As the competitiveness of SMEs (small and medium enterprises) is getting more and more improved and globalized, the government provides various consulting services to secure the competitiveness of small and medium firms and support stable growth. However, the assessment of the result from the government’s support is generally focused on non-financial factors, such as customer satisfaction and analysis of improvement effect. This paper is in regards to the statistical analysis of how much the government’s support in the form of providing consulting services contributes to financial outcomes in terms of profitability and growth. ROA (return on asset) and ROS (return on sales), which are investment profitability and sales profitability respectively, are chosen as an indicator of profitability. For analysis of growth, sales revenue and total asset growth are used. The samples are 44 corporations which are supported by government, and 150 corporations which are selected for comparison, with corporate growth support center program by the Ministry of Trade, Industry, and Energy chosen as the consulting model. After gathering the yearly balance sheets and income statements of the samples from CRETOP, Korea Enterprise Data, the analysis is conducted in the way of identifying the statistical significance of financial difference in the same period between corporates taking consulting services and corporates which have not, and the difference of financial outcomes from the corporates taking consulting services before and after consulting services. As a result, in terms of business growth, it is turned out to have positive difference both in growth ratio and profitability compared to the compared corporations at the significant level. Therefore, it is obvious that the consulting program which government provides to SMEs have direct influence practically to the corporates’ management performance.

본 연구는 ICT 분야 중소기업의 외부환경 민감도와 혁신활동에 대한 조직성향 이 기업성과에 미치는 영향요인에 대해 실증분석하였다. 분석방법으로는 첫째, 탐색적 요인 분석(Exploratory Factor Analysis)을 통해 투입된 변수간의 관계성과 패턴을 파악하였고 둘 째, 요인분석에 의해 축약된 영향 요인들을 유형화하는 군집분석(Cluster Analysis)을 실시 하였다. 마지막으로 유형화된 군집들의 혁신활동과 기업성과간 구조적 관계를 규명하고자 구조방정식모형(Structural Equation Modeling)을 이용하여 분석을 실시하였다. 본 연구는 국내 ICT분야 중소기업을 대상으로 실시한 E-연구원의 수요조사 결과 1,022부에 대해 실증 분석에 활용했다. 내⋅외부 환경에 대한 40개 투입변수에 대해 탐색적 요인분석을 실시한 결과, 총 7개의 요 인이 추출되었으며 7개의 요인을 기반으로 총 4개의 군집(n=1,022)이 형성되었다. 군집 4개 의 대해 구조방정식 모형을 활용하여 실증분석을 한 결과, 기술⋅경쟁 환경에 민감하며, 혁 신적인 조직 성향을 가진 군집1은 자체기술개발만이 기업성과에 긍정적 영향을 미치는 것으 로 나타났다. 시장 환경에 민감하며, 내부 협력적 조직 성향을 가진 군집2는 자체기술개발과 공동연구를 통해서만 기업성과에 긍정적 영향을 미치는 것으로 나타났다. 경쟁적인 환경에 민감하며, 혁신적이고 정부/관련기관과의 협력적 조직 성향을 가진 군집3은 공동연구 그리고 매개변수인 정부 지원 프로그램 활용을 통해 기업성과에 긍정적 영향을 미치는 것으로 나타 났으며, 기술도입은 기업성과에 부정적 영향을 미치는 것으로 나타났다. 개방적인 조직 성향 이 강한 군집4는 자체기술개발과 매개변수인 네트워크 활용 및 정부 지원 프로그램 활용이 기업성과에 긍정적 영향을 미치는 것으로 나타났다. 본 연구의 결과는 중소기업 혁신을 위한 전략 및 정책 수립에 유용하게 활용될 수 있을 것이다.

