검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 192

        141.
        2016.11 KCI 등재 서비스 종료(열람 제한)
        염해에 콘크리트 구조물의 내구수명 평가는 매우 중요한데, 결정론적 방법 및 확률론적 방법에서 평가된 결과는 큰 차이를 보이고 있다. 본 연구에서는 시간의존형 확산계수와 고정 확산계수를 고려하여 내구수명을 모사하였다. 기본확산계수, 콘크리트 피복두께, 표면염화 물량을 3조건으로 분류하여 각 평가방법에 따라 변화하는 내구적 파괴확률과 내구수명을 평가하였다. 시간의존형 확산계수의 도입을 통하여 두 방법 간의 차이를 감소시킬 수 있었으며, 합리적인 해석결과를 유도할 수 있었다. 염화물 확산계수가 2.5×10-12m2/sec에서 7.5×10-12m2/sec으 로 증가할 때 내구수명은 25.5~35.6%수준으로 감소하였으며, 피복두께가 75 mm에서 125 mm로 증가할 경우, 267~311%로 내구수명은 증가 하였다. 또한 표면염화물량이 5.0 kg/m3에서 15.0 kg/m3으로 변화할 때, 내구수명은 40.9~54.5% 수준으로 감소하였다. 피복두께의 변화에 따른 내구수명의 변화는 기본확산계수 및 표면염화물에 비하여 8~10배정도 크게 평가되었으며 내구수명 확보를 위한 중요한 인자임을 알 수 있다.
        143.
        2016.04 KCI 등재 서비스 종료(열람 제한)
        An insulating brick was developed and evaluated as a potential recycling Waste Limestone (WL) with Melting Slag (MS). We aimed at analyzing the parameters affecting the insulating brick manufacture to enhance the recyclability of WL. In this study, The thermal conductivity, compressive strength and apparent porosity of prepared brick were measured with the addition of aluminum dross and the molar ratio of the alkali activator. The thermal conductivity, compressive strength and apparent porosity were 0.28 W/mK, 2.41 MPa and 44.72% respectively at a mixing ratio of 9.5 : 0.5wt%, 1.5 M SiO2/Na2O, 3wt% aluminum dross. Thus, it met the standards of insulating fire bricks (KS L 3301).
        144.
        2016.04 KCI 등재 서비스 종료(열람 제한)
        급성전골수구성 백혈병(Acute promyelocytic leukemia, APL)은 혈액암의 일종으로 치료의 성적이 좋지 않 을 뿐 아니라 항암요법과 병행 하였을 경우 큰 효과를 보이는 것으로 알려져 있는 방사선 치료를 병행함에 도 불구하고 정상세포에도 작용하여 부작용을 초래한다. 본 연구에서는 이러한 부작용을 감소시키기 위하 여 감마선을 TNF-α와 같이 처리하였을 경우 정상세포와 암세포의 세포 죽음에 어떠한 영향을 미치는지 확 인하였다. HL-60 세포는 APL 세포주로서 사용하였고 DMSO를 처리하여 분화시킨 HL-60 세포는 정상과립 구의 성질을 나타내어 정상대조군으로 이용하였다. 그 결과 TNF-α와 함께 감마선을 처리한 HL-60 세포에 서만 세포독성효과를 나타내었고 세포자멸사를 유도하여 세포가 죽음에 이르게 하였다. 결론적으로 TNF-α 는 항암치료의 부작용을 없애기 위해 저농도 감마선 치료 시 함께 사용하여 암 세포의 제거를 증가시켜 암 의 치료효율을 높일 수 있는 유효물질로 사료된다.
        145.
