In this paper, four point bending tests were carried out to analyse flexural strengthening effect by CFRP (Carbon Fiber Reinforced Polymer) layers for I shape PFRP (Pultruded Fiber Reinforced polymer) flexural member retrofitted with CFRP sheet. Comparing load-displacement relation and sectional stress distribution, the flexural strengthening effect by the number of CFRP layers was founded.

In ancient Chinese religion peoples prayed powerful spirits of nature, for example 祟•蠱• , these are the scourge that the insect as evil spirit brings. The magic ritual is done for such scourge． The city and feudal system associated with the establishment of royalty developed, along with the formof ritual changed, the blade statement concerning ritual such as 祭•祀and such as 史•使•事that means sacrificial rituals appeared. Further 師•追 that uses 𠂤; (that means festival meats) and 降•隠•際 that uses 阝(that means god ladders) as the characteristic theory of Dr.Sirakawa is considered．

In this study, the differences of holding power according to the shape and weight distribution of concrete weight used in shellfish shell fishery were investigated through the experiments. To investigate the differences in shape, five bar-shaped concrete weights with the same length and different cross-sectional shapes were produced. The sectional shape of each weight was square, triangle, circle, small cross, and large cross (SQ, TR, CI, CR-S, CR-L). Ten rectangular parallelepiped weights with different bottom area and cross-sectional area were produced. To investigate the differences by the weight distribution, the holding power on the square model (SQ) with six 50 g weights at different positions was investigated. All the holding power was obtained by measuring the tensile force generated when the concrete weight was pulled at a constant speed on the sand. As a result, there were no differences in holding power between the ten rectangular weights. However, the experiment on weights with different cross-sectional shapes showed differences in holding power. The holding power was higher in the order of CR-L > CR-S > CI > TR > SQ. In the weight distribution test, the holding power was higher as the front side of the weight was heavier. Generally, the frictional force is the same even if the shape is different, when two objects have the same value in the weight and the roughness. On the other hand, it seems to have a large impact when the shape of the bottom is deformed in the course of pulling the object. Particularly, the larger the degree of protrusion like cruciform weights, the more the holding power increased while deeply digging the bottom. It is also likely that the holding power increases as the front weight increases.

As the size of the wind turbine tower becomes larger and larger, research on assembled wind turbine tower that is advantageous for transportation and installation is continuing. Large wind turbine tower require door openings for maintenance. The opening of the tower has an irregular cross section, and an excessive stress is generated due to the door opening. The result is structural damage to the tower and many accidents. In this research, stress analysis was performed on a model with internal stiffener to prevent excessive stress. The stress was investigated around the openings where the tower was resonant and excessive stressed, and the shape of the openings was optimized. Through optimization, we confirmed that the maximum stress was reduced by about 6% with respect to the initial value.

The object of research is based on 1.5 MW wind turbine blade. This paper has carried out the aerodynamic shape optimization design of wind turbine blade. Based on the aerodynamic basic theory of wind turbine blade design and combined with particle swarm optimization algorithm(PSO), the design optimization model of the aerodynamic shape of blade is established. Through this study, the optimization results of the angle inducing ′ and tangential inducing  were obtained. The calculation programs are written and calculated chord length and torsion angle of the blade used by ′ and . The calculation result for the optimized wind turbine was 1.38 MW when the wind speed was 16 m/s. The 8 % error could be considered as an engineering acceptable error and the calculated values can be proved the correctness of the design value.

Gd2O3:Eu3+ red phosphors were prepared by template method from crystalline cellulose impregnated by metal salt. The crystallite size and photoluminescence(PL) property of Gd2O3:Eu3+ red phosphors were controlled by varying the calcination temperature and Eu3+ mol ratio. The nano dispersion of Gd2O3:Eu3+ was also conducted with a bead mill wet process. Dependent on the time of bead milling, Gd2O3:Eu3+ nanosol of around 100 nm (median particle size : D50) was produced. As the bead milling process proceeded, the luminescent efficiency decreased due to the low crystallinity of the Gd2O3:Eu3+ nanoparticles. In spite of the low PL property of Gd2O3:Eu3+ nanosol, it was observed that the photoluminescent property was recovered after re-calcination. In addition, in the dispersed nanosol treated at 85 oC, a self assembly phenomenon between particles appeared, and the particles changed from spherical to rod-shaped. These results indicate that particle growth occurs due to mutual assembly of Gd(OH)3 particles, which is the hydration of Gd2O3 particles, in aqueous solvent at 85 oC.

