For the Floating Photovoltaic development project, economic analysis is conducted by predicting the amount of power generation in consideration of climate factors. Among the climate factors, the outside temperature increases the temperature of the module. As a result, the efficiency of the module is reduced. Due to global warming, the outside temperature is rising every year, when estimating the amount of power generation over the next 20 years, a more accurate prediction will be possible only when considering the temperature rise.

This study aimed to investigate the effects of amino acid complex additives, such as protected vitamin C (VC) or detoxified sulfur (DS), on the growth and metabolism of Hanwoo cattle under high-temperature conditions. Accordingly, farms in Temperature-Humidity Index (THI) regions ranging from 78 to 89 for over 100 days were selected. The experimental groups were control, T1 (lysine + methionine + VC, 50 g/head/day), and T2 (lysine + methionine + DS, 50 g/head/day) with 70, 77, and 71 animals each. The range of the THI for 115 days was 78-89, and this occurred in most of the experiment days. The results showed that there was no significant difference in rectal temperature among the groups. The body weight increased to 786.4 and 809.0kg in the T1 and T2 groups, respectively, compared to the control group (p<0.05). Linoleic acid showed a high result of 2.01% in the T1 group compared to the control group (p<0.05). Unsaturated fatty acids were higher at 55.70 and 56.54% in the T1 and T2 groups, respectively, compared to the control group (p<0.05), and the omega 6/3 ratio was reduced to 20.10% (p<0.05). These findings indicate that T1 has a positive impact on growth, meat quality, and fatty acid composition compared to the control group. In conclusion, amino acid complex with VC improved the body weight of Hanwoo steers and the unsaturated fatty acids and essential amino acids of their meat; however, further research is needed to clarify this impact on carcass performance.

The effects of exogenous sodium nitroprusside (SNP, nitric oxide donor) on the growth, yield, photosynthetic characteristics, and antioxidant enzyme activity of kimchi cabbage (Brassica rapa L. subsp. pekinensis (Lour.) Hanelt) was studied under the low temperature conditions. Kimchi cabbages were treated with SNP of three concentrations (7.5, 15, 30 mg·L-1) for three times at four-day intervals and exposed to low temperature (16/7°C) stress for seven days. SNP treatment induced increases of net photosynthetic rate (Pn), stomatal conductance (Gs), intracellular CO2 concentration (Ci) and transpiration rate (Tr) under the stress condition with the highest level after the third treatment. The contents of malondialdehyde (MDA) and H2O2 were significantly lower in the treatment of SNP compared to the non-treated control. The activity of ascorbate peroxidase (APX), catalase (CAT), peroxidase (POD) and superoxide dismutase (SOD), increased in treated plants by up to 38, 187, 24 and 175%, respectively compared to the non-treated control. SNP-treated and untreated plants had similar growth characteristics. Compared to the control group, SNP-treatment increased fresh weight and leaf area by 5%. Overall, our findings suggest that the application of sodium nitroprusside to the leaves contributes to reducing physiological damage and enhancing the activities of antioxidant enzymes, thereby improving low temperature stress tolerance in kimchi cabbage.

Drosophila suzukii (Diptera, Drosophilidae) can damage thin-skinned fruits (plums, cherries, peaches, blueberries, and strawberries) by laying eggs inside the fruit. In this study, a basic experiment was conducted to investigate the preference of D. suzukii to export table grape varieties. Four varieties of grapes (Kyoho grape, Shine muscat, Campbell grape, and Black sapphire) were placed in a cage containing more than 2,500 number of D. suzukii adults for 6, 8, 10, 12, and 24 hours and the egg-laying in grape has been induced. After 2 weeks, the number of pupae that emerged was counted. As a result, the largest number of pupae was generated in Kyoho grape among the four types of grapes, indicating that D. suzukii prefers to lay egg in Kyoho grape. Through this experiment, it was determined that 6 h was the appropriate inoculation time, and then an inoculation experiment was conducted on Kyoho grape. The total weight of the Kyoho grape used in the experiment was 36.119 kg, and a total of 2594 pupae were generated. The average number of D. suzukii per cluster was about 50. All stages of D. suzukii treated with low temperature(1℃) for 10 days were completely controlled.

