충남 일원에 분포하는 초염기성 암석과 이에 수반되는 각섬암, 편암, 편마암에 대해 탄성파 및 밀도가 실험실에서 측정되었다. 밀도측정 결과 사문암은 2.6∼2.86g/cm3, 활석은 2.25∼2.81g/cm3, 변성암류는 2.74∼3.07g/cm3의 범위를 갖는다. 이 결과 활석은 사문암으로부터의 변성과정으로 사문암 및 각섬암보다 넓은 범위를 보였다. P파와 S파의 속도는 사문암에서 각각 5719∼6062m/s, 2898∼3351m/s 이고, 활석에서 4019∼5478m/s, 2241/∼2976m/s, 각섬암에서 5375∼6372m/s, 3042∼3625m/s, 편암에서 5290∼5499m/s, 2968∼3137m/s, 편마암에서 4788m/s, 2804m/s를 보였다. P파의 속도는 밀도가 증가함에 따라 S파의 속도보다 1.47배 빠르게 증가하였다. 탄성파 속도와 밀도 사이에 비례관계가 성립하며, 특히 밀도에 따른 P파 속도 증가율이 S파 속도증가율보다 약 1.47배 크게 나타났다. 탄성파속도의 이방분석결과 편리와 직각 방향의 속도값이 평행방향의 값보다 높았는데, 특히 변성암이 더 큰 차이를 보이는바, 이는 변성암의 형성이 지체구조성 압력의 영향으로 인한 광역변성작용에 의한 것임을 시사한다. 압력의 변화에 따른 탄성파속도 변화분석 결과 대체로 압력이 20 MPa에서 70 MPa로 증가함에 따라 변성암의 탄성파속도 증가가 다른 암석에 비하여 크게 나타났다. 재계산된 탄성파속도는 각섬암이 이 지역 하부 지각에 대한 탄성파 특성을, 편마암류 및 편암은 상부지각 암석의 탄성파 특성을 지시한다고 생각된다. 한편 사문암의 측정치는 높은 사문암화 정도를 반영하기는 하지만 상부 맨틀의 암석에 대한 탄성파의 특성을 지시한다 볼 수 있다.

This study aims at examining the background and development process of Masan city after Koryo Dynasty, making a reconstructive map of Original Masan using the first registration maps made in 1912 and analyzing the urban structure of the Original Masan area. The origin of Masan city went back to Koryo dynasty. Around 1040 Koryo government placed an official shipping facility in Masan to transport the taxed grain to the capital city. After that Masan became an important port covering the southern part of KyungSang-Do. And the urbanization of the Original Masan began to bud after a shipping facility was again established by the Chosun Dynasty in 1760 and strengthened in the 19th century after the social standing system was broken and many peasants moved to cities as daily workers. In 1899 Masan was forced to be opened to foreign powers and they placed an international settlement distanced from the area(Original Masan). After this many Japanese advanced to the international settlement and further to the area. The advancement of Japanese brought a critical change in the urban structure of the area. Land was owned by Japanese and many modern sysytems were introduced such as modern buildings, new roads, railroad and modern factories. According to the reconstructive map of the area, 80.5% of land lots are less than $200m^2$ 수식 이미지 showing the size of each land lot is comparatively small. And Japanese occupied 31.5% of the land in the area. Their land was located on the stratigic points near the port and the center of commerce. The ratio of the road area to the whole land was around 14%, not so low for urban areas in that time. The reconstructive map reveals the exact coastline of the year 1912 erased now due to filling the sea and extending the land, Present Masan city has been developed having the Original Masan as its nucleus. The area has been always the center of urban activities for Masan city. Making an exact reconstructive map for the area and analyzing the urban structure of the area in 1912 is a very important work to understand Masan city wholy.

생태학적 관점에 입각한 환경 교육 과정 개발 연구의 일환으로, 초, 중, 고등학교의 과학 교과서에 실려있는 환경 관련 내용을 1)환경 오염의 원인, 2)환경 오염의 실태, 3)생태계 원리, 4)환경 위기극복을 위한 노력 등 4분야로 구분하여 분석하였다. 본 연구 결과, 초, 중, 고등학교 과학 교과서에 실려있는 환경 관련 내용은 생태주의적 관점보다는 환경주의적 관점에서 저술된 것으로 파악되었고, 또한 환경 관련 내용들은 서로 교과목간 또는 교과목 내에서

The objectives of this study is to investigate the optimum reaction conditions and to identify the product formula in the synthesis of a silicone/acrylic resin that curing in moisture at room temperature. By the addition polymerization of monomers, n-butyl acrylate, methyl methacrylate, n-butyl methacrylate, and 3-methacryloxypropyltrimethoxysilane. a quarter polymer was obtained. Among various initiators investigated in this study, 2.2'-azobisisobutyronitrille was found to be the most suitable initiator. The optimum reaction conditions found in this study are 70 wt% of initial solvent amount, 120 minutes of dropping time, 3 times of initiator addition, 82~105℃ of reaction temperature, and 8 hrs of reaction time. Also, number average molecular weight of 11700~33100 and molecular weight distribution of 1.81~3.44 were obtained.

