Benthic attached diatoms (BADs), a major primary producer in lotic stream and river ecosystems are micro-sized organisms and require a highly magnified microscopic technique in the observation work. Thus, it is often not easy to ensure accuracy and precision in both qualitative and quantitative analyses. This study proposed a new technique applicable to improve quality control of aquatic ecosystem monitoring and assessment using BADs. In order to meet the purpose of quality control, we developed a permanent mounting slide technique which can be used for both qualitative and quantitative analyses simultaneously. We designed specimens with the combination of grid on both cover and slide glasses and compared their efficiency. As a result of observation and counting of BADs, the slide glass designed with the color-lined grid showed the highest efficiency compared to other test conditions. We expect that the method developed in this study could be effectively used to analyze BADs and contributed to improve the quality control in aquatic ecosystem health monitoring and assessment.

국내에 호박을 가해하는 두 과실파리는 Zeugodacus 속으로 분류된다. 호박꽃과실파리(Z. scutellata) 수컷은 큐루어(Cuelure)에 유인되어 포장에서 이 과실파리의 발생을 모니터링 하는 데 이용된다. 이에 반해, 호박과실파리(Z. depressa) 수컷을 유인하는 물질은 아직 알려지지 않았 다. 단백질 먹이 유인제가 대부분의 과실파리를 유인하게 되는데 여기에 terpinyl acetate (TA)를 추가하여 호박과실파리의 유인력을 높였다. 본 연구는 TA-단백질먹이 유인제를 이용하여 호박 재배지에서 호박과실파리의 연중 발생을 모니터링 하는 데 목적을 두었다. TA-단백질먹이 유인제의 효율성을 증명하기 위해 호박꽃과실파리를 대상으로 큐루어와 TA-단백질먹이 유인제를 이용하여 2019년 한 해 동안 발생을 모니터링하고 이 두 유인제로 얻어진 연중 모니터링 자료를 비교하였다. 두 유인제를 이용한 호박꽃과실파리의 연중 발생 패턴은 10월 하순을 제외하면 유사하였다. TA-단백질먹이 유인제는 10월 하순 시기에도 지속적인 호박꽃과실파리의 포획을 보였는데 이는 9월 하순 이후 호박꽃과실파리의 성충 휴면 유기에 따른 유인 행동 차이로 이해되고 있다. TA-단백질먹이 유인제를 이용한 호박과실파리의 연중 모니터링은 크게 두 개의 발생 최성기를 보여 하나는 7월 중순이고 다른 하나는 8～9월에 나타나며 포획된 개체들의 80% 이상이 암컷이었다. 이러한 TA-단백질먹이 유인제의 두 과실 파리류에 대한 유인 효과를 바탕으로 스피노사드(spinosad) 살충제를 가미한 수화제를 제조하고 호박 재배지에 살포하였다. 처리 7 일경과 후 약 70% 이상의 방제 효과를 기록하였다. 그러나 이 방제 효과는 처리 이후 기간이 경과하면서 낮아지는 경향을 나타냈다. 이상의 결과는 TA-단 백질먹이 유인제를 이용하여 야외 호박 재배지에서 호박과실파리의 연중 모니터링이 가능하다는 것을 보여 주었다. 또한 스피노사드를 가미한 TA-단백질먹이 유살제가 이들 호박과실파리류 방제에 응용될 수 있다는 것을 제시하고 있다.

국내 고도성장기 이후 본격 건설되기 시작한 사회 기반 시설물은 노후화가 빠르게 진행되고 있다. 특히 사고 발생 시 대량 인명 피해로 직결될 수 있는 교량, 터널 등의 대형 구조물들에 대한 안전성 평가가 필요하다. 하지만, 기존의 유선 센서 기반의 SHM을 개선한 무선 스마트 센서네트워크는 짧은 신호도달거리로 인해 경제적이고 효율적인 시스템 구축이 힘들다. 따라서 LoRa LPWAN시스템은 사물인터넷의 확산과 더불어 저전력 장거리통신이 각광을 받고 있으며, 이를 구조건전성 모니터링에 응용함으로써 경제적이면서도 효율적인 SHM 구축이 가능하다. 본 연구에서는 LoRa LPWAN의 구조건전성 모니터링에 적용 가능성을 검토하고 비면허 통신 대역을 사용함으로 인해 발생하는 채널간의 충돌을 해결하면서 대역폭을 효율적으로 활용할 수 있는 채널 기반의 LoRa 네트워크 운영방법을 제안한다.

Applicability of corrosion inhibitor was evaluated using pilot scale water distribution pipe simulator. Calcium hydroxide was used as corrosion inhibitor and the corrosion indices of the water were investigated. Corrosion indices, Langelier saturation index (LI) increased by 0.8 and calcium carbonate precipitation potential (CCPP) increased by 9.8 mg/L. This indicated that corrosivity of water decreased by corrosion inhibitor and the effects lasted for 18 days. Optimum calcium hydroxide dose was found to be 3~5 mg/L for corrosion inhibition. We suggest that monitoring of CCPP as well as LI need to be conducted to control corrosivity of water.