        2015.12 KCI 등재 서비스 종료(열람 제한)
        In Korea, many drinking water treatment plants (DWTPs) have introduced and are going to introduce biological activated carbon (BAC) process to treated dissolved organic matter (DOM) in water which are difficult to control by conventional water treatment processes. Even though more decade have passed since introduced BAC in Korea, most of BAC operating method was followed to the modified sand filter operating manuals. In case of BAC backwashing, many DWTPs set the periods of backwashing about 3∼5 days. In this study, we have collected data to set the proper BAC backwashing periods from both pilot-plant and real DWTPs. We had measured heterotrophic plate count (HPC), turbidity, water temperature, dissolved organic carbon (DOC) and headloss from just after backwashing to the next backwashing time for two years. Considering water quality factors, the BAC run time from backwashing to the next backwashing could extend more 30 days without water quality deterioration if the head loss do not reach the limited level which depends on each BAC facilities’ condition. It means the BAC treated water could be saved in the proportion of extended the backwashing period to the existing backwashing period.
        146.
        2015.11 서비스 종료(열람 제한)
        국내에서 음식물쓰레기 종량제 제도가 전국으로 확산(‘12년)되고 음식물류 폐기물의 해양배출이 금지(‘13년)됨에 따라 음식물쓰레기 저감 및 에너지화 관련 기술의 수요가 증가되고 있고, 정부는 음식물류 폐기물의 처리 및 자원화 정책을 추진하고 있다. 기존 음식물쓰레기 분리수거의 불편함을 해소하기 위해 가정용 음식물감량건조기가 등장하였는데, 사용 시 전기소모량이 크고 악취가 발생하는 등의 문제가 대두되었다. 그 후, 새로운 음식물쓰레기 분리수거 자원화 시스템의 개발이 필요하게 됨에 따라 가정용 디스포저 사용에 대한 연구가 진행되고 있다. 디스포저는 주방 음식물쓰레기를 갈아서 배수설비를 통해 오수와 함께 공공하수도로 배출하는 기기를 의미하는데, 환경부고시에 의거 고형물 회수율이 80% (by wet wt.) 이상이 되지 않으면 디스포저의 판매 및 사용이 금지된다. 현재 고형물 회수율 수준은 60% (by wet wt.) 이하에 그치는 상황이기 때문에 회수율에 영향을 미치는 여러 인자들에 대해 연구하여 고형물 회수율을 높일 필요가 있다. 따라서 본 연구에서는 분쇄입경, 분쇄시간, 급수량을 회수율에 영향을 미치는 인자로 선정하였고, 영향 인자별 고형물 회수율을 분석해서 최적 조건을 찾아 디스포저 설계인자에 반영하고자 한다. 실험에서는 한국환경산업기술원에서 제시하고 있는 방법에 따라 표준음식물쓰레기를 제조하고, 회분식 디스포저(KD 132, National社, Japan)를 이용하여 각 분쇄시간(15, 30, 60, 90 s)과 급수량(2 , 4, 6, 8 L/min) 조건하에 디스포저 오수를 제조한다. 제조한 디스포저 오수는 6.70, 5.60, 4.00, 2.00, 1.00, 그리고 0.60 mm 6가지 크기의 체를 연속으로 설치하여 분리하고, 분리된 오수는 원심분리기(HANIL, New Supra 22K)를 이용하여 900 rpm 으로 고형물과 여액을 분리한다. 그리고 국내 폐기물공정시험법에 따라 삼성분 분석을 진행하고, 초기 음식물쓰레기 대비 회수된 고형물의 질량비를 통해 고형물 회수율을 결정한다. 추가적으로 각 영향인자에 대한 결과의 비교․분석을 통해 고형물 회수율에 대한 최적 조건을 선정하여 디스포저 설계 인자에 반영할 수 있을 것으로 사료된다.
        148.
        2015.04 서비스 종료(열람 제한)
        This study evaluated the lateral thermal deformation induced by environmental factors for a precast I-girder. Lateral temperature gradients across the cross-section of the girder were calculated using analytical equations based on daily solar radiation, temperature variation, and wind speed. Then the lateral thermal deformation showed an average of approximately 40% to 71% of the tolerance for the initial lateral deformation of the girder, defined in the PCI bridge design standard.
        149.
