We analyzed risk factors of coastal gillnet fishers during fishing process and considered work safety measures to reduce safety accidents during fishing using a UWB (ultra wideband) based positioning system. The static position accuracy of the UWB based positioning system was 45 cm. When entering a port, there is a risk of falling overboard. When casting a net, there was a risk of falling overboard due to being hit by fishing gear or guards, or getting caught in a buoy line or sinker line. When hauling a net, there is a risk of getting caught between fishing gear and net hauler, and the risk of musculoskeletal disorders due to repetitive work over a long period of time. Most safety accidents during work on fishing boats are blamed on human errors of the fisher and skipper, but safety accidents occur due to a mixture of mechanical and equipment factors, work and environmental factors, and management factors in addition to human errors. Therefore, the 4E were presented as countermeasures against the 4M, which are causes of safety accidents, and the proposed measures were used to identify risk factors for operation process, comply with work safety rules, and ensure the wearing of personal protective equipments. We need to reduce safety accidents during work by making it part of our daily routine. These research results can be used in the future for optimal placement of fishing gear and fishing nets in other coastal industries where safety accidents occur frequently.

Although it is highly dependent on the production of coastal and offshore fishing, the Fishing Vessels Safety Fisheries Act was enacted in 2019 due to the continuous increase in marine accidents of coastal and offshore fishing vessels. However, the law is too focused on fishing and navigation in certain waters and does not contain accident-preventive content. Ministry of Oceans and Fisheries proposes a plan to revise the Fishing Boat Safety Fishing Act through legal comparison with Japan's Seafarers' Labor Sanitation Rules. It also proposes an amendment that includes the content of the Seafarers Act on post-accident action obligations. Under the Fishing Vessels Safety Fishing Act, the safety fishing education is implemented for specific people and adopts a method of delivery education after completing the education. The reason for this is that the educational requirements are not sufficient compared to the number of education personnel. Moreover, four hours of education are conducted once a year, which is not suitable for insufficient educational conditions. For efficient safety fishing education, improvement measures are proposed compared to education in the United States and the United Kingdom.

연안통발 어민에 대한 설문조사 결과, 통발 투하 및 인양 중 로프 걸림에 따른 전도사고가 42.1 %로 가장 높았고, 갑판에서 미 끄러짐과 통발 권양장치의 신체 협착사고가 각각 21.1 %를 차지하였다. 또한 가장 위험한 작업은 전체 조사대상의 53.2 %가 통발 인양과 정을 들었고, 어종선별 33.8 %, 통발 투하 9.1 % 순으로 응답하였다. 어민들은 통발 권양장치의 주요 개선 요구사항으로 응답자의 36.8 %와 31.6 %가 통발을 수중에서 작업갑판까지 수월하게 인양하는 방안과 통발 인양 시 로프 장력 극복과 슬립 방지 등 사고저감 방안을 언급하 였다. 본 연구에서 소형 통발어선 권양장치는 구동롤러와 로프 간의 적정한 접촉각을 통해 로프의 접촉면적과 마찰계수를 증가시킴으로 써 권양력을 높이는 것이다. 구동롤러와 로프 간의 접촉각이 1°, 5°, 9°, 14° 및 19°일 때 로프 장력은 각각의 접촉각에 따라 차이를 보였으 며, 9°일 때 가장 높은 392.62 kgf까지 측정되었다. 이러한 실험결과를 반영하여 시제품 권양장치를 제작하고 총 길이가 100 m인 로프에 4 m 간격으로 총 25개의 통발을 해상에 설치한 후 인양에 따른 로프 장력을 측정하였다. 그 결과, 로프 장력은 통발 인양작업 초기에 급격히 증가하여 가장 높은 31.89 kgf로 측정되었으며, 이후에는 크게 낮아졌다. 따라서 소형 통발어선 권양장치의 권양력은 인양작업 초기에 부 여되는 최대 로프 장력 값을 기준으로 설계하는 것이 타당하다.

