검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 135

        81.
        2016.09 KCI 등재 서비스 종료(열람 제한)
        최근 구조물의 대형화에 따른 큰 지지력의 말뚝에 대한 수요가 증가하는 추세이다. 이에 따라 기성 PHC말뚝의 경우에도 700~1,200 mm 범위의 대구경 말뚝에 대한 활용이 증가하고 있고 최근 국내 현장에 적용되고 있다. 이 연구에서는 대구경 PHC말뚝의 휨성능을 향상시키기 위 해 철근과 콘크리트로 보강하여 합성 PHC말뚝을 제작하였다. 휨강도 평가는 4등분점 제하실험을 통해 변위제어 방법으로 수행되었다. 휨실 험을 통해 LICPT 실험체 횡방향 철근의 변형률 분포를 분석한 결과 횡방향 철근의 배근은 전단균열의 진전과 균열폭 제어에 효과적인 것으로 나타났고, 복부전단균열 발생을 억제할 수 있었다. LICPT 실험체는 LICP 실험체 보다 휨강도가 약 1.08배, 중앙부 변위가 약 1.19배 증가하였 고, 횡방향 철근의 배근은 말뚝의 연성적인 휨거동 확보에 유리한 것으로 나타났다. 말뚝 제작시 사용되는 각각의 재료가 휨강도에 기여하는 수준을 층상화 단면 해석으로 계산된 축강도-휨모멘트 상관도를 통해 평가하였다. 기성 PHC말뚝과 LICP 실험체의 실제 휨강도를 1.13배, 1.16 배의 안전율로 예측할 수 있었다.
        82.
        2016.04 서비스 종료(열람 제한)
        This paper was examined the flexural performance of HPFRCC according to spraying stage. Through this, it will be utilized as basic research data for development of sprayed HPFRCC for protection and blast resistance of existing structures.
        83.
        2016.04 서비스 종료(열람 제한)
        The flexural capacity of concrete beams with high compressive strength of 80 MPa is described. This study aims to investigate the structural behavior of concrete beams such as crack patterns, failure mode, load-deflection relationship, moment-curvature relationship and strains in concrete.
        84.
        2016.04 서비스 종료(열람 제한)
        In this study, the flexural tests were performed to investigate the flexural performance of prestressed hybrid wide flange (PHWF) beams. The main test variable was the shear stud on the top steel flange for composite action with the topping slab. All the specimens had the flexural strengths exceeding their design strengths. The test results also indicate that the PHWF beams had experienced fully composite behavior with high ductility, regardless of the existence of shear studs.
        85.
        2016.01 KCI 등재 서비스 종료(열람 제한)
        본 연구에서는 요철형 이음단면을 갖는 프리캐스트 교량 바닥판 이음부의 정적 휨성능을 예측하기 위한 비선형 유한요소해석 모델 을 구성하였으며, 선행연구에 의한 실험결과와의 비교를 통해 유한요소해석의 적합성을 확인하였다. 유한요소해석 모델을 구성하는 재료특 성으로 각각의 이론을 적용하였으며, 실험결과 및 사전 변수해석을 통해 입력변수들을 결정하여 유한요소해석 모델을 구성하였다. 본 연구에 서 수행된 유한요소해석 결과는 각각의 실험체에 대한 구조적 거동을 평균 5% 이내로 비교적 정확하게 추정하는 것으로 나타났으며, 소성 변 형률 분포로부터 각 실험체의 균열양상 및 파괴형태를 간접적으로 예측할 수 있었다. 따라서 본 연구에서 사용된 유한요소해석 모델은 향후 프 리캐스트 바닥판 이음부의 극한거동 예측 및 이음부의 설계식 도출을 위한 변수해석 연구 등에 효과적으로 활용될 수 있을 것으로 판단된다.
        86.
        2016.01 KCI 등재 서비스 종료(열람 제한)
        본 논문에서는 UHPC 바닥판과 강재 거더를 이용하여 합성보를 구성할 때, UHPC 바닥판의 높은 강도와 강성으로 인하여 합성보 구성 시에 강재 거더의 상부 플랜지를 없앤 역T형 거더를 적용하고자 하였다. 그러나 현재까지 강재 복부에 설치되는 전단연결재에 대한 거동, 역T형 강거더 합성보의 휨거동 특성 등은 실험 및 이론적으로 평가된 적이 거의 없는 실정이다. 이를 위하여 UHPC 압축강도, 전단연결재 간격 및 바닥판 두께 등을 변수로 하는 역T형 거더와 UHPC바닥판 합성보 16개의 휨거동 실험결과를 근간으로 하여 실험결과와 UHPC의 인장연화 거동을 고려한 재료모델 해석결과를 비교하였다. 역해석에 의한 인장연화곡선에서 UHPC의 인장강도는 6.57 MPa(120MPa의 경우) 및 9.57 MPa(150MPa의 경우)를 나타내고 있으며, 전단연결재 간격이 좁을수록 실험결과와 해석결과가 명확하게 근접하는 겻으로 나타났으며, 바닥 판 두께가 두꺼우며 UHPC 압축강도가 작을수록 동일한 경향이나, 이 영향은 다소 작은 것으로 나타났다. 따라서 실험결과와 해석결과를 종합 적으로 비교하면, UHPC 합성보의 실험결과와 해석결과는 비교적 잘 일치하고 있으므로 재료 실험으로부터 산정된 인장연화곡선은 UHPC의 실제 거동을 합리적으로 반영한다고 판단된다.