        2014.01 KCI 등재 서비스 종료(열람 제한)
        With the incorporation of hydrogen peroxide(H2O2) and NaLS as an initiator and emulsifier, acrylic acid monomer was graft copolymerized with sodium alginate prepared from alginic acid, and then the grafted copolymer was confirmed through IR spectrometer. When the amounts of acrylic acid increased the grafting also showed increasing trend. While the contents of hydrogen peroxide was varied in the aqueous sodium alginate solution, the grafting efficiency decreased gradually as the amounts of initiator increased.
        150.
        2013.11 서비스 종료(열람 제한)
        일반적으로 응집제중의 알루미늄과 지각에 존재하는 알루미늄이 함유된 정수슬러지를 산(acid)을 이용하여 추출한 알루미늄을 재생 응집제라고 지칭하고 있다. 그러나 이 재생 응집제에는 산을 이용하여 추출하기 때문에 중금속을 비롯한 인(phosphorus) 성분이 함유되어 하수처리장의 총인 처리시설에 이용하기에는 한계가 있을 것으로 추측되었지만, 전보(2013년 춘계학술발표회)에서 보고한 바와 같이 하수처리장의 총인처리에서 사용되고 있는 응집제의 대체 가능성이 있는 것으로 나타났다. 그러나 전보에서는 정수슬러지로부터의 알루미늄의 용출에 미치는 중요한 조건인 pH, 산의 종류, TS의 농도 등에 대한 검토가 이루어지지 않았다. 특히 전보에서는 염산을 이용하여 회수한 응집제를 이용하여 하수 중의인 제거에 대한 특성을 검토하였지만, 황산으로 추출했을 때 생성되는 황산반토와의 차이에 대해서도 검토되지 못하였다. 이에 본 연구에서는 전술한 알루미늄의 용출 조건과 황산과 염산으로 추출한 용액을 이용하여 하수중의 인(phosphorus) 제거 과정에서 나타는 특성을 쟈테스트를 통해 비교・검토하였다. 검토한 산의 종류에 상관에 없이 pH 2 이하의 조건에서 함유된 알루미늄의 대부분이 용출되었으며, TS 농도 120 g/L이상에서는 정수슬러지의 대부분이 suspension되지 못하는 것으로 나타났으며, 현탁액 중의 알루미늄의 농도도 급격하게 낮아지는 경향을 보였다. 한편 산의 종류에 있어서는 동일의 pH 조건에서도 염산으로 처리했을 때, 알루미늄의 농도가 약 20% 정도 높아지는 경향을 보였으며, 인(phosphorus)의 제거에 있어서도 황산으로 처리한 경우보다 효율이 10% 정도 높아지는 경향을 보였다. 이는 인(phosphorus)이 존재하는 조건하에서 염소를 이용하여 회수한 염화알루미늄과 황산을 이용하여 회수한 황산알루미늄을 각각 투입하게 되면 알루미늄에 대한 염소, 황산, 인(phosphorus)간의 선택성의 차이가 이와 같은 결과를 야기하게 된 것으로 생각된다. 따라서 저농도의 인이 존재하는 총인처리시설의 유입수에 대해서는 염산으로 추출한 염화알루미늄 형태의 재생 응집제가 유효할 가능성이 클 것으로 판단된다.
        151.
        2013.10 서비스 종료(열람 제한)
        A deterioration of typical reinforced concrete bridge deck is due to the use of calcium chloride, cracks and water penetration inside of the deck slab with steel reinforcement. Therefore, in order to eliminate the defects of reinforced-concrete decks in terms of material, the steel-straped deck system is studied and developed by maximizing the arching effect while the girders are restrained using straps in lateral direction to the bridge. This parametric study was performed to analyze the structural characteristics of steel-straped deck, and to identify the factors of the thickness, span length and lateral restraint stiffness of deck slab considering the concrete nonlinearity.
        152.
