우리는 CFHT에 부착된 OASIS 분광기, MR 1 그리즘으로 관측한 방출선 중, Hβ와 [O III] 5007 방출선을 분 석하여, 제 2형 세이퍼트 은하 Mrk 1의 운동학적 특성을 파악하였다. [O III] 금지선의 가우시안 선 윤곽 분석을 통해 초과하는 청색 이동 성분의 방출 영역이 비대칭적으로 보이는데, (1) 은하 중심부 약 960 pc거리에서 플럭스는 최대를 보이고, (2) 은하 중심부에서 NS 방향으로 ~900 km s−1인 큰 선폭 지역이 있음을 확인하였다. 두 원소의 분광 영상에서 보이는 시선 속도의 특징은 NE 방향에서 접근하는 가스의 흐름이, SW 방향으로 적색 이동, 즉 멀어지는 가스의 흐름 이 나타나 반시계 방향 은하의 회전 경향성을 보여준다. 시선 속도 자료로부터 은하 중심은 우리를 향해 접근하는 먼 지 가스가 가리고 있음을 파악하였다.

Cerium oxide decorated on nickel hydroxide anchored on reduced graphene oxide (Ce-Ni(OH)2/rGO) composite with hexagonal structures were synthesized by facile hydrothermal method. Fourier transform infrared spectroscopy (FT-IR), highresolution transmission electron microscopy with selected area diffraction (HRTEM-SAED), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Brunauer– Emmett–Teller (BET) surface area analysis and electrochemical technology were used to characterize the composite. Due to its unique two-dimensional structures and synergistic effect among Ce2O3, Ni(OH)2 and rGO components indicated twodimensional hexagonal nano Ce-Ni(OH)2/rGO composite is promising electrode material for improved electrochemical H2O2 sensing application. From 50 to 800 μM, the H2O2 concentration was linearly proportional to the oxidation current, with a lower detection of limit of 10.5 μM (S/N = 3). The sensor has a higher sensitivity of 0.625 μA μM−1 cm− 2. In addition, the sensor demonstrated high selectivity, repeatability and stability. These findings proved the viability of the synthetic method and the potential of the composites as a H2O2 sensing option.

Magnesium hydroxide sulfate hydrate (MHSH) whiskers were synthesized via a hydrothermal reaction by using MgO as the reactant as well as the acid solution. The effects of the H2SO4 amount and reaction time at the same temperature were studied. In general, MHSH whiskers were prepared using MgSO4 in aqueous ammonia. In this work, to reduce the formation of impurities and increase the purity of MHSH, we employed a synthesis technique that did not require the addition of a basic solution. Furthermore, the pH value, which was controlled by the H2SO4 amount, acted as an important factor for the formation of high-purity MHSH. MgO was used as the raw material because it easily reacts in water and forms Mg+ and MgOH+ ions that bind with SO4 2- ions to produce MHSH. Their morphologies and structures were determined using X-ray diffraction (XRD) and scanning electron microscopy (SEM).

This study was conducted to evaluate the degradation and mineralization of PPCPs (Pharmaceuticals and Personal Care Products) using a CBD(Collimated Beam Device) of UV/H2O2 advanced oxidation process. The decomposition rate of each substance was regarded as the first reaction rate to the ultraviolet irradiation dose. The decomposition rate constants for PPCPs were determined by the concentration of hydrogen peroxide and ultraviolet irradiation intensity. If the decomposition rate constant is large, the PPCPs concentration decreases rapidly. According to the decomposition rate constant, chlortetracycline and sulfamethoxazole are expected to be sufficiently removed by UV irradiation only without the addition of hydrogen peroxide. In the case of carbamazepine, however, very high UV dose was required in the absence of hydrogen peroxide. Other PPCPs required an appropriate concentration of hydrogen peroxide and ultraviolet irradiation intensity. The UV dose required to remove 90% of each PPCPs using the degradation rate constant can be calculated according to the concentration of hydrogen peroxide in each sample. Using this reaction rate, the optimum UV dose and hydrogen peroxide concentration for achieving the target removal rate can be obtained by the target PPCPs and water properties. It can be a necessary data to establish design and operating conditions such as UV lamp type, quantity and hydrogen peroxide concentration depending on the residence time for the most economical operation.

후춧가루에 존재하는 식중독 균을 저감화시키기 위한 방법으로 UV-C와 mild heat를 병합 처리 가능성을 타진하였다. Escherichia coli O157:H7 (ATCC 35150)와 Salmonella Typhimurium (ATCC 19585)를 후춧가루에 각각 106, 107 CFU/g 수준으로 인위접종하여 2.32 W/cm2의 UV-C와 60℃ 의 mild heat을 10분에서 70분 동안 처리하였다. 그 후 미생물 분석 및 후춧가루의 품질변화를 측정하였다. UV-C를 단독으로 70분 동안 처리했을 때 E. coli O157:H7과 S. Typhimurium는 각각 1.89, 2.24 log CFU/g 수준으로 감소하였지만, UV-C와 mild heat을 70분 동안 병합처리 했을 때는 각각 2.46, 5.70 log CFU/g으로 감소하였다. E. coli O157:H7 보다는 S. Typhimurium의 저감효과가 더 컸다. 색도는 모든 처리구에서 유의적인 차이가 없는 것으로 나타났다. 따라서 UV-C와 mild heat 병합처리는 후춧가루에 존재하는 식중독 균을 사멸시키는 데 효과적이기 때문에 산업적인 살균처리 기술로 활용될 수 있을 것으로 판단되었다.

Enterohemorrhagic Escherichia coli (EHEC) O157:H7 is a food-borne bacterial pathogen that causes various diseases in both humans and animals such as hemorrhagic colitis and hemolytic uremic syndrome. Because cattle are the main reservoir of this microorganism, undercooked meat and meat byproducts contaminated with EHEC O157:H7 are most commonly associated with epidemic disease outbreaks. As an enteric pathogen, EHEC O157:H7 enters the body via a fecal-oral route and must survive passage through the gastric stomach at pH 1.5 to 3.5 to establish an infection within the gastrointestinal tracts. Therefore, the ability to resist such acidic environments is important to the pathogenesis of EHEC O157:H7 during a host infection. In this review, we will discuss on the acid resistance (AR) mechanisms induced by EHEC O157:H7 when E. coli encounters acidic environments.