This study was carried out to develop the technology to manage the growth management of mushroom which was cultivated by long-term knowledge based on the quantified data. In this study, it was developed hardware to monitor and control the growth environment of mushroom cultivation house and an algorithm to automatically grow mushroom. Environmental management for the growth of mushrooms was made possible by cultivation sites, computers and smart phones. In order to manage the environment of mushroom cultivation house, environmental management data of farmers cultivating the highest quality mushrooms in Korea was collected, and a growth management database was created based on the collected data. The management environment for the mushroom cultivation was controlled at ±0.5 °C for temperature, 7 % for upper limit and 3 % for lower limit for relative humidity, and ±10% level for carbon dioxide concentration based on database value. As a result of cultivating mushrooms in such an environment, it was possible to produce mushrooms at almost the same level as those cultivated in farms with the best technology. Therefore, it was considered that the environmental management of the mushroom house managed by the technology based on the long experience could be managed based on the sensor data.

This study was carried out to develop the technology to manage the growth of mushrooms, which were cultivated based on long-term information obtained from quantified data. In this study, hardware that monitored and controlled the growth environment of the mushroom cultivation house was developed. An algorithm was also developed to grow mushrooms automatically. Environmental management for the growth of mushrooms was carried out using cultivation sites, computers, and smart phones. To manage the environment of the mushroom cultivation house, the environmental management data from farmers cultivating the highest quality mushrooms in Korea were collected and a growth management database was created. On the basis of the database value, the management environment for the test cultivar (hukthali) was controlled at 0.5 °C with 3–7% relative humidity and 10% carbon dioxide concentration. As a result, it was possible to produce mushrooms that were almost similar to those cultivated in farms with the best available technology.

The Asian tiger mosquito, Aedes albopictus, is considered as potential vector of Zika virus in Republic of Korea (ROK). Vector control during mosquito season is one of critical factors for decline of viral transmission. Total 14 oversea travel-associated Zika cases by mosquito bite were reported throughout ROK from January to September 2016 and vector control and monitoring at surroundings of patient’s residences was carried out during three weeks after confirmation of the virus. Although population density rates of Ae. albopictus were remarkably various according to ecological surroundings, population density of Ae. albopictus near forest was higher than urban. All captured Aedes mosquitoes were used for detection of three flavivirus, Zika, Dengue and Chikunguya, using RT-PCR and any virus was not detected. Population density of Ae. albopictus decreased > 65% on average after vector control and in one area > 95% of population density decreased. Our data might reveal that vector monitoring and control at surroundings near residences of oversea travel-associated Zika patients might effectively prevent viral transmission by mosquito bite and naturalization of the virus in ROK.

At this study, we are developing a possible control system through remote monitoring for fire protection in various chemical factory facilities. It's possible to do real time confirmation of a normal operation presence of the various equipment installed in a chemical factory through the internet network at a fire fighting head office, an area fire department and a chemical factory situation room using this remote monitoring control system. When occurring, abnormal operation is the remote monitoring control system, which can check this immediately and notify the situation room administrator. After it was tested using developed remote monitoring control system, the remote monitoring for which the internet network was used confirmed possible.

This paper presents several control charts for safety and environmental performance monitoring. We also propose guidelines that control charts for statistical process control can be used for safety and environmental performance evaluation.

With the development of CNC(Computer Numerical Control) and communication technology, the connotation and functions of Distributed Numerical Control have been greatly enlarged. In this study, we develop and implement a Distributed Numerical Control system that has real time and multi-tasking operation capability for the machining cell with various NC(Numerical Control) and CNC machines. With the consideration of economy, generalization and extension, this system is interfaced with Shop Floor Control System, Machine Control System and Tool Preparation System using advanced networking method. In the implementation phase, we use the ORACLE DBMS (Database Management System) as the DBMS and Microsoft Visual C++ as the programming tools.

Automated manufacturing systems are applied to shop floors as tools for increase of productivity and quality and the decrease of manufacturing lead times and industry accidents. One of the most important issue of the present day is the application of Internet. The development of Internet technologies makes manufacturing enterprises break spacial barriers between users and shop floors, and collect various field data in remote sites. In this research, an Internet-based remote control system for a small-sized automated storage and retrieval system is developed for the purpose of real-time monitoring and control of automatic production equipment. The developed system has a client-server architecture and sends real-time images of the automated storage and retrieval system to clients by an CCD camera connected to a server.

This study presented problems and improvements in the quality control of an air monitoring network, using Gyeongnam as an example. 1) The effective utilization rate of the air monitoring was 95%, which showed good management, but the maximum of 2% was indicated by zero or detection limit among measurement data. 2) In the equivalence evaluation of PM2.5, the slope and intercept satisfy the evaluation criteria; however, 1% of the PM2.5/PM10 ratios were outliers. 3) All air monitoring stations meet the quality control standards; however, the management status is added to the quality inspection, management system is unified and the related budget is expanded, and systematic commission management is required.

The traffic of tug/barges which are carrying construction materials, large plants for harbor development, or offshore structures has recently increased in the coast of Korea. The west and south coast of Korea are always congested due to a lot of islands and traffic concentration. Specially tug/barges have higher probability of marine accidents due to their bad maneuverability than others. Considering the operational circumstance and maneuverability, this study was to develop a wide-area monitoring and control system for tug/barges in the coastal area of Korea. The system was made in the form of three program modules i.e. navigation analysis program module, monitoring and control program module, database module. And seven functions were programmed to monitor and control the tug/barges efficiently. These are ship information search, tug/barge information and track management, designated area and safe navigation zone management, fairway management, accident data management, warning of danger, safety information management.