광액시료와 비-자성광액시료에 포함된 황비철석을 자류철석으로 상변환 시키기 위하여 그리고 비소 함량을 2,000 mg/kg 이하로 제거하기 위하여 마이크로웨이브 장치를 다양한 시간으로 가열하였 고, 습식-자력선별하였다. 마이크로웨이브 가열시간이 증가함에 따라 황비철석 표면의 가장자리부터 자류철석으로 상변환이 일어났고, 열점 현상에 의하여 자류철석 내부에 용융공극과 마이크로-크랙들 이 형성되었다. 마이크로웨이브 가열을 10분간 수행한 광액시료(비소 함량 : 14,732.66 mg/kg)와 비- 자성 광액시료(비소 함량 : 19,970.13 mg/kg)를 습식-자력선별하여 자성광물로 분리시킨 결과, 10분 가열한 자성광물 시료에서 만 비소 함량이 2,000 mg/kg 이하로 나타났다. 따라서 향후 비소 페널티 부과 대상인 복합황화광물을 마이크로웨이브 가열과 습식-자력선별을 효과적으로 활용하면, 비소 함 량을 페널티 부과대상 이하의 광석광물을 얻을 수 있을 것으로 기대한다.

To prevent climate change which is thought to be caused by the carbon dioxide emitted from industrial facilities by human activities, the efforts to reduce the concentrations of carbon dioxide in the atmosphere have been widely made. One of the method is to capture carbon dioxide by liquid absorbent. In this method, flue gas containing carbon dioxide is introduced to the absorber where the absorbent captures carbon dioxide selectively. After capturing, carbon dioxide is separated by heat at desorber and separated CO2 is transprted to storage site such as deep ocean or underground. However, stored CO2 is not permanently stable and these can be problematic that can cause ecosystem destruction due to low pH of the gas. By applying metal cation supplying unit after the capture process, carbon dioxide can be converted to metal carbonate salt in solid phase which can be stored stably or can be utilized or reused for industrial application. In this research, the mechanisms of carbon dioxide conversion were suggested and basic properties and conditions of the system were introduced.

In this study, GC-MS linked with an automatic thermal desorber was used to quantitatively analyze the odorous and volatile compounds in the gas emitted from a sewage sludge drying facility. In addition, the removal characteristics of these compounds were investigated by using a pilot-scale packed bed wet scrubber. A quantitative analysis for 58 odorous and volatile compounds in the gas was successfully achieved with GC-MS and GC-FPD. The a quantitative analysis revealed the major odorous compounds were hydrogen sulfide and acetaldehyde. In addition, D-type siloxane compounds such as octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5), and dodecamethylcyclohexasiloxane (D6), were quantitatively measured. The concentrations of siloxane compounds measured in the gas were in the range of 4.54- 7.36 ppmv, higher than those in landfill gas. The average removal efficiency of the odorous and volatile compounds in a wet scrubber was 67.37%. D4, D5, and D6, which are hydrophobic compounds, were also removed by as much as 50.68%, 44.56%, and 70.26%, respectively.

To investigate the effect of soluble silicate zeolite dressing of the rice against bakanae disease, field trial in reclaimed land and in vitro were carried out. The coated rice seeds (SCS) which were dressed with the mixture of 25% silicic acids (binder), and the zeolite (coating powder). In wet direct seeding, uniform scattering of rice seeds on the soil surface and the better seedling establishment were shown in SCS treatment plots. The incidence of bakanae disease began from the mid tillering stage toward the heading stage. Around heading stage, the ratio of infected tillers reached its highest point by 9.9% in non-SCS treatment plots. While, in SCS treatment plots, the ratio of infected tillers was no more than 0.01%. The vitality of the pathogenic fungi of bakanae disease in the SCS and non-SCS samples were assessed. Samples were incubated for one week keeping proper humidity at 30°C after inoculated with panicles of infected rice plants from experimental field plots. In non-SCS treatment, pinkish colonies were formed on the grain surface of panicle of infected plants, and mycelium, macro-conidia and micro-conidia were developed actively inside part of infected grain inoculated. While in SCS treatment, micro-conidia and mycelium were not survived and the growth of macro-conidia, mycelia were greatly inhibited and withered. Based on the results, it is concluded that the environmental friendly control of bakanae disease by use of SCS is possible and soluble silicate can be applied as agents for replacement of seed disinfection.