In order to understand basic data for improving the fishing system and fishing vessel structure in coastal improved stow net fishery, a questionnaire survey and on-site hearing were conducted from May 10 to June 11, 2019 to analyze opinions on the improvement of operation status and fishing vessel structure. The questionnaire survey consisted of ten questions on the operation status of coastal improved stow net fishery and six questions on the improvement of fishing vessel structure, and the results of each question were analyzed by the region, the captain’s age, the captain’s career and the age of fishing vessel. As a result of analyzing opinions on the operation status of the coastal improved stow net fishery, it was found that the average time required for casting net was 32.8 to 33.0 minutes and that the average time required for hauling net was 41.0 to 42.2 minutes which took 10 to 12 minutes more than for casting net. The most important work requiring improvement during fishing operation (the first priority) were ‘hauling net operation,’ ‘readjustment and storage of fishing gear,’ and ‘fish handling’ and the hardest factor in fishing management were in the order of ‘reduction of catch,’ ‘labor shortage’ and ‘rising labor costs.’ The most institutional improvement that is most needed in coastal improved stow net fishery was an ‘using fine mesh nets.’ Most of the respondent to the questions on the experience in hiring foreign crews was ‘either hiring or willing to hire foreign crews,’ and the average number of foreign crews employed was found to be 2.3 to 2.4 persons. The most important reason for hiring (or considering employment) foreign crews was ‘high labor costs.’ The degree of communication with foreign crews during fishing operation were ‘moderate’ or ‘difficult to direct work.’ The most important problem in hiring foreign crews (the first priority) was an ‘illegal departure.’ As the survey results on the opinion of structural improvement of coastal improved stow net fishing vessel, the degree of satisfaction with fishing vessel structure related to fishing operation was found to be somewhat unsatisfactory, with an average of 3.3 points on a five-point scale. The inconvenient structure of fishing vessel in possession (the first priority), the space needed most for the construction of new fishing vessel (the first priority) and the space considered important for the construction of new fishing vessel (the first prioprity) was a ‘fish warehouse.’ The most preferred equipment for the construction of new fishing vessel were ‘engine operation monitoring’ and ‘navigation safety devices.’ The average size (tonnage class), the average horse power and the average total length of fishing vessel for proper profit and safety fishing operation was between 13.8 and 14.0 tonnes, 808.3 to 819.5 H.P. and 23.4 to 23.5 meters, respectively. The results of the operation status of coastal improved stow net fishery and the requirement for improving the fishing vessel structure are expected to be provided as basic data for reference when we build or improve the fishing vessel.

In order to collect basic data for the improvement of fishing systems in coastal improved stow net fishery, a questionnaire survey and on-site hearing were conducted from May 10 to June 11, 2019 on the basic items of coastal improved stow net fishery and safety accidents that occurred during fishing operation. The questionnaire for the survey on the actual conditions of coastal improved stow net fishery consisted of a survey on basic matters (six questions) and a questionnaire (six questions) on safety accidents occurring during fishing operation. The results of the survey on basic items were analyzed by region (Incheon, Seocheon, Gunsan and Mokpo), by the captain’s age (less than 50 years of age, 50 to 60 years and more than 60 years of age), by the captain’s career (less than 20 years, 20 to 30 years, 30 to 40 years and more than 40 years) and by the age of fishing vessel (less than 10 years, 10 to 20 years and more than 20 years). According to the survey on basic items of coastal improved stow net fishery such as the captain’s age, the captain’s career, the age of fishing vessel, the fishing nets in use, the crews on board and the operation days per voyage by region, the average captain’s age was 55.7 years, the average captain’s career was 20.5 years, the average age of fishing vessels was 9.0 years, the average numbers of nets used by fishing boats was 14.0 sets, the average numbers of crew on board a fishing boat was 4.4 persons and the average numbers of operation days per voyage was 4.9 days (p < 0.05). As a result of the survey on safety factors during fishing operations, such as experience of ship accidents, major causes of ship accidents experienced, causes of ship accidents (first priority), experience of human accidents, major causes of human accidents, and causes of human accidents (first priority), more than 96% of the respondents experienced ship accidents including collisions with other vessels or fishing gear during fishing operations. The most significant cause of the accident was the other’s fishing gear installed in the fishing grounds. The first possible causes of ship accidents during fishing operations were found to be other fishing gear installed in fishing grounds, steering or engine failure, and inability to avoid accidents during casting and hauling nets. The survey of the experience of human accidents, such as injuries or sea falls, showed that more than 90% of the respondents experienced human accidents during fishing operations. The most important cause of accidents experienced during fishing operations was stucked in a fishing gear during casting and hauling nets. The first important causes of accidents during fishing operations were movement of the fishing gear during casting and hauling nets, damage of the fishing gear such as rope cutting. The results are expected to be provided as a basic data to prevent safety accidents occurring during fishing operation and improve the fishing system in the coastal improved stow net fishery.

