In this study, Ti powder was fabricated from Ti scrap by the Hydrogenation-Dehydrogenation (HDH)method. Hydrogenation reactions of Ti scrap occurred at near 450oC with a sudden increase in the reactiontemperature and the decreasing pressure of hydrogen gas during the hydrogenation process in the furnace. Thedehydrogenation process was also carried out at 750oC for 2hrs in a vacuum of 10-4torr. After the HDHprocess, a deoxidation treatment was carried out with the Ca(purity: 99.5) at 700oC for 2hrs in the vacuumsystem. It was found that the oxidation content of Ti powder that was deoxidized with Ca showed noticeablylower values, compared to the content obtained by HDH process. In order to fabricate Ti compacts, Ti powderwas sintered at 1100~1400oC for 2hrs under a vacuum of 10-4torr. The relative density of compact was 94.9%at 1300oC. After sintering, all of the Ti compacts showed brittle fracture behavior, which occurred in an elasticrange with short plastic yielding up to a peak stress.

Web2.0 refers to a new service models based by a community oriented philosophy. This creates new opportunities for technology providers and service. The agricultural technology information service in the base of open source technology provide opportunities for increased distribution and visibility to farmer and general user. We would like to find out vest service models and platform that will find new ways of agriculture technology information service. This study suggests that these new agriculture information service strategy in new paradigm of web 2.0. should be revised and adapted to Open API and new applied strategy in agriculture should be developed considering the impact of web 2.0.

본 연구는 2007년도 국가산림자원조사 자료 중 충청남도 지역에서 조사된 주요 수종별 연년 직경생장량의 특성에 대하여 분석하고자 하였다. 2007년도 충남지역에서 조사된 고정표본점은 총 49개소이며, 직경생장량 조사를 위해 목편을 채취한 개체목으로 총 717본의 표준목이 측정되었다. 주요 수종들의 연년 직경생장량은 임령과 임분밀도가 증가함에 따라 감소하는 일반적인 경향을 보였다. 연년 직경생장량을 분석한 결과에 의하면, 산벚나무가 약 2.14㎜/yr로 연년 직경생장량이 가장 높았고, 그 다음은 졸참나무(2.10㎜/yr), 해송(2.03㎜/yr), 소나무(1.91㎜/yr), 그리고 밤나무(1.90㎜/yr) 순으로 나타났다. 이와 같은 정보는 충남지역에 분포하는 주요 수종의 연년 직경생장량 특성을 이해하는데 중요한 정보를 제공해 준다.

The purpose of this study is to present the scheme that can enhance the value of native local foods by analyzing the case into which storytelling is incorporated in order to revitalize native local foods. Towards this end, the cases of native local foods throughout the country were recommended through professional survey and one region among them was finally selected through the field study. The survey on the native local foods was conducted through qualitative study. The four stages of storytelling: the findings of storytelling, the production of storytelling, the experience of storytelling, and sharing of storytelling were analyzed by stage and the contents of the survey by stage were developed. In the findings of story, the origins and background of the main family's foods and food-related stories were derived. The production of stories deals with how to convey the stories of surveyed native local foods to consumers and it presented the stories about the place and food menu. In the experience of storytelling, the physical environment and non-physical environment, in which people visit native local eating houses and experience native local foods were analyzed. Finally, in the sharing of story, how the tourists who have experienced the native local foods make stories and disseminate and share them was analyzed. The significance of this study is that through the storytelling technique it presented the findings, production, experience and sharing of native local foods in the level that can apply to practical business. Although the research is in the stage of inquiry, this study is meaningful in that it presented the basic methodology that can induce the revitalization of the native local food industry through examining the tradition and significance of native local foods that can be found in all the regions of the country.

Consumers are very concerned about food safety as the risk with food increased. This study was conducted to evaluate the perceptions and practices of consumers on food safety in order to collect some information for the development of consumer education program. Total 500 consumers were asked to answer for survey constituted with 6 questions of generic information, 4 of food safety perceptions and 8 of food safety practices from June to July, 2006. More than half of respondents (51.8%) were unsatisfied with the food safety management of government while the individual practices on food safety were satisfactory. Especially, most respondents (98.7%) checked the expiration date of food when they purchased and 97% of respondents were washed hands before food preparation. The higher food safety perception, the better food safety practices of consumers. These results suggest that the systematic and continuous educations on food safety hazards and the principles of sanitation management are necessary for safe food handling and perception on food safety.

