국내 유입 가능성이 높은 검역 관리해충인 Spodoptera eridania 및 S. ornithogalli는 전 세계적으로 토마토, 콩 등 여러 종의 작물을 가해하는 광식성 해충이다. 이에 따라 국내 유입 시 해당 작물에 높은 경제적 피해를 입힐 가능성 이 있으므로 신속 정확한 진단이 필요한 실정이다. 따라서 본 연구에서는 상기 두 종을 대상으로 현장 활용이 가능한 LAMP 진단법 개발을 수행하였다. 표적종 두 종 및 비표적종 11종(국내 발생 Spodoptera 종 및 동일 기주 가해종 등)의 전장유전체 정보를 확보한 후 비교 분석을 통해 각 표적종 별 특이적 영역을 확보한 후 해당 영역을 대상으로 LAMP 프라이머를 제작하였다. DNA 농도 10 ng/μL, 반응시간 40분을 기준으로 LAMP 진단을 수행한 결과, Spodoptera eridania는 5개의 LAMP 진단 마커를 개발하였고, S. ornithogalli는 3개의 LAMP 진단 마커를 개발하였다.

Bombyx mandarina (Lepidoptera: Bombycidae), the presumed ancestor of B. mori, has long been a subject of study to illustrate the geographic relationships in connection with origin of B. mori. We report 97 mitochondrial genome (mitogenome) sequences of B. mandarina collected from Korea and Japan. Phylogenetic and population genetic analyses showed that all individuals of B. mandarina collected in Korean localities formed a strong group together with all individuals originated from northern China (mainly north of the Qinling-Huaihe line) and some of southern China. This group was placed as the sister group to B. mori strians suggesting that this group had been served as an immediate progenitor for B. mori.

CANDU Spent Fuel (CSF) dry storage system, SILO, has been operated from 1992 at Wolsung under 50 year operating license. As of 2023, this system has been operated for over 30 years and its licensed remaining operation time is less than 20 years. When it faces the final stage of operation, it has only two options; moving to a centralized away-from-reactor storage or extending its license atreactor. These two options have an inevitable common duty of confirming the CSF integrity by a “demonstration test”. Since the degradation of CSF and structural materials in the SILO are critically dependent on temperature, two important goals of the ‘DEMO test’ were set as follows. 1. Design of ‘DEMO SILO’: Development of internal monitoring technology by transforming SILO design. 2. Accurate measurement and evaluation of the three-dimensional temperature distribution in the ‘DEMO SILO’ Based on operating real commercial SILO dimension, a conceptual “DEMO SILO” design has been developed from 2022. Because, unlike with commercial Silo, ‘Demo Silo’ must be disassembled and assembled, and have penetration holes. Safety evaluation technologies like structural, thermal and radiation protection analysis also have been developed with design work. ‘Demo SILO’ should evaluate an accurate 3D temperature distribution with minimal number of thermocouples and penetration holes to avoid disruption of internal flow and temperature distribution. For this reason, a ‘Best Estimate Thermal-Hydraulics evaluation system for SILO’ is under development and it will be essential for ensuring temperature prediction accuracy. Construction of a full-scale test apparatus to validate this technology will begin in 2024. In order to supply power to many heaters and monitor temperature gradient inside of this apparatus, it has modular design concept by dividing its whole body to axial 9 sub-bodies which looks like a donut containing a basket at center position.

In this research, KPS manufactured Full System Decontamination (FSD) equipment, which is consisted of Oxidizing Agent Manufacturing System (OAMS), Chemical Injection System (CIS), RadWaste Treatment System (RWTS), Chemical Waste Decomposition & Treatment System (CWDS) and conducted demonstration test to prepare Decontamination and Decommissioning (D&D) project of Kori nuclear power plant in Korea. Each equipment of FSD was modularized due to the limited size of equipment hatch of Kori nuclear power plant. To simulate the expected circumstances in nuclear power plant such as usage of heater or position of each equipment, additional equipment was used. The chemical concentration and flow rate of process water for FSD were used as mentioned in the previous study by KHNP CRI. FSD was conducted for three cycles and each cycle was consisted of oxidation, reduction, chemical decomposition and purification. Oxidation and reduction process were conducted at 90°C. Chemical decomposition and purification process were conducted at 40°C due to the damage of UV lamp and IX by the heat. Total volume of process water for FSD demonstration test was 2.5 m2. KPS conducted decontamination performance review by calculating thickness reduction and weight loss of installed specimen. Operational review was conducted as if FSD test was conducted in the field based on the result of demonstration test. One of the most prioritized features is the workers’ safety. Also, the appropriate position of equipment needs to be considered to meet the required specification of component.