The purpose of this study was to classify the upper torso body types of obese Korean adult women using the 7th Korea National Anthropometric Study data and compare the body type differences according to three age groups: 20s～30s, 40s～50s, and 60s. A total of 548 adult women whose BMI was in the obese range of 25 or higher and whose age ranged from 20s to 60s were selected from the anthropometric database. Twenty-nine body measurements related to torso and arm areas important for torso and sleeve pattern development were chosen. Five drop values by differences between bust, waist, and hip circumferences were also chosen for analysis. The number of obese women increased with age. The results revealed seven factors according to the factor analysis and three obese body types based on the cluster analysis. Body type 1 (47.3% of obese women) was characterized by narrow shoulders, a small or medium torso, and a straight waist. Body type 2 (42.4% of obese women) was characterized by a defined waist and a larger lower torso than upper torso. Body type 3 (10.3% of obese women), the largest obese body type among the three types, was characterized by a large bust, large abdomen area, and long upper torso. Women in their 20s to 30s were most likely to have body type 2, women in their 40s to 50s were evenly distributed between body types 2 and 3, and women in their 60s were most likely to have body type 1.

본 연구의 목적은 트러스의 형태를 바꿔가며 엇갈린 트러스(STF) 시스템의 내진성능을 평가하는 것이다. 예제 구조물은 10층의 철골조 사무실 건물이며, 시스템별로 각각 프랫트러스, 하우트러스, 와렌트러스, 케이트러스와 비렌딜트러스를 적용 하였다. 중력하중, 풍하중, 지진하중을 고려한 구조해석을 실시하여 부재에 높은 DCR을 만족하는 단면을 산정한 후 고유주 기, 밑면전단력과 층간변위를 산출하였다. 그 후, 역량스펙트럼법을 통해 1.2배의 설계지진(DE)과 최대고려지진(MCE)에 대 한 성능점을 산정하고, STF 시스템의 항복여부 및 소성힌지의 분포를 파악하여 구조기준에서 제시한 목표성능수준을 만족 하는지 살펴보았다. 평가 결과, 모든 시스템이 해당 목표성능수준을 만족하였으며, 시스템의 경제성 및 효율성을 따져보았을 때, PR10이나 VR10이 가장 적합한 것으로 나타났다.

본 연구에서는 E-textile 기반 신축성 센서의 모양과 부착 위치가 동작 센싱 성능에 미치는 영향을 분석하고, 이를 통해 인체 동작 센싱에 가장 적합한 의복 구조 요건을 규명하고자 하였다. 실험 대상 아동에게 센서의 모양과 부착위치에 따라 조작된 실험복을 착의시킨 후 60 deg/sec의 속도로, 60°, 90°, 120°의 동작 각도별로 팔과 다리의 굽힘, 폄 동작 의한 직물 센서의 신장과 수축에 따른 전압의 변화량을 측정하였으며, 가속도 센서를 함께 부착하여 동작의 일치도를 검증하였다. 또한 아동의 모형 팔과 다리를 제작하여 이를 대상으로 동일한 실험을 수행함으로써 인체의 팔, 다리의 동작 실험 결과와 비교하였다. 분석 결과 센서의 모양에서는 모형 대상 실험과 아동 대상 실험 모두에서 보트형의 센서 보다 장방형의 센서가 더 균일하고 안정적인 경향을 보여 재현성과 신뢰성이 높은 것으로 나타났다. 센서의 부착 위치는 모형 대상 실험에서는 팔꿈치와 무릎의 관절부로부터 4 ㎝ 아래 지점에 부착된 경우, 아동 대상실험에서는 팔꿈치와 무릎의 관절부에 위치했을 때 재현성과 신뢰성이 더 높았다. 본 연구에서는 아동의 사지 동작측정에 적합한 센서를 개발하고 동작 센싱에 적합한 센서의 모양과 부착 위치의 조건을 분석하였으며, 의복에 통합된 유연한 직물 센서를 활용하여 인체 부위별 동작 센싱이 가능하다는 것을 규명하였다.