The present study is concerned with the effect of PM process variables on the microstructure by using atomized superalloy powders. It is suggested that the inhomogeneity of composition is strongly dependent on the process variables. The contents of segregation elements of plasma rotating electrode process (PREP) powders are larger than those of Ar atomization (AA) powders. As HIP treatment temperature in-increases, the secondary phases on the prior particle boundaries (PPB) have continuous,uniform distribution and high density, but the amount of PPB decreases suddenly at 1150C. Segregated phases on the PPB are identified to be MC type carbide. Brittle MC type carbides on the PPB provide fracture initiation sites and preferred fracture path, thereby leading to intergranular type brittle fracture.

This study was performed with 482 subjects(278 boys and 204 girls in Seoul and Kyunggido area) to find out the attitude and eating behaviors about Kimchi on Korean young generation. General characteristics about subject and attitude and eating behavior were surveyed by self-developed questionnaires. 85.9% of the subjects were nuclear family type and 49.9% of respondent's mother had full-time job and 96.1% of subjects were middle or upper economic status. The preference for Kimchi, 60.4% of respondents answered that they liked Kimchi. According to grade, the rate of preference about Kimchi was significantly different, higher grade students were found higher preference on Kimchi : 64.4% of middle and 70.4% of high school students liked Kimchi. The eating patterns of Kimchi, up to 60% of respondents answered they ate Kimchi in every meal time, which suggested that it was still an important side dish in Korean meal among teenagers. The eating behaviors on Kimchi, 85~90% of respondents answered that they preferred Kimchi in meal time. Baechu Kimchi(chinese cabbage Kimchi) and Gakdugi(radish cube Kimchi) was highly preferred. And their preference of food which made from Kimchi (such as Kimchi fried rice, Kimchi stew, Kimchi pancake) was highly evaluated. 65.6% of residents pointed out that 'Kimchi is very nutritious food'. The respondent's structure of value on Kimchi were not significantly difference between sex and age. But it was significantly difference(p〈0.01) between the groups with preference and familiarity on Kimchi. The group had higher preference and familiarity on Kimchi agreed to the positive values about Kimchi. These result suggested that various kinds of Kimchi should be developed for young generation to meet their taste and also continuous nutrition education about traditional food especially Kimchi should be promoted at home and school.

The microstructures and mechanical properties of submicron WC-Co cemented carbides were investigated in relation to cobalt content. To inhibit the WC grain growth during sintering, VC was added as a inhibitor in each alloy with 3 mass% to the cobalt content. The WC-(5, 8, 10, 15, 20) mass% Co compacts were sintered at for 30 min in vacuum. Some of WC-(5, 8, 10) mass% Co sintered compacts were HIPed with 120 atm at 130 for 1 hr. The shrinkages of all HIPed alloys were increased without depending on the cobalt contents and the sintered densities of them. The relative densities of the alloys were increased with the cobalt content and HIPing. The less the cobalt content, the larger the WC grain. Many contiguities of WC grains were found in WC-5 mass% Co alloy. The sizes and numbers of pores in the alloys were decreased by HIPing. And also the strength and the hardness of each alloy were increased. The maximum hardness was about 18.95 GPa in the WC-5 mass% Co alloy HIPed and the maximum transverse-rupture strength (T.R.S.) 3.2 GPa in the WC-20 mass% Co alloy sintered.

Ultrafine WC-10wt.%Co cemented carbides powders were synthesized by direct carburization. W-Co composite powders and carbon black powders were mixed by wet ball milling and dried. The mixed powders were heated to 800 with heating rate of 8.2/min and held for various times in flowing . For carbon addition of 140%, the carburization was completed by heating at 80 for 4 hours. The carburization time decreased with increasing amount of carbon and carburization was completed by heating at 800 for 2 hours with carbon addition of 150%. WC-10 wt%Co cemented carbides powders fabricated by direct carburization have nanoscale WC(100 nm) size.

