본 연구에서는 유연성을 갖는 전극 제조를 위해 산 처리된 단일벽 탄소나노튜브 (Acid treated-SWCNTs)를 금이 코팅된 PET 기판 위에 스프레이 코팅하였다. 단일벽 탄소나노튜브가 가지는 단점을 보완하기 위하여 산 처리 공정을 이용하여 나노튜브에 작용기를 도입하여 분산성을 극대화 시켰 으며 전기화학적 특성을 향상 시켰다. 스프레이 기술을 이용하여 제조된 유연성을 갖는 단일벽 탄소나노 튜브 기반의 전극을 1 M의 황산 전해질에서 순환 전압 전류법, 임피던스 분광법 그리고 충·방전 시험을 통하여 전기화학적 특성을 분석 하였다. 그 결과, 응력을 가하지 않은 전극의 전기 용량값은 67 F․g-1로 측정 되었으며, 1000번의 충·방전 시험 후에는 전기 용량값이 63 F․g-1 (94 % 유지)로 감소하는 결과를 보였다. 이에 반하여, 탄소나노튜브 기반의 플렉시블 전극은 500번의 굽힘 시험 (bending test)과 6000 번의 충·방전 시험 후에는 초기의 전기 용량값 (67 F․g-1)이 유지되는 결과를 얻었다.

최근 건강기능성 식용유에 대한 선호도가 높아지면서 저온압착(cold-pressing) 유채유에 대한 관심이 증대되고 있다. 저온압착 유채유는 정제유에 비해 기름 고유의 맛과 향을 느낄 수 있는 장점이 있다. 본 연구에서는 산성백토를 이용한 저온압착 유채유의 탈색과정에서 산성백토의 첨가량, 처리시간 및 반응온도에 따른 탈색 후 이화학적 특성과 품질특성을 분석하고자 하였다. 이화학적 특성으로 색차 (명도, 적색도, 황색도)를 조사하였고, 품질특성은 chlorophyll-A 와 carotenoid 함량, 지방산 조성, 토코 페롤(α, β, γ, δ), 및 식물성 스테롤(β-sitosterol, campesterol, stigmasterol)을 분석하였다.먼저 산성백토(DC-SUPER)의 첨가량(1, 2, 3%)에 따른 저온압착 유채유의 색도변화를 관찰한 결과, DC-SUPER 첨가량 2%에서 탈색 1시간 후 유채유의 색도가 갈색에서 연노랑으로 옅어졌다. 본 결과를 바탕으로 총 3종의 산성백토(DC-SUPER, DC-A3, 및 P1)에 대해 첨가량 2%를 기준으로 처리시간(20, 40, 60, 80분) 증가에 따른 색차를 조사한 결과, 처리시간 20분 경과 후부터 대조구 대비 명도(L)는 증 가하였고, 적색도(a)와 황색도(b)는 감소하는 경향을 보였다. 또한 산성백토 DC-SUPER 2% 첨가 후, 반응온도(40, 80, 120°C) 증가에 따른 색차를 조사한 결과, L값과 a값은 큰 변화를 보이지 않았으나, b 값은 급격히 감소하는 경향을 보였다. 특히, 반응온도 40°C에서 처리시간 20분 이내에 클로로필 A와 카 로티노이드는 대부분 제거되었고, 토코페롤 함량도 현저히 감소하였다. 탈색 전 저온압착 유채유의 총 토코페롤 함량은 46.62mg/100g이나, 탈색 후 총 토코페놀은 12.67mg/100g(20분 탈색), 15.31mg/100g(40분 탈색), 13.56mg/100g(60분 탈색)로 나타나, 약 50% 이상 감소하였다. 탈색 후 α-토코페롤 과 δ-토코페롤의 함량 감소가 매우 컸고, γ>β>α>δ-토코페롤의 순으로 포함되어 있었다. 하지만 탈 색 전·후에 저온압착 유채유의 식물성 스테롤 함량은 큰 변화가 없었다. 따라서 본 연구에서는 산성백토 이용 저온압착 유채유 탈색시 색도를 향상시킴을 확인하였으며, 영양 학적으로 우수한 총 토코페롤 등이 감소한 바 향후 이를 보완 할 수 있는 연구가 필요하다.