Feltiella acarisuga(Vallot) is a common gall midge that feeds on many species of spider mites. The effect of temperature and humidity on the development of F. acarisuga female were determined using eggs of the twos potted spider mite, Tetranychus urticae(Koch), as prey under laboratory condition (27.9±0.5℃, 90% RH, and 14:10 [L:D] h). F. acarisuga female laid the most eggs on the 5th day after mating, and the acumulative fecundity reached it speak on the 13th day. The sex ratio of F. acarisuga was 6:4, male to female. The average number of eggs per day during life was 2.7 but during the egg-laying period was 3.1. The female’s lifespan was about 3.5 days longer than that of the male in the adult stage but 6.2 days longer including the egg and larval period. The temperature did not affect the female survival and fecundity, but as humidity was lowered, the female’s survival period washortened and fecundity decreased. When using F. acarisuga as natural enemies, the optimal temperature rage was 20 to 30℃ and the relative humidity was 80 to 95%.

Cnidium officinale M. is an important crop that is widely used as a raw material for health functional foods. However, it is experiencing cultivation difficulties due to climate change and abnormally high temperatures. In response to this problem, the characteristics and main causes of the high-temperature damage occurring in C. officinale M. cultivation fields were analyzed. A survey of five farmhouse fields in Jecheon and Bonghwa, major C. officinale M. cultivation areas in Korea in 2018, indicated that about 5% to 37% of the cultivation fields in Jecheon and 5% to 15% of the fields in Bonghwa died from wilting. The high-temperature damage of the C. officinale M. fields is divided into two categories: upper leaves drying due to solar radiation and temperature, and lower leaves dying serially to the radiant heat of the vinyl mulch. Damage caused by radiant heat was typically greater. This is due to the greenhouse effect that occurs in the small space between the black vinyl mulching and the soil. The heat radiated to the surface of the ridge creating an environmental condition that greatly exceeded the atmospheric temperature especially on hot days. As a result, short plants with underground parts, such as C. officinale M., can suffer more high-temperature damage than other plants, so it is considered that it is necessary to develop related technologies such as mulching materials that can reduce pavement temperature in the future.

In this study, we evaluated the effects of acid leaching on the properties of Cr powder synthesized using self-propagating high-temperature synthesis (SHS). Cr powder was synthesized from a mixture of Cr2O3 and magnesium (Mg) powders using the SHS Process, and the byproducts after the reaction were removed using acid leaching. The properties of the recovered Cr powder were analyzed via X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), particle size analysis (PSA), and oxygen content analysis. The results show that perfect selective leaching of Cr is challenging because of various factors such as incomplete reaction, reaction kinetics, the presence of impurities, and incompatibility between the acid and metal mixture. Therefore, this study provides essential information on the properties under acidic conditions during the production of high-quality Cr powder using a self-propagating high-temperature synthesis method.

Cyanobacteria Pseudanabaena strains are known to produce 2-MIB (odorous material) in freshwater systems, thereby causing problems in water use. However, their physiological responses to environmental factors in relation with 2-MIB production is not well explored. This study was conducted to evaluate the effect of temperature on the growth and 2-MIB production of Pseudanabaena redekei. The experimental cyanobacteria strains were separated from the Uiam Reservoir (North Han River) and cultured in the BG-11 medium. Temperature was set to 10, 15, 20, 25, and 30℃ for the experiment, in the reflection of the seasonal water temperature variation in situ. For each temperature treatment, cyanobacterial biomass (Chl-a) and 2-MIB concentration (intra-cellular and extra-cellular fractions) were measured every 2 days for 18 days. Both maximal growth and total 2-MIB production of P. redekei appeared at 30℃. While intra-cellular 2-MIB contents were similar (26~29 ng L-1) regardless of treated temperatures, extra-cellular 2-MIB concentration was higher only in high temperature conditions (25~30℃), indicating that the extents of 2-MIB biosynthesis and release by P. redekei vary with temperature. The 2-MIB productivity of P. redekei was much higher in low-temperature conditions (10~15℃) than high temperature conditions (25~30℃). This study demonstrated that temperature was a critical factor contributing to 2-MIB biosynthesis and its release in cell growth (r=0.605, p<0.01). These results are important to understand the dynamics of 2-MIB in the field and thereby provide basic information for managing odorous material in drinking water resources.