The slaughter of livestock is inevitably required to obtain meat products from livestock. Since slaughter means pain and death for animals, reducing the pain and distress of animals during slaughter is very important from a perspective of animal welfare based on the principle of respect for life. Generally, two stunning methods, CO2 stunning and electrical stunning, are used for slaughter. When the carotid arteries of the lungs are cut off for bleeding, the bronchial tubes are also severed. To determine the degree of blood inflow into the lungs through the severed bronchial tubes, the prevalence rates of pulmonary diseases and pulmonary congestion in slaughtered pigs were analyzed. In this study, the prevalence of pneumonia was 24.9% in Slaughterhouse A using the gas method, but it was decreased by about 10% to 15.7% and 12.6%, respectively, in Slaughterhouses B and C using the electric method. On the other hand, the prevalence of pulmonary congestion in Slaughterhouses A, B, and C was 4.24%, 14.10% and 16.40%, respectively. In other words, the prevalence of pulmonary congestion was higher by about 10% in the groups of pigs slaughtered by the electric method (Slaughterhouses B and C) than in the group of pigs slaughtered by the gas method (Slaughterhouse A). These results indicate that blood inflow into the pulmonary alveoli led to a diagnosis of pulmonary congestion instead of pneumonia in some pigs with pneumonia. In short, it was found that about 10% of pigs stunned by the electric method were not in a state of complete unconsciousness but in a partially conscious state during slaughter. It is suggested that slaughterhouses should be equipped with gas stunning equipment instead of applying the electric method due to lower costs.

우리나라 정원의 식물 이용 현황을 알아보고자 전국 36개 정원을 대상으로 정원식물을 조사하였다. 정원은 6가지 유형 으로 구분하였다. 그 결과, 36개소 정원에는 정원식물 712종 류가 식재되고 있었다. 교목, 관목, 초본의 비중은 평균 1:2:7 이었다. 개별 정원(10×10㎡)에서 교목은 평균 2.5종으로 12.6%, 관목은 4.1종 20.7%, 초본은 13.2종 66.7%를 차지했다. 식재 빈도 상위 5%에 40여 종이 포함되었으며, 맥문동, 일본조팝나 무, 수국, 회양목, 단풍나무, 옥잠화, 에키네시아, 산철쭉이 대 표적이었다. 양지형 정원에는 관목이 상대적으로 적고 초본이 많았으며 다른 유형보다 20~40% 이상 다양했다. 그늘형은 초 본보다 교목이 많았으며, 건조형 및 습지형과 마찬가지로 식 재 다양성이 20% 감소했다. 옥상정원의 도시형 정원은 초본 이 전체의 80~90%를 차지하고, 해안형 정원에는 목본과 초본 이 1:1로 목본 중심의 식재 특성을 보였다. 결과적으로 정원 유형에 따라 식재 다양성과 구성 비율이 명확한 차이를 나타 냈다.