        2013.04 서비스 종료(열람 제한)
        레일마모는 열차의 주행안전 및 승차감에 미치는 영향이 크고, 소음․진동의 주요원인으로 작용한 다. 또한 레일마모가 발생할 경우 궤도구조의 파괴를 촉진시킴으로써 차량 및 궤도유지보수비를 크게 증가시킨다. 따라서 구간 특성 및 환경 영향 인자 등 현장에서 발생하는 마모 원인을 체계적으로 분석함으로써 마모를 저감할 수 있도록 차량운행 조건과 선로선형 및 궤도구조를 설계하는 것은 중요한 과제이다. 본 연구는 궤도의 성능 지표 선정을 위해 레일 마모 검측데이터간의 상관관계 분석을 수행하였으며, 마모 검측 데이터와 마모에 영향을 미칠 것으로 판단되는 주요 구간 특성 및 환경 영향인자를 바탕으로 CART(Classification Analysis of Regression Tree) 분석을 수행하였다..
        153.
        2012.01 KCI 등재 서비스 종료(열람 제한)
        일반적으로 교량의 하중저항능력인 내하력은 교량의 거동에 큰 영향을 줄 수 있는 심각한 손상, 결함, 재료적인 열화현상이 존재하지 않는다면 이론적인 방법으로 평가한 내하력보다 여유가 있다. 그러나 현재 내하력을 구하기위한 재하실험 및 구조해석 과정에서 이미 오차가 포함되어 있어 응답보정계수의 신뢰성이 떨어지고 있다. 이에 본 연구에서는 센서의 센싱 문제와 구조해석 모델의 적정성에 오차를 해결하기 위하여 센서부에서 기존의 전기저항식 변형률, 변위 센서의 문제점을 도출하여 성능이 우수한 스마트 센서인 광섬유 스마트 센서로의 변화를 추진하고자 한다. 또한, 다양한 구조해석 모델 해석을 통하여 최적의 적정 모델을 선정함으로서 응답보정계수의 정확성을 향상시키고자 하였다.
        154.
        2011.02 서비스 종료(열람 제한)
        강우로 인한 토양침식은 자연현상의 일부로 지형발달과정의 일부이다. 오늘날 증가하고 있는 인간의 개발 활동은 지표의 토양침식을 더욱 가속하고 유역의 토사유출재해를 증가시키는 원인이 되기도 한다. 특히 건설공사 중에는 대부분의 지표면이 나지로 변하기 때문에 강우에 의한 토양침식이 공사 전에 비하여 크게 증가한다. 따라서, 본 연구에서는 건설공사로 발생하는 나지사면의 토사유출량 조사를 위해 공사현장의 토양다짐 유무와 사면경사를 고려한 강우모의발생 토양침식 실험을 실시하고 토양침식에 대한 강우량, 사면경사, 토양다짐의 관계를 분석하였다. 사면경사와 강우량이 증가할수록 토사유출량은 증가하였다. 급경사 나지에서는 사면토양을 다지면 토사유출량이 감소하는 비율은 경사와 강우량이 클수록 증가하는 것으로 나타났다. 본 연구결과 건설공사가 진행하는 중에 적절한 사면관리를 통한 토사유출량 저감이 필요하며, 적절한 건설공사 지역에서 토사유출량을 줄이기 위한 사면관리에 사용될 수 있을 것으로 판단된다.
        155.
        2010.09 KCI 등재 서비스 종료(열람 제한)
        The purpose of this study is to degradation of Rhodamine B (RhB, dye) and N, N-Dimethyl-4-nitrosoaniline (RNO, indicator of the electro-generation of OH radical) in solution using boron doped diamond (BDD) electrode. The effects of applied current (0.2~1.0 A), electrolyte type (NaCl, KCl, and Na2SO4) and electrolyte concentration (0.5~3.0 g/L), solution pH (3~11) and air flow rate (0~4 L/min) were evaluated. Experimental results showed that RhB and RNO removal tendencies appeared with the almost similar thing, except of current. Optimum current for RhB degradation was 0.6 A, however, RNO degradations was increased with increase of applied current. The RhB and RNO degradation of Cl type electrolyte were higher than that of the sulfate type. The RhB and RNO degradation were increased with increase of NaCl concentration and optimum NaCl dosage was 2.5 g/L. The RhB and RNO concentrations were not influenced by pH under pH 7. Optimum air flow rate for the oxidants generation and RhB and RNO degradation were 2 L/min. Initial removal rate of electrolysis process was expressed Langmuir - Hinshelwood equation, which is used to express the initial removal rate of UV/TiO2 process.
