The ship security accidents that occur in ships, at sea, and in ports have become increasingly more serious in recent years, and in particular, maritime terrorism and the abduction by pirates are emerging as an international problem. Accordingly, the International Maritime Organization implemented a measures to enhance ship security by adopting SOLAS Chapter 11-2, ISPS-code in 2004. In this study, it was investigated whether JDS-S4, a directional sound receiver developed for responding to ship security accident, has durability and safety suitable for ships. For the purpose, the conducted emission test (CE102) of the US military standard test (MIL-STD-461F) was performed, and it was confirmed that JDS-S4 satisfies the test conditions sufficiently.

The security accidents occurring in ships and at seas and ports became very serious, and in particular, the maritime terrorism and abduction by pirates have emerged at the international level as a problem. The international maritime organization (IMO), accordingly, entered into such forces as the SOLAS chapter and measures in order to reinforce the maritime security and the security for ships and port facilities in 2004. In this study, the JDS-S4 improved as an oriented speaker to reinforce the ship security by enabling the clear communication even at long distance was tested by using the conducted emission test(CE101) and a standard test of the US military standard (MIL-STD-461F). Also, the result of this study was shown to satisfy the standard.

PURPOSES : The purpose of this study is to measure and analyze the fugitive dust generated by each process through field tests to develop a technology to reduce fugitive dust generated during excavation-restoration work on road pavements. METHODS : The testbed was constructed based on a typical excavation-restoration construction section and comprised five sections for reproducibility and repeated measurements. The excavation-restoration work was divided into pavement cutting, pavement crushing, pavement removal, excavation, and restoration processes and fugitive dust generated by each process was measured. Fugitive dust (TSP, PM10, PM2.5, and PM1) was measured using a GRIMM particle spectrometer, which applies the principle of a light scattering spectrometer and can be measured in real-time. RESULTS : Analyses of the average mass concentration of PM10 generated by the excavation-restoration process are as follows: 1286.3 μg/m³ from pavement cutting, 246.8 μg/m³ from pavement crushing, 697.0 μg/m³ from pavement removal, 747.9 μg/m³ from excavation process, and 350.6 μg/m³ from the restoration process. In addition, the average particle size distribution of the excavationrestoration construction was in the order of PM10~PM2.5 (67 %), PM1 or less (24 %), and PM2.5~PM1 (9 %). The pavement cutting process is characterized by the emission of high concentrations of fugitive dust over a short time, compared to other processes. The pavement crushing process has the characteristic of steadily generating fugitive dust for a long period, although the emission concentration is small. CONCLUSIONS : In this study, it was found that the concentration and characteristics of fugitive dust generated during road pavement excavation-restoration works vary by process and the reduction technology for each process should be developed accordingly.

북한은 2017년 9월 3일 풍계리 핵실험장에서 6차 지하 핵실험을 단행하였다. 이전에 수행했던 핵실험들과 달리 풍계리 핵 실험장 주변에서 몇 차례의 유발지진이 발생하였고 이로 인해 지하에 갇혀 있던 방사성제논이 대기 중으로 방출되는데 영향을 끼쳤을 것으로 예상된다. 본 연구에서는 북한의 6차 핵실험 이후에 발생한 유발지진을 고려하여 핵실험으로 발생한 방사성제논의 몇 가지 방출 시나리오에 따른 대기확산 모의실험을 본 연구진이 개발한 LADAS (Lagrangian Atmospheric Dose Assessment System) 모델에 기상청의 수치예보자료를 적용하여 수행하였다. 방사성제논의 가능한 검출 위치와 시간을 찾기 위해, 1일 간격 및 1주일 간격의 지연방출뿐만 아니라 유발지진으로 유출된 지연방출 시나리오도 설정하였다. 포괄 적핵실험금지조약기구(Comprehensive Nuclear-Test-Ban Treaty Organization)에서 운영중인 전세계관측망(International Monitoring System)과 원자력안전위원회의 133Xe 탐지 결과는 유발지진으로 유출된 방사성제논의 방출 시나리오에 따른 모의실험의 결과와 대체로 부합되었다.