The purpose of this study was to analyze University student’s dietary behavior for processed foods and recognition on food nutrition labelling according to the degree of health concern. For this study, 302 University students in Gyeonggi region was surveyed by questionnaire from May in 2016 and it included the questions about general matters, dietary behavior on processed foods, and the food nutrition label system. It was analysed by SPSS win 23.0 program. And the results are as follows. According to the result of the factor analysis, the preference of processed foods were showed 3.21~3.97. There were significant differences in milk and milk products preference according to health concern (p<0.05). Also frequency of processed foods was shown significant differences in milk and milk products, noodles, beverage, and fast food (p<0.05), whereas no significant differences were found in meat products, snack, bread and frozen food (p>0.05). Also, the processed food purchase consideration according to health concern was shown significant differences in nutrition, origin, manufacturing company (p<0.05), whereas no significant differences were found in taste, price, exterior, brand, and shelf life (p>0.05). Thus, it is necessary to do continuing public relations and to provide more opportunities for nutrition education so that the University students may obtain right dietary behavior on processed foods and the system of food nutrition indication be established properly.

This study was conducted to investigate the total polyphenol, total flavonoid and the antioxidant activity in different origin and parts of Moringa olerifera cultivated in Cheorwon. The extraction yield from leaf, root and stem were 25.5, 23.0, 12.3%, respectively. The total polyphenol content was high in the leaf extracts (15.77 mg/g) followed by root extracts (11.23 mg/g) and stem extracts (3.50 mg/g) but the difference of origin was not observed. The total flavonoid content was high in the leaf extracts (14.78 mg/g) followed by stem (1.36 mg/g) and root (1.14 mg/g). The total flavonoid content of Philippines and Thailand leaf were statistically high compared to india leaf. The DPPH radical scavenging activity was high in the leaf extracts at the 1 mg/ml, 0.25 mg/ml but the difference of origin was not observed. The DPPH radical scavenging activity may be attributed to the presence of several compounds such as polyphenol and flavonoid. Hence consumption of diet supplemented with Moringa olerifera leaves could protect the human against diseases induced by oxidative stress.

The rice growing area in Yunnan province of China can be divided into six regions based on climate weather conditions, altitude, ecotype of rice varieties, eco-system, and so on as follows: the alpine and high elevation area of Japonica rice, the cold and warm area of Japonica rice, the Indica and Japonica rice area, the single and double cropping area, the paddy and upland rice area, and the single cropping area of Indica rice. In Yunnan, the annual acreage of rice cultivation has been maintained about 1 million hectares, only 3.8 percent of China’s paddy fields. Amounts of unhulled rice production in 2013 was estimated to be around 6.7 million tons. And average unhulled rice yield per ha was 5.79 tons to 6.70 tons during 2011 to 2013. The three major breeding stages commonly have been for rice breeding program: selection of purelines from native varieties by the first 1960s.: dissemination of introduced varieties from foreign countries in the mid 1960s through 1970s; and creation of new developed varieties by hybridization followed by selection after 1980s. In terms of developing Joponica rice variety, its breeding objectives has been set differently depending on altitude: high yielding, grain quality, cold tolerance, and adaptable to low nitrogen fertilizer varieties for growing in areas of 2,100 m to 2,600 m above the sea level; high yielding, grain quality, resistance to disease, and cold tolerance varieties for cultivating in areas of 1,800 m to 2,100 m; and high yielding, grain quality, resistance to disease, and lodging tolerance varieties for planting in areas of 1,450 m to 1,800 m. In addition, researchers are breeding Japonica hybrid varieties for improving yield potentials in Yunnan Agricultural University.

애기유리나방과 복숭아유리나방의 성페로몬 트랩을 이용하여 2013년부터 2015년까지 경남과 전남지역의 단감원에서 이들의 발생소장을 조사하였다. 두 종 모두 년 2회 발생하는 것으로 조사되었다. 애기유리나방의 1화기의 발생최성기는 5월 하순, 2화기는 9월 중·하순인 것으로 나 타났다. 복숭아유리나방의 1화기 발생최성기는 해에 따라 조금씩 달라 5월 상순 - 6월 상순 정도이었고, 2화기 발생최성기는 애기유리나방처럼 9 월 중·하순으로 조사되었다. 년도별 지역별 유인량을 종합해보면 애기유리나방은 1세대의 유인량이 2세대보다 약 1.9배 많았으나 복숭아유리나 방의 경우에는 이와 반대로 2세대의 유인량이 1세대보다 약 1.3배 많았다. 그러나 복숭아유리나방의 감나무에 대한 피해여부는 아직까지 밝혀진 바가 없다.

