검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 8

        2.
        2006.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this research we tried to make nano-sized TiNx by using planetary milling, and we made the composites double layered of titanium and nano-sized TiNx by using spark plasma sintering apparatus after mixing with the different ratio of pure titanium powder, and they were heat treated at for 30 minutes. The crystal structures of nano-sized TiNx powders and the composites were analyzed by X-ray diffraction (XRD). The microstructures of the powders were analyzed by using scanning electron microscopy (FESEM) and the 40-50 nm size of nano-sized TiNx particle on the surface of agglomerated particles was investigated. With increasing the ratio of nano-sized TiNx of the composites, the microvickers hardness of the composites was increased.
        4,000원
        4.
        2000.09 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        본 논문에서는 Ti-48.5at%Al-0.96at%Mo 조성을 갖는 γ-TiAl 합금은 항온 단조 및 후속 조직제어 열처리 시 발달하는 집합조직의 변화에 관해 연구하였다. 특히, 동적 재결정 후 조직제어 열처리 온도와 시간의 증가에 따라 발생하는 lamellar volume fraction 과 집합조직 변화에 주목하여 관찰하였다. 동적 재결정 후 집합조직은 ND⊥(302) 선분과, TD⊥(100) 및 이에 비해 상대적으로 다소 약한(111) 성분들이 발달하였으며, 열처리 온도와 시간이 증가함에 따라 lameller volume fraction 은 증가했고 동일한 성분의 집합조직도 점차 강하게 발달함을 알 수 있었다. 하지만 상온인장시험 결과는 lameller volume fraction이 증가할수록 낮은 상온 연신을 보였는데, 이는 준 층상조직을 갖는 γ-TiAl합금의 상온인장특성이 집합조직의 영향보다는 lameller volume fractio과 같은 미세조직 특성에 더욱 강하게 영향을 받기 때문인 것으로 판단된다.
        4,000원
        5.
        1999.03 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        본 연구는 냉간가공과 열처리를 통해 Cu-26.65Zn-4.05Al-0.31Ti(wt%) 형상기억합금의 결정립을 미세화하기 위한 목적으로 수행하였다. 냉간가공을 위하여는 α-상이 가능한 많이 존재하는 (α+β)-조직을 가져야 하는데, 이는 550℃에서 열처리함으로써 얻었고, 최종두께 1mm로 냉간압연하였다. 총 압연율은 70%와 90%이었다. 냉간압연한 판재를 800℃에서 가열 후 급랭함으로써 형상기억특성을 갖는 상으로 변태시켰으며, 이 대 결정립크기를 측정한 결과, 열간압연한 경우보다 냉간압연과 열처리를 한 경우의 결정립이 월등히 작아졌음을 보여주었다. 냉간압연과 열처리를 한 경우에는 냉간압연 변형율이 큰 경우가 결정립이 더 작아지는 경향을 보였다. 또한 결정립크기가 작아짐에 따라 변태온도가 저하되었으며 오스테나이트상이 더 안정하게 되었음을 확인할 수 있었다. In this study, cold-rolling and appropriate annealing was adopted for the grain refining of Cu-26.65Zn-4. 05Al-0.31Ti(wt%) shape memory alloy. For the cold deformation of this alloy the ducti1e α-phase must be contained. After heat treatment at 550℃ the (α+β)-dual phase with 40vol.% α-phase was obtained which could be rolled at room temperature. This alloy was cold rolled into a final thickness of 1.0mm with total reduction degrees of 70% and 90%. The rolled sheets were betanized at 800℃ for various times, then quenched into ice water. The grain size of co]d rolled samples were 60∼80 ㎛ which is much smaller comparing with the hot-rolled samples. And the 90% rolled sample showed smaller grain size than the case of the 70% rolled one. The small grain size had influence on the phase transformation temperatures and stabilization of the austenitic phases.
        4,000원
        6.