        87.
        2015.10 서비스 종료(열람 제한)
        This paper concerns the flexural behavior of hybrid steel fiber-reinforced ultra high performance concrete (UHPC) beams. It presents experimental research results of hybrid steel fiber-reinforced UHPC with steel fiber content of 1.5% by volume and steel reinforcement ratio of less than 0.02. The comparison of moment-curvature curves of the numerical analysis results with the test results shows a resonable agreement.
        88.
        2015.10 서비스 종료(열람 제한)
        This paper is to evaluate the flexural characteristics of 180MPa Ultra High Performance Concrete and reinforcing steel. In this study, the bending test is performed to evaluate the flexural characteristics considering lap-splice length. The stability of the lap-splice length proposed the structural design codes are evaluated on load-displacement. The results confirmed that the ductility has increased when the lap-splice has increased.
        89.
        2015.10 서비스 종료(열람 제한)
        This paper is to evaluate the flexural characteristics of 180MPa Ultra High Performance Concrete and reinforcing steel. In this study, the bending test is performed to evaluate the flexural characteristics considering cover depth. The stability of the cover depth proposed the structural design codes are evaluated on load-displacement. The results confirmed that the ductility has increased when the cover depth has increased.
        90.
        2015.07 KCI 등재 서비스 종료(열람 제한)
        본 연구는 SIFCON 형태의 고성능 강섬유보강 시멘트 복합체의 섬유혼입률에 따른 휨실험을 수행하였고, 실험결과를 바탕으로 휨성능을 평가하였다. 슬러리를 충전하는 형태로 일반 섬유보강시멘트와 달리 높은 섬유혼입률을 확보할 수 있는 장점을 가지고 있다. 주요 실험변수는 섬유혼입률 8.0%, 7.5%, 7.0%, 6.5% 및 6.0% 이며, 각 변수에 대한 휨강도 및 휨인성 특성을 분석하였다. 그 결과, 높은 섬유혼입률로 인하여 초기균열 발생 이후에도 계속적으로 하중이 증가하였으며, 최대강도 이후 충분한 잔류강도를 확보하였다. 또한 최대 50MPa 수준의 높은 휨강도를 발현하였으며, 섬유혼입률에 따른 휨강도 및 휨인성은 비례하여 증가하는 경향으로 나타났다.
        91.
        2015.05 KCI 등재 서비스 종료(열람 제한)
        전 세계적으로 노후교량이 급증함에 따라 교량 신설 뿐만 아니라 교체 및 유지관리의 중요성이 강조되고 있다. 기존 교량의 교체 및 신 설에 주로 적용되고 있는 현장타설바닥판은 초기균열로 인한 품질저하 우려, 인건비 상승, 보수 및 교체의 어려움, 공기 증가 그리고 도심 지 교통체증으로 인한 간접비용 증가 등 여러 문제점을 내포하고 있다. 반면에 공장에서 사전 제작후 현장에서 조립되는 프리캐스트 바닥 판 공법은 공장제작으로 품질확보, 급속시공이 가능하므로 기존 현장타설 바닥판의 효과적인 대안으로 제시되고 있다. 이러한 프리캐스트 바닥판은 바닥판간 이음부가 균열 및 누수 등으로 가장 취약하므로 소요강도와 내구성을 확보할 수 있는 바닥판 간 이음부 연결기술이 중 요하다. 본 연구에서는 기존공법을 개선한 요철형 이음단면을 갖는 프리캐스트 교량 바닥판을 제안하고 이음형식별 요소실험을 통해 휨성 능을 비교 및 검증하였다.
        92.
        2015.04 서비스 종료(열람 제한)
        The objective of this study is to understand the flexural reinforcement effects of RC slab reinforced with HFRP plate. To this end, an experiment was conducted by fabricated five RC slabs with the variables such as the number of anchors, epoxy injection amount and position. The Strength formula calculation on the specimens, was calculated to apply the ACI 440.2R-08(10.2.10). The results of this study, the stiffness, strength and structural performance of reinforced specimens are appeared very high compared with non-reinforced specimen, so the flexural reinforcement effects were very good. And the flexural reinforcement effects depending on the number of anchors and epoxy injection method was confirmed to differ greatly. Additionally, it is possible to predict the required number of anchors to the structure through the strength formula calculation.
        93.