For evaluating the boar semen quality, sperm motility is an important parameter because the movement of sperm indicates active metabolism, membrane integrity and fertilizing capacity. Phospholipase C zeta (PLCz) is important enzyme in spermatogenesis, but the effect has not been confirmed in pigs yet. Therefore, this study was aimed to analyze their association with sperm motility and kinematic characteristics. DNA samples from 124 Duroc pigs with records of sperm motility and kinematic characteristics [total motile spermatozoa (MOT), curvilinear velocity (VCL), straight-line velocity (VSL), the ratio between VSL and VCL (LIN), amplitude of lateral head displacement (ALH)] were subjected. A SNP in non-coding region of PLCz g.158 A > C was associated with MOT (p < 0.05), VCL (p < 0.01), LIN (p < 0.01) and ALH (p < 0.05) in Duroc population. Therefore, we suggest that the intron region of the porcine PLCz gene may be used as a molecular marker for Duroc boar semen quality, although its functional effect was not defined yet. Whether the association is due to the candidate gene or not require further verification. Thus, it will be of interest to continue association studies in the regions surrounding those genes.

For evaluating the boar semen quality, sperm motility (MOT) is an important parameter because the movement of spermatozoa indicates active metabolism, membrane integrity and fertilizing capacity. Estrogen receptors 2(ESR2) is involved in estrogen related apoptosis in cell cycle spermatogenesis, but their functions have not been confirmed in pig until now. Therefore, this study was conducted to analyze their association with sperm motility and kinematic characteristics. DNA samples from 105 Duroc pigs with records of semen motility and kinematic characteristics [Total motile spermatozoa (MOT), Curvilinear velocity(VCL), Straight-line velocity(VSL), the ratio between VSL and VCL(LIN), Amplitude of Lateral Head displacement(ALH)] were analyzed. A SNP in coding region of ESR2 g.35547A > G in exon 5 was associated with MOT (p < 0.05) in Duroc population. Therefore, we suggest that the porcine ESR2 gene may be used as a molecular marker for Duroc boar semen quality, although its functional effects were not defined yet. These results might shed new light on the roles of ESR2 in spermatogenesis as candidate gene for boar fertility, but still the lack of association across populations should be considered.

Cluster-of-differentiation antigen 9 (CD9) gene expressed in the male germ line stem cells is crucial for sperm–egg fusion, and was therefore selected as a candidate gene to investigate Duroc boar semen motility and kinematic characteristics. This study was performed to investigatetheir association with semen motility and kinematic characteristics. DNA samples from 96 Duroc pigs with records of sperm motility and kinematic characteristics [Total motile spermatozoa (MOT, 82.27±5.58), Curvilinear velocity(VCL, 68.37±14.58), Straight-line velocity(VSL, 29.06±6.58), the ratio between VSL and VCL(LIN, 47.36±8.42), Amplitude of Lateral Head displacement(ALH, 2.88±0.70)] were used in present study. A single nucleotide polymorphism (g.358A>T) in intron 6 was associated with MOT, VCL, VAP and ALH in Duroc population (p<0.05). Therefore, we suggest that the porcine CD9 may be used as a molecular marker for Duroc boar semen quality, although its functional effect was not clear yet. These results will improve the understanding of the functions of the CD9 in spermatogenesis within the reproductive tracts, and will shed light on CD9 as a candidate gene in the selection of good sperm quality boars.

In the current study, oxidative decomposition of a volatile organic compound was investigated at room temperature and pressure. The experiment was carried out in lower ethylene concentration and with various higher gas flow rates. The reactor has 7 different compartments in which the reaction takes place independently. Plasma was generated inside each compartment by the application of alternating current (AC) voltage. 5 wt% manganese loaded and 5 wt% silver loaded 13X zeolite were used as catalysts. Bare zeolite showed higher ethylene decomposition efficiency than Ag loaded and Mn loaded zeolite. Ozone concentration was increased slightly while increasing the SIE, reached a maximum and started decreasing. Ag loaded zeolite also showed similar decomposition efficiency, but the concentration of ozone was greatly lowered.

