The objective of this study was to conduct research and analysis using Group Focus Interview to survey the between construction site workers and managers implementing for the Severe Accident Punishment Act. Focused on measures to improve safety management effectiveness for the effectiveness of establishing a safety management system. A plan to improve the efficient safety management system was presented to 50 construction industrial managers and workers. In order to ensure the industrial accident prevention policies appropriately, it is necessary to be aware of safety obligations for workers as well as business operators. In addition, despite the existence of a commentary on the Serious Accident Punishment Act, confusion in the field still persists, so in the event of a major accidents, the obligation to take safety and health education is strengthened, and effective case education is proposed by teaching actual accident cases suitable for actual working sites. It is necessary to make all training mandatory, and it is necessary to reconsider awareness through writing a daily safety log, awareness of risk factors, etc., and writing down risk information. Above all, at the construction ordering stage, it is necessary to keep the construction safety, request corrections and supplements for problems issues that arise, and consult between the orderer and the construction company about the problems issues. Rather than having only the construction company correct or supplement the safety management plan, the contents should be shared with supervisors and workers to establish a more practical solution. Results of this study will contribute to improving the effectiveness of the serious accident and construction safety management system.

This study attempted to provide implications by analyzing the impact of business Owner’s safety commitment on industrial accidents and examining the mediating role of management supervisors’ safety leadership and worker participation. Analysis was conducted on 2,067 manufacturing sites with 20 to 50 employees in the 10th Occupational Safety and Health Survey data. SPSS waw used to secure the reliability of the measurement variable. Hypothesis vertification was carried out after securing the suitability and validity of the structural model using AMOS. The direct impact of three latent variables on industrial accidents was confirmed: the business owner’s safety commitment, the management supervisor’s safety leadership, and the worker participation. The employer’s safety will and the management supervisor’s safety leadership do not directly affect industial accidents, but it has been verified that worker participation has a diret impact on industrial accident reduction. In addition, it has been confirmed that the safety leadership and worker participation of the management. Supervior have a complete mediating effect on the reduction of industrial accidents by mediating with the safety leadership of the management supervior and the participation of the workers. This study analyzed the impact on industrial accidents by dividing the stakeholders constituting the workplace into three classes: business owners, superviors, and workers, but the results suggest that employers and all workers inside the workplace may be organically linked to achieving the goal of reducing industrial accidents. Therefore, in order to establish an autonomous safety management system for safety and health at workerplaces, efforts are needed to reduce industrial accidents in their respective location by forming an organic community among internal stakeholders.

Since last year, the government has enforced the 'Act on the Punishment of Severe Accidents, Etc.' (hereafter referred to as the 'Serious Accident Punishment Act'), which punishes business owners and business managers who fail to fulfill their duty of safety measures with 'imprisonment of one year or more' and the Occupational Safety and Health Act. Based on this, various occupational safety and health policies were developed, including the operation of a system related to entrusting the work of safety managers. Despite these efforts, the effect of implementing the Severe Accident Punishment Act is a groundbreaking change in the current disaster prevention policy, which has increased by 0.02%P and 0.03‱P, respectively, from the previous year to 0.65% of the total accident rate and 1.10‱ of the death rate per 10,000 people as of 2022. As the need emerged, attention was paid to 'collaboration and governance with safety management institutions' in the 'Severe Disaster Reduction Roadmap' announced by the Ministry of Employment and Labor in November 2022. In this study, a meaningful result was derived by comparing and analyzing the industrial accident status of workplaces entrusted by “A” safety management institutions with the national average based on the industrial accident survey table, and the types of industrial accidents that occurred in consigned workplaces were selected as intensive management targets. The policy direction for industrial accident prevention was established. It is necessary to develop safety management work manuals based on the results of this study, expertise, discover best cases of risk assessment and develop guides, and educate and train consigned workers. In addition, it suggests that the government's guidance and supervision are needed to advance the professionalism of safety management entrusted tasks, and that safety management institutions should strengthen their roles and functions for preventing and reducing industrial accidents. However, due to difficulties in disclosing information of specialized safety management institutions, the limitation of the provision, collection, and viewing of research-related data to “A” specialized safety management institutions remains a limitation of the research. It seems likely that more thorough research will be conducted.