최근에 캐릭터 커스터마이징 서비스가 다양하게 보편화된 이후 서비스마다 모두 다른 UI와 용어들이 혼재하고 있어서 사용자들의 불편함도 함께 증가하고 있다. 또한 갑작스럽게 늘어난 서비스에 비해서 아직 활용할 수 있는 연구 결과나 디자인 가이드가 마땅히 없으므로 새로운 서비스를 기획하거나 개발할 때 참고할 만한 자료가 부재 하다. 본 연구에서는 현 시점에서 캐릭터 커스터마이징 UI들이 어떻게 구성되어 있는지 상위 5개의 메타버스, 모 바일 게임, PC게임 서비스의 캐릭터 커스터마이징 시스템 UI를 조사하고 경향을 분석했다. 첫째, 커스터마이 징 항목의 수는 분포가 매우 다양했다. 얼굴의 이미지 형성에 큰 영향을 미치는 눈, 눈썹, 입, 그리고 상체의 조절 항목이 가장 세분화 되어 있었다. 둘째, 용어의 일관성이 떨어져 기능을 인지하기 어려운 점이 발견되 었다. 셋째, 커스터마이징 조절 도구의 위치를 조사한 결과, 세로형 메타버스에서는 상￿하단에, 가로형 PC와 모바일 게임에서는 좌우 배치 또는 유동형 배치로 구성되어 있었다. 넷째, 커스터마이징 조절 도구의 유형은 대분류에서는 선택형, 중분류에서는 선택형, 하위 단계에서 조절형으로 구성되었으며 일부 복합형도 있었다. 다섯째, 조절 수치의 범위 역시 일관성이 없고, 초기 값에 대한 상대적인 수치의 가감으로 조절하고 있어서 사용자들의 정확한 의사소통과 직관성을 위한 보완이 요구 되었다. 여섯째, 색상 선택 기능은 일부 항목에 한정되어 있었고, 시스템에 제안된 범위의 색을 선택하거나 색공간을 이용할 수 있었다. 패션 선호도와 트렌 드를 민감하게 반영하고 있는 점이 발견되었다.

In this study, the effects of heat-moisture treatment (boiling or steaming for 45 min) prior to hot air drying (70 o C for 8 h) on water activity (Aw), moisture (MC), Brix, color, and texture of dried sweet potato slices were investigated to identify the best pretreatment condition for producing dried sweet potato with the best eating quality. Dried sweet potato slices pretreated by boiling (BL) showed significantly lower Aw, MC, and hardness while Brix was significantly higher than with steaming (ST) treatment. There were no significant differences for the color, springiness, cohesiveness, gumminess, and brittleness indexes. At 8 h drying, the Aw, MC, Brix, and hardness of the BL and ST samples were 0.81 and 0.82, 19.71% and 25.53%, 53.80% and 49.40%, and 20.49 kg/cm 2 and 31.98 kg/ cm 2 , respectively. This information will be useful for manufacturers in the production of dried sweet potato slices. These findings provide evidence of the feasibility of heat-moisture treatments in the production of dried sweet potato.

The early-onset familial Alzheimer's disease (EOFAD/ FAD), the less common type of Alzheimer's disease (AD) currently affects a vast number of individuals worldwide. This type is being inherited as an autosomal dominant fashion. Missense mutations on Amyloid precursor protein (APP) and Presenilins 1 and 2 (PSEN1 & PSEN2) are known as major genetic factors in FAD. Conversely, missense mutations on microtubule-associated protein tau (MAPT) are also thought to involve. Up to date, several triple-transgenic animal models with muted forms of the human APP, PSENs and MAPT have been reported. Compared to other animals, canines are more emotional and their disease signs can be easily diagnosed. This attempt was to develop a triple transgenic canine model for the AD. We have obtained the coding sequences of APP, PSEN1 and MAPT from Dana-Farber/Harvard Cancer Center DNA resource core at HMS and incorporated several common AD mutations. The transgenic construct is composed of hNSE (ENO2) promoter-driven three AD genes fused together with modified 2A sequences. It was transfected into the canine fetal fibroblasts which were then used to perform somatic cell nuclear transfer (SCNT). The viable transgenic embryos were obtained after in vitro culture and the GFP was detected. In this study, we have successfully produced viable triple transgenic canine cloned embryos using SCNT technique. These transgenic canine embryos will be further developed into canines with FAD. The transgenic canines will be a good candidate in the AD research field.