고속 활주선에서 차인은 활주자세 변화 뿐 아니라 선체의 균형을 잡아주는 역할을 하며, 저항성능에 큰 영향을 미친다. 그러나 이러한 차인의 설계는 배수량, 선저경사각, 흘수, 선폭 등 다양한 설계 인자들에 영향을 받는 변수로 많은 경험을 필요로 한다. 본 연구에 서는 경험식이 아닌 계산을 통해 차인에 대한 설계 시 형상에 대한 기본적인 지침 마련을 목적으로 고속 활주선의 차인의 형상에 따른 저항성능에 대해 계산하였다. 설계는 상용 설계 프로그램인 Yacht-one을 이용하였으며, 유동해석은 상용 해석프로그램인 STAR-CCM+으로 DFBI(Dynamic Fluid Body Interaction)방법을 적용하여 수행하였다. 초기 설계 차인 각도인 17도를 기준으로 차인 15도, 차인 16도, 차인 19도 로 변경하여 설계 속도인 30노트에서 해석을 수행하였다. 그 결과, trim은 4개의 차인 중 16도가 가장 컸으며, heave는 차인 15도에서 가장 우수하였다. 해석 결과를 봤을 때 저항 측면에서 초기 설계 각도인 차인 17도 보다 차인 16도가 우수함을 보이고 있어 실제 설계 시 초기 설계 각도에서 +2도, -2도의 범위로 계산을 통해 저항 성능과 자세에서 우수한 차인을 선택해야 함을 알 수 있다.

In the present study, FE analysis was performed for characterising structural strength of a seat frame w.r.t. varying sectional shapes as well as different materials of the seat back frame based on the FMVSS 207 regulation in order to obtain the design outline of a lightweight seat frane structure. Four types of materials, i.e., SAPH440, Al7021, Al6082 and carbon/epoxy composites were applied to the seat back frame type beams and their bending behaviours were compared by three point bending FE analysis. Consequently, the lightweight structure of seat back frame with the equivalent strength characteristics of conventional frame was suggested.

본 연구는 진동에너지를 흡수하기 위한 진동 금속 댐퍼의 구조 해석과 최적 설계를 수행한다. 고무 베어링, 마찰 또는 점성 댐퍼와 같은 다른 댐퍼와는 달리 이 금속제진장는 금속의 소성 변형과 그에 따른 히스테리시스 현상을 이용하여 구조물의 진동을 감소시킨다. 이 금속제진장치를 최적화 하려면 댐퍼를 통해 소성 변형을 얻는 것이 중요하다. 금속제진장치의 최적화 된 형상을 찾기 위해 형상 최적화 방법을 적용하였다. 또한 매개 변수화 체계에 따라 일부 최적의 모양을 찾을 수 있다.

The widely accepted understanding that a Chinese character has three factors, i.e., form, sound and meaning, takes sound and meaning into the account of the Chinese Graphology; this has too broad a scope. On the other hand, the view that “Chinese Graphology is in essence the study of the graphic shape” is too narrow. From my observation, Chinese characters have three properties of their own: shape, constitution and function. To start from here may in necessity attain three branches of it, that is, the study of Chinese graphic constitution and the study of Chinese graphic functions, each forming a system of its own. These three systems do not stand in parallel, nor in layers, but three independent and not severed planes of the noumenon of Chinese characters. In other words, they constitute what the Chinese Graphology should concern. This may be termed “the Three-Plane Theory of Chinese Graphology”. A dozen years of researches of ours have proved that this theory, and the study of Chinese graphic function in particular, have both important theoretical and wide-reaching practical values.

The purpose of this study is to fundamentally examine the vests of the robes “Daeraebok” and “Soraebok” of the Korean Empire from the 1876 Port Opening to the 1910 annexation of Korea to Japan. Among the collections of different robes of the Korean Empire which belong to various universities and institutions, only the vests were surveyed. The shape of the vests in the Korean Empire were single-breasted and doublebreasted. Most V-necklines and vests with a shawl collar look like a tailored collar, where the collar outline was shaped like a notched and picked collar, which is a mix of the step collar and roll collar of the 19th century. The rear center line was not flat, but inclined to a triangle. All vests of the robe Daeraebok were equipped with gold buttons, and those of the robe Soraebok had black satin buttons. The tailoring characteristic is that the front has a different material (dark black wool) from the back (black silk). This characteristic is expected to be an important basic piece of information in the restoration and reproduction of the vest, which was worn during the imperial period, especially to reveal its shape, characteristics and composition. This characteristic can also be used as data of cultural contents based on Korean modern history.