        2015.04 서비스 종료(열람 제한)
        This study was performed to analyze the flexural performance of large diameter PHC Pile reinforced with transveres and longitudinal rebar and in-filled concrete. From the flexural test result, it was found that the initial cracking strength and maximum flexural strength of composite PHC pile were approximately 400% and 345% higher than that of the conventional PHC pile.
        94.
        2015.04 서비스 종료(열람 제한)
        The protective cover system is needed for the safety and bearing capacity of underground cable pipe. This study evaluates the flexural capacity through the experimental study according to the several design variables for the protective covers.
        95.
        2015.04 서비스 종료(열람 제한)
        In this study, A preliminary research has been attempted by design and strength analysis on a series of precast ultra high-strength concrete slab systems in order to evaluate. To compare with conventional reinforced concrete slabs, current slab systems can improve serviceability and ultimate load capacities, crack control, and durability, so as to apply in long span, lightweight, and slender building slab systems.
        96.
        2015.04 서비스 종료(열람 제한)
        The changes in mechanical performance of steel beams are necessarily occurred by mechanical property degradation under fire exposure conditions. Therefore, in this paper, the residual stress, deflection and mechanical performance of H-section steel beams after exposure to fire were analyzed using ABAQUS.
        97.
        2015.04 서비스 종료(열람 제한)
        Recently, studies of eco-friendly construction materials have been increased. For this reason, this paper presents the material properties of steel fiber reinforced slag concrete. Direct shear, flexural, and CMOD tests were conducted to determine the shear and flexural contribution of steel fiber.
        98.
        2015.03 KCI 등재 서비스 종료(열람 제한)
        In this study, it was developed eco-friendly alkali-activated slag fiber reinforced concrete using ground granulated blast furnace slag, alkali activator (water glass, sodium hydroxides), and steel fiber. Eight reinforced concrete beam using alkali-activated slag concrete were constructed and tested under monotonic loading. The major variables were mixture ratio of alkali activator, mixed/without of steel fiber. Experimental programs were carried out to improve and evaluate the flexural performance of such test specimens, such as the load-displacement, the failure mode, the maximum load carrying capacity, and ductility capacity. All the specimens were modeled in scale-down size. The reinforced concrete beams using the eco-friendly alkali-activated slag fiber reinforced concrete was failed by the flexure or flexure-shear in general. In addition, the maximum strength increased with the adding the mol of sodium hydroxide, and the specimen reinforced the steel fiber showed the value of maximum strength which is increased by 15.8% through 25.9%. It is thought that eco-friendly alkali-activated slag fiber reinforced concrete can be used with construction material and product to replace normal concrete. If there is applied to structures such as precast concrete member and production of 2nd concrete product, it could be improved the productivity and reduction of construction duration etc.
        99.
        2015.02 서비스 종료(열람 제한)
        본 연구에서는 대공간 구조물에 보편적으로 사용되는 직접기초의 단점을 보완하기위해 PHC 파일기초와 철골기둥의 접합부에 대한 개발을 진행하였다. 기존의 제안된 접합부들이 플레이트를 이용하여 휨으로 인한 처짐을 막기 위해 해당 부분에 과도한 보강이 필요한 것과는 달리, 개발된 반구형 접합부(HAT Joint)는 반구의 형상으로 인해 기둥에서 파일로 전달되는 하중이 축력으로만 작용하게 되어 휨에 대한 우려를 최소화 하였다. 또한 H형강용 기본 타입인 H-Type 외에도 각형, 원형, 왕형 철골기둥에 설치가 가능하도록 다양화 하였다. HAT Joint는 공장에서 상부 철골 기둥의 일부와 결합된 상태로 현장에 운반되어 PHC 파일과 볼트로 결합하게 되므로 공기 단축 및 시공품질 관리 향상에 큰 이점이 있다. 기둥과 기초파일의 접합부인 HAT Joint는 압축력과 휨에 대해서 성능이 검증되어야 한다. 압축력은 φ1000 PHC파일의 허용압축강도인 967ton의 1.5배인 1500ton을 충분히 만족하는 것을 실험을 통해 확인하였다. 본 연구에서는 시공 시의 현장상황 혹은 갑작스러운 지진 등 예상하지 못한 횡하중에 대한 안정성을 검토하기 위하여 휨 실험을 통해 성능을 검증하였다. 실험은 두 개의 PHC파일과 연결된 접합부의 철골 기둥을 연결하여 그 중심점을 가력하는 형태로 성능평가를 진행하였다. 이를 통해 개발한 접합부가 압축 성능뿐만 아니라 휨에 대한 성능도 만족하였음을 검증하고자 한다.
        100.
        2014.10 서비스 종료(열람 제한)
        This paper presents a half-precast composite concrete slab using a strain-hardening cementitious composites (SHCC). The flexural characteristics of SHCC-RC Composite slab was evaluated with a conventional reinforced concrete slab and the composite slab was excellent in crack control to compare with the reinforced concrete slab.
        1 2 3 4 5