In this study, the 'force density method' for shape finding of cable net structures is presented. This concept is based on the force-length ratios or force densities which are defined for each branch of the net structures. This method renders a simple linear 'analytical form finding' possible. If the free choice of the force densities is restricted by further condition, the linear method is extended to a nonlinear one. The nonlinear one can be applied to the detailed computation of networks. In this paper, the general inverse matrix is introduced to solve the nonlinear equilibrium equation including Jacobian matrix which is rectangular matrix. Several examples for linear and nonlinear analysis applied additional constraints are presented. It is shown that the force density method is suitable for form finding of cable net and the general inverse matrix can be applied to solve the nonlinear equation without Lagrangian factors.
최근 컴퓨터 기술의 발전과 함께 Mobile 컴퓨터 환경도 함께 급속히 발전하고 있다. 이로 인해 오프라인 컴퓨팅 및 네트워킹을 이용하던 사용자들이 Mobile 컴퓨팅 환경을 자주 이용하게 되고, Mobile 솔루션에 대한 사용자의 요구도 다양화되고 있는 추세이다. 이 중 Mobile 지도 서비스는 휴대하기 편한 Pocket PC라고도 불리는 PDA(Personal Digital Assistants)는 자신의 현재 위치를 확인할 수 있는 GPS(Glob
Natto is a Japanese traditional food made from whole soybeans by the fermentation of Bacillus natto. The purpose of this study was to investigate the effect of Natto mucilage on lipid metabolism in rats. The levels of total cholesterol, LDL-cholesterol and triglyceride in serum of rats fed Natto mucilage diets were lower than those in control rats, but serum HDL-cholesterol and phospholipid were higher than those in control rats. The results indicate that Natto mucilage may have more beneficial roles in lipid metablism because it decreased serum cholesterol and increased bilirubin excretion.
As Internet spreads rapidly, the industrial structure is changing to a new paradigm. The previous EDI system was asked to change and WEB EDI, E-Mail EDI, FTP EDI etc. which are based on the internet appeared. These days the XML/EDI which has XML document appeared. The XML/EDI consider advantages and disadvantages of VAN/EDI and EDI which based on the internet. Also, EDI system has to assure a safe exchange between sender and receiver. But, the internet has security problems because it uses a open TCP/IP protocol. Although there are many methods for security, it is being studied with XML concept. On this paper, we will suppose the XML/EDI system model with XML Signature, and build a procedure of electronic signature and delivery of document between sender and receiver.
In this case study, results of the explosion accident at MEK-PO factory were analysed by using the consequence analysis of quantitative hazard assessment and the explosion energy, the burst pressure of vessel, and overpressures at the explosion center and at 300m distance from the explosion center were estimated, respectively. As a result, we found that a cause of accident was the runaway reaction of product(MEK-PO) because of the molecular expansion in vessel and that the possibility of the runaway reaction was classified the mechanical failure(the obstacle of refrigerator or the shutdown valve), design error, and operating error by lack of thermochemical knowledge. Also, the evasive action to prevent accident was suggested.
'황금배' 동녹발생이 해에 따라 큰 차이를 보이는 것은 강우가 크게 관여하기 때문인 바 본 연구에서는 강우와 동녹발생과의 관계를 구명하기 위하여 인위적으로 가습처리를 하여 높은 상대습도와의 관계를 구명하였다. 높은 상대습도는 기공저항을 적게 하였다. 따라서 순수동화산물의 축적이 과실의 비대를 촉진하여 가습처리에서 평균 과중이 크게 나타났다 광합성속도에는 처리간의 차이가 없었다. 동녹 발생시기는 과중과 과실표면적의 신장속도가 가장 빠른 시기인 7월 25일 전후이며, 높은 상대습도가 과실의 신장을 촉진하였으므로 가습처리에서 동녹발생이 많았다. 7월 하순은 과실의 칼슘농도변화가 큰 시기로서 세포벽 구성에 주요한 물질인 칼슘량의 저하가 동녹발생과 상관이 있을 것으로 생각된다. 강우에 의한 높은 상대습도가 동녹발생에 미치는 영향은 높은 상대습도에 의해 순수광합성물질의 많아지고 이에 따라 과실신장이 빨라지나 과실세포의 신장을 위해 전류되는 동화산물량과 이동되는 수분 포함한 무기성분량의 일시적 불균형이 큰 이유 중의 하나라고 생각된다.