In this study, Ti powder was fabricated from Ti scrap by a hydrogenation-dehydrogenation (HDH)method. The Ti powders were compacted by Spark plasma sintering (SPS) and the microstructure andmechanical properties of the powders were investigated. A hydrogenation reaction of Ti scrap occurred attemperatures near 450oC with a sudden increase in the reaction temperature and a decrease in the pressureof the hydrogen gas as measured in a furnace during the hydrogenation process. In addition, a dehydrogenationprocess was carried out at 750oC for 2hrs in a vacuum of 10-4torr. The Ti powder sizes obtained byhydrogenation-dehydrogenation and mechanical milling processes were in the range of 1~90µm and 1~100µm,respectively. To fabricate Ti compacts, Ti powders were sintered under an applied uniaxial punch pressure of40 MPa at in a range of 900~1200oC for 5 min. The relative density of a SPSed compact was 99.6% at 1100oC,and the tensile strength decreased with an increase in the sintering temperature. However, the hardnessincreased as the sintering temperature increased.

This studyinvestigated the preceding studies and concept of Glam Rock style, modernistically reinterpreted its aesthetic function and symbolism and connected them to design. It analyzed according to the standards for classification the Glam Rock style appearing mainly in the collections from 2002 S/S to 2007 S/S and presented four pieces of design through the analysis. Its findings are synthesized as follows. First, unstructured design constitutes mule stressing gold cubic overall. It takes an unstable form by the placement of unshapely front ball of foot from transforming Chopin and a relatively poor heel. Second, over trimming constitutes separated pumps in the form of over trimming irregularly a piece of broken glass, metal and thumb tack. Third, Mix & Match combines Boot body of flexible knit material with an acrylic wedge sandal. Fourth, a platform sandal has the structure of color contrast between yellow and bronze in calf fur of tiger-skin pattern. I hope that this study will be developed by reflecting Glam Rock spirit and style as cultural phenomena through analyzing Glam Rock style and presenting design according to selected standards for classification, inferring plastic beauty of fashion shoes from them, investigating the change and feature of age-specific shoe design and making a new attempt possible.

충적하천의 이중 만곡부지형에 위치한 낙동강 하회마을은 한국내 대표적인 이동상 모래사주 구간이다. 그러나 상류에 댐이 건설된 이후 첨두유량이 조절되고 유사량 공급이 감소하면서, 하회마을구간에서는 모래사주의 이동성 저하, 사주의 식생정착 및 식생역이 확장현상이 나타나면서 사주가 고정화되고 있다. 이러한 현상은 댐하류에 존재하는 하천의 대표적인 현상으로서 국내 외적으로 하도내 사주와 식생에 대한 체계적인 연구와 관리의 필요성이 증가하고 있다. 본 연구는 낙동강 하회지구에서 모래사주의 지형변화에 따른 원인과 식생역의 확장과정을 파악하기 위한 것으로, 수리, 지형, 토양의 이화학적 특성, 식생조사 등을 실시하였다. 연구결과에 따르면 홍수기 동안 만곡부 내측에 워시로드와 부유사의 퇴적작용으로 영양물질의 함량이 높은 매트릭스가 형성되면서 선구식물의 침입하게 되고, 일정기간의 무홍수 기간을 거치는 동안 천이과정을 거쳐 사주식생이 정착하게 되며, 이후 반복적인 홍수는 식생정착부의 유사퇴적을 촉진하게 되면서 결과적으로 토성의 변화를 가져오면서 식생역의 확장을 유발하게 된다는 메카니즘을확인할 수 있었다. 이는 모래사주에서 식생역의 확장과정이 반복적인 홍수기와 비홍수기의 출현과 유사이송, 그리고 토양의 영양물질 함량과 밀접한 관계를 가지고 있음을 나타낸다.

SOFC (Solid Oxide Fuel Cell) Ni-YSZ anode was fabricated by the spark plasma sintering (SPS) process and its microstructure and electrical properties were investigated in this study. The spark plasma sintering process was carried out at for holding time of 5 min under 40 MPa. To fabricate Ni-YSZ anode, the SPS processed specimens were reduced at under atmosphere. The reduced specimens showed relative density of according to sintering temperature. And also, the electrical conductivity of reduced specimens after sintering at 900 and showed (S/cm) values at the measuring range of .