본 연구에서는 김치 제조시 철저한 재료 세척의 필요성을 확인하고, 더불어 비가열 식품인 김치의 위생 안전성 실태를 파악하여 효율적 미생물 저감화 방안을 마련하고자 국내에서 유통되는 김치 원·부재료 200건의 세척 전과 후의 비교분석과 시판 김치 100건에 대하여 미생물 분석을 실시하였다. 김치 원·부재료 및 완제품에 대하여 일반 세균수, 대장균 및 대장균군을 모니터링 하였으며, 병원성 미생물 9종(Bacillus cereus, Clostridium perfringens 정성·정 량, Staphylococcus aureus, Enterohemorrhagic Escherichia coli, Campylobacter jejuni/coli, Yersinia enterocolitica, Salmonella spp., Vibrio parahaemolyticus, Listeria monocytogenes 정성)을 분석 하였다. 모니터링 결과, 김치 원· 부재료 및 완제품에서 일반세균은 1.4~9.0 log CFU/g 수준 으로 확인되었으며, 원·부재료 중 생강에서 8.8 log CFU/g, 완제품 중 총각김치에서 9.0 log CFU/g으로 일반세균이 가장 높게 나타났다. 대장균군은 0.5~7.3 log CFU/g으로 확 인되었으며, 생강에서 7.3 log CFU/g으로 가장 높게 나타 났고, 병원성 미생물 9종의 분석결과, Bacillus cereus를 제 외한 나머지 8종의 식중독균은 모든 시료에서 검출되지 않았다. 김치 제조 시 사용되는 김치 원·부재료들의 세척 공정 후 미생물 수는 일반세균수 0.2~3.2 log CFU/g, 대장 균군 0.3~2.7 log CFU/g, Bacillus cereus 1.0~3.9 log CFU/g 감소하였다. 따라서, 김치 원·부재료의 세척 공정으로 미생물 오염도를 감소 시켰으며, 이 결과를 통하여 김치 완 제품의 위생 및 저장성 증진에 기여 할 수 있을 것으로 확인되었다.

풀무치(Locusta migratoria)는 메뚜기과에 속하는 곤충으로 70% 이상의 단백질을 함유하고 있어 식사료용 곤충으로 이용 가능성이 높다. 그러나 풀무치의 대량생산을 위한 연중사육 관련 연구는 미흡하여 사육방법 정립, 먹이원 선발 등이 필요하다. 본 연구에서는 풀무치의 연중사육을 위한 방법으로 사육밀도에 따른 생육 특성과 최적 산란처를 찾기 위해 상토, 오아시스 등을 이용하여 산란 특성을 조사하였다. 풀무치의 생육 온도는 28℃, 습도는 65% 내외로 유지하고 처리구별 생존율, 탈피횟수, 크기, 무게 등을 측정하였다. 사육밀도별 약충 기간은 32일 소요되었고, 생존율은 82~90 %였으며, 성충 기간은 110~120일 소요되었다. 산란처별 난괴 길이는 33~49mm였으며, 부화 후 생존율을 72~82%였다.

Bi0.5Na0.5TiO3 (BNT) based ceramics are considered potential lead-free alternatives for Pb(Zr,Ti)O3(PZT) based ceramics in various applications such as sensors, actuators and transducers. However, BNT-based ceramics have lower electromechanical performance as compared with PZT based ceramics. Therefore, in this work, lead-free bulk 0.99[(Bi0.5Na0.5)0.935Ba0.065](1-x)LaxTiO3-0.01SrZO3 (BNBTLax-SZ, with x = 0, 0.01, 0.02) ceramics were synthesized by a conventional solid state reaction The crystal structure, dielectric response, degree of diffuseness and electric-field-induced strain properties were investigated as a function of different La concentrations. All samples were crystallized into a single phase perovskite structure. The temperature dependent dielectric response of La-modified BNBT-SZ ceramics showed lower dielectric response and improved field-induced strain response. The field induced strain increased from 0.17% for pure BNBT-SZ to 0.38 % for 1 mol.% La-modified BNBT-SZ ceramics at an applied electric field of 6 kV/mm. These results show that Lamodified BNBT-SZ ceramic system is expected to be a new candidate material for lead-free electronic devices.

The goal of this study was to assess the effect of a group exercise program on cognitive function of elderly people. Subjects were chosen to be elders with dementia having minor to moderate degrees of cognitive function. Study was started out by randomly dividing the 16 subjects into two groups, each with 8 people; the group exercise group and the control group. The group exercise group performed 8 weeks of group exercise program and general physiotherapy while the control group only performed general physiotherapy. Cognitive function was measured by Korean version mini-mental state examination. The study group's attention and calculation statistically significantly improved but the control group saw no statistically significant change. The group exercise program affected improvement in cognitive function of elderly people with dementia and in particular, was effective for enhancing their attention and calculation.