It was a case study to use as a basic data for efficient the preservation and management of subalpine coniferous forest in national parks. It is based on inhabitation condition of 210 individuals of Abies koreana Wilson that was found through local investigation in the sub-alpine zone of Jirisan National Park and Songnisan National Park. It analyzed the effect of the geographical location and topographical features, which are the basics of location environment, on the growth of A. koreana. The variables related to the growth of A. koreana are tree height and diameter at breast height. Topographical features include geographical longitude, altitude above sea level, slope of the mountains, aspect that describes the direction in which a slope faces and topographical wetness index. Topographical features were extracted through GIS spatial analysis. It used canonical correlation analysis to estimate whether the two variables groups have related to each other and how much they are related, if any, and estimated the effect of the geographical and topographical features on the growth structure of A. koreana using multiple regression analysis. The tree height and diameter at breast height that represent the growth structure of A. koreana show greater relation to geographical latitude distribution than topographical feature and the geographical and topographical factors show greater relation to diameter at breast height than tree height. The growth structure’s variable and geographical and topographical variable of A. koreana have meaningful relation and the result shows that geographical and topographical variables explain 18.1% of the growth structure. The variables that affect the diameter at breast height of A. koreana are geographical latitude, topographical wetness index, aspect and altitude, which are put in order of statistical significance. The higher the latitude is, the smaller the diameter at breast height. Depending on the topographical feature, it becomes bigger. The variable that affects the tree height is topographical wetness index, which was the only meaningful variable. Overall, the tree height and diameter at breast height that are related to the growth structure of A. koreana are affected by geographical and topographical feature. It showed that the geographical feature affected it the most. Especially the effect of water among the topographical features is expected to be bigger than the other topographical factors. Based on the result, it is expected that geographical and topographical feature is an important factor for the growth structure of A. koreana. Even though it considered only the geographical and topographical features and used spatial analysis data produced by GIS, the research results will be useful for investigating and researching the growth environment of coniferous forest inhabiting in sub-alpine zone of national parks and are expected to be used as basic data for establishing measures to efficiently manage and preserve evergreen needleaf tree such as A. koreana.

Aquatic ecosystems are receiving various harmful effects due to anthropogenic chemical pollutions. To protect wildlife, risk assessments of the chemicals are conducted using reference indexes of toxicity estimated by species-level laboratory tests and/or micro-/mesocosm community-level studies. However, the existing micro-/mesocosm communities are structurally too complicated, and it is also difficult to compare the experimental results directly with those from species-level tests. Here, we developed a procedure of a simple bi-trophic microcosm experiment which contains the common species (a green algae, Pseudokirchneriella subcapitata and a cladoceran, Daphnia magna) for testing chemical toxicities. For the proper operation of bitrophic microcosm experiment, the minimum required concentration of primary producer (P. subcapitata) is 5×105 cells mL-1. The microcosm system showed higher stability when the initially introduced D. magna population was composed of neonates (<24-h old) than adults and those mixture. This simple microcosm system would be an applicable tool to estimate the disturbing impacts of pollutants on plant-herbivore interactions, and linking the species- and population-/community level risk assessments in the future studies.

Value of excellent breeding animals is important in livestock industry, but their economic life time is limited. And, many countries have been trying procuration of genetic resource in good animals. Therefore, this study was conducted to determine embryo production and to test efficiency of embryo transfer via non-surgical artificial insemination (AI) in different breed of superior sows. A total of 17 sows were used in this experiment (Duroc, n=10; Landrace, n=4; Yorkshire, n=3). The sows were artificially inseminated by semen of same breed boars. After 4 or 5 days following the AI, the embryos were obtained from the sows and then transferred to Landrace and Yorkshire recipients (n=3, respectively) by non-surgical method. The corpora lutea tended to be increased in Yorkshire and Landrace than Duroc(28 and 26 vs. 17, respectively). The recovery of embryo was 78.8% in Landrace, 65.4% in Duroc and 51.4% in Yorkshire. Duroc showed lower morulaes and early blastocyst embryos than 2, 4 ,8 and 16 cell. The morula in Yorkshire was higher (P<0.05) than that of Duroc (4.7 vs. 3.4). Similarly, the morulaes and early blastocyst embryos presented greater (P<0.05) in Landrace compared with other breed sows. The recipient sows were pregnant in a Landrace only. This reason may be due to little embryos inserted in the recipients. In addition, pregnancy results were limited because of the little sows. In conclusion, ovulated ovum in sows can be affected by different breed. Also, further study needed pregnant test by using the many embryo in each breed.