        2010.12 KCI 등재 서비스 종료(열람 제한)
        The purpose of the study was to analyze the persistence of HCH in atmosphere, soil, sediment and waterof the western and southern regions of Korea. The samples from the western region were collected from Anmyeon Island, and the samples from the southern region were collected from Kimhae and Busan. The concentration of HCH isomers in atmosphere showed the pattern of α-HCH>γ-HCH>ß-HCH. The regions with high HCH concentration in the atmosphere are the regions that have been highly exposed to HCH used in the past, and the areas that have been influenced by the long range transport. The HCH that persists in the soil, water and sediment evaporates into the atmosphere, showing the characteristics of Air-Surface exchange. When the regional concentration distributions arecompared, the concentration of HCH was higher in the atmosphere of a plain and the cities near the plain, than the urban areas. In this study, the ratio of α/γ-HCH was used as an indicator for estimating the source of Technical HCH and Lindane. According to the result, the contribution of Lindane was high in Kimhae plain and Kimhae urban areas. However, in Busan, the contribution of Technical HCH was higher than Lindane. In case of Anmyeon Island, the western region of Korea had high contribution from Tehcnical HCH. In soil and sediment, ß-HCH was dominant. In water, γ-HCH was dominant among other isomers. Such results are due to γ-HCH inLindane. Furthermore, the source of γ-HCH in urban areas is assumed to be the use of medicine, medical supplies and other living supplies. Based on the results of this study, the management of HCH, a newly list up emerging POPs, should be strengthened by further research on sources, fate, persistency, accumulation and exposures and etc. to the risk assessments.
        7.
        2010.04 KCI 등재 서비스 종료(열람 제한)
        This study aims to monitor the variation of concentration of PCDD/DFs between the gaseous phase-particulate phases in the ambient air of urban area in Korea. This monitoring is evaluated by using the Junge-Pankow model and the Koa absorption model with the application of the Octanol-air partition coefficient. In this study, the ambient air samples were analyzed according to each congener group of the PCDD/DFs by HRGC/HRMS, which have been investigated for the past 5 years. In the results, the annual variation in the concentration level of ∑PCDD/DFs in TSP was increased from 1588 fg/㎥ in 1998 to 5123 fg/㎥ in 2002, and from 31 fg I-TEQ/㎥ to 94 fg I-TEQ/㎥ in the ∑I-TEQ. In the case of PUF of gaseous phase sample, their variation was increased from 1615 fg/㎥ in 1998 to 2237 fg/㎥ in 2002, and in the ∑I-TEQ from 12 fg I-TEQ/㎥ to 17 fg I-TEQ/㎥. The relative coefficient between the gas phase concentration of PCDD/DFs and the temperature was a value of 0.744; the contributive rate of the temperature to the gaseous phase concentration was 0.554. According to the results, the pattern of the coefficient of distribution based on log PL0 is similar to the ambient air of the urban areas.
        8.
        1991.10 KCI 등재 서비스 종료(열람 제한)
        유지작물의 안전 생산과 품질향상을 위해 지금까지 유지작물에 발생되는 주요 기상재해에 대한 국내외 문헌을 종합 고찰하였다 유지작물에 발생되는 주요 기상재해는 타작물에서와 같이 냉해나 한해와 같은 온도에 의한 장해, 습해나 도복과 같은 풍수해, 그리고 기타재해 등 각종 재해가 발생되고 있는 것으로 보고되있다. 그러나 유지작물은 국내외를 막론하고 주요작물에 비해 비중이 낮고 재배면적도 적어 비중이 낮게 취급된 관계로 각종 재해에 대한 정확한 피해정도나 재해경감 대책이 밝혀지지 많은 부분이 많은 것으로 고찰되었다. 지금까지 조사 보고된 결과들 중에서는 참깨와 땅콩에 대한 결과들이 많고 그 중에서도 침관수해, 한충해, 도복피해 등 풍수해에 대한 연구결과가 많으며 이 같은 재해들은 피해정도도 매우 큰 것으로 보고되어 심한 경우는 90%이상의 수량감소를 초래하는 것으로 보고하였다. 이와 같은 재해에 대한 피서를 최소화하기 위해서는 우선 품종개량 면에서 각종 재해에 대한 내성을 가진 품종이 개발되어야 할 것이며, 재배기술적인 측면에서도 재해를 분산시킬 수 있는 방법이나 비닐멀칭재배법 등과 같이 기상재해의 사전예방 기술도 적용되어야 할 것으로 고찰되었다. 그러나 최근의 농산물유입 개방화에 따른 다품목 소량재배 추세와 다양한 식품의 안정적 생산공급 측면에서 점차 비중이 높아가고 있는 유서 작물의 안전생산과 품질향상을 위해서는 품종개량과 재배기술 면에서 보다 적극적인 기상재해 경감대책 연구와 노력이 필요한 것으로 전망되었다.