This study aimed to analyze the economic feasibility of the reduction of working safety accidents in stow net fishery through the prevention education to fishing crews. The benefit was evaluated by estimating insurance payment amount that was reduced through prevention education. The decreasing rate of working safety accidents was presumed to follow the experience in Japan. The cost was assumed as the cost of textbook development. Results indicated that IRR was estimated to be 79.9% in case of scenario assuming no additional operating costs while IRR was 56.3% in case of scenario assuming 10% additional operating costs. In addition, the economic feasibility would be secured when annual operating costs increased to 274 million won according to the result of sensitivity analysis.

This study collected and analyzed the fishing process of existing fishing boat and newly built fishing boat by using the video observation methods to understand the improvement of fishing operation efficiency and safety according to the scale change of coastal composite fishing boat. The fishing operation efficiency was calculated by analyzing the frequency of movement, the movement distance and the moving time per basket used in the fishing process to derive the improvement of the newly built fishing boat compared to the existing fishing boat. It was confirmed that the mean frequency of movements decreased to 13.9%, the average moving time decreased to 21.8%, the mean movement distance increased to 20.5% and the movement through the top of gunwale did not occur. Movement of frequency, increased and time according to the fishing operation were directly affected by the width of side passages and the presence or absence of walking obstruction such as bulwark stay, hatch coaming and fishing gears on deck. The results of this study are expected to be used as basic data for redesigning into a safe and efficient coastal composite fishing boat in the future.

2011년 12월 중국어선의불법어업을 단속하는 과정에서 중국인 선장이 휘두 른 흉기에 의해 대한민국 해경이 사망하는 사고가 발생하면서 단속이 강화되고 검찰이 석방 담보금을 상향하는 등 우리 정부의 적극적 대응에 따라 중국어선 의 불법어업이 잠시 잦아드는 듯하였다. 또한, 2008년 해상공권력 강화대책, 2011년 불법어업 근절 종합대책뿐만 아 니라, 2012년에는 해양경비법을 제정하여 불법어업 단속을 위한 추적 및 나포, 무기 사용 요건 등을 정립하였다. 그러나 세월호 참사로 해경이 사고 수습에 매진하고 있는 가운데 중국어선이 이 틈을 타 불법행위를 일삼는 것은 물론, 최근까지 통계자료를 살펴보아도 중국어선의 불법어업은 줄어들기는커녕 일정한 수준을 유지하거나 오히려 증가하고 있는 추세이다. 특히 중국어선의 불법 어업은 서해 우리 측 배타적 경제수역(Exclusive Economic Zone : EEZ)과 심 지어 우리 영해에서 발생하고 있다는 점에서 재발 방지를 위한 대책마련이 시 급하다. 그런데 중국에서는 수산물 소비량이 급증한 반면 급속한 공업화로 인한 연 안오염과 무분별한 남획으로 인한 수산·어업자원의 고갈, 불법어업행위로 단속 되더라도 3대 엄중위반행위를 제외하면 담보금만 납부하고 어획물을 반환받아 처분하는 게 경제적 이익이라는 인식 등으로 대한민국 EEZ와 영해 내에서 중 국어선의 불법어업은 근절되지 않고 있다. 이처럼 인명피해 뿐아니라 국가적 마찰을 초래하는 중국어선의 불법어업을 근절하기 위해서는 현행 체제에 대한 미비점을 찾고 개선방안 및 발전방향을 도출하여야 할 것이며, 기존의 법률적 근거가 없는 새로운 조치사항들은 따로 제정하거나 보완하는 등의 방법으로 최소한의 법적 근거를 마련하여야 할 것으 로 생각된다. 법령의 효율적 집행과 정비는 물론 단속경찰관의 안전장비 및 진 압장비의 보강과 정부차원의 외교적 노력 또한 뒷받침되어야 할 것이다. 따라 서 이 논문에서는 중국어선의 불법어업 현황과 증가원인을 규명하고, 불법어업 의 근절 및 단속환경 개선을 위한 구체적 방안을 검토한다.