김정은 시대 북한 재해관리는 최고지도자의 관심과 법률 보완을 통해 체계적 관리로 발전하였다. 김정은 시대 재해관리 체계 확립에 있어 가장 우선시 되었던 조치는 2014년 「재해방지 및 구조, 복구법」 제정이다. 김 정은은 재해 관련 신속한 예방과 대응, 복구를 위해 ‘재해방지 및 구조, 복구법’을 새롭게 제정하고 재해의 범위를 자연·사회·보건으로 규정하여 관련 법률 적용을 일원화하였다. 다음 조치로 김정은의 관심과 현지지도이 다. 2014년 평천구역 아파트 붕괴 사고 이후 김정은은 6개월 동안 9차례 건설현장 현지지도를 실시하였으며, 이후 「건설감독법(2014)」을 제정하여 건설현장의 엄격한 관리를 규정하였다. 2020년 대규모 수해 발생 이후 김 정은은 2개월 동안 8차례 수해 현장 현지지도를 실시하였으며, 이후 2021 년 「환경보호법」·「건설법」·「산림법」 수정보충 및 「시군발전법(2021)」을 제 정하여 지역 개발과 발전을 도모하였다. 2020년 코로나19팬데믹 현상 이 후 김정은은 총 22차례 정치국 회의를 개최하고 13차례 코로나19 관련 논의를 진행하였으며, 이후 「전염병예방법」 수정보충, 「비상방역법(2020)」· 「의료감정법(2022)」을 제정하여 코로나19 확산을 통제하고 코로나19 확진 자 관리를 위한 체계를 수립하였다. 마지막으로 체계적 재해관리를 위한 조직 구조를 구축하였다. 체계적이며 신속한 재해관리를 위해 국가비상설 재해방지대책위원회와 국가비상재해위원회, 부문별, 지방재해방지대책위원 회, 시도군인민위원회, 국토환경보호성, 중앙인민보건지도위원회, 중앙비상 방역지휘부 등 각 재해 유형별 관리체계를 세분화하여 유기적으로 대응할 수 있는 조직 구조를 구축하였다. 특히, 2020년 비상방역상황에서 사회안 전군을 전면에 내세워 신속한 비상방역활동을 실시하였다.

정부와 안전보건공단에서는 건설현장의 안전사고를 줄이기 위하여 감독․점검, 기술지도, 재정지원 등의 산업재해예방 활동을 지속적으로 수행하여 왔다. 하지만, 전체 산업의 사고사망만인율과 재해율이 전반적으로 감소 추세에 있는 반면에, 건설업의 사고사망만인율 및 재해율은 2014년 이후 오히려 증가 추세에 있다. 특히, 2016년 재해통계를 기준으로 전체 건설업 재해자의 약 70%가 공사금액 20억 미만의 소규모 건설현장에서 발생하였다. 이러한 소규모 건설현장의 재해를 줄이기 위해서는 현재의 산업안전보건법 상의 소규모 건설현장 산업안전보건관리체제와 고용노동부 및 안전보건공단에서 수행하고 있는 소규모 건설현장재해예방 사업에 대한 실효성을 파악하고 개선할 필요가 있다. 현 산업안전보건관리체제에서는 건축공사 기준으로 120억 이상인 공사인 경우 안전관리자를 의무 선임하도록 되어 있으며 3억에서 120억 미만 공사의 경우 재해예방지도기관의 기술지도를 받도록 되어 있다. 또한, 안전보건공단에서는 민간위탁기관을 지정하여 3억 미만 건설공사의 안전관리를 지원하고 있으며, 클린사업장 조성지원사업을 통해 20억 미만 소규모 건설현장의 추락재해예방을 위해 시스템 비계, 사다리형 작업발판 및 안전방망 등의 설치 비용을 지원하고 있다. 본 연구에서는 공사금액별 재해통계 및 안전관리자 선임관련 제도를 분석하여 안전관리자 선임 대상을 현행 건축공사 120억 이상인 공사에서 단계적으로 50억까지 확대할 것을 제안한다. 설문조사와 전문가 의견을 수렴하여 재해예방지도기관의 기술지도 영역을 조정하고 실효성을 강화하기 위한 방안을 수립하고, 클린사업장 조성지원사업의 사업 확대 요구 및 개선사항을 도출한다.

