In this study, a numerical analysis study was conducted on the flow characteristics according to the internal flow path change and differential pressure of the hydrogen shut-off valve, and through this, the pressure loss characteristics and flow coefficient of the hydrogen shut-off valve were predicted. ANSYS CFX program was used to predict the flow characteristics of the hydrogen shut-off valve. When the flow path gap was 1.3 mm, the design conditions of the hydrogen shut-off valve were satisfied, and the value of the flow coefficient of the valve was about 1.53. As the inlet pressure of the hydrogen shut-off valve increases, the outlet flow rate increases, but regardless of the inlet pressure, the flow coefficient of the valve is almost constant, ranging from 1.53 to 1.56, indicating that it is the inherent flow coefficient of the designed hydrogen shut-off valve.

This study focused on how retail tech promotes differentiated customer experiences in offline fashion stores. The purpose of this study is to determine the effects of the characteristics of fashion retail tech stores on consumers’ flow and satisfaction. We surveyed Koreans aged 10 to 50 who had experienced offline fashion retail tech stores. The survey was conducted from April 28, 2023, to May 21, 2023. The total number of survey respondents was 200. The quantitative data collected through questionnaires was analyzed using SPSS 25.0. To reveal the effects of fashion retail tech store characteristics on consumer’s flow and satisfaction, frequency analysis, we conducted frequency analysis, factor analysis, reliability analysis, correlation analysis, and regression analysis. The results of this study, figured out that fashion retail tech store’s characteristics, including playfulness, efficiency, interaction, and information provision, have a significant impact on behavior flow, emotional flow, and satisfaction. As a result of analyzing the influence of consumers’ flow led to satisfaction, it was confirmed that emotional flow positively influenced satisfaction, but behavioral flow had no meaningful effect on satisfaction. The results of our study can be used to make a successful marketing strategy and can serve as foundational data for consumer research on retail-tech-applied offline fashion stores.

A spiral flow path was applied to solve the problem of the existing straight flow path in the leveling shaft, a key component of the self-levelizer that can maintain the height according to the change in payload in EV, SUV. In this study, flow analysis was performed to check the velocity, pressure drop, and flow direction of oil according to the main operating conditions of the leveling shaft with a spiral flow path. As a result of the study, a leveling shaft with a spiral flow path is likely to improve fluid properties around the orifice and inlet valve under compression conditions, and it is judged to have a development application effect.

This study analyzed the flow inside floating seedling equipment for Scapharca subcrenata. Due to the aging society of fishing villages, it is impossible to continuously input the labor force. Therefore, it is necessary to improve efficiency. Scapharca subcrenata has high per capita consumption. It serves as an important aquatic food resource. Scapharca subcrenata culture tends to be highly dependent on the natural environment. Production of Scapharca subcrenata is difficult to predict with low stability. In the past, manpower directly installed bamboo nets in mudflats. The seedling equipment devised in this study is a floating type and can be freely moved on the sea according to the prediction of Scapharca subcrenata generation. The flow around the floating seedling equipment was analyzed by numerical analysis. The physical phenomena of the flow around the net inside the floating seedling equipment were visualized. As a result, the space between the floating seedling equipment and the bottom net and the space between the net groups showed a lower flow rate than the inlet flow rate. It is expected that the low flow rate of the floating seedling equipment will have a positive effect on the attachment of Scapharca subcrenata.

The shell & tube-type heat exchanger has been frequently used because it shows simple structure, easy manufacturing and wide operation conditions among many heat exchangers. This study aims to investigate the characteristics for thermal flow of coolant and the possibility of damage for tube equipped with shell due to thermal stress. For these purposes, The thermal flow of coolant in tube was simulated using ANSYS-CFX program and thus the behaviors of coolant were evaluated with standard k-ε turbulence model. As the results, as the flow rate of coolant in tube was increased, the mean relative pressure was also increased with quadratic curve, however, as the surface temperature of tube was increased, mean temperature difference was linearly increased. Finally it showed that the damage of tube could be predicted, that is, which tube was the most weak due to thermal stress.