본 연구는 국내 산림생명자원 중 광나무의 대량생산을 위한 기초연구로, Priming 처리에 따른 발아 효율성 및 유묘 생육특성에 미치는 영향을 구명하고자 수행하였다. 종자 Priming처리는 대조구, GA3 (10, 100, 200 ㎎·L-1), Ca (NO3)2 (50, 100, 200 mM), KNO3 (50, 100, 200 mM)를 24시간 처리하여 발아특성을 분석하였고, 순화재배에 따른 생육특성 및 활착률을 조사하여 수확량을 비교·분석하였다. 발아특성은 25℃·KNO3 100 mM에서 발아율이 유의적으로(p<0.001) 높았으며, 평균발아일수는 10.3~18.1일로 15℃에서 대체적으로 빠른 발아일수를 나타냈다(p<0.001). 발아속도 및 발아균일지수 또한 25℃·KNO3 100 mM에서 유의적으로 높은 값을 보였다(p<0.001). 생육특성의 경우 2 5℃·KNO3 100 mM 처리에서 유근 길이(5.1±2.4 ㎝), 초장(5.7±0.7 ㎝), 근장(16.6±2.0 ㎝), 건중량(0.079 g)이 유의적으로 가장 높게 나타났다 (p<0.001). 유묘활력지수 또한 25℃·KNO3 100 mM 처리에서 1418.3으로 높았으며, 가장 높은 수확량(16.8 g/㎡)을 나타냈다. 결과적으로 25℃, KNO3 100 mM 처리 시 실내발아에서 발아효율성을 높일 수 있었으며, 순화재배 시 우수한 유묘 생육을 보여 수확량을 증진시킬 수 있었다.

수경 재배한 멜론의 생육과 수확 후 모의유통 시 품질 차이를 검토하였다. ‘루비볼춘추계’의 수경재배 된 멜론을 이용하여 저장 온도를 2℃와 5℃, 10℃, 20℃하여 모의유통 시 특성과 가용성고형물(SSC), 경도, 생체중 변화, 외관 등의 변화를 조사하였다. 멜론을 상온으로 유통하는 조건 하에서 저온저장에 따른 과실 특성을 본 연구에서 확인하였다. 멜론 저장 시 가용성고형물, 경도, 생체중, 외관이 저장온도에 따라 차이를 보였다. 가용성고형물은 멜론을 저온(2~5℃)에서 저장하여 모의유통 된 것이 상온(20℃)에서 다른 온도처리보다 높은 수준인 것으로 나타났다. 외관과 경도는 모의유통 중 저장 온도에 따른 영향이 지속적이지는 못하였지만 유통초기 저온(2~10℃) 저장이 외관 지수 및 경도 수치가 높은 경향이었다. 저장 온도에 따른 영향이 모의유통 시 계속 효과를 유지하지 못하여 국내 유통 시 이를 고려하여야 할 것이다. 본 연구 결과, 저장 온도에 따른 모의유통 중에 미치는 영향은 저장 직후 짧은 단기간에만 효과를 유지하여, 국내 유통 하에서 저장할 경우에는 바로 소비할 수 있도록 유도해야 할 것으로 생각된다.

