A bulk porous composite with plantinum nano-dispersion was synthesized in air atmosphere through the combination of several in situ reactions, including the pyrolysis of . A mixture of (dolomite), , and LiF (0.5 wt%, as an additive) was cold isostatically pressed at 200 MPa and sintered at for 2 h. The porous composite ( : Pt=99 : 1 in volume) had a uniformly open-porous structure (porosity: 56%) with three-dimensional (3-D) network and a narrow pore-size distribution, similarly to the porous composites reported before. Catalytic Properties (viz., NO direct decomposition and NO reduction by ) of the composite were investigated up to . In the absence of oxygen, the NO conversion rate reached ~52% for the direct decomposition and ~100% for the reduction by , respectively. The results suggest the possibility of the porous composite as a multifunctional filter, i.e., simultaneous hot gas-filtering and in one component.

천연흑연은 단위구조가 탄소육각망평면이 평행하게 배열된 층상으로 전기전도도 및 윤활성이 우수하나 소수성이 매우 강하며, 표면화학적 목성이 거의 없기 때문에 다른 물질과 흡착이 쉽게 일어나지 않아 분산이 매우 어려운 물질이다. 따라서 본 연구에서는 제타전위를 이용하여 흑연에 ABDM을 흡착시켜 표면특성을 소수성에서 친수성으로 변화시키고 수중현탁액 중에서 흑연입자의 분산 메커니즘을 DLVO이론을 이용하여 설명하였다. 흑연의 제타전위가 22.5mV가 되도록 ABDM의 흡착량 (20mg/g) 및 조건 (PH 10에서 12시간 흡착)을 만족시키면 분산안정성 (T1/2) 이 44.5시간인 고분산성 흑연 현탁액을 제조할 수 있다.

Al2O3/ZrO2 비수성 현탁액의 분산과 레올로지에 미치는 methyl isobutyl ketone (MIBK) /ethanol (EtOH) 용매혼합의 영향을 침전밀도, 점도를 측정함으로써 조사하였다. 분산제 'Hypermer' KD-1이 첨가된 다량의 MIBK를 함유하는 용매 (≥60vol%)에서 Al2O3와 ZrO2 입자의 침전밀도는 증가하였다. 80MIBK/20EtOH(vol%)에서 ball milling한 현탁액이 좁고 unimodal한 입자크기분포를 나타내었다. 모든 현탁액은 의가소성유동을 나타내었으나 shear thinning은 Al2O3/ZrO2의 혼합비, MIBK/EtOH의 혼합비에 따라서 다소 다르게 거동하였다. 순수한 MIBK를 사용한 Al2O3(<300 s-1 ) 및 ZrO2(<3000 s-1 ) 현탁액은 주어진 전단속도범위내에서 가장 강한 shear thinning을 나타내었다. 동일한 용매 (80MIBK/20EtOH, vol%)를 사용한 경우의 shear thinning은 Al2O3/ZrO2의 혼합비에 거의 의존하지 않았다.

귤응애의 예찰방법을 개발하기 위하여 제주지역의 온주밀감원에서 귤응애 분산형태에 대해 2개년(1999~2000년)에 걸쳐 잎 표본에 대하여 각 조사일에 평균밀도를 조사하였다. Taylor's power law와 Iwao's patchiness regression을 이용하여 분산지수를 비교하였으며, 잎 표본 조사에서는 일반적으로 Taylor's power law가 Iwao's patchiness regression보다 평균-분산 관계를 더 잘 나타내었다. Taylor's power law의 기울기와 절편은 조사한 포장 간에 차이가 없었으며, 여기에서 얻어진 상수값을 이용하여 잎 표본 조사에 의한 귤응애 약 .성충에 대한 고정정확도수준에서의 표본조사법을 개발하였다. 이 조사법에 대해 resampling 기법을 이용하여 독립된 4개의 조사자료를 이용하여 분석한 결과 실질 고정정확도(D)값이 요구되는 D값보다 항상 낮았으며, 나무당 귤응애 밀도가 8마리 이상에서 필요한 조사 나무수는 18주보다 작았다.

We tested the characteristics of the BOAO Medium Dispersion Spectrograph (MDS) such as the CCD capabilities, wavelength shift by gravity direction variation, slit illumination function and efficiency. Then we calculated the appropriate exposure time to obtain the given S/N ratio for several given magnitudes. Also the remaining problems to be improved were discussed.

Monodisperse polymer particles have many industrial applications such as surface coatings for metal panels, chromatographic media, spacers for liquid crystal display panel, and fillers for cosmetics, etc.. Micron-size monodispersed poly(methyl methacrylate) particles were prepared by dispersion polymerization in methanol medium in the presence of poly(vinyl pyrrolidone) and 2,2'-azobis(isobutyronitrile) as steric stabilizer and initiator, respectively. Effects of polymerization parameters, such as monomer and initiator concentration, stabilizer type and concentration, solvent composition on average particle size and size distribution were studied.

기계적 합금화 공정으로 제조한 1μm 이하 크기의 Cu6Sn5를 63Sn-37Pb 솔더합금에 첨가하여, Cu6Sn5 첨가분율에 따른 미세구조와 기계적 성질을 Cu를 첨가한 솔더합금과 비교하였다. Cu6Sn5를 첨가한 솔더합금에 비해 Cu를 첨가한 솔더합금에서 첨가분율에 따른 Cu6Sn5 함량의 증가와 크기 성장의 정도가 더욱 현저하게 발생하였다. Cu를 첨가한 솔더합금에 비해 Cu6Sn5를 첨가한 솔더합금에서 항복강도의 향상 정도는 저하하였으나, 더 높은 최대인장강도를 얻을 수 있었다. 1~9 vol%의 Cu6Sn5를 첨가함에 따란 63Sn-37Pb 솔더합금의 항복강도가 23 MPa에서 36MPa 정도로 증가하였으며, 1~9vol%의 Cu 첨가시에는 항복강도가 40 MPa로 향상되었다. 각기 5 vol%의 Cu6Sn5와 Cu를 첨가함에 따라 63Sn-37Pb 솔더합금의 인장강도가 34.7 MPa에서 45.3MPa and to 43.1 MPa로 향상되었다.