As the competitiveness of small and medium businesses is getting more and more improved and globalized, the government provides various consulting services to secure the competitiveness of small and medium firms and support stable growth. However, the assessment of the result from the government’s support is generally focused on non-financial factors, such as customer satisfaction afterwards and analysis of improvement effect. This paper is in regards to the analysis of how much the government’s support in the form of providing consulting services contributes to financial outcomes and to the analysis of the gap of performances among the types of consulting services. We verified the statistical significance of our hypothesis through SAS9.4 and SPSS 22, conducting comparative analysis of the business growth and profitability based on the yearly balance sheets and income statements of 44 corporations which government supports and 150 corporations which are for comparison. The data is gained from CRETOP, Korea Enterprise Data, and the testing model is chosen as the business of support center for corporate growth, which is a customized supporting business of the Ministry of Trade, Industry, and Energy. As a result, in terms of business growth, it turned out to have positive difference in growth ratio compared to the industrial average and compared corporations and to have significant difference in terms of profitability as well. Since, this paper shows that the different supporting ways have significant difference, we would say that this paper is meaningful in that it may propose a guidance for government to set strategies of government-supporting businesses.

Fuel consumption in fisheries is a primary concern due to environmental effects and costs to fishermen. Much research has been carried out to reduce the fuel consumption related to fishing operations. The fuel consumption of fishing gear in fishing operation is generally related to hydrodynamic resistance on the gear. This research is to propose a low drag generated midwater trawl in terms of the gear design improvement using simulations. The results from the simulation were verified with results that mirrored the model experiments. From the results, the resistance force of the proposed gear decreased to 29% compared to that of the current gear. Furthermore, the gear performance also improved with increased gear mouth compared to the current one. Therefore, the proposed gear will be helpful to reduce the greenhouse gases from fishing operation. It will also contribute to the fishing industry by saving fuel.

This study aims to analyze the performance of the beneficiaries of the SMEs(Small and Medium Enterprises) support project that has been handled online on the 'BizOK System', which is the integrated support system for SMEs in Incheon, by comparing before and after receiving support. Various performance indicators can be used, but this study used the rate of increase in sales, exports and employed manpower collected by the 'BizOK System'. Moreover, to analyze the trend of business performance by corporate feature, this study grouped the businesses into 7 categories including sales, business history, number of employees and capital. The results of this study are expected to be used in drawing implications for business support policies by utilizing them as basic data for enhancing efficiency of the support project and establishing corporate policies.

목적 : 로봇을 이용한 과제 기반의 로봇 상지재활 치료가 뇌졸중 환자의 상지 운동기능과 일상생활수행 (Activities of Daily Living; ADL)능력에 어떤 효과가 있는지 체계적 고찰과 메타분석을 실시하여 검 증하고자 하였다. 연구방법 : 1980년부터 2015년 12월까지 발표된 국외 무작위 대조군 실험(Randomized Controlled Trial; RCT)연 구들 중에서 과제와 함께 이루어지는 상지 로봇 재활치료를 대상으로 분석을 실시했다. EMBASE, Ovid-Medline, PubMed, CINAHL, Cochran CENTRAL을 통해 문헌검색과 선별을 실시했고, Scottish Intercollegiate Guidelines Network (SIGN)으로 문헌의 질평가를 The Grading of Recommendations, Assessment, Development and Evaluation (GRADE)로 근거의 수준을 마련했다. Cochrane collaboration’s tool for assessing risk of bias로 편향을 측정하고 RevMan 5.3 소프트웨어로 메타분석을 실시했다. 개별 연구들의 대상자 수, 중재 전-후 평균값, 표준편차 등을 자료합성에 사용하였다. 결과 : 12편의 연구가 최종 선정되었고 실험군의 대상자수는 총 341명(남성 235명, 여성 106명), 연령은 60.50 ± 5.51세의 분포를 보였다. 대조군의 경우 대상자수가 모두 301명(남성 207명, 여성 94명)이었고 58.55 ± 17.1세의 연령대를 보였다. 운동기능 전체의 효과크기는 2.63, Fugl-Meyer Motor Assessment (FMA)가 2.98, Box and Block Test가 2.25로 기능증진에 효과가 있었고, ADL 수행능력에서는 기능적 독립성 측정 (Functional Independence Measure; FIM)의 3.04을 제외하고 효과가 없었다. 결론 : 과제기반의 로봇상지재활치료는 뇌졸중 환자의 상지 운동기능과 ADL 수행능력에 전반적인 효과를 줄 수 있다. 장기적인 관점에서 로봇을 이용한 상지재활치료의 효과여부의 확인을 위해 임상 평가의 점 수나 등급으로 산출되는 결과변수에 대한 세밀한 추가 연구가 필요하다.