Temperature is a crucial environmental factor for rice cultivation due to the climate change and can influence the rice growth and development. Therefore, the effect of temperature on plant growth characters was examined during the vegetative growth stage. Plants were grown under three different temperatures: 23°C/13°C for 18°C, 26°C/16°C for 21°C and 29°C/19°C for 24°C in the phytotron. The temperature was treated after transplanting and ended in early panicle initiation stage. Heading date of the two varieties were strongly affected by the temperature and were delayed in the 18°C. The plant height in the 18°C was 21 % shorter than the 21°C and 24°C and the tiller and leaf number were increased in the 18°C. All the growth rates of the characters were the slowest in 18°C. The stem dry weight was significantly increased in 18°C. Nitrogen content was increased in the leaves of 18°C whereas available phosphate and potassium contents was found to be increased in the stems of 21°C and 24°C. OsNRT2.1 was overexpressed in the leaves and stems of 18°C and OsNRT2.3a could be expressed in 18°C and 21°C temperatures whereas more expressed in 21°C. OsPT1 and OsPT6 could be expressed in the leaf of 18°C and 24°C but could be expressed more in the stem of 18°C. OsHAK1 and OsHAK5 could be overexpressed in the leaves and stems of 18°C. For hormone, OsCKX2 gene was found to be up regulated in the leaves of 18°C and OsIAA1 gene could expressed more in the stem of 24°C.

High-temperature oxidation of a Ni-based superalloy was analyzed with samples taken from gas turbine blades, where the samples were heat-treated and thermally exposed. The effect of Cr/Ti/Al elements in the alloy on high temperature oxidation was investigated using an optical microscope, SEM/EDS, and TEM. A high-Cr/high-Ti oxide layer was formed on the blade surface under the heat-treated state considered to be the initial stage of high-temperature oxidation. In addition, a PFZ (γ’ precipitate free zone) accompanied by Cr carbide of Cr23C6 and high Cr-Co phase as a kind of TCP precipitation was formed under the surface layer. Pits of several μm depth containing high-Al content oxide was observed at the boundary between the oxide layer and PFZ. However, high temperature oxidation formed on the thermally exposed blade surface consisted of the following steps: ① Ti-oxide formation in the center of the oxide layer, ② Cr-oxide formation surrounding the inner oxide layer, and ③ Al-oxide formation in the pits directly under the Cr oxide layer. It is estimated that the Cr content of Ni-based superalloys improves the oxidation resistance of the alloy by forming dense oxide layer, but produced the σ or μ phase of TCP precipitation with the high-Cr component resulting in material brittleness.

In this study, crystallization was effectively suppressed in Al-based metallic glasses (Al-MGs) during pulverization by cryo-milling by applying an extremely low processing temperature and using a surfactant. Before Al-MGs can be used as an additive in Ag paste for solar cells, the particle sizes of the Al-MGs must be reduced by milling. However, during the ball milling process crystallization of the Al-MG is a problem. Once the Al-MG is crystallized, they no longer exhibit glass-like behavior, such as thermoplastic deformation, which is critical to decrease the electrical resistance of the Ag electrode. The main reason for crystallization during the ball milling process is the heat generated by collisions between the particles and the balls, or between the particles. Once the heat reaches the crystallization temperature of the Al-MGs, they start crystallization. Another reason for the crystallization is agglomeration of the particles. If the initially fed particles become severely agglomerated, they coalesce instead of being pulverized during the milling. The coalesced particles experience more collisions and finally crystallize. In this study, the heat generated during milling was suppressed by using cryo-milling with liquid-nitrogen, which was regularly fed into the milling jar. Also, the MG powders were dispersed using a surfactant before milling, so that the problem of agglomeration was resolved. Cryo-milling with the surfactant led to D50 = 10 um after 6 h milling, and we finally achieved a specific contact resistance of 0.22 mΩcm2 and electrical resistivity of 2.81 μΩcm using the milled MG particles.