By the strengthening of sewage treated quality law and the amount of sewage sludge every year is increasing in Korea. However, it is difficult to disposal of sewage sludge due to ocean dumping restriction. As an alternative to this, drying, incineration, anaerobic digestion etc. is applied, which is uneconomical in most be processed by the consumption of energy. In particular, anaerobic digestion technology has been installed in the sewage treatment 65 plats in Korea’s STP(sewage treatment plant). It is most of the digestion efficiency requires the application of improved technology to less than 50%. As an improvement technology for most anaerobic digester, ultrasonic, electronic beam, ozone etc. solubilization method using has been mainly used. Therefore, in this study, after the wet milling particles of sludge to subject the sludge that has not been decomposed in the digested sludge circulating fluid of anaerobic digestion, was let examine the characteristic at the time of ozonation. The size of the particles before and after the wet milling, which is the measurement at each 105.26 μm and 77.18 μm, solubilization rate is increased to 23.5%. When ozonation after wet milling using sludge is determined as possible to improve the efficiency.

Background : Aruncus dioicus var. kamtschaticus, functional wild vegetable, is perennial herb and young leaves with soft texture are generally used as edible food. So the demand for the vegetable has increased recently. This study was carried out to determine the effects of temperature and shading on germination characteristics of A. dioicus. Methods and Results : The experiment was performed by temperature and shading treatments. Seed pre-treatment before the germination experiment was carried out by the storage in low temperature (4℃) under wet condition (LTW) for 0, 15, 30, 45 and 60 days and shading treatment were 35%, 50%, and 75% under control, BA (6-benzyladenine) and GA3 (gibberellic acid) condition for 24 hours. Increasing the length of the storage periods led to increases seed germination percent in low temperature (4℃) under wet condition (LTW), germination rate of A. dioicus seed was the highest at 15℃ with 60 days of seed pre-treatment. In the case of seeds pre-treatment with LTW, the more temperature went up, the more days to 50% of Germination of Final Germination Rate (T50) went down. As a result of surveying shading treatment, germination rate was the highest in control of 35% shading and the next higher was in control of 50% shading. Conclusions : It is concluded that the temperature and shading are important factors to produce A. dioicus. Also, We suggest these results as basic data of A. dioicus for sexual propagation.

눈잣나무는 우리나라에서 산림청 지정 멸종위기종으로 구분 되어 있다. 눈잣나무는 설악산 대청봉 지역(해발고 1550–1700 m) 에만 제한적으로 분포하고, 대부분의 구과가 조류와 설치류의 피해를 받기 때문에 종자를 확보하기 어렵다. 본 연구는 눈잣나 무의 현지외보존림 조성을 위하여 습사, 예냉 및 GA3 처리가 눈 잣나무 종자발아에 미치는 영향을 알아보기 위해 수행되었다. 눈잣나무 종자에 대해 습사 및 예냉처리를 각각 1, 2, 3, 4, 5개월 처리하고 GA3는 0, 100, 500, 1,000, 2,000, 3,000 ㎎/L 농도로 처리한 뒤 페트리디쉬에 치상하였으며 25℃의 광조건에서 실험 하였다. 종자 발아율, 평균발아일수, 발아속도를 조사한 결과, 습사와 예냉처리는 모두 종자 발아를 향상시키는데 효과적으로 나타났다. 그러나 두 저온처리의 방법에 따른 차이는 나타나지 않았다. 각각의 처리에서 처리기간이 길어짐에 따라 종자 발아 가 향상되었으나, 3개월 이상의 처리에서는 종자 발아의 향상이 통계적으로 유의하게 나타나지 않았다. GA3 처리에서도 눈잣나 무의 종자 발아가 효과적으로 향상되었는데, 100 ㎎/L 처리 조 건에서 발아율이 79.0%로 나타났다. 그러나 GA3 고농도 처리 조건(2000 ㎎/L 이상)에서는 오히려 종자 발아가 감소하였다. 결론적으로 3개월 이상의 습사처리와 GA3 100 ㎎/L 처리가 눈 잣나무의 종자의 발아향상에 적절한 방법으로 나타났다.

The objective of this work was to treat complex mal-odor of food waste with micro-bubbles from enhanced wet scrubber system, where the pilot plant was operated. Micro bubbles from the enhanced reactor of venturi scrubber were successfully generated through the air atomizing process with high velocity more than 60 m/sec and played an important role in the removal of mal-odor. Mal-odor was effectively changed into the micro-bubble and treated with washing chemicals together. Through establishing two series connection of the reactors, 85.2 % removal efficiency of complex mal-odor was obtained in case of average 940 times of input air. 0.35 kg/hr of sulfuric acid, 0.188 kg/hr of sodium hydroxide and 0.043 kg/hr of hypochlorite were injected for chemical washing.