최근 한국의 소년사법에서 우려할 만한 현상 가운데 하나가 재범률의 증가이다. 6호 처분은 40년간 중간단계 처우로서 운영되어왔지만, 과연 6호 처분이 소년범의 재비행 예방에 기여하고 있는지에 대한 연구는 미흡하다. 6호 처분 시설들이 과거와는 다르게 새로운 프로그램을 도입하는 등 변화를 하고 있다는 시점에서 새로운 관심과 연구들이 필요하다. 이 연구는 기존의 시설 내 처우가 주는 낙인효과(labelling effect)와 범죄배양효과(crime breeding effect)을 극복하자는 6호 처분의 목적에 근거하여, 6호 처분의 프로그램이 과연 입소자의 재범태도에 영향을 미치고 있는지 살펴보았다. 이를 위해, 가족요인, 학교요인, 또래요인, 과거 판결횟수 등 입소 전 과거 생활과 재범태도에 영향을 미칠 가능성이 높은 입소 후 행동변화를 추가하여 프로그램이 재범태도에 영향을 미치는지를 살펴보았다. 또한 재범태도에 영향을 미치는 요인들과의 경로를 통해 프로그램 효과를 탐색하였다. 연구결과를 살펴보면, 주요 변인을 중심으로 회귀분석을 실시한 결과 가족애착과 또래애착, 프로그램만족도만이 유의미하게 나타났다. 친구들과의 애착관계가 잘 형성되어 있을수록, 가족과의 애착이 클수록, 프로그램만족도가 높을수록 재범태도에 긍정적인 영향을 미치고 있었다. 더불어 재범태도에 영향을 미치는 요인들 간의 경로는 어떠한 지 분석해본 결과, 프로그램 만족도만이 재범태도에 직접효과와 간접효과를 가지고 있었다. 위의 결과를 토대로 지역사회 내 수용처우 입소자들이 재범을 하지 않겠다는 의지 혹은 태도를 높이기 위해서는 입소자를 위한 프로그램강화와 실질적인 차원에서의 프로그램 효과성을 높일 수 있는 정책과 제도적 장치가 필요함을 알 수 있었다. 또한 한국의 현실에 근거한 지역사회 내 수용시설 프로그램 개발, 운영, 관리, 평가 등에 대한 연구들도 마련되어야 할 것이다.

This study aims at providing basic data to objectively evaluate the areas suitable for reintroduction of the species of Asiatic black bear (Ursus thibetanus) in order to effectively preserve the Asiatic black bears in the Korean protection areas including national parks, and for the species restoration success. To this end, this study predicted the potential habitats in East Asia, Southeast Asia and India, where there are the records of Asiatic black bears’ appearances using the Maxent model and environmental variables related with climate, topography, road and land use. In addition, this study evaluated the effects of the relevant climate and environmental variables. This study also analyzed inhabitation range area suitable for Asiatic black and geographic change according to future climate change. As for the judgment accuracy of the Maxent model widely utilized for habitat distribution research of wildlife for preservation, AUC value was calculated as 0.893 (sd=0.121). This was useful in predicting Asiatic black bears’ potential habitat and evaluate the habitat change characteristics according to future climate change. Compare to the distribution map of Asiatic black bears evaluated by IUCN, Habitat suitability by the Maxent model were regionally diverse in extant areas and low in the extinct areas from IUCN map. This can be the result reflecting the regional difference in the environmental conditions where Asiatic black bears inhabit. As for the environment affecting the potential habitat distribution of Asiatic black bears, inhabitation rate was the highest, according to land coverage type, compared to climate, topography and artificial factors like distance from road. Especially, the area of deciduous broadleaf forest was predicted to be preferred, in comparison with other land coverage types. Annual mean precipitation and the precipitation during the driest period were projected to affect more than temperature’s annual range, and the inhabitation possibility was higher, as distance was farther from road. The reason is that Asiatic black bears are conjectured to prefer more stable area without human’s intervention, as well as prey resource. The inhabitation range was predicted to be expanded gradually to the southern part of India, China’s southeast coast and adjacent inland area, and Vietnam, Laos and Malaysia in the eastern coastal areas of Southeast Asia. The following areas are forecast to be the core areas, where Asiatic black bears can inhabit in the Asian region: Jeonnam, Jeonbuk and Gangwon areas in South Korea, Kyushu, Chugoku, Shikoku, Chubu, Kanto and Tohoku’s border area in Japan, and Jiangxi, Zhejiang and Fujian border area in China. This study is expected to be used as basic data for the preservation and efficient management of Asiatic black bear’s habitat, artificially introduced individual bear’s release area selection, and the management of collision zones with humans.