The physiological characteristics, growth, and yield of each regional rice variety (‘Odaebyeo’, ‘Saechucheong’, ‘Ilmibyeo’) were investigated depending on the impact of changes in temperature and CO2 concentration. Experiments were conducted with a control group, which reflected atmospheric CO2 concentration and temperature, and treatment groups, in which the CO2 concentration and temperature were increased by 250 ppm and 2.0℃ from those in the control group. The results showed that the increase in CO2 concentration and temperature reduced the growth and yield of the rice ‘Odaebyeo’, but did not substantially change the productivity of the ‘Saechucheong’ and ‘Ilmibyeo’. The increase in CO2 concentration and temperature increased stomatal conductance and rate of transpiration of the ‘Odaebyeo’ variety, thereby decreasing its water use efficiency (WUE). In contrast, the increase in CO2 concentration and temperature increased the photosynthetic rate and WUE of the ‘Saechucheong’ and ‘Ilmibyeo’ varieties. The gradual change in climate is considered to directly affect growth and development of rice and diversely affect the productivity of each variety. Therefore, it is necessary to implement technological development, select regionally optimal rice varieties, develop new rice varieties, as well as conduct long-term monitoring of each rice variety for climate adaptation to counter global warming.

This study was conducted to investigate the effects of different water temperatures (8, 11, 14 and 17°C) on growth, survival and hematological parameters of juvenile chum salmon (Oncorhynchus keta) for eight weeks. At the end of the experiment, at 14°C, the final body weights of the O. keta group were the highest compared to the other groups. Also, the O. keta showed a higher tendency in the 14°C group than the 8, 11, and 17°C groups in terms of growth performances, including specific growth rate (SGR), feed conversion ratio (FCR), feed efficiency (FE), weight gain (WG), and condition factor (CF). The survival rate (SR) was 100% at 8 and 11°C groups, 96% at 14°C group and 98% at 17°C group. In the plasma components, the alanine aminotransferase (ALT) was significantly decreased at 17°C group, whereas there was no significant change in the albumin (ALB), total protein (TP), sodium (Na+), potassium (K+) and chloride (Cl-) levels. Among the whole-body composition of salmon, moisture, crude protein, and ash were not significantly affected by water temperature. However, crude lipid in the 8°C group was significantly higher than in other water temperature groups. The results of this study demonstrated that the optimal temperature to stable growth performance for juvenile O. keta was 14°C.

Perilla plant is a special crop that is used as oilseed and food in Korea. Root lesion nematodes have caused great damage to perilla plants, so for effective management of root lesion nematodes, it is necessary to understand their ecology in perilla. In this study, we investigated the effect of temperature in the development of Pratylenchus penetrans (Pp) and Pratylenchus vulnus (Pv) when the nematodes infected the perilla plant. To estimate the effect of temperature, we assessed the reproduction factor (RF); final population/initial population (Pf/Pi) of these two nematode species. We used perilla plants as inoculated hosts and investigated the density of nematodes at 10 weeks after inoculation. As a result, the RF of Pp was highest at 20°C (0.41 (1st test), 2.2 (2nd test)) followed by 25, 30, and 15°C. The RF of Pv was highest at 30°C (9.84 (1st test), 31.39 (2nd test)), followed by 25, 20, and 15°C. Comparing the RF by temperature between Pp and Pv, Pv was higher than Pp at all temperatures used in the test. This study showed the optimal development temperature of Pp was 20-25°C and Pv was 30°C, respectively.

The germination characteristics of the resting cysts of Pheopolykrikos hartmannii collected from the southern coastal sediments of Korea were studied at different temperature conditions, and the morphology and phylogeny of the germlings were examined. The resting cysts of Ph. hartmannii were round and characterized by a red accumulation body and many arrow-like spines and could germinate at temperature of 10 to 30°C. High germination rates (>90%) were observed at 15 and 20°C, indicating that the resting cysts could act as seed populations for the bloom initiation of Ph. hartmannii in Korean coastal waters in early summer or early fall. The morphology of the germlings was generally consistent with the previous description, and an apical groove characterized by a fully enclosed loop was observed. Phylogenetic analysis based on large SubUnit (LSU) rRNA gene sequences revealed that the germlings shared an identical sequence with the Korean and American isolates of Ph. hartmannii and was a sister clade of Polykrikos species.