        156.
        2010.06 KCI 등재 서비스 종료(열람 제한)
        이 연구는 제2형 당뇨 모델 동물인 Goto-Kakizaki(GK) 흰쥐를 사용하여 운동과 셀레늄 투여가 미토콘드리아 생성과 기능 향상을 조절하는 전사 인자의 발현 변화와 현상학적으로 당뇨의 증상 개선을 유도할 수 있는지를 구명하기 위해 실시하였다. 실험동물은 52주령된 GK 수컷 흰쥐로 24 m/min, 30 min/day, 5 days/week, 총 6주간 트레드밀 런닝을 실시하였다. Sodium selenite(5 umol/kg)는 selenium
        157.
        2010.04 KCI 등재 서비스 종료(열람 제한)
        The pressure drop through pulse air jet-type bag filter is one of the most important factors on the operating cost of bagfilter houses. In this study, the pilot-scale pulse air jet-type bag filter with about 6 ㎡ filtration area was designed and tested for investigating the effects of the four operating conditions on the total pressure drop, using the coke dust collected from a steel mill factory. When the face velocity is higher than 2 m/min, it is not applicable to on-spot due to the increase of power expenses resulting from a high-pressure drop, and thus, 1.5 m/min is considered to be reasonable. The regression analysis results show that the degree of effects of independent parameters is a order of face velocity > concentration > time > pressure. The results of SPSS answer tree analysis also reveal that the operation time affects the pressure drop greatly in case of 1 m/min of face velocity, while the inlet concentration affects the pressure drop in case of face velocity more than 1.5 m/min.
        158.
        2010.04 KCI 등재 서비스 종료(열람 제한)
        천연집단에 서식하는 개비자나무 개체들을 이용해 무생물 및 생물적 환경인자가homoharringtonine(HHT) 함량에 미치는 영향을 조사하여 향후 항암제 가능성이 있는 HHT의 고부가가치 산업적인 생산이 기대되는 연구에 기초자료를 제공하고자 본 연구를 수행하였다. 무생물적 환경인자(토양습도, 토양pH, 서식밀도, 기온)와 HHT 함량과의 상관관계에 있어 HHT 는 토양습도(0.77)와 토양pH(-0.68)에서 높은 상관을 보였다. 고도에 따른 무생물적 환경인자 (토양습도, 토양pH)와 HHT 의 함량 관계에 관해 다중회귀 분석을 실시한 결과, 토양 습도의 회귀계수(26.48***) 만 유의하여 토양 습도가 상대적으로 HHT 함량에 높은 영향을 미치는 것으로 나타났다. 생물적 환경인자(damage index)에 따른 HHT 함량에 미치는 영향을 살펴 본 결과, HHT는 2차곡선회귀적으로 증가하다 감소하는(H=278.23+1242D-398.87D2) 경향을 보였고 damage index는 HHT 함량에 높은 영향을 미치는 것으로 분석되었다. 마지막으로 HHT 의 함량에 영향을 미치는 최적환경인자를 분석한 결과, damage index와 토양 습도 모두가 2차다항회귀식으로 가장 적합하였고 결정계수는 각각 0.73와 0.67로 damage index가 상대적으로 HHT 함량에 높은 영향을 미치는 것으로 나타났다. 이는 섭식자 또는 균류와 같은 스트레스로 인한 방어기작이 HHT 의 생성에 높은 영향을 미치는 것으로 판단된다.