Optimizing energy usage for maximum efficiency is an essential goal for manufacturing plants in every industrial manufacturing sector. The generation and distribution of purifying compressed air is a large expense incurred in practically all manufacturing processes. Not only is the generation and treatment expensive equipment of compressed air, but frequent maintenance and effective operation is also required. As a plant’s compressed air system is often an integral part of the production process, it needs to be reliable, efficient, and easy to be maintain. In this paper, we study to find operating method to save energy from the adsorption dryer in the process of purifying compressed air, which is required for a clean room production site in “A” company. The compressed air passes through a pressure vessel with two “towers” filled with a material such as activated alumina, silica gel, molecular sieve or other desiccant material. This desiccant material attracts the water from the compressed air via adsorption. As the water clings to the desiccant, the desiccant particle becomes saturated. Therefore, Adsorption dryer is an extremely significant facility which removes the moisture in the air 70℃ below the dew point temperature while using a lot of energy. Also, the energy consumption of the adsorption dryer can be varied by various operating conditions (time, pressure, temperature, etc). Therefore, based on existing operating experiments, we have searched operating condition to maximize energy saving by changing operating conditions of the facility. However, due to a short experiment period (from September to October), further research will be focused on considering seasonality.

본 실험은 종자 가격이 비싼 여주를 삽목하여 증식하고자 할 때 적절한 줄기 절단위치와 삽목상내 온도를 구명하기 위하여 실험하였다. 시험품종 ‘NS454’(NS)와 ‘드레곤’(DR) 품종을 대상으로 삽수 절단 위치를 3번째 잎의 마디를 절단한 처리(I) 와 3번째와 4번째 잎의 중간없이 발근이 되지 않았다. 뿌리의 개체당 발근수는 DR 품종의 경우, 28oC 처리구는 마디 중간지점을 절단한 처리구에서 5.3개로 처리구중에서 가장 많았고 마디를 절단한 처리구는 2.7개이었다. 따라서 여주의 삽목시 절단위치는 마디부위를 절단하거나 마디 중간지점을 절단해도 되지만 마디 중간지점을 절단하는 것이 생존율을 높일 수 있을 것으로 사료되고, 또한 삽목상내 기온을 28oC 정도를 유지해 주는 것이 바람직할 것으로 판단된다.

The objective of this study is to investigate patent trends of Daegu city which tries to introduce environment friendly energy and to develop new technology or new industry sprung from technology convergence on smart decentralized energy technology and other technologies. After applying network analysis to corresponding groups of technology or industry convergence, strategy for future energy convergence industry is provided. Patent data applied in Daegu city area are used to obtain research goal. The technology which contains several IPC codes (IPC Co-occurrence) is considered as a convergence technology. Path finder network analysis is used for visualizing and grouping by using IPC codes. The analysis results categorized 13 groups in energy convergence industry and reclassified them into 3 cluster groups (Smart Energy Product Production Technology Group, Smart Energy Convergence Supply Technology Group, Smart Energy Indirect Application Technology Group) considering the technical characteristics and policy direction. Also, energy industry has evolved rapidly by technological convergence with other industries. Especially, it has been converged with IT industry, and there is a trend that energy industry will be converged with service industry and manufacturing industry such as textile, automobile parts, mechanics, and logistics by employing infrastructure as well as network. Based on the research results on core patent technology, convergence technology and inter-industry analysis, the direction of core technology research and development as well as evolution on decentralized energy industry is identified. By using research design and methodology in this study, the trend of convergence technology is investigated based on objective data (patent data). Above all, we can easily confirm the core technology in the local industry by analyzing the industrial competitiveness in the macro level. Based on this, we can identify convergence industry and technology by performing the technological convergence analysis in the micro level. 1

황색 육아종성 췌장염은 드문 사례로서 저자들은 췌장의 고형 종양이 의심되어 수술 후 조직검사로 진단된 황색 육아 종성 췌장염(xanthogranulomatous pancreatitis)의 1예를 경 험 했기에 문헌 고찰과 함께 보고한다.

Korean automobile industrial is in a difficult situation because of more competitive global market and lower demand. Therefore, domestic as well as global automobile manufacturers are making greater efforts in cost reduction to strengthen the competitiveness. According to statistical data, logistics cost in domestic manufacturers is higher than advanced countries. In this study, we developed program to effectively manage standard time of procurement logistics, and confirm based on A-automobile factory data. For the purpose, we develop the system which is possible to manage standard time as well as calculate man-hour. Program is not just for calculating and managing standard man-hour, scenarios analysis function will be added to calculate benefit while introduce logistics automated equipment. In this study we propose scenario using AGV instead of electric motor while move component. In the scenario analysis, job constitution is changed，and then we use system to compare the result. We can confirm standard man-hour is reduced from 22.3M/H to 14.3M/H. In future research, it is necessary scenario analysis function, and develop algorithm with realistic constraint condition.