A lead-free bulk ceramic having a chemical formula Ba0.8Ca0.2(Ti0.8Zr0.1Ce0.1)O3 (further termed as BCTZCO) is synthesized using mixed oxide route. The structural, dielectric, impedance, and conductivity properties, as well as the modulus of the synthesized sample are discussed in the present work. Analysis of X-ray diffraction data obtained at room temperature reveals the existence of some impurity phases. The natural surface morphology shows close packing of grains with few voids. Attempts have been made to study the (a) effect of microstructures containing grains, grain boundaries, and electrodes on impedance and capacitive characteristics, (b) relationship between properties and crystal structure, and (c) nature of the relaxation mechanism of the prepared samples. The relationship between the structure and physical properties is established. The frequency and temperature dependence of the dielectric properties reveal that this complex system has a high dielectric constant and low tangent loss. An analysis of impedance and related parameters illuminates the contributions of grains. The activation energy is determined for only the high temperature region in the temperature dependent AC conductivity graph. Deviation from the Debye behavior is seen in the Nyquist plot at different temperatures. The relaxation mechanism and the electrical transport properties in the sample are investigated with the help of various spectroscopic (i.e., dielectric, modulus, and impedance) techniques. This lead free sample will serve as a base for device engineering.

There are several manufacturing techniques for developing thermionic cathodes for vacuum ultraviolet(VUV) ionizers. The triple alkaline earth metal emitters(Ca-Sr-Ba) are formulated as efficient and reliable thermo-electron sources with a great many different compositions for the ionizing devices. We prepare two basic suspensions with different compositions: calcium, strontium and barium. After evaluating the electron-emitting performance for europium, gadolinium, and yttrium-based cathodes mixed with these suspensions, we selected the yttrium for its better performance. Next, another transition metal indium and a lanthanide metal neodymium salt is introduced to two base emitters. These final composite metal emitters are coated on the tungsten filament and then activated to the oxide cathodes by an intentionally programmed calcination process under an ultra-high vacuum(~10-6 torr). The performance of electron emission of the cathodes is characterized by their anode currents with respect to the addition of each element, In and Nd, and their concentration of cathodes. Compared to both the base cathodes, the electron emission performance of the cathodes containing indium and neodymium decreases. The anode current of the Nd cathode is more markedly degraded than that with In.

원자력발전소 해체과정에서 방사화 재고량에 대한 평가는 방사선 환경에 정보를 제공함으로써 해체 계획을 수립하는데 중요한 정보를 제공한다. 원자로 운전 정지 후 원자로 및 관계시설에서의 축적된 방사능은 노심 구조물, 반사체 및 차폐체 등의 구조재가 중성자 조사에 의해 방사화된것이다. 방사화생성물 중 36Cl 과 41Ca 은 반감기와 화학적 물리학적 특성에 의해 해체 처 분 관점에서 매우 중요한 핵종이며 이에 따라 본 연구에서는 차폐 콘크리트 내 생성량을 평가하였다. MCNPX 코드를 사용하여 중성자속과 반응단면적을 계산하였으며 이 결과를 토대로 ORIGEN2 코드를 사용하여 방사화생성물의 양을 평가하였다.

Lead free (Ba0.7Ca0.3) TiO3 thick films with nano-sized grains are prepared using an aerosol deposition (AD) method at room temperature. The crystallinity of the AD thick films is enhanced by a post annealing process. Contrary to the sharp phase transition of bulk ceramics that has been reported, AD films show broad phase transition behaviors due to the nanosized grains. The polarization-electric hysteresis loop of annealed AD film shows ferroelectric behaviors. With an increase in annealing temperature, the saturation polarization increases because of an increase in crystallinity. However, the remnant polarization and cohesive field are not affected by the annealing temperature. BCT AD thick films annealed at 700 ℃/2h have an energy density of 1.84 J/cm3 and a charge-discharge efficiency of 69.9%, which is much higher than those of bulk ceramic with the same composition. The higher energy storage properties are likely due to the increase in the breakdown field from a large number of grain boundaries of nano-sized grains.