The purpose of this study is to provide basic data to help ensure the safety and enhance industrial competitiveness of plant construction projects by analyzing the safety management status of, mainly, chemical engineering plant construction projects, and proposing specific measures and models to reduce human/educational, technical/systemic, institutional disasters. This study was done using literature research and case study/empirical study methods. The results of this study are summarized as follows. First, we classified the major disasters from the quarterly released ‘major diaster cases in construction business’from Korea Occupational Safety and Health Agency according to the type of construction and presented the causes and prevention measures.

While Korea had achieved radical growth of construction industry, it also had accumulated problems in material, human and economical loss due to its low quality of safety level. Therefore, not only enterprises but also the nation is putting in a great deal of efforts for construction safety. However, its effect is not satisfiable. This research aims for change of construction cite by introduction of professional Safety Patrol Management System(SPMS) and consideration of its necessity. To consideration of its necessity, we compared and anaylzed average numbers of indicated dangers and safety accident incidences in each construction cites and we researched changes in worker's safety sense. It will establish the suitable design standards and suggest the basic database for estimating disaster and accident ratio.

Construction of the external wall framing using construction Gang-Form withstand the load of a full lift safety is very important in lifting rings can be a lot of Gang-Form is now fixed in the manner that you are welding and applied, but this study is based on the safety of the lifting ring to seek improvements were bolt type fixing method applied to the bonding type were part of the lifting ring in a manner fixed to the concrete surface and was applied in consideration of safety.

The disaster and safety accidents in any construction site occur inevitably. Since the on-site disaster and accident occurrence became one of major concerning factors in construction site, architects & building executers have been flooded with safety management advices. The purpose of this paper is to survey and analyze the effect of the application of Safety Patrol Management System(SPMS) upon the reduction of disaster & accident occurrences in construction site. In order to estimate and reduce the disaster and accident ratio in construction site, various surveyed data has been analysed. It will establish the suitable design standards and suggest the basic database for estimating disaster and accident ratio.

미세 조직은 SEM, FT-IR 스펙트라, 인장특성, 그리고 [NCO]/[OH]의 mole %, 입도분석에 의해 측정하였다. 친환경적인 NATM에 관한 관심이 고조됨에 따라 스테인레스같은 금속코팅에 더욱더 중요한 열경화 무용제 수지를 합성 하였다. 이 수지는 일반적 도료와 비교하여 매우 강도가 강하고 내구성이 매우 좋다. 폴리우레탄 수지는 폴리올, IPDI, 실리콘 계면활성제, 촉매, 충전제로 구성된다. 폴리우레탄 화합물은 가교제가 첨가된 수지가 가교제가 첨가되지 않은 수지보다 물성이 우수함을 나타냈다. 견고한 폴리우레탄 도료의 기계적 특성은 [NCO]/[OH]와 가교제가 증가함에 따라 강도가 증가하였다. 합성한 도료의 물성 향상은 스테인레스 산업뿐만 아니라 다양한 산업에서 폴리우레탄 고분자 수지가 강구조물의 보수보강에 많은 응용이 기대된다.

There are two kind of method to perform a safety management in industrial field. One is a management by safety manager employed in company and another one is safety management by acting agency. In case of the company that managed by the acting agency dose not coincide with the state of company and safety management performance because of the safety management is carry out by periodically. Therefore it is considered that the sufficient safety management is difficult. And a company that employ a safety manager also show a low level of safety management compare with the advanced country in view of safety and health. From the statistics of accident rate of the company, it is necessary that an improved safety management through the studying and analysing a coverall matters for the company that managed by acting company.