In this paper, we proposed a new algorithm of the guidance line extraction for autonomous weeding robot based on infrared vision sensor in wet paddy. It is the critical process for guidance line extraction which finds the central point or area of rice row. In order to improve accuracy of the guidance line, we are trying to use the morphological characteristics of rice that the direction of rice leaves have convergence to central area of rice row. Using Hough transform, we were represented the curved leaves as a combination of segmented straight lines on binary image that has been skeletonized and segmented object. A slope of the guidance line was gotten as calculate the average slope of all segmented lines. An initial point of the guidance line was determined that is the maximum pixel value of the accumulated white columns of a binary image which is rotated the slope of guidance line in the opposite direction. We also have verified an accuracy of the proposed algorithm by experiments in the real wet paddy.

Ecotoxicity assessments with the physiochemical water quality items and the bioassay test using Daphnia magna were conducted for 18 selected effluents of 6 industrial types (metal processing, petroleum refining, synthetic textile manufacturing, plating, alcohol beverage manufacturing, inorganic compound manufacturing) being detected toxicity from industrial effluent in Ulsan city, and the interrelationship between total toxic unit (ΣTU) and concentrations of Water Quality Conservation Act in Korea were investigated. The average toxic unit(TU) of effluents for 6 industrial types displayed the following ascending order: petroleum refining (0.2) < synthetic textile manufacturing (0.6) < alcohol beverage manufacturing (0.9) < metal processing (1.3) ≤ inorganic compound manufacturing (1.3) < plating (3.0). These values were less than effluent permission standard. Based on the result of substances causing ecotoxicity, the correlation analysis was not easy because most of heavy metals were not detected or were less than effluent permission standard. Toxicological assessment of industrial effluent was suitable for the evaluation of the mixture toxicity for pollutant. The whole effluent toxicity test using a variety of species was needed for the evaluation of industrial wastewater.

The aim of this paper is to compare the characteristics of the T-P removal from synthesized municipal wastewater by electro-coagulation using cylindrical Al and Fe electrode as anode. For this purpose, a concentric circle type electrolysis reactor was used and the operating conditions for T-P removal from synthesized wastewater are as follows; potential 10 V, electrolyte 0.03% NaCl, initial T-P concentration 1.0 ~ 6.0 mg/L and flow rate 1.0 ~ 5.0 L/min. From the experimental results, T-P concentration of treated wastewater was decreased to less than 0.2 mg/L enough to discharge standard and Al electrode showed performance than Fe electrode for T-P removal by electro-coagulation. Optimal conditions for T-P removal to less than 0.15 mg/L which is 75% of discharge standard for large scale municipal wastewater plant (capacity higher than 500 m3/day) were obtained as follows; flow rate 2.503 L/min, and 2.337 L/min, HRT 1.059 min, 1.134 min, for Al and Fe electrode, respectively. Consumed mass of Al and Fe were of 3.76 times and 8.90 times respectively, were obtained to removed T-P at optimal conditions with potential 10 V, and 0.03% NaCl as electrolyte.

본 연구에서는 활용도가 낮은 메밀껍질을 활용하고자 효소처리 및 습식분쇄에 따른 통메밀 분말의 품질특성을 조사하였다. 습식 분쇄 통메밀 분말의 입도 분석 결과 메밀쌀의 평균 입자크기는 74.84 μm로 통메밀 분말에 비하여 약 4∼5배가량 큰 것으로 나타났으며 습식분쇄 90분 이후에 큰 차이가 없었다. 총 페놀성 화합물 및 총 플라보노이드 함량의 경우 메밀쌀에 비하여 통메밀 분말에서 모두 증가하였으며 분쇄가 진행될수록 조금씩 상승하였다. Rutin 함량 조사결과 메밀쌀 44.10 ppm에 습식분쇄가 진행될수록 함량이 상승하여 습식분쇄 90분에서 152.90 ppm까지 증가한 뒤 이후로는 큰 변화가 없었다. Quercetin의 경우 습식분쇄 시간에 따른 큰 함량변화는 없는 것으로 나타났다. 무기질 함량 조사결과 메밀쌀에 비하여 통메밀 분말에서 Ca, K 및 Mg의 함량이 높게 증가하였으며 Zn 및 Mn이 통메밀 분말에서 검출되었다. 유리아미노산은 통메밀 분말에서 총 유리아미노산 함량이 22.27 mg%로 증가하는 것으로 나타났으며 특히 glutamic acid는 14.58 mg%에서 30.45 mg%로 두 배 이상 증가하는 것으로 나타났다. 이상의 결과 통메밀 분말 제조를 위한 습식분쇄 시간은 90분이 적절하였으며 통메밀 분말의 경우 메밀껍질의 유효성분의 활용이 가능하였으며 습식분쇄과정을 통한 식감개선이 가능하여 차후 다양한 가공제품으로 활용이 기대된다.

