The purpose of this study was to determine the optimal mixing ratio of Gynura procumbens and milk in the preparation of beef patties. The experiment was designed according to the central composite design for estimating the response surface, demonstrating 10 experimental points including 2 replicates for Gynura procumbens and milk. The physical, mechanical and sensory properties of the test materials were measured, and a canonical form and perturbation plot were used to show the influence of each ingredient on the final product mixture. Results of the measurements showed significant increases or decreases in the following properties: dough moisture (p＜0.05); beef patty a (p＜0.001) and b (p＜0.001); hardness (p＜0.01), adhesiveness (p＜0.05), chewiness (p＜0.05), and gumminess (p＜0.05). In addition, the sensory measurements showed significant improvements in color (p＜0.001), flavor (p＜0.05), greasy (p＜0.05) and overall quality (p＜0.05). The optimum formulation calculated from the numerical and graphical analysis was 1.75 g Gynura procumbens and 20.44 g of milk.

현실세계의 구조물은 대부분 동하중의 영향을 받고 있지만, 구조해석이나 구조 최적화를 수행할 때는 정하중이 작용하는 것으로 가정한다. 실제 하중인 동하중을 고려하게 되면 다양한 하중들을 고려해야 하기 때문에 전산자원과 시간비용 측면에서 많은 제약이 따르기 때문이다. 그러나, 단순한 정하중 조건만을 고려하면 구조안전성 측면에서 바람직하지 못하기 때문에 가중치를 적용하거나 동하중을 대체하는 등가정하중을 적용하여 관련 문제를 보완하려는 연구가 진행되어 왔다. 본 연구에서는 등가정하중을 적용하여 동하중을 받고 있는 구조물에 대한 구조최적화 기법을 제안한다. 본 연구에서 적용하는 등가정하중은 기존 연구에서 제안한 바 있는 주자유도를 기반으로 하여 등가정하중 부과 위치를 결정하고 최적화 과정을 통해 산출한다. 이 과정에서 지나치게 큰 하중이 구해지지 않도록 가중치를 고려한 구속조건을 추가하여 기존 연구의 등가정하중의 최적화 과정을 보완하였다. 수치예제에서는 동하중이 작용하는 트러스 구조물과 평판 구조물에서 최적화된 등가정하중을 적용하여 사이즈 최적화를 수행함으로써 제안된 최적화 기법의 신뢰성을 검증한다.

Changes in the business environment in which intense and sustained growth and survival must meet a variety of customer needs (Q, C, D) and business side of the enterprise for profit structure reformation is absolutely necessary for innovation activities. So far, management of innovation in method BPR, PI, OVA, 6 Sigma, Strategic Purchasing, PPM, SCM etc. are being introduced. However, they have a limit of partial optimization and improvement-oriented techniques. So this paper studied the TPI(Total Profit Innovation) application in order to derive empirical methodology to maximize profitability for the domestic S foundry factory. To this end, long-term gains through structural analysis and intensity analysis to ensure continued growth and profitability strategy are devised through management Innovation analysis. And improvement projects was presented to solve main issues of five categories(Inventory, Sales Mix, Cost, Quality Cost, Skill and Work-load) We will expect the office productivity improvement and financial performance improvement and then continually accumulate and review the results.

Construction of the external wall framing using construction Gang-Form withstand the load of a full lift safety is very important in lifting rings can be a lot of Gang-Form is now fixed in the manner that you are welding and applied, but this study is based on the safety of the lifting ring to seek improvements were bolt type fixing method applied to the bonding type were part of the lifting ring in a manner fixed to the concrete surface and was applied in consideration of safety.

We show how a supplier can peg cost measures to the reliability of his time guarantees via the penalty costs considered in the framework. The framework also enables us to study the connections between the logistics network and the market. In this context, we show that even when the market base increases significantly, the supplier can still use the logistics network designed to satisfy lower demand density, with only a marginal reduction in profit. Finally we show how the framework is useful to evaluate and compare various logistics system improvement strategies. The supplier can then easily choose the improvement strategy that increases his profit with the minimal increase in his logistics costs.