Recently chronic inflammation is focused on the association with cancer progression and acquisition of aggressive biologic behaviors, such as invasion, metastasis, and resistance to chemotherapeutic reagents. Due to the close vicinity within oral cavity, oral cancer may be intimately associated with chronic periodontitis. The present study was done to observe the effect of chronic periodontitis on oral cancer cells by utilizing P. gingivalis infection, a major pathogen in chronic periodontitis. We analyzed and compared the mRNA expression levels of epithelial-mesenchymal transition (EMT) markers in non-infected and P. gingivalis-infected oral cancer cells. Eighty-six genes, which are well known as EMT markers, were analyzed using commercially available EMT microarray plates, performed in triplicate. Among the 86 genes, the expression of 26 was increased (≥ 2 fold) by P. gingivalis, whereas that of 7 genes was decreased (≥ 2 fold). Our study suggests that P. gingivalis infection evokes significant changes in EMT-related genes. Further observations on molecular mechanisms underlying these changes may help to clarify the role of chronic periodontitis on cancer progression and to develop more efficient preventive and therapeutic modalities for oral cancer. (182 words)

하⋅폐수처리 MBR 공정을 운영함에 있어서 특정 오염물에 따른 멤브레인 회복률 저하를 자주 경험하게 되며, 이에 따른 화학세정 시 막오염 물질 제거에 필요한 약품선택에 많은 어려움을 겪는다. 본 연구의 목적은 하폐수 성상의 MBR 처리 시 발생할 수 있는 Ca 막오염에 대해서 다양한 세정약품 적용을 통한 멤브레인의 회복률 증대 방안을 찾고자 하는 것에 있다. 본 연구는 K 폐수처리시설에서 1년간 운영한 (주)에코니티의 분리막을 샘플링하여 투과도 측정 및 막표면 분석 후 막오염 물질을 우선적으로 확인하였으며, 이에 따른 각종 화학약품의 적용실험을 통하여 최적약품 도출 및 적용성을 평가하고자 하였다.

The steel pipe manufacturing industry deals with facilities and materials. Especially thermal facilities are close to vapor cloud explosion (VCE) and may cause secondary damage to facilities because they deal with corrosive substances such as hydrofluoric acid, sulfuric acid and acid, fire, explosion, leakage etc. It is in danger. In this study, hazard identification method was conducted using HAZOP techniques and quantitative risk analysis was conducted using e-CA, a program that supports accident impact analysis. Equipment in the influence range of ERPG - 3 was determined to be a facility requiring replacement. It was decided that neutralization is necessary using slaked lime. Based on the cost of loss, We presented the proper replacement which is the timing of the dangerous facility. As a result, It was ideal to replace the facilities with 20 years of heat treatment facilities, one year of hydrofluoric acid storage tank, 20 years of sulfuric acid storage tank, and 5 years of hydrochloric acid storage tank.

Ca3MgSi2O8:Eu2+(x = 0.003, 0.005, 0.007, 0.01, 0.03 mol) white phosphors for Light Emitting Diodes(LED) are synthesized with different concentrations of Eu2+ ions using a solid state reaction method. The crystal structures, surface and optical properties of the phosphors are investigated using X-Ray Diffraction(XRD), Scanning Electron Microscope(SEM) and photoluminescence(PL). The X-Ray Diffraction results reveals that the crystal structure of the Ca3MgSi2O8:Eu2+ is a monoclinic system. The particle size of Ca3MgSi2O8:Eu2+ white phosphors is about 1~5 μm, as confirmed by SEM images. The maximum emission spectra of the phosphors are observed at 0.01 mol Eu2+ concentration. The decrease in PL intensity in the Ca3MgSi2O8:Eu2+ white phosphors with Eu2+ concentration is interpreted by concentration quenching. The International Commission on Illumination(CIE) coordinate of 0.01 mol Eu doped Ca3MgSi2O8 is X = 0.2136, Y = 0.3771.