본 연구는 전남 무안 관측소에서 1995년 8월부터 1997년 12월까지 측정된 CH4의 농도자료를 이용하여, 비교대상으로 설정된 국내·외 관측점들과의 관계를 설명하기 위해 다양한 분석을 수행하였다. 연구관측 기간동안 무안지역에서는 CH4의 평균농도가 1898 ± 85.3 ppb로 나타나, 여타 모든 관측지점들 중에서 가장 높게 측정되었다. 그리고 국내의 또 다른 관측점인 태안 지역에서도 이에 가까운 고농도를 유지하였다. 또한 기타 국외 지점들에서는 인구가 적고 해양이 많은 남반구에 비해 북반구에서, 그리고 저위도에서 고위도로 갈수록 CH4의 농도가 높게 나타났다. 무안지역의 월주기 농도경향을 분석한 결과, 2, 3월에 CH4의 농도가 서서히 증가하여 8월에 1958 ppb로 정점을 보여주었다. 모든 관측점들에서 월별 변화양상을 동일한 기준으로 비교분석하기 위해서, 월별 진동폭의 변화를 살펴보았다. 그 결과, 국내의 두 지점에서 80 ppb이상의 높은 진동폭을 띠는 것으로 보아서, 국외 관측점들에 비해 CH4의 발생/소멸이 매우 불규칙하게 진행되고 있음을 볼 수 있었다. 이와 더불어 무안지역의 자료를 계절적 주기를 중심으로 분석하면, 농경지나 측사와 같은 인근지역에 위치한 자연적 발생원의 영향이 강한 여름철을 전후하여 고농도를 보였다. 반면 북반구에 위치한 국외 관측지점들에서 동일 계절에 저농도를 보이는 것으로 나타났다. 이러한 현상은 이 기간에 OH radical의 생성이 활발해져, CH4의 소멸이 촉진되었을 가능성이 큰 것으로 나타났다. 전체 CH4의 일평균 농도를 이용한 장주기적 추세에 대한 분석결과에 따르면, 국내의 두 관측지점들(무안, 태안)에서는 수일 주기의 농도 변화가 급격하게 이루어졌지만, 뚜렷한 계절적 주기는 발견하기가 어려웠다. 그런데 국외의 관측지점들에서는, 계절적 주기의 변화가 상대적으로 뚜렷하고 규칙적인 양상을 보여주었다. 지역별 CH4 농도간의 상관분석을 실시한 결과, 국내 두 지점들 간에는 양의 상관관계, 무안지역과 북반구의 관측점들과는 음의 상관관계를 보였다. 반면 남반구에 위치한 관측점들과는 양의 상관관계를 확인 할 수 있었다. CH4 농도의 장주기적 변화경향을 분석하기 위해, 단순회귀분석을 실시한 결과, CH4 농도의 증가율이 무안과 태안 지역에서 각각 연간 16.5, 14.8 ppb로 가장 높게 관측되었다. 관측점 주변에 복잡한 배출원의 작용이 가능하다는 점을 감안하여, 무안지역의 CH4 농도변화와 풍향과의 연계성을 비교해 보았다. 이 결과에 의하면, 동풍계열의 풍계가 나타날 때 고농도의 값이 나타났으며, 청정한 공기가 유입되는 남서풍의 풍계시에는 비교적 낮은 CH4 농도가 유지되었다. 이처럼 CH4의 장주기적 분포특성은 연구대상지역의 복잡한 배출·소별작용과 연계되어 매우 다양하고 독특한 형태를 띠고 있음을 확인할 수 있었다.
Microstructural and mechanical characteristics of P/M 6061 Al alloy subjected to equal channel angular pressing (ECAP) were investigated. The P/M 6061 Al alloy had an intial grain size of approximately . An equiaxed ultra-fine grained structure with the mean grain size of was obtained by four repetitive ECAP at 473 K. The microhardness of P/M 6061 Al alloy was drastically increased from about 40 Hv to 80 Hv by two repetitive ECAP at 373 K. However, the microhardness decreased with increasing ECAP temperature. The tensile stength of as-hot-pressed P/M 6061 Al alloy before ECAP was 95 MPa, whereas it increased to both 248 MPa after two repetitive ECAP at 373 K and 130 MPa after four repetitive ECAP at 473 K. The tensile properties of the ECAPed sample were compared with those of commercial cast 6061-O and 6061-T4 Al alloys.
The 6061 Al alloy based composites reinforced with 10 vol% SiC whiskers were prepared by powder metallurgy with the powders having the different sizes, i.e. < and> The composites were subjected to equal channel angular pressing (ECAP) at various conditions and the microstructural changes during ECAP were examined In the composites SiC whiskers were clustered and randomly aligned. The clusters were relatively well distributed in the composite with the smaller initial powder size. After ECAP, the clusters were aligned parallel to flow direction and became smaller. In addition, the shape of clusters was changed from irregular to round. The microstructure of the ECAPed samples were compared with those of the conventionally hot-extruded composites. The uniform microstructure and enhanced microhardness could be obtained by using the powders having the smaller size, decreasing ECAP temperature and repeating ECAP.