본 연구는 정상 성인에서 관상동맥질환의 위험인자로 알려진 혈액내 Lipoprotein(a)농도의 실태를 파악하고 이들 농도와 지질농도, 섬유소원, 공복혈당 및 일상생활요인과의 관계를 알아보고자 수행되었다. 연구대상은 서울지역 일부 초, 중, 고교 교사들로 의료보험 관리공단의 신검에서 건강상태가 양호하다고 판정받은 남자 80명, 여자 60명을 대상으로 혈액분석과 설문 조사를 1990년 11월 2일부터 11월 7일에 걸쳐 실시하였다. 혈액분석 결과에 따라 이 들을 정상군과 위험군으로 나누고 이들 군들 사이에서 Lipoprotein(a)농도와의 연관성을 알아보았다. 결과는 다음과 같다. 1. 전체 대상자들 중 관상동맥질환 유발의 위험수준인 30㎎/dL을 초과하는 대상자는 140명 중 37명으로 26.4%에 달했다. 대 상자들의 Lipoprotein(a) 평균농도는 남자는 15.94± 12.70 ㎎/dL,여자는 17.92±17.58㎎/dL로 성별간의 유의한 차이는 없었다. 2. 대상자의 연령에 따른 Lipoprotein(a)농도의 경우 연령간에 유의한 차이를 보였다(p<0.05). 3. 대상자의 혈액을 분석하여 각 항목에 대해 정상군과 위험군으로 나눈 후 Lipoprotein(a) 농도와 각 항목들간의 유의성을 살펴본 결과 1) Aspartate aminotransferase, Alanine aminotransferase와 Lipoprotein(a) 농도 사이에는 유의한 차이가 나타나지 않았다. 2) 공복혈당, 섬유소원과 Lipoprotein(a) 농도 사이에도 유의한 차이가 관찰되지 않았다. 3) 지질농도(총콜레스테롤, 고비중 지단백콜레스테롤, 저비중 지단백 콜레스테롤, 중성지방)와 Lipoprotein(a) 농도 사이에도 유의한 차이가 발견되지 않았다. 4) 일상생활요인과 Lipoprotein(a) 농도와의 경우 혈압, 비만도, 성별, 흡연 등에서는 유의한 차이가 나타나지 않았다. 그러나 육식 섭취, 음주, 염분 섭취의 정도에 따라서 이들과 Lipoprotein(a)농도 사이에 유의한 차이가 있는 것으로 나타났다(p<0.05). 5) 혈액분석 결과와 일상생활요소를 모두 통털어 Lipoprotein(a) 농도가 고려된 경우 나이와 육식섭취의 정도^(*)에 따라 정상군과 위험군에서 유의한 차이가 관찰되었다(p<0.05, p<0.01^(*)).

기존 산화물 투명전극에 비해 더욱 우수한 전기전도성을 가지는 다층구조의 투명전도막을 마그네트론 스퍼터링 장치를 이용해 제작하였다. 전기전도성을 극대화하기 위해 비저항이 가장 낮은 Ag 금속을 사용하고, 금속층의 상하부에 반사광을 재반사시키는 산화물층을 형성시킨 다층막구조를 이용하였다. Ag 금속막은 충분한 투과율과 전기전도성을 확보하기 위해 연속된 막을 이루기 시작하는 두께인 140Å로 증착하였고, ITO 박막은 가시광 영역의 반사광을 재반사시키는 최적의 두께인 600Å 내외로 증차하였다. Ag 박막의 증착조건과 후속 ITO 박막증착공정은 Ag박막의 특성에 영향을 미치므로 다층막의 전기적, 광학적 특성은 이들 증착 조건에 민감한 영향을 받음을 확인하였다. 상온에서 Ag박막을 형성하고 ITO박막은 7mTorr의 낮은 압력에서 증착하여 제작한 투명전도막은 SVGA 급의 STN-LCD용 투명전극으로 사용 가능한 4Ω/ㅁ 이하의 낮은 면저항과 빛의 파장이 550nm일 때 85%이상의 투과도를 나타내었다.

21세기 자동차 사회에서는 대도시 대기오염이 적고, 에 관련된 지구규모 온난화문제에 영향이 적은 초저연비 자동차가 요구되고 있다. 이번 학술강연에서는 이러한 요구에 대응할 수 있는 ULEV(Ultra Low Emission Vehicle) 후보와 초저연비 자동차기술에 대하여 언급하고자 한다.

This study is on the early historical background and the process of development of modern architecture in Thai, during the period from 1782(King Rama 1) to 1934(King Rama 7). Thai started tn form a connection with western nations from the late 18C, founded the Bangkok Dynasty. Since then, Thai was increasingly influenced by western civilization and this trend included an increasing influence of western architecture. In this paper, the centeral objective is to observe the architectural change during the period from King Rama 1(1782-1809) to King Rama 7(1925-1934). This can be divided into three period. During the first period, from King Rama 1 to King Rama 3(1824-1851), Thai architecture showed a tendency to follow the preceding traditional example and to imitate Chinese architecture. The second period is from King Rama 4(1851-1868) to King Rama 5(1868-1910). During this period, Thai architectural design was increasingly influenced by western concepts, specially European Neo-classicism Style. During the third period, from King Rama 6(1910-1925) to King Rama 7(1925-1934), Thu had been enjoying extensive commerce with western nations. The great developments in the field of architecture during this reign were apparent in the construction of public utilities and facilities. These buildings were designed by western architects. At this time, modern architectural concept of western was introduced.

The productivity and utilization of four different grasdlegume pastures for grazing management were examined. The pasture mixtures used in this study were orchardgrass + ladino clover (Tl), orchardgrass + alfalfa (T2), perennial ryegrass + alfalfa (T3), a