The purpose of this study was to determine the optimal mixing ratio of Alaska Pollack (Theragra chalcogramma) and olive oil in the preparation of sausage. The experiment was designed according to the central composite design for estimating the response surface, which demonstrated 10 experimental points including 2 replicates for Alaska Pollack and olive oil. The physical, mechanical and sensory properties of test materials were measured. A canonical form and perturbation plot showed the influence of each ingredient on the final product mixture. Measurement results of the physical and mechanical properties showed a significant increase or decrease in the following properties: dough sweetness (p<0.05); sausage L (p<0.05), a (p<0.001), and b (p<0.01); hardness (p<0.01), chewiness (p<0.05), and gumminess (p<0.01). Also, the sensory measurements showed a significant improvement in color (p<0.05), flavor (p<0.01), taste (p<0.001), tenderness (p<0.05), chewiness (p<0.01), mositness (p<0.05), and overall quality (p<0.01). As a result, the optimum formulation by numerical and graphical methods was calculated as Alaska Pollack 35.74 g and olive oil 7 g.

The production type of foundry industry is a small quantity batch production methods that require the highly skilled technology in the global competition in the variety of customer needs and directly under the influence of fluctuations characteristic. Therefore suitability for small quantity batch production and flexible production capacity and price competitiveness is needed more than anything. To do this, we need transcription and comprehensive innovation activities to maximize the revenue structure of the organization and field survival foundation should be developed the TPI(Total Profit Innovation) process in all aspects of the organization and all employees are involved in order to create a cost, quality, time, and service part of the overall aim how to achieve those effects within a short period of time. We applied the TPI process for S company in the foundry business innovation and productivity through cost reduction. We will expect the productivity improvement and financial performance improvement and then continually accumulate and review the results.

The capability and cost effectiveness of UUV and USV bring to underwater survey, target detection and identification operations have been widely demonstrated and accepted in recent years. Future USV systems may deploy UUVs to gain the advantage of higher area coverage rates through multiple and simultaneous operations. In this paper, we present an architecture of USV and UUV for mine countermeasure with results of measures on effectiveness.

The effects of pressure and number of passes upon Biji paste properties using a high-pressure homogenizer (HPH)were investigated. A hydrocolloid of Biji was processed with a HPH at 15,000 or 25,000 psi and with 1 or 2 passes.The hydrocolloid was assessed for dietary fiber, protein, sugar content, water absorption index (WAI), water solu-bility index (WSI), rheological character, and distribution stability. As pass number and pressure increased, solubledietary fiber, sugar content, WAI, and distribution stability also increased, whereas particle size decreased. As aresult, processing at 25,000 psi and 2 passes is considered as a proper treatment for processing quality. In breadmaking with HPH treated Biji, volume, hardness, and cohesiveness of bread increased, while density decreased. Theoptimum processing condition for bread with HPH treated Biji was determined by a design expert program. Nineexperimental points were selected, and wheat flour (91-95%) and HPH Biji (5-9%) were chosen as the independentvariables. The optimum formulation of bread using the numerical analysis was set at 94.2% wheat flour and 5.8%HPH Biji with a 0.725 desirability value.

The purpose of this study was to determine the optimal mixing ratio of Allium hookeri powder and butter in the preparation of bread. The experiment was designed according to the central composite design for estimating the response surface, which demonstrated 10 experimental points, including 2 replicates for Allium hookeri powder and butter. Further, the mechanical and sensory properties of test materials were measured. A canonical form and perturbation plot conveyed the influence of each ingredient on the final product mixture. Overall, the measurement results of the mechanical properties showed a significant increase or decrease in dough pH, sweetness, volume, weight, height, specific volume, a & b-value of crumb and, springiness (p<0.05). Moreover, the sensory measurements demonstrated a significant improvement in color, appearance, texture, moistness and, overall quality. As a result, the optimum formulation from the numerical and graphical methods was calculated as 22.65 g of Allium hookeri powder and 47.77 g butter. After optimization, DPPH free radical scavenging activity, total phenolic content, and total plate counts over 10 days were evaluated. In sum, the results revealed the antioxidant and antibiotic actions of bread with Allium hookeri powder.

An efficient heuristic for two-vehicle-one-depot problems is developed in this research. Vehicle moving speeds are various along hour based time intervals due to traffic jams of rush hours. Two different heuristics are examined. One is that the delivery area assignment is made using Sweep algorithm for two vehicles by splitting the whole area in half to equally divide all delivery points. The other is using common area by leaving unassigned area between the assigned for two vehicles. The common area is reassigned by two stages to balance the completion time of two vehicle's delivery. The heuristic with common area performed better than the other due to various vehicle moving speeds and traffic jams.