목 적 : 굴절이상도 및 굴절이상과 안광학 상수의 상호연관성을 알아보기 위하여 수행되 었다. 방 법 : 안질환이 없는 건강한 젊은 성인 68명, 68안(우안)을 대상으로 Topcon KR-8800 을 사용하여 등가구면 굴절력, 각막 굴절력, 각막 곡률반경을 측정하였다. 전방 깊이, 수정체 두께, 유리체 깊이, 안축장 길이는 A-Scan Ultrasonography를 사용하여 측정하였으며, AL/CR비는 안축장 길이를 평균 중심 각막 곡률반경으로 나누어 계산하였다. 결 과 : 등가구면 굴절력은 -3.55±2.84D(남자 -3.73±3.21D, 여자 -3.40±2.55D)로 남녀사이의 유의한 차이가 없었다. 전체 68안 중 근시 60안(88.24%), 정시 6안(8.82%), 원 시 2안(2.94%)으로, 등가구면 굴절력은 근시 -4.02±2.69D, 정시 -0.33±0.13D, 원시 +0.88±0.18D로 측정되었다. 원주 굴절력이 0.75D 이상은 35안(51.47%)으로, 직난시 33안 (94.29%), 사난시 2안(5.71%)으로 나타났으며 전난시와 각막난시는 높은 음의 상관관계를 보였다(r = -0.84, p < 0.0001). 굴절이상에 의한 AL/CR비는 정시 2.93±0.02, 근시 3.12± 0.14, 원시 2.87±0.01로 측정되었으며, 등가구면 굴절력과 가장 높은 상관관계를 나 타냈다(r = -0.88, p < 0.0001). 결 론 : 굴절이상은 안축장 길이에 의한 것이 중요한 원인으로 본 연구에서도 안축장 길 이는 등가구면 굴절력과 높은 음의 상관관계를 보였으며, AL/CR비가 등가구면 굴절력과 가 장 높은 음의 상관관계를 보여 선행연구와 일치하였다. 난시분포는 도난시와 사난시에 비해 직난시가 많은 것으로 나타났으며 전난시와 각막난시는 높은 음의 상관관계를 보여 전난시의 중요한 원인이 각막난시에 의한 것임을 알 수 있었다.

DNA methylation is one of the reasons for poor survival of clone animals. The OCT-4 gene is essential for maintaining pluripotency of embryonic stem (ES) cells and early embryos. We previously reported that the 5'-promoter region of Oct-4 gene was a target of DNA methylation and the methylation status was changed variously during embryonic development in bovine. The study conducted to examine the expression and methylation pattern of tissue-dependent differentially methylated region (T-DMR) of Oct-4 gene in bovine somatic cell nuclear transfer (SCNT) and in vitro fertilization (IVF) blastocysts. The Oct-4 gene expression was evaluated by RT-PCR and fluorescence immunocytochemistry. The methylation pattern of T-DMR was analyzed using restriction mapping and bisulfite sequencing methods. The Oct-4 transcripts were highly expressed in IVF, while they were not expressed in SCNT. The Oct-4 protein was not detected or expressed at very low level in SCNT, the intensity of Oct-4 protein, however, was strong in IVF. On the other hand, the T-DMR of Oct-4 gene was hypermethylated in SCNT compared to that of IVF. These results suggested that expression and the failure of demethylation of Oct-4 gene was closely associated with incomplete development of SCNT embryos.

Microstructure and mechanical properties of WC-3wt% Co cemented carbides, fabricated by a sparkplasma sintering (SPS) process, were investigated in this study. The WC-3wt%Co powders were sintered at900~1100oC for 5min under 40MPa in high vacuum. The density and hardness were increased as the sinteringtemperature increased. WC-3wt%Co compacts with a relative density of 97.1% were successfully fabricated at1100oC. The fracture toughness and hardness of a compact sintered at 1100oC were 21.6MPa·m1/2 and4279Hv, respectively.

최근 전세계적으로 3차원 객체 모델(3D Object Model)을 활용하여 건설 프로젝트의 생애주기 동안 참여주체들이 효과적으로 정보를 공유하고 관리할 수 있도록 하는 가상건설시스템의 개발이 활발히 진행되고 있다. 이 논문에서는 가상 공간에서 토목구조물의 해석 및 설계를 위하여 반드시 필요한 구조물의 3차원 객체모델과 구조해석 시스템과의 인터페이스 설계를 다루었다. 3D 객체모델 생성에 필요한 인관 매개변수모델링 기법과 구조물의 구조해석에 필요한 다양한 변수를 고려할 수 있는 제품계층구조(product breakdown structure, PBS) 구축 방안을 제시하였다. PBS