본 연구에서는 대마난류(Tsushima Warm Current, TWC)의 유동 변화에 영향을 주는 요소를 파악하기 위하여 TWC의 수송량과 태 평양 순년진동(Pacific Decadal Oscillation, PDO) 및 엘니뇨 남방진동(El Niño - Southern Oscillation, ENSO)의 상호 관계 분석을 실시하였다. 25 년(1993~2018년) 동안의 TWC의 월별 수송량을 계산해보면 하계에 가장 크고 동계에 가장 작게 나타나는 계절변동 주기가 뚜렷하다. TWC 수송량과 PDO 및 ENSO의 한 척도인 Oceanic Niño Index(ONI) 각각의 주기성 파악을 위한 power spectrum 분석결과, TWC 수송량은 1년 주기 에서 peak를 보이지만 PDO 및 ONI는 뚜렷한 주기가 나타나지 않았다. 또한, TWC 수송량과 PDO 및 ONI의 상호 관계 파악을 위해 coherence 추정 방법을 이용하여 분석하였다. PDO 및 ONI의 coherence는 3년 이상의 장주기 변동에서 상호 기여도가 높으나 1년 이내의 단주기 변동 에서는 상호 기여도가 낮다. 그러나 TWC 수송량과 PDO 두 요소 간 0.8~1.2년 주기에서 coherence 값은 0.7로 상호 기여도가 높다. 한편 서수 도를 통과하는 TWC 수송량과 PDO는 Ⅰ기간(1993~2002년)과 Ⅲ기간(2010~2018년)에 역상관 관계성을 가진다. TWC 최대 수송량 (2.2 Sv 이 상)이 높게 나타나는 시기에 PDO 지수가 –1.0 이하의 음의 값, 2.2 Sv 이하로 작은 시기에 PDO 지수가 양의 값을 나타낸다. 따라서 장기적 인 PDO 지수 자료를 이용하면 TWC 수송량 변동 및 동해 연안역의 수온변화를 예측 또한 가능할 것으로 판단된다.

In this study, two ventilation holes were considered to prevent condensation in the circular column supporting the provision crane on a training ship(Saenuri) for Mokpo National Maritime University. The ventilation holes could be understood as the most simple and inexpensive way to prevent condensation because it was formed only by drilling. If sufficient ventilation is provided, the insulation and corrosion of an electric motor can be improved, and a comfortable state can be ensured in the circular column. The circular column had an electric motor for driving the provision crane so that the basic principle was to utilize the kinetic energy for the flow field from a cooling fan in the circular column. The ventilation holes attenuated the low-velocity area in the circular column and contributed to internal flow circulation with updrafts. The results were discussed through numerical analysis based on computational fluid dynamics.

Carbon fibers are commonly used in many specialized, high-performance applications such as race cars and aircraft due to their lightweight and high durability. The most important stage in the production of carbon fibers is the carbonization process. During this process, carbon fibers are subjected to high temperatures in the absence of oxygen to prevent fibers from burning. Labyrinth seals are attached to a carbonization furnace to prevent airflow into the furnace and to assist in the elimination of off-gases. This study investigated flow characteristics inside a carbonization furnace and the effects of different geometric parameters of labyrinth seals such as labyrinth tooth shape, number of teeth, and tooth clearance. Varying carbonization furnace operating conditions were also studied in regard to flow behavior, including fiber movement and outlet vacuum pressure. A high working gas flow rate at the furnace inlet resulted in recirculation zones. Properly regulated gas flow from the main and labyrinth inlets enabled uniform flow around the fibers’ inlet and outlet which prevented air from being trapped in the reactor. Flow behavior was minimally effected by changes to labyrinth seal geometry such as tooth length, tooth clearance, and outlet pressure. However, the movement of fibers had a clear effect on flow characteristics in the furnace.

In this study, numerical analysis is conducted to investigate the flow characteristics of a turning type flood gate fishway with various design factors. The shapes of the fishway are circular and rectangular type. Baffles are installed to reduce the velocity in the fishway, and the gap and rotational arrangement of the baffles are set as design factors. To reduce the maximum velocity, a cavity-shaped break region is installed to examine the flow characteristics according to the presence of the break region. As a result, in the condition where the shape of the fishway is rectangular, the outlet average flow velocity is larger than that in the circular condition. The highest flow velocity occurs when the baffle is rotated in 90-degree arrangement. As the baffle gap increases, the average velocity increases. The cavity-shaped break region creates a recirculation zone in the fishway, and as a result, shows a decrease in the maximum velocity of up to 5.8%.

