including magnetic levitation, monorail way, surface car etc. This paper aims at literature survey in rolling stocks vibration standards Initially, it has been evaluated by researching and analysing of foreign standards to judge wheather or not the standards being applied in domestic are reansonable and scientific. After that we are proposing the standards of vibration after comparing and analysing the ones in domestic and foreign.

In mold structure machining, tool interference is a phenomenon which results from a collision between a blade of tool and a workpiece. Also tool collision is a phenomenon which results from a collision of holder with the object to be machined. These phenomena not only cause damages to mold and tool but also increase machining time and cost. To detect a collision of a tool to mold structure, first of all, the mold structure and a tool must be defined with famous geometric models such CSG, B-rep, and Voxel. A tool is defined as a combination of the blade, the shank, and the holder. This thesis reviews various collision detection algorithms using z-map and computer 3D graphic collision detection algorithms for the tool in machining a mold structure.