PURPOSES : The purpose of this study is to propose delay-minimizing operation methodology of a signalized intersection based upon optimization of lane-uses on approaching lanes for an intersection. METHODS: For the optimization model of lane-uses, a set of constraints are set up to ensure feasibility and safety of the lane-uses, traffic flow, and signal settings. Minimization of demand to saturation flow ratio of a dual-ring signal control system is introduced to the objective function for delay minimization and effective signal operation. Using the optimized lane-uses, signal timings are optimized by delay-based model of TRANSYT-7F. RESULTS : It was found that the proposed objective function is great relation with delay time for an intersection. From the experimental results, the method was approved to be effective in reducing delay time. Especially, cases for two left-turn lanes reduced greater delays than those for a left turn lane. It is noticed that the cases for different traffic volume by approach reduced greater delays than those for the same traffic volume by approach. CONCLUSIONS : It was concluded that the objective function is proper for lane-uses optimizing model and the operation method is effective in reducing delay time for signalized intersections.

Laser welding is high power density welding process which is higher speed and productivity, lower thermal deformation. Recently, zinc coated sheet metal is used for many industrial due to the high corrosion resistance. This study explained that it used DOE(Design of experiment) and mathematical statistics method to optimize the conditions of high power laser welding process for zinc coated sheet metal. Finally, optimal condition for laser welding is selected for zinc coated sheet metal by alteration of welding joint width and gap.

PURPOSES : This study is to suggest time to spray curing compound, the amount of curing compound, and the number of times to spray curing compound based on indoor tests. METHODS : Based on the literature review, two methods are used in this study, One is test for water retention of concrete curing material and the other is test for abrasion resistance of concrete surfaces by the rotating-cutter method. Through those methods, curing compound was evaluated. RESULTS : The result of the laboratory experiment for time to spray curing compound indicates that 30 minutes after placing concrete is optimal. For the amount of curing compound, 0.5l/m2 is the minimum quantity for both concretes. Through test of the number of times to spray curing compound, method to spray the whole amount of curing compound in twice is more efficient than it to spray the whole amount at a time. Also, method of separately 30-50 minutes spray is better than method of separately 10-30 minutes spray. CONCLUSIONS : From the testing results, it can be proposed that optimum time to curing compound is 30±15 minutes, 0.5l/m2 is efficient for spraying the whole amount of curing compound at a time, and 0.4l/m2 is the best for spraying the whole amount of curing compound in twice, which sprays it in 20 minutes after 30 minutes from placing concrete.

본 논문에서는 유전알고리즘을 사용하여 철근콘크리트 구조물의 최적 지진설계를 효율적으로 수행하기 위해 클러스터를 사용하는 경우 확장성을 확인하였다. 클러스터를 구성하는 코어프로세서의 개수를 증가시키면서 유전알고리즘의 각 세대에 소요되는 시간의 감소를 관찰하였다. 단일 퍼스널 컴퓨터의 구성을 분류한 후, wall-clock time과 암달의 법칙으로 예상된 값을 비교하여 예상되었던 병목현상을 확인하였다. 이에 클러스터의 확장성에서 복합적인 요인에 의한 경향을 확인할 수 있었다. 병목현상의 물리적인 요인과 알고리즘 측면에서의 요인을 구분하기 위해 유전알고리즘의 개채수를 나누어 실험을 수행하여 결과를 확인하였다.

The SMC(Sheet molding compound) process is widely used in the automotive industry to produce parts that are large, thin, lightweight, strong and stiff. Compression molded parts are formed by squeezing a glass fiber reinforced UP(Unsaturated Polyester) sheet, known as sheet mold compound(SMC), between two heated cavity surfaces. This paper has performed flow analysis to predict optimization process of low density SMC. After five types of design variables and six types of response variables were defined, DOE(Design of Experiment) and RSM (Response Surface Method) were applied in order to measure sensitivity of design variables and realize optimization through regression model. After design optimization, the total warpage of the SMC is reduced by about 12% compared to the initial design of SMC and cure time, cure temperature, clamping force and flow pressure are decreased by 0.6∼27% in comparison with the initial design. By doing this, the production costs could be diminished.

District heating is a system of distributing heated water from centralized facilities to local homes and buildings. In this paper, we model the distribution planning problem as a supply chain planning problem and propose an explicit column generation algorithm to handle large scale data as well as nonlinear constraints. The algorithm has been successfully applied to a Korean district heating company and the computational experiments show that the integrated operation of district heating network improves the total profit compared to the previous isolated network operation.