The aim of this study was to select the abiotic tolerant sorghum mutants using chlorophyll a transient OJIP analysis of PSⅠ and PSⅡ so called Kautsky’s effect within 1 second. It was clearly identified that wwt-and drought tolerant sorghum mutants could be classified by wet factor index(WFI). On the basis of WFI, wet tolerant sorghum matants were classified as follows; Ⅰ group, MUT534 bmr/new, MUT525 bmr; Ⅱ group, M2P1207 bmr, 25M2-0404 bmr, MUT371 bmr24, unknown bmr22, 10M2-0775 bmr, MUT135 bmr23; Ⅲ group, M2P0411 bmr, MUT641 bmr, M2P1064 bmr36, MUT855 bmr, 25M2-0137 bmr/new, MUT436 bmr, M2P0929 bmr, 25M2-0026 bmr, 10M2-0387 bmr, 25M2-0173 bmr/new; Ⅳ group, 25M2-0698 bmr. In conclusion, for the selection of wet tolerance, four photochemical parameters such as Electron transport flux until PSI acceptors per PSII(RE1o/RC), Performance index for energy conservation from photons absorbed by PSII antenna, until the reduction of PSI acceptors(PI_total ABS), Driving force on absorption basis(DF_total ABS) and Electron transport flux from QA to QB per PSII(ETo/RC) were important photochemical parameters deduced from maximum quantum yield and electron transport efficiency.

Quality of injection sealer for water leakage maintenance be being managed by KS and ISO. However,the test result of bonding performance on the wet surface of concrete have some errors by an experimenter. Therefore this revision standard of test method is proposed by that the new tester is manufactured for solving this errors in this study.

최근 개발된 직파재배의 일종인 무논점파는 무논점파기(8조식, 15×28cm , 주당 5~8립)를 이용하여 파종하므로 이앙재배의 재식거리와 유사한 밀도를 유지할 수 있는 장점이 있다. 벼 무논점파재배의 생육 및 출수특성과 출수일변동에 따른 등숙율과 완전립율의 변이를 알아보고자 국립식량과학원 답작과 논포장(수원)에서 2009년부터 2011년까지 3년동안 본 시험을 수행하였다. 1. 무논점파는 입모수는 기계이앙의 재식밀도와 큰 차이가 없었으나 분얼수가 많아 최고분얼기에 단위면적당 경수는 기계이앙의 1.3~2배였다. 최고분얼기 이후 분얼수는 감소해 성숙기 이삭수는 기계이앙과 큰 차이가 없었다. 2. 무논점파의 출수전 생육일수는 운광벼 84일, 호품벼 98일로 기계이앙의 파종일로부터 14일, 19일의 재배기간이 단축되었다. 3. 무논점파의 성숙기 생육특성은 간장과 수장 및 면적당 이삭수는 기계이앙과 차이가 없었다. 통계적 유의성은 없었으나 수당립수는 많아지는 경향이었다. 4. 출수기는 무논점파가 이앙보다 운광벼는 9일, 호품벼는 3일 늦어졌는데 호품벼의 연차간 변이가 작았다. 호품벼는 출수기간이 기계이앙보다 2일 짧아 동시출수율이 높았다. 4. 무논점파재배시 출수일변이에 따른 등숙율과 현미완 전립율은 기계이앙과 차이가 없거나 오히려 높은 것으로 나타났으나 조생종인 운광벼보다 중만생종인 호품벼의 연차간 변이가 적어 무논점파 안정성이 우수한 것으로 나타났다.

12종 천일염 시료의 성분 분석을 비교한 결과, 식염함량은 국내산 장판염이 85.1%, 국내산 토판염이 89.3%, 수입산 천일염이 91.3%로 나타났다. 국내산 장판염의 불용성분은 0.05%로 가장 낮게 나타났으며 수분함량은 6.4%로 가장 높게 나타났다. 국내산 장판염의 Na 함량은 수입산에 비해 다소 낮게 나타난 반면 Mg, K 함량은 세계적으로 유명한 프랑스 게랑드 소금에 비해 유의적으로 높게 나타났다. 따라서 우리는 인체에 꼭 필요한 무