This study investigated the effects of 27.12 MHz radio frequency (RF) heating on heat transfer phenomena during the thawing process of frozen food. To determine the velocity of the RF thawing machine, samples were frozen at -80oC and subjected to different power treatments. The phase change times (-5 to 0oC) of frozen radish were 30, 26, 13, and 8 min; those of pork sirloin were 38, 25, 11, and 5 min; those of rump were 23, 17, 11, and 6 min; those of chicken breast were 42, 29, 13, and 9 min; and those of tuna were 25, 23, 10, and 5 min at 50, 100, 200, and 400 W, respectively. The heating limit temperatures of the radish, pork sirloin, rump, chicken breast, and tuna samples were 19.5, 9.2, 21.8, 8.8, and 16.8oC at 50 W; 23.5, 15.5, 27.3, 12.3, and 19oC at 100 W; 42, 26.9, 45.7, 22.1, and 39.4oC at 200 W; and 48.5, 54.7, 63.6, 57.3, and 44.9oC at 400 W. These results suggest that high-power RF improves thawing velocity and heating limit temperatures, and that an improvement on the operation of the RF thawing machine, according to food temperatures, is needed.

PURPOSES : This study mechanically analyzed the performance of road substructures with focus on infiltration trenches of pavement substructures. METHODS: Water contents and response times for precipitation of pavement substructures were investigated via sensors buried near the infiltration trench to measure water contents. RESULTS : The results of the water contents of pavement systems constructed with an infiltration trench yield levels that were slightly increased by approximately 2% compared to those measured from general pavement systems. This water content difference of 2% resulted in a decrease in service life of less than two years. CONCLUSIONS: Service life reduction due to an infiltration trench is minimal, particularly when the trench is installed with proper caution.

OBJECTIVES : Visibility at night can be improved by using retroreflection for short distances and phosphorescent line markings for long distances. In this study, we analyzed the characteristics of the phosphorescent line marking through a laboratory luminance test. Field performance analysis was performed through tests conducted on the road. We also examined the luminance measurement methods using the digital image obtained during the phosphorescent visibility evaluation. METHODS : In this study, the laboratory luminance test of the phosphorescent line marking was conducted using seven specimens to characterize the luminance changes according to the type of the glass beads, the thickness of the phosphorescent line marking, and the brightness and irradiation time of the light source. Phosphorescent and general line markings were made at 150 m to investigate the field luminance performance. A preliminary review of the luminance measurement methods was made using a digital image from a digital singlelens reflex (DSLR) camera. The measured luminance ratio of the general and the phosphorescent line markings was compared with the calculated luminance ratio using luminance analysis. RESULTS: Through the laboratory luminance test, it was seen that the change in luminance, which corresponds to the brightness of the light source, appears large but the influence of the thickness and irradiation time is low. The field performance test of the phosphorescent line marking conducted on the road involved measuring the luminance on the day the marking was made and 7 days after the marking was made. The luminance was found to be 190 mcd/m2 at 30 min after sunset and approximately 10-12 mcd/m2 4h after sunset. The results of the luminance test were captured using a digital image for each time group. The luminance ratio of the phosphorescent line marking, when compared to that of the general line marking, showed a similar trend within a 13% maximum error. Additionally, when this luminance ratio is compared to the direct field measurement, it could be confirmed that the luminance ratio, as captured in the digital image, showed a similar tendency. CONCLUSIONS : 1) The change in luminance corresponding to the brightness of the light source is significant in comparison with that corresponding to the thickness and the irradiation time. In addition, the results of the field test for the phosphorescent line marking satisfied the phosphorescent fire protection standard. 2) We examined the validity of the luminance measurement method using a digital image and we concluded that the change in the luminance ratio shows a similar tendency in both the cases. The results can form the basis for luminance measurement methodology for the construction and maintenance of phosphorescent line markings.