        159.
        2010.03 KCI 등재 서비스 종료(열람 제한)
        Actual evapotranspiration (AET) in the Suyeong-gu was estimated and correlations between AET and meteorological factors were analyzed. The study area was Suyeong-gu lay at the east longitude 129° 05′40″∼ 129° 08′08″ and north latitude 35° 07′59″∼ 35° 11′01″. The Kumryun mountain, the Bae mountain, the Suyeong river and the Suyeong bay are located on west, north, northeaster and south side in the study area, respectively. AET was estimated using precipitation (P), potential evapotranspiration (PET) and plant-available water coefficient. Meteorological factors to estimate PET were air temperature, dewpoint temperature, atmospheric pressure, duration of sunshine and mean wind speed (MWS). PET and AET were estimated by a method of Allen et al. (1998) and Zhang et al. (2001), respectively. PET was the highest value (564.45 mm/yr) in 2002 year, while it was the lowest value (449.95 mm/yr) in 2003 year. AET was estimated highest value (554.14 mm/yr) in 2002 year and lowest value (427.91 mm/yr) in 2003 year. Variations of PET and AET were similar. The linear regression function of AET as PET using monthly data was and coefficient of determination was high, 0.75. In order to analyze relationship between the evapotranspiration and meteorological factors, correlation analysis using monthly data were accomplished. Correlation coefficient of AET-PET was 0.96 high, but they of AET-P and PET-P were very low. Correlation coefficients of AET-MWS and PET-MWS were 0.67 and 0.73, respectively. Thus, correlation between evapotranspiration and MWS was the highest among meteorological factors in Suyong-gu. This means that meteorological factor to powerfully effect for the variation of evapotranspiration was MWS. The linear regression function of AET as MWS was and coefficient of determination was 0.54. The linear regression function of PET as MWS was and coefficient of determination was 0.45.
        160.
        2009.04 KCI 등재 서비스 종료(열람 제한)
        In this research, we measured the number of lanes, distance, disposition of apartment that are affecting the road traffic noise to evaluate the current condition of G city’s road traffic noise. We decide on a basis regarding an apartment price formation factor, and the apartment current price and the results that compared. To have a point scale, we set the maximum road traffic noise at a 8 lane road for 5 points, give 4 points for a 6 lane road, which has a 2.1~2.5 dB(A) difference compared to a 8 lane road, give 3 points for a 4 lane road, which has a 5.2~5.5 dB(A) difference compared to a 8 lane road, and set 2 points for a 2 lane road and lower. If we set the standard floor plan as horizontal and a living room facing the roadside, the horizontal and living room facing the opposite side of the road is 1 point because it differs by 14.1 dB(A), and the vertical is 3 points since the difference is 5.3 dB(A). If we make grades by the distance, making standard the fifth floor with little soundproof effect from apartment to road, we observe a measurement below 2.9 dB(A) at a distance of less than 10 m and 5 dB(A), decreased at a distance of 20 m. Therefore, 4 points were given for less than 10m, 3 points for 10~20 m, 2 points for more than 20 m as we can apply the effect of a decay distance of line sound source and the decrease in noise effects of more than 6 dB(A), 1 point for more than 40m, and 0 points for more that 80 m since it is negligible. 28 apartments got 0 points because there is no effect of road traffic noise from other apartments, and 50 apartments where only the road at one side effect them got 5~10 points. 4 apartments (17-2, 6-3, 10-4, 3-3) received over 20 points. 15 cases showed a difference between developer price and resale price, and 11 cases (73%) among them showed the same trend (price increases with a low road traffic noise restriction factor point) with the point of road traffic noise restriction factor. 4 cases demonstrated the opposite trend, showing price increases with a high restriction factor point. Among the 4 cases, case numbers 2,6 and 9 appear to be more affected by the location factor (business district) than the road traffic noise restriction factor, and case number 1 appears to be affected by the building factor (openness and direction).
        6 7 8 9 10