We previously reported Pear Pest Forecasting Management System (PPFMS) for the Improvement of pass ratio of Korean exporting pears. It is consisted of regular field forecasting by pear farmers, meteorological data obtained by automatic weather station (AWS), an internet web page (http://pearpest.jnu.ac.kr/) as information collecting and providing ground, and information providing service. Currently, we are expanding this system to the area, Cheonan and Ansung, where pear orchards are organized into exportation-specific group. Further, the information obtained from field forecasting and AWS were up-loaded to under-constructing upgraded webpage (http://www.kpear.kr), with several pest/disease-related information. We hope this pest forecasting management system increases the pass ratio of Korean exporting pears throughout establishment of farmer-oriented forecasting, inspiring farmers’ effort for the prevention and forecasting of diseases and pests occurring at pear orchards.

The pear psylla, Cacopsylla pyricola Foerster (Homoptera: Psyllidae), is a serious insect pest of commercial pear crops. The species, which resides on pear trees throughout its life cycle, is rapidly spreading in some regions of the world. Given the life cycle, it is unclear how such a rapid spread has been facilitated. Presently, the population genetic structure of the species including genetic diversity and gene flow was studied to understand the nature of dispersal and field ecology of the species. Pear psylla was collected from several pear orchards in Korea. The 658-bp region of mitochondrial COI gene and the 716-bp long complete internal transcribed spacer 2 (ITS2) of the nuclear ribosomal DNA were sequenced. Unlikely other previously studied insect pests, the COI-based genetic diversity of the pear psylla was extremely low (maximum sequence divergence of 0.15%). This finding allowed us to conclude that the species may have been introduced in Korea relatively recently, possibly with the phenomenon of genetic bottlenecks. ITS2 sequence-based analyses of phylogeny, population differentiation, gene flow, and hierarchical population structure all concordantly suggested that the pear psylla populations in Korea are neither genetically isolated nor hampered for gene flow. These genetic data are concordant with the dispersal of an overwintering winterform morph outside the non-pear habitat in the fall and the possibility of subsequently longer distant dispersal.

This study was to investigate the effects of upper and lower limb composing patterns of PNF(proprioceptive neuromuscular facilitation) on the static balance ability by 20 subjects for 6 weeks. This study was measured left one leg standing and right one leg standing with closed eyes on Good Balance system. These results led us to the conclusion that the mean speed of X, Y direction, COP(center of Pressure) velocity moment showed a statistical decrease when applying post-exercise. The above results from this study indicated that upper and lower limb composing patterns of PNF exercise has improved the static balance ability. As a result, this study showed that upper and lower limb composing patterns exercise improve the ability of balance in young adults. Based on this study, it may be applied to old people.

The purpose of this study is to investigate the effects of closed and open kinetic chain exercise for increasing knee joint function on the knee position sense in the normal adults. Thirty normal adults(male 15, female 15; mean age: 22.13±2.58 years) were participated in this study into two groups, each with 15 people. The group I was trained that closed kinetic chain exercise on the knee joint and the group II was trained that open kinetic chain exercise on the knee joint. Exercise programs performed for 4 weeks, 3 times a week were using Shuttle 2000-1 closed kinetic chain exercise and Knee Extensor open kinetic chain exercise(HUR, Filand). The results of this study were as follows: 1) There were statistically significant decreasing of measuring error degree in 0-20。were found between before and after training in closed kinetic chain exercise(p<.05). 2) There were statistically significant decreasing of measuring error degree in 21-40。were found between before and after training in closed kinetic chain exercise(p<.05). 3) There were statistically significant decreasing of measuring error degree in 41-60。were found between before and after training in closed kinetic chain exercise(p<.05). 4) There were statistically significant decreasing of measuring error degree in 0- 20。were found between before and after training in open kinetic chain exercise(p<.05). 5) There were statistically significant decreasing of measuring error degree in 21-40。were found between before and after training in open kinetic chain exercise(p<.05). 6) There were statistically significant decreasing of measuring error degree in 41- 60。were found between before and after training in open kinetic chain exercise(p<.05). In conclusion, these results suggest that closed and open kinetic chain exercise has increased in the knee joint proprioception between before and after training. Especially, closed kinetic chain exercise could be more useful intervention than open kinetic chain exercise for increasing proprioceptive sense.