Recently damage of structures and loss of life by terrorism are internationally increasing. Among these terror that have a possibility to can happen in korea and that can caused lot of human life loss is the vehicle terror. To prevent the vehicle terror, the anti-ram barriers are needed. But domestic standard about anti-ram barriers are not clear. So, in this study, we will utilize and analyze the vehicle impact to evaluate the efficiency of the domestic bollard and suggest the installation standard of those. In Korea, granite, elastic, steel and stainless bollard are used. The performance of those bollard is not available. Elastic bollard couldn’t stop the vehicle, and the others just could stop the vehicle only at the speed under 10kph. Therefore, set the variable to reinforce, and evaluate the defence efficiency of bollard. As a result, granite and elastic bollard was not suitable for the anti-ram barriers. Performance of steel bollard increased as thickness grew. So steel bollard should must be thicker than 10T. And the concrete compressive strength effected insignificantly on the defence efficiency, so more than 24MPa compressive concrete be used. Performance of stainless bollard increased as thickness grew. So stainless bollard should must be thicker than 13T.

The effect of gasoline-ethanol blends on performance and NOx emission was investigated in a SI engine with port and direct fuel injection systems. The 1-D cycle simulation program of GT-Power was utilized to analyze the performance of thermodynamic cycle. The results showed that the brake torques are increased with the addition of ethanol to gasoline because of the improvements of volumetric efficiency. The engine with direct ethanol blends injection system has more power than that with port gaoline injection system, which is caused by the higher latent heat of ethanol.

국제지질자원인재개발센터는 지질자원 분야의 국내·외 인적자원개발을 목적으로 설립되었으며, 개원 이래 교육 훈련 목표 성과를 달성하며 운영되고 있다. 이 연구에서는 국제지질자원인재개발센터 성과의 객관성을 확인하기 위하여 교육인증과정 수료자를 대상으로 교육요구분석 및 교육훈련 과정 성과평가를 실시하였다. 교육요구분석을 위해 Borich 교육요구도와 Locus for Focus 방식을 활용하였다. 교육훈련 과정 성과평가는 성별, 연령별, 학력별, 수강구분에 따라 만족도 및 현업적용도 분석을 위해 설문조사 방식을 활용하였다. 연구결과, 지질학, 광물자원, 석유해저, 지구환경 분야 의 교육훈련 과정의 교육요구도가 도출되었으며, Locus for Focus 방식에 따라 교육과정 개발의 시급성을 판단하였다. 교육훈련 과정 성과평가 결과 광물자원, 지구환경 분야의 과정이 지질학 분야의 과정보다 학습성취에 대한 만족도가 높은 것으로 나타났다.

본 연구에서는 양파정식기의 정식시 개공기와 토양 간 상대속도를 최대한 0으로 근접시키기 위해 4절 링크-캠 기구를 갖는 정식시험장치를 제작하여 정식시험을 실시하고 최적 작업조건 및 형상을 구명하였 다. 시험조건은 모종나이 50일, 주간거리 130, 140, 150mm, 정식속도 45, 50, 55, 60No/min, 토양수 분함유량 10, 20, 30%, 토양 관수 후 경과 일 수 1, 2, 3, 4일로 하였다. 시험결과 정식률은 주간거리 140mm와 정식속도 50∼55No/min에서 100%로 가장 높게 나타났다. 식부자세는 사질양토에서 주간거리 140mm, 정식속도 50No/min일때 평균 11.2±13.9°로 가장 안정적인 자세로 정식하였고 개공폭은 38.2±1.9mm로 가장 작게 나타나 식부개공기 직경 34mm보다 4.2mm밀림이 나타났다. 최대하중평균은 정식속도 60No/min, 주간거리 150mm일때 45.1±5.1N로 나타났고, 최대정식동력은 124.2±11.8W로 나 타났다. 토양수분함유량은 30%일때 가장 낮았고, 관수 후 1일차가 가장 낮았다. 개선된 4절링크-캠 방 식 식부장치는 주간거리 140mm에 맞는 캠 형상을 갖게 함으로서 개공기-토양 상대속도가 0이 될 수 있었다. 따라서 본 양파정식기 식부장치는 필요 주간거리에 맞추어 상대속도 0의 캠 형상을 갖게 함으 로서 식부성능을 최대화할 수 있는 것으로 판단된다.

