This is to show some basic data for introducing both circulated aggregate and recycled powder producing waste concrete. Standard-mixing design for 24MPa has been basically used and added and replaced normal aggregate with recycled powder made of waste concrete. In addition, polycarboxylate high-range water reducing agent has been used because recycled powder is missing adhesive strength and it is not compare with cement's adhesive strength. Compressive strength with powder mixture of 2%, 4%, 6%, 8%, and 10% has been decreased down to 80% of normal concrete material strength without recycled powder mixture. 200℃, 400℃ and 600℃ heated concrete were compressively tested in order to find out concrete strength resistant to high temperature. heat capacity was also tested, based on the expectancy of its low conductivity. In addition, thermal conduction test was tested in order to find out concrete insulation. According to this test, when concrete was tested by fire resistance, it using the circulation aggregate was same resulted by concrete using the natural aggregate. also, recycle powder was not effecting insulation performance. but it is fit to standard on concrete insulation of building law.

Based on the known results of the expected busy periods for the triadic Min (N, T, D) and Max (N, T, D) operating policies applied to a controllable M/G/1 queueing model, a relation between them is constructed. Such relation is represented in terms of the

Risk level for each construction work can be very important factors to establish advanced prevention measures. But it is important how to produce it. There are three different methods to set it up for construction situation. They are as follows; 1) occurrence frequency = the number of accident workers of each work kind / yearly accident workers 2) occurrence frequency = the number of accident workers of each work kind / yearly workers 3) occurrence frequency = the number of accident workers of each work kind / the total workers All these three concepts(=averaged concept)are analyzed. Additionally frequency based on discrete curve, and severity based on continuous curve are also combined for producing risk level with more scientific approach. This risk level can be very useful to make prevention plan or take measures at construction sites. This is study result can change existing risk level concept to new concept of it, namely rail way work and in-water work showed be high risk level and RC work be low risk level, different from the situation which we have thought commonly, so far.

Establishing a framework, to explain the path to safety accidents considering major safety management factors such as physical conditions including on-site activities and workplace, as well as human factors as to labor, supervisors, or managers, would be effective as the basis to control project's risks by preventing disasters. Therefore, this study aimed to clarify the mechanism in safety management and disaster occurrence. In order to accomplish the purpose, it identified and classified the factors related to accidents, reviewed the causal relationships among them, and suggested the influence diagram. The results of this research are expected to contribute to reinforcing the preventive management, and facilitating the development of integrated site control system based on safety risks.

본 논문은 골재부착력(aggregate retention) 평가를 통해서 칩실(chip seal)에서 사용되는 롤러 종류의 기초적인 연구 결과를 설명하고 있다. 입도 78M의 화강암 골재와 CRS-2 이멀젼(emulsion)을 사용하여 single layer 칩실 테스트 구간을 시공하였으며, 3개의 다른 롤러 종류를 사용하였다. 사용된 롤러 종류는 pneumatic tire roller, steel wheel roller, and combination roller를 사용하였다. 세 종류의 롤러의 성능을 효과적으로 연구하기 위해서는 시공현장으로부터 직접 테스트용 시편을 얻는 것이 매우 중요하기 때문에, 노스캐롤라이나 주, Bailey에 있는 New Sandy Hill Church Road에서 테스트 구간 설정하고 일반적인 노스캐롤라이나 주의 칩실시공 절차에 준하여 시공을 실시하였다. 테스트 구간에서 제작된 시편들을 실험실로 옮겨서 골재부착력(aggregate retention) 성능평가를 실시하였다. 골재의 부착력을 평가하기 위해서 flip-over test(FOT), Vialit test, and the third-scale Model Mobile Loading Simulator (MMLS3) 시험방법들을 채택하였다. 세 가지의 시험결과들과 시험시공 현장에서 관측된 육안조사를 통해서 다음과 같은 롤러 종류와 순서를 추천하게 되었다. pneumatic tire roller 와 combination roller를 함께 사용하며 처음에 pneumatic tire roller가 다짐을 한 뒤에 그 뒤를 combination roller가 다짐하는 순서로 다짐작업을 함으로써 칩실의 성능이 향상 되리라 사료된다.

The small and medium construction companies are facing potential EHS(Environment, Health & Safety) of major accidents to cause casualties or a financial loss and increasing social responsibility. So, they have to voluntarily accomplish the EHS management system rather than passively with regard to EHS regulation. In this study, the framework of integrated EHS management system is developed based on cloud computing, and construction companies are to materialize self-regulation EHS process of construction workplace and to standardize the total EHS business process using the developed system. The proposed system also provides risk analysis, education/control and continuous improvement for EHS tasks and users can easily access the system on the web at a low price through cloud computing service. Eventually, the integrated system contributes to the managerial improvement by minimizing economic and physical loss caused by construction accidents.