For providing a basic data concerning with a fishing deck layout design of a trawler the authors conducted the video observations about the working activities of crews on the deck in the different layout of two Korean coastal large stern trawlers (gross tonnage: 139). The winch of the trawler-A was installed on the aft of the fishing deck and the trawler-B, on the forward of the fishing deck. The work and activities of the deck hands on both trawlers were observed using the CCD (charge coupled device) camera installed on each trawler's deck for one month from August 3, 2010. The video data was analyzed by the hierarchical task analysis (HTA) method. In results, numbers of tasks to require deck hands during the hauling net and the casting net were 25 and 28 for the trawler-A and 27 and 48 for the trawler-B, respectively. The working processes were represented a same in both of the trawlers. Location for controlling the deck machineries, the location installed trawl winch, kinds of deck machineries, crew's custom for using deck machineries were the factor affecting to the number of the task. In the case of the improvement suggested in the results is carried out, the reduction percentages of the number of task in the trawler-A and trawler-B were estimated as 24.5% and 51.3%, respectively. Through this study it was found that the quantitative analysis is possible for the work processes, work methods and the work contents in the trawler. Also the suggestion for improving the fishing deck layout design of the trawler was possible by finding out the factors increasing the number of tasks and removing the tasks. We expect that the results of this paper are used as a basic data for designing the layout of deck machineries in the trawler in the future.

As the basic study about improvement of yellow croaker drift gill net fishing implement and development of the fishing system, this study drew problem after synthetically analyzing hauling system of yellow croaker drift gill net used in the coast of Chuja Island and tested several characters and analyzed in hauling process with 5 step net hauler model for improving the problem. The analysis results are as follows. When the angle between axises of drum centers was small, it showed the tendency that hauling time was fast. Hauling time was faster when drum was 5 step rather than 3 step. When drum was 5 step, slippery phenomenon was small and hauling was stable. Tension was larger when drum was 5 step rather than 3 step. When drum was 5 step, the range of change of the maximum and minimum value was small and hauling was stable. When drum was 3 step, there was following formula between hauling time (Ht3) and angle between axises of drum centers (Ag) Ht3 : (7.15Hs-0.81) Ag-0.81, when drum was 5 step there was following formula.Ht5 : (6.45Hs-0.75) Ag0.10, here, Hs is hauling speed. When drum was 3 step and hauling speed was 28cm/sec, tension was T=0.08A83-1.60Ag3-0.49Ag+369.56(r=0.99), when drum was 5 step, tension was, T=-0.01Ag3+1.96Ag2-34.05Ag+414.58 (r-0.99), here, T was tension(g).

This study was carried out to observe the underwater geometry of the anchovy boat seine by two fishing operation systems. One was a traditional operation system that used a fish detecting boat, another was a new operation system that used the same fishing gear with floats and sinkers in comparison with a fish detecting boat. Vertical opening of the fishing gear that used a casting net, working depth of each part of the fishing gear that used a new operation system was almost canstant, but was gradually shallow in a traditional operation system. Just before hauling net, working depth of each part of the fishing gear that used a new operation system was maintained stable, but was vertically unstable in a traditional operation system because as rear part of the fishing gear was risen up the upper layer. Just after hauling net, working depth of the fishing gear that used a new operation system was also maintained stable, and then anchovy school could be lead to bag net.

어구 크기를 대폭적으로 줄이면서 어획성능을 향상시킨 어구를 개량하고 조업자동화를 이룩할 수 있도록 하기 위하여 신광수산에서 사용하고 있는 실물어구를 가지고 양선간격 및 예망속도의 변화에 따른 해상실험을 통하여 어구 각부의 망고와 수중형상을 측정·분석한 결과를 요약하면 다음과 같다. 1. 실물어구 각 부분의 망고는 양선간격과 예망속도가 증가함에 따라 낮아지는 경향을 보였다. 2. 실물어구의 양선간격에 따른 오비기, 수비, 앞창, 자루 입구, 깔때기와 자루 뒤끝의 망고는 각각 8.4∼6.6, 17.4∼15.7, 17.9∼12.9, 19.0∼l3.6, 8.4∼8.3, 14.7∼11.1m이었고, 각 부분의 전개율은 16∼12, 24∼22, 38∼27, 83∼59, 93∼92, 54∼41%로 나타났다. 3. 실물어구의 예망속도에 따른 오비기, 수비, 앞창, 자루 입구, 깔때기, 자루 뒤끝의 망고는 각각 10.5∼7.7, 21.6∼l9.6, 16.9∼15.2, 17.1∼15.4, 8.2∼8.0, 14.7∼13.7m이었고, 각 부분의 전개율은 각각 19∼14, 30∼27, 36∼32, 74∼67, 91∼89, 54∼51%로 나타났다. 4. 오비기의 망고가 매우 낮게 형성되어 수비와 앞창의 망고가 불안정하고 극히 낮은 전개율로 인하여 포켓현상이 매우 뚜렷하게 나타났다. 5. 실물어구의 예망깊이는 양선간격과 예망속도의 증가에 따라 약간씩 말아지는 현상을 보였는데, 뜸줄 쪽보다는 발줄 쪽이 더 뚜렷하였다.