The O2 and CO2 concentrations in controlled atmosphere (CA) rooms are determined by the respiration of produce like apples and the airtightness of the CA room, with gas in the CA room controlled by O2 and CO2 removal as well as respiration (CO2 increase and O2 decrease). The purpose of this study was to evaluate the validity of the gas exchange model for O2 removal, CO2 removal, the rate of O2 decrease and CO2 increase by respiration of apples, and airtightness of the CA room. It took 17.5 hours to reduce O2 concentration from 20.9% to 2.0% after loading 4.3 tons of Fuji apples into the CA room, which was 4.2 hours longer than the 13.3 hours of the model formula. After the CO2 concentration rose to 0.5% due to respiration, it took 4.7 hours to lower the CO2 concentration to 0.2%, which was 0.6 hours longer than that of the model equation. The rate of CO2 increase by respiration was 0.021%/ h, which was similar to the model equation (0.017%/h). Also after 4.7 hours, the O2 concentration decreased by 0.1% which was also in line with the model equation (0.13%/h).

Lithium-ion batteries have been considered the most important devices to power mobile or small-sized devices due to their high energy density. LixCoO2 has been studied as a cathode material for the Li-ion battery. However, the limitation of its capacity impedes the development of high capacity cathode materials with Ni, Mn, etc. in them. The substitution of Mn and Ni for Co leads to the formation of solid solution phase LiNixMnyCo1-x-yO2 (NMC, both x and y < 1), which shows better battery performance than unsubstituted LiCoO2. However, despite a high discharge capacity in the Ni-rich compound (Ni > 0.8 in the metal site), poor cycle retention capability still remains to be overcome. In this study, aiming to improve the stability of the physical and chemical bonding, we investigate the stabilization effect of Ca in the Ni-rich layered compound Li(Ni0.83Co0.12Mn0.05)O2, and then Ca is added to the modified secondary particles to lower the degree of cationic mixing of the final particles. For the optimization of the final grains added with Ca, the Ca content (x = 0, 2.5, 5.0, 10.0 at.%) versus Li is analyzed.

This study was conducted to propose the conditions of controlled atmosphere (CA) storage suitable for the storage of winter Chinese cabbage and to investigate the maximum storage period of Chinese cabbage based on the results of the quality analysis for CA storage. The weight loss rate of Chinese cabbage stored at 194 days in low temperature storage was about 2 times higher than that in CA storage. The trimming loss rate of Chinese cabbage stored at low temperature was 1.5 times higher than that of CA storage after 83 days of storage. Bolting of Chinese cabbage was observed in only low temperature storage. The Chinese cabbage firmness of CA storage was not different in the range of 5.7-6.2 N, while low temperature storage gradually increased after 83 days of storage and was 7.5 N at 194 days. The incidence of mold occurred after 83 days in low temperature storage, while in CA storage it occurred after 153 days. In the quality evaluation, CA storage for Chinese cabbage was rated 1.5-1.9 points higher than the low temperature storage. The maximum storage period of Chinese cabbage at low temperature storage was 83 days and that at CA storage 153 days.

Weight loss that influences quality and farmer incomes is affected by the storage environment of agricultural products. The interior of storage should be maintained at high humidity to prevent the weight loss of products which contain a lot of moisture. The research had constantly proceeded with change in the heat exchanger surface areas, humidity systems, and weight loss forecast to maintain high humidity within storage. Relative humidity that exerts an effect weight loss of crop is influenced by storage temperature, leak state, and volume of product. When weight loss is predicted, different conditions of these factors are derived. In case of CA storage, ways of forecasting the weight loss become easier compared to cold storage due to sealed storage with external environment during storage period. In this study, apples were stored in purge-type CA storage and weight loss has been predicted by using operating characteristics and environmental conditions. As a result, humidity variation in the storage fluctuates with the operation of the unit-cooler. Furthermore, unit-cooler operation factor is influenced by outside temperature and respiration heat. Prediction value of weight loss according to temperature and humidity has been most accurately predicted. Prediction value through defrosting water measured shows unit-cooler work quality. K-value needs verification to calculate the VPD method.