Since the 1970's, UNESCO and ICOMOS have adopted or emphasized on the principles of historic preservation. One of them is what to require a repair should not be repaired beyond the limits of the features and techniques which had been adopted in those days of establishment. On the premise, this paper is to examine the materials and technique of wall plaster work in the government building constructions in the Joseon dynasty. The result of this examination shall come up with a basic conformity in the case of repairing the building established in the late of Joseon dynasty. This paper is carried out for the proper repair and restoration of architectural cultural properties. Construction reports and other documents in those days are examined for the study. Following conclusions have been reached through the study. The materials and technique which applied to wall plaster work in those days were quite different from the present. The technique that was used to wall plaster of government buildings in those days was not a lime wall plaster, but sand coat one. The kinds of material for setting of the sand coat wall plaster had been revised with the change of the times or constructions. The main kinds of material were composed of sand, white clay, paper fiber, and cereal starch. However, the present materials were composed of sand, white clay. Therefore, the present materials and technique which applied to wall plaster work for the repair and restoration of architectural cultural properties have to be revised and corrected.

Analysis of benthic micro-invertebrate community structure from the Pyeonghwaui Dam was investigated from May 2006 to October 2008. Total taxa of benthic micro-invertebrates were 5 phylum, 8 class, 15 order, 44 family, and 97 species in 2006, and 5 phylum, 7 class, 15 order, 48 family, 103 species in 2008. Mean dominance index at St. 1 to St. 5 were 0.36, 038, 0.38, 0.21 and 0.29. Mean species diversity at St. 1 to St. 5 were 3.84, 3.34, 3.13, 4.84 and 4.28. Although the dominance index of Lentic area was higher than Lotic, but the diversity was lower than Lotic area.

The Purpose of this study was to comprehend the influence that worker's job stress caused by the distinct characteristics of construction work affect on construction management. Proven through previous studies of job stress measurement method, physical environment, job demands, job autonomy, interpersonal conflict are derived as typical factors. We analyzed causal relationships between the factors using structural equation modeling under the hypothesis that job stress have effect on the construction management. As a result, successful job stress management for construction management plan is proposed.

현재 실무에서 입체교차로 유형을 결정하기 위해서는 해당 도로의 계획 교통량, 지형, 공사비, 주변 입체교차로와의 간격 등을 근거로 해서 결정하고 있지만, 문제는 같은 입력조건을 갖고도 설계자의 주관적 판단이나 발주부서의 요구 사항 등에 따라 서로 다른 유형을 결정할 수 있다는 점이다. 본 연구에서는 도로 입체교차로 유형을 객관적으로 결정하여 입력조건이 같다면 항상 일정한 유형을 찾아내는 유형 선정 알고리즘을 개발했다. 이 과정에서 기존 국내에 존재하는 입체교차로의 형식을 조사했고, 그 결과, 정형화된 기본형식 10개를 선정했다. 그 후 각 형식을 연결로의 형태를 고려하여 표시할 수 있는 방안을 제시했다. 또한 각 입체교차로별로 도로 사용자 비용과 입체교차로 공사비를 고려하여 편익과 비용을 구체화하는 방안을 제시했다. 본 연구에서 제시한 입체교차로 유형 선정 방법론은 일관성 있게 입체교차로 형식을 결정해 주는 것으로 분석되었고, 이 결과는 향후 도로 설계 실무자들이 입체교차로 형식을 선정하는 과정에 큰 도움이 될 것이다.

A new Bacillus thuringiensis isolate 19-22 (Bt 19-22) exhibited high anti-fungal activity against barley powdery mildew (Blumeria graminis f. sp. hordei). The cry gene content of Bt 19-22 comprised cry1Aa, cry1Ab, cry1Ac and cry1D which have high insecticidal activity against lepidopteran larvae. We tried to confer a dipteran insecticidal activity to Bt 19-22 for constructing a recombinant strain which has multiple functions, anti-fungal and dual insecticidal activity. The insecticidal cry11Aa gene of B. thuringiensis was constructed under cry1Ac promoter in an E. coli-B. thuringiensis shuttle vector (pPro11A). The plasmid, pPro11A was introduced into Bt 19-22 isolate by electroporation and four transformants which had different cry gene contents were identified by PCR with cry11Aa and cry1-type specific primers. Among them, a Bt 19-22 transformant (11A/19-22 No. 7) expressed Cry11A protein (approximately 70 kDa) successfully without change of its inherent characteristics such as Cry protein expression and antifungal activity. The insecticidal activity of 11A/19-22 No. 7 was checked against Plutella xylostella and Culex pipiens. These results suggests that the recombinant strain shows dual insecticidal activity against lepidopteran and dipteran larvae as well as antifungal activity.

Risk level for each construction work can be very important factors to establish advanced preventionmeasures. But it is important how to produce it. There are three different methods to set it up for consturuction situation. They are as follows; 1) occurrence frequency = the number of accident workers of each work kind / yearly accident workers 2) occurrence frequency = the number of accident workers of each work kind / yearly workers 3) occurrence frequency = the number of accident workers of each work kind / the total workers All these three concepts(=averaged concept)are analyzed. Additionally frequency based on discrete curve, and severity based on continuous curve are also combined for producing risk level with more scientific approach. This risk level can be very useful to make prevention plan or take measures at construction sites. This is study result can change existing risk level concept to new concept of it, namely rail way work and in-water work showed be high risk level and RC work be low risk level, different from the situation which we have thought commonly, so far.