국제해사기구(IMO)의 온실가스(GHG) 감축 전략과 같은 환경규제를 강화함에 따라 친환경 선박 및 대체 연료 등 기술 개발이 확대되고 있다. 그의 일환으로 해운사와 조선사를 중심으로 에너지 저감과 풍력 추진 기술을 활용한 선박 추진 기술이 대두되고 있다. 풍 력 추진 기술의 확보와 실증 연구를 조선 및 해운 분야에 도입함으로써 친환경 기술을 활용한 고부가가치 시장을 창출할 수 있으며, 운항 선박의 연료 소비율을 줄임으로써 연비를 약 6~8 % 정도 향상시켜 GHG의 감축을 기대할 수 있다. 로터 세일(Rotor Sail, RS) 기술은 원형 실린더가 일정한 속도로 회전하여 유체를 통과할 때 실린더의 수직 방향으로 유체역학적 힘을 발생시키는 기술이다. 이를 마그누스 효과 (Magnus Effect)라고 하며, 본 연구에서는 선박에 설치된 풍력보조추진 시스템인 RS 주위의 난류 유동특성에 관한 수치해석적 연구를 통하 여 추진효율을 높일 수 있는 방안을 제시하고자 하였다. 그래서 RS의 공기 역학적 힘에 영향을 미치는 매개변수로써 속도비(Spin Ratio, SR)와 종횡비(Aspect Ratio, AR) 변화에 따른 양력계수( )와 항력계수( )를 도출하였고, RS 끝단 플레이트(End Plate, EP) 적용에 따른 RS 주변 유동특성을 비교하였다.

Flow prediction was carried out through observational survey and three dimensional multi-layered numerical diagnostic model experiment to clarify the time and spatial structure of tidal current and residual flow dominant in the sea exchange and material circulation of the waters around Geumo Islands in the southern waters of Korea. The horizontal variation of tidal current is so large that it causes asymmetric tidal mixing due to horizontal eddies and the topographical effect creating convergence and dispersion of flow direction and velocity. Due to strong tidal currents flowing northwest-southeast, counterclockwise and clockwise eddies are formed on the left and right sides of the south of Sori Island. These topographical eddies are created by horizontal turbulence and bottom friction causing nonlinear effects. Baroclinic density flows are less than 5 cm/s at coastal area in summer and the entire sea area in winter. The wind driven currents assuming summer and winter seasonal winds are also less than 5 cm/s and the current flow rate is high in winter. Density current in summer and wind driven current in winter have a relatively greater effect on the net residual flows (tidal residual current + density current + density driven current) around Geumo Islands Sea area.

Small-sized heater is usually used to make the hot water in resting place, factory, household affairs and so on. One of methods to obtain hot water in short time is known as using instantaneous electric water heater. In this study, numerical analysis for small-sized hot water heater with straight double tube-type was tried to achieve the basic design data. This study aims to investigate the characteristics of thermal flow, for instance, such as pressure difference, outlet mean temperature and velocity, due to clearance. As the clearance is decreased, outlet mean temperature and pressure difference(Pmax.-Pmin.) are increased. Therefore appropriate relations between area of heat source and pressure difference should be set up. Further small-sized hot water heater in this study must be equipped with electric device capable of heating over 90℃.

Numerical analysis for flow and noise characteristics of sirocco fan design factors is conducted in this study. 4 cases of blade angle(α=24°~30°) and 5 cases of RPM(390~1170RPM) are calculated. Flow characteristics are compared for the number of blades. Outlet flow rate is tended to decrease as the number of blades increased. There is little difference in the flow characteristics for the angle of blade. The highest outlet flow rate is predicted at α=24°, and the lowest at α=28°. Flow and noise characteristics are compared for α=24° and 26°. Outlet flow rate is almost similar in both cases, but noise for α=24° is predicted higher at high RPM conditions.

An important variable in the oil-water separation process is the size and dispersion diagram of the bubbles formed in the induced gas flotation(IGF). In this study, the influence of the behavior and characteristics of the fine bubbles generated in the IGF device on the oil-water separation performance was evaluated by a numerical analysis method. For this reason, it constitutes Grid system suitable for bubble characteristic analysis. By applying Reynolds-averaged Navier-Stokes equations, a continuous abnormal flow analysis model of water and air was established. For the numerical flow analysis model, we applied the Eulerian-Eulerian approach that can be used for the reaction model in which bubbles are formed at one point of the Euler method applied when the base is liquid. As a result, it was confirmed that the bubbles in the IGF device were evenly dispersed as the flow velocity of bubbles increased and the particle size decreased. Such a phenomenon was caused by changes in Reynolds number and drag related to the flow characteristics, and could be explained by Stokes' law of viscosity.