본 연구는 우리나라의 Holstein 능력검정 암소집단의 혈통자료를 이용하여 근교계수 및 혈통구조를 분석함으로써 Holstein 집단의 유전적 다양성 정도를 알아보고자 실시하였다. 2002년부터 2012년 사 이에 태어난 Holstein 400,029두에 대한 능력검정 자료 및 509,740두에 대한 혈통정보를 이용하여 분석하였다. 국내 지역별로 혈통완성도를 분석한 결과, 선조 3대까지의 조상을 알고 있는 개체의 비율 은 경기, 강원, 충남, 충북, 경북, 경남, 전남, 전북, 제주 및 우리나라 전체에 대해 각각 55.18, 23.49, 47.83, 53.62, 56.38, 51.35, 26.58, 49.41, 56.90 및 63.20%로 나타났다. 한편, 출생년도 별 평균근교계수는 2002년부터 2012년까지의 년도별 평균 및 전체에 대해 각각 0.43, 0.44, 0.58, 0.64, 0.78, 0.93, 1.08, 1.23, 1.46, 1.77, 2.03 및 0.93%로 추정되었다. 또한 아비에서 딸소까지 평균 세 대간격은 8.15년으로 나타났으며, 어미에서 딸소까지 평균 세대간격은 4.20년으로 나타났다. 근교계수 및 세대간격을 이용하여 추정한 국내 능력검정 젖소 집단의 유효집단크기는 2004, 2009 및 2012년에 대해 각각 56.5, 51.3 및 32.2두로 추정되어 시간이 지남에 따라 유효집단의 크기가 감소하는 것으로 추정되었다.

In this study, a quasi-static experiment was conducted on the connection performance between the integral abutment bridge and CFT pile. Six experiment specimen were manufactured and were divided into type A and type B. Experiment specimens of Type A were connected with bolts and experiment specimens of Type B were connected with hooks. In the experiment results the connection performance of Type B showed excellent performance more than that of Type A.

기업은 지속가능한 발전과 성과를 위하여 교육훈련투자를 지속적으로 수행하고 있다. 일부에서는 교육 훈련투자의 필요성과 효과에 대하여 의문을 제기하고 있다. 이러한 회의론은 교육훈련 투자의 효과를 부 정하지는 않으나, 기업이 인식하고 있듯이 그만큼의 효과를 내지 못하고 있을 수 있다는 문제를 제기하고 있다. 교육훈련투자의 실제적 효과를 추정하기 위하여서는 교육훈련투자와 기업성과간의 관계에 대하여 여러 가지 대안적 설명을 고려하고 이를 반영한 실증 분석 모형을 설정하고자 하였다. 따라서 본 연구는 패널 자료를 활용하여 실증 분석하고자 하며, 역인과관계 설명 등의 대안적 설명을 고려한 동태적 분석 모형을 설정하여, 교육훈련이 기업성과에 미치는 효과를 추정하였다. 동태적 패널 분석의 추정 결과는 다음과 같이 정리되어진다. 우선, 교육훈련은 조직성과인 일인당 매출 에 유의적인 정의 효과를 미치며, 그 크기는 0.05정도로 나타났다. 그 다음으로 교육훈련은 재무적 성과인 일인당 순이익에는 유의적인 영향을 미치지 않는 것으로 분석되었다. 이러한 동태적 패널 분석의 결과는단일연도만을 사용한 회귀분석 결과와는 효과의 크기 면에서나 유의도에서 많은 차이를 보이고 있다는 점 역시 발견하였다. 이러한 연구 결과를 바탕으로 연구의 시사점과 한계점 그리고 향후 연구방향이 논의 되었다.