To predict the oil spill dispersion phenomena in the ocean, the oil spill response model, which can be used for strategic purpose on the oil spill site, based on Lagrangian particle-tracking method was formulated and applied to the neighboring area with Pusan port where the oil spill incident occurred when the tanker ship No.1 Youil struck on a small rock near the Namhyungjeto on September 21, 1995. The real-time tidal currents to be required as input data of the oil spill model were obtained by the two-dimensional hydrodynamic model and the tide prediction model. Evaluation of tidal currents using observation data was successful. For wind data, other input data of oil spill model, observed data on the spot were used. To verify the oil spill model, the oil spill modelling results were compared with the field data obtained from the spill site. Compared the modelling results with the observation data, there exist some discrepancies but the general pattern of modelling results was similar to that of field observation. The modelling results on 7 days after spill occurred showed that the 40% of spilled oil is in floating, 36% in evaporated, 23% at shore, and 1% in out of boundary, respectively. According to the evaluation of weighting curves of effective components to the dispersion of oil, the winds make a 37% of contribution to the dispersion of oil, turbulent diffusion 39.5%, and tidal currents 23.5%, respectively. Provided the more accurate wind data are supported, more favorable results might be obtained.

Polyoxyethylene monooleate was prepared by addition of ethylene oxide to oleic acid. And also, polyoxyethylene monooleate type oil dispersant was prepared by blending polyoxyethylene monooleate, n-paraffine, sorbitan monooleate, sorbitan monopalmitate, and palm oil. Dispersion efficiency test was carried out by vertical shaking flask and swirling flask methods. Low toxic oil dispersant was prepared with polyoxyethylene monooleate, which has high biodegradability and excellent dispersion efficiency on crude oils and weathered W/O emulsions with high viscosity, and its dispersion efficiency was measured to various crude oils and weathered oils.

The sodium α-sulfo fatty acid vinyl ester oligomers, which are oligomer type surfactants were prepared by polymerization with fatty acid vinyl acetate. The α-sulfonation of fatty acid vinyl ester oligomers were carried by direct addition of sulfur trioxide. The dispersing performance of oligomer type anionic surfactants and sodium dodecyl sulfate(SDS) in the aqueous suspension of iron oxide and titanium dioxide particles was evaluated by particle size distribution and zeta-potential measurement. As results, the particles of iron oxide and titanium dioxide were flocculated by addition of small amount of oligomer type anionic surfactants and sodium dodecyl sulfate(SDS), then the flocks redispersed by more addition of oligomer type anionic surfactants and SDS. The flocculation, redispersion process was observed in lower concentration range of oligomer type anionic surfactants than SDS. Especially, the dispersing action of sodium α-sulfo palmitic acid vinyl ester oligomer was better than sodium α-sulfo lauric acid vinyl ester oligomer.

The analytical solutions of the Fraunhofer Diffraction(FD) theory and the principle for measurement of the dispersion relation of plasma wave is presented. Especially, the method for measurement of low-frequency wave is discussed. The wavenumbers of the density fluctuations are obtained from the curve fitting between the expremental FD profile and theoretical one for each frequency component. In measurement of the wavenumber of the low -frequency region, the information of the wavenumber is easily obtained from the ratio of the intensity at = 0 to the intensity at =0.5. The millimeter wave FD apparatus was designed to measure low-frequency density fluctuations. The determined wavenumbers are in the range of =0.1~ 1.0cm. Thus, the millimeter wave FD method was shown to be useful for the measurement of low-frequency density fluctuations, which are impossible to be measured by using a convention. Thomson scattering. The obtained dispersion relations will be useful information for plasma waves.

A simple, rapid and simultaneous analytical method is described for the detection of Sulfonamide and Tetracycline residues, i.e., Sulfamerazine (SMR), Sulfamethazine (SMT), Sulfamonomethoxine (SMM), Sulfadimethoxine (SDM), Sulfaquinoxaline (SQN), Oxytetracycline (OXY), Tetracycline (TC), Chlortetracycline (CTC). Blank control and sulfonamide and tetracycline fortified fish muscle samples (0.5 g) were blended with octadecylsilyl (C,e, 40 gm, 21% load, 60Å) derivatized silica packing material (2 g). Blended fish samples were washed with hexane, then, benzene and dichloromethane were used for the elution of tetracycline and sulfonamide, respectively, The eluants containg tetracycline and sulfonamide were analyzed by HPLC. Correlation coefficients of standard curves for individual sulfonamide and tetracycline isolated from fortified samples were linear (0.9993±0.0003-0.9997±0.0003, 0.9493±0.078-0.9753±0.036), respectively, The average percentage recoveries of sulfonamide and tetracycline ranged as 80.86-96.52% to 85.88-92.23%, and 30.01-37.12% to 65.89-73.40%, for the concentration range (0.1--1.0 ppm) examined, respectively. Limit of detection for sulfonamide was 0. 05 ug/g, then, tetracycline was 0.1 ug/g. Detection of quantitation of sulfonamide residue was 0.0012 ppm for SMR in Paralichthys Odiuacleus and 0.0020 ppm for SMR, 0.015 ppm for SMM in Cyprinus Carpio. The applicability of this procedure is demonstrated by separation and detection of incurred tetracycline and sulfonamide residues in fish muscle tissue.