1999년 5월 29일부터 6월 30일까지의 남해안에서의 수심에 따른 수중광의 변화와 조업시간의 경과에 따른 예망 상대유속을 측정하고, 권현망어구에 대한 체장 4~7cm정도 되는 멸치들의 도피 반응행동을 관찰하고 분석한 결과는 다음과 같다. 1) 남해안 통영, 거제 부근 멸치어장에서 수심에 대한 수중광의 변화를 자연대수 곡선식으로 나타내면 광흡수 계수 c는 대표적인 관측점에서 주로 0.24~1.03 범위로 나타나서, 멸치의 어구에 대한 시인도가 어장에 따라 클 것으로 보인다. 2) 권현망어구의 원형그물과 1/2축소그물의 자루그물 입구부분의 상대유속을 기준으로 할때, 수비와 자루의 연결부분의 유속비는 평균 1.46, 자루부분의 유속비는 평균 0.67로 나타나서, 어구의 부위에 따른 상대유속변화가 멸치의 유영운동과 도피운동에 영향을 줄 것으로 보인다. 축소된 권형망어구에 있어서의 멸치의 대망행동을 관찰한 결과 수비와 자루연결부분에서 빠져나가는 1분당 멸치도피수는 평균 455미 정도였으며, 자루의 앞에서 예인방향으로 유영하는 깔대기를 빠져나가는 1분당 멸치도피 수는 평균 308미 정도로 나타나서, 어구 전체적으로는 상당수의 멸치들이 능동적인 도피행동을 나타내는 것으로 추측된다.

기선권현망 어구를 대폭적으로 줄이여 어획 성능을 향상시킨 어구를 개량하고 자동화 조업시스템을 개발하기 위하여 현재 사용중인 어구를 1/2로 축소 제작한 시험어구를 가지고 양선간격과 예망속도의 변화에 따른 해상실험을 통하여 어구 각부의 망고와 수중형상을 측정.분석한 결과를 요약하면 다음과 같다. 1. 시험어구 각 부분의 망고는 양선간격과 예망 속도가 증가함에 따라 낮아지는 경향을 보였다. 2. 시험어구 A의 양선간격에 따른 오비기, 수비, 앞창, 자루 입구, 깔때기와 자루 뒤끝의 망고는 각각 10.8∼9.0, 12.0∼8.3, 12.6∼9.0, 10.4∼6.6, 4.6∼5.2, 8.8∼7.7m이었고, 각 부분의 전개율은 각각 36∼30, 21∼15, 31∼22, 80∼51, 80∼96, 59∼5l%로 나타났다. 3. 시험어구 B의 양선간격에 따른 오비기, 수비, 앞창, 자루 입구, 깔때기와 자루 뒤끝의 망고는 각각 9.1∼8.5, 9.8∼6.5, 11.2∼8.0, 11.0∼8.1, 4.7∼5.0, 7.0∼7.5m이었고, 각 부분의 전개율은 각각 30∼28, 18∼12, 27∼20, 85∼62, 87∼93, 47∼50%로 나타나 자루 입구와 깔대기 부분에서는 시험어구 A보다 다소 전개가 양호하였으나 다른 부분에서 약간 불량하였다. 4. 시험어구 A, B의 예망속도에 따른 각 부분의 망고는 양선간격에서와 거의 같았으나 변화폭은 다소 작았다. 5. 오비기와 수비 부분의 전개율이 30%정도로 매우 작기 때문에 포켓현상이 뚜렷하게 나타났다. 6. 모형어구 A의 수중형상은 양선간격과 예망속도가 증가에 따라 뒤 부분이 들리는 경향을 보인 반면에 시험어구 B는 거의 일정하였다. 7. 시험어구 A와 B의 예망깊이는 양선간격과 예망속도가 증가함에 따라 약간씩 얕아지는 현상을 보였는데, 뜸줄 쪽보다는 발줄 쪽이 뚜렷하다.