대기오염에 대한 관심은 국내·외에서 점진적으로 상승하고 있으며, 자동차 및 연료 연구자들은 청정(친환경 대체연료) 연료와 연료품질 향상 등을 이용하여 새로운 엔진 설계, 혁신적인 후처리 시스템 등의 연구를 통하여 차량 배기가스 및 온실가스를 감소시키고자 노력하고 있다. 이에 본 연구에서는 각기 다른 차량기술이 적용된 휘발유, 경유, LPG를 연료로 사용하는 7대의 차량을 대상으로 국내·외에서 법적시험모드로 사용되고 있는 도심모드, 고속모드, 급가·감속, 에어컨사용 및 겨울철 특성을 반영한 저온모드에서 온실가스의 배출특성을 확인하고자 하였다. 사용연료에 관계없이 대부분의 온실가스는 저온인 Cold FTP-75 모드에서 가장 안 좋은 결과가 나타나는 경향을 가지고 있다. 각 차량별 온실가스 증가 요인으로는 가솔린 차량인 A차량(2.0 MPI)과 B차량(2.4 GDI)에서는 최고속 및 급가·감속 , 에어컨 사용 , 저온 조건의 순인데 비해 E차량(1.6 T-GDI)은 에어컨 사용, 최고속 및 급가·감속 , 저온 조건의 순이다. G차량 (LPLi)은 에어컨 사용 , 저온 , 최고속 및 급가·감속 조건의 순으로 가솔린 차량과 다른 특성을 가지고 있다. 경유 차량에 있어서는 A차량(2.0 w/o DPF)과 B차량(2.2 w/ DPF)은 최고속 및 급가·감속 , 에어컨 사용, 저온 조건의 순이었고, F차량(1.6 w/ DPF)은 저온, 에어컨 사용, 최고속 및 급가·감속 조건의 순으로 확인되었다. 따라서, 각 연료별로 배출가스 저감 기술을 다르게 적용하여야 효과적인 방법이라고 할 수 있겠다.

Organic light emitting diode(OLED) has been developed fast from 1963 when electric light emitting phenomenon was discovered. PMOLED(passive matrix OLED) is producted earlier than AMOLED(active matrix OLED). PMOLED is mainly mounted at sub display, but AMOLED is mounted at main display. Nowadays AMOLED is expanded to PMP(portable multimedia players), navigation and TV market. Even thought OLED's market is opening to many applications, OLED's life is worried until now. If we know about OLED's real life, we need time to test so much time over 20,000hrs. Realistically, there is difficult to test such as long time with products from the information-technology sector having a short life cycle. In this paper, we study about OLED's accelerated test to reduce life test by current. We can design OLED's accelerated life model by the result of test. The model consists of design variables like ratio of light emitting, organic material structure, condition of aging, etc. In conclusion, this model can be applied to study about organic material, machine and manufacturing process etc, and also it's possible to develop a method of manufacturing process & materials, so we need to study on the subject of this paper continuously.

The objective of this study is to evaluate the mechanical behaviors and structural integrity of the weldment of high strength steel by using an acoustic emission (AE) techniques. Monotonic simple tension and AE tests were conducted against the 3 kinds of welded specimen. In order to analysis the effectiveness of weldability, joinability and structural integrity, we used K-means clustering method as a unsupervised learning pattern recognition algorithm for obtained multi-variate AE main data sets, such as AE counts, energy, amplitude, hits, risetime, duration, counts to peak and rms signals. Through the experimental results, the effectiveness of the proposed method is discussed.

This study was performed to analysis the concentration of TVOC, 5VOC and formaldehyde for building material of total 262 using 20L test chamber. The concentration of TVOC, 5VOC and formaldehyde were measured 1.001㎎/㎡･h, 43.032㎍/㎡･h, 0.012㎎/㎡･h, respectively. TVOC concentration of paint and floor covering occupied the largest concentration of the indoor building materials as 2.689㎎/㎡･h, 2.120㎎/㎡･h, respectively. 5VOC concentration of floor covering was measured 106.636㎍/㎡･h. Toulene and xylene were occupied the largest part of the 5VOC as 51.2% and 33.1%, respectively. The concentration of formaldehyde for furniture materials occupied the largest concentration of the indoor building material as 0.072㎎/㎡h.

The objective of this study is to evaluate the mechanical behaviors and structural integrity of the weldment of high strength steel by using an acoustic emission (AE) techniques. Simple tension and AE tests were conducted against the 3 kind of welding test specimens. In order to analysis the effectiveness of weldability, joinability and structural integrity, we used K-means clustering method as a unsupervised learning pattern recognition algorithm for obtained multivariate AE main data sets, such as AE counts, energy, amplitude, hits, risetime, duration, counts to peak and rms signals. Through the experimental results, the effectiveness of the proposed method is discussed.

In recent years, the number of complaints about indoor air pollution caused by volatile organic compounds(VOCs) has increased. It is important that evaluating and understanding emission of indoor air pollutant from building materials. The aim of this study was to evaluate emission test methods for liquid phase building materials such as paint, adhesive and sealant, and to determine the emission of total volatile organic compounds(TVOC) from liquid phase building material. The quantity of TVOC emission was measured by a gas chromatography/mass spectrometry (GC/MSD). It was found that liquid phase building materials were classified according to their use and ingredient. The TVOC concentration from oil-based paint was the highest among 8 groups of test materials. The unidentified volatile organic compounds occupied 83.0% of TVOC emission from test materials. The aliphatic hydrocarbons and aromatic hydrocarbons occupied 7.2%, 6.9% of TVOC, respectively. The concentration of TVOC decreased by an increase during emission test period. After 3 days, the concentration of TVOC from paint, adhesive and sealant were about half of the concentration at the first day. The ratio of concentration between 7 days and 1 day was 0.11～0.15 from water-based paint and 0.46～0.48 from epoxy adhesive.

The purpose of this study is to optimize an emission test method for building materials and to understand the characteristics of total volatile organic compounds (TVOC) and carbonyl compounds emission from building materials, especially solid-phase building materials, using a small chamber test method. As a result of the evaluation for small chamber system, temperature and humidity was maintained constantly at 24.5℃, 50.2%. The background concentration of total volatile organic compounds and formaldehyde were also controlled below 20 ㎍/㎥ and 0.5 ㎍/㎥, respectively. Air leakage of emission test chamber and the duplicate precision between two emission test chambers were satisfied. As a result of evaluation for sampling and analysis system (such as the breakthrough test), repeatability of response factor, and retention time in GC/MS and HPLC, desorption efficiency, method detection limits were excellent. The concentration of total volatile organic compounds emitted from wallpapers (made of PVC) was higher at 25℃ than at 23℃. Also, the concentration of formaldehyde emitted from floorings made from non-PVC (wood-based) was higher at 25℃ than at 23℃. On the other hand, there was not a significant difference between the concentrations of total volatile organic compounds emission from wallpaper (made of PVC) which was stored for 2 weeks at 25℃ and 4℃ with tight sealing. In conclusion, emission characteristics of TVOC and formaldehyde from solid-phase building materials would be expected to apply to the plan for the management of indoor air quality.

This study was conducted on the properties of exhaust emissions of diesel oil and fish oil blended with diesel oils using a direct injection diesel engine at different loads, and on the conditions of carbon deposits of diesel oil and 40% blend oil in the combustion chamber after 20 hours operation at 1]2 load. The properties of exhaust emissions by fish oil blended with diesel oils showed no significant difference with diesel oil. However, soot emissions decreased, increasing the ratio of fish oil. Carbon deposits by fish oil blended with diesel oils were high level compared with diesel oil, which might be overcome by preheating of fuel oil and operating conditions.

응력부식균열(SCC) 감수성평가를 위한 여러 시험방법들중 저변형율시험방법은 비교적 ?은 시간내에 금속재료의 SCC감수성을 평가하기 위한 효과적인 시험방법이다. 그러나 저변형율 시험방법만으로 SCC과정의 미시적 파괴거동ㅇ르 분석하는 것은 매우 어렵다. 종래, 음향방출(AE)시험은 재료의 파괴과정시 미시균열의 개시 및 전파거동을 감시하는데 유효한 기법으로 잘 알려져 있다. 그러므로 본 논문에서는 저변형율시험과 음향방출시험을 이용하여 SCC의 전파과정과 AE신호 특성사이의 상호관계를 분석하였다. 실험결과, 재료의 미시파괴 과정에서 발생하는 AE신호들은 뚜렷히 시험환경에 의존하였으며, 인공해수중에서 SCC과정시 발생된 AE신호 특성은 Air상태 보다 상당히 크게 나타났다. 그리고 SCC거동은 AE신호의 진폭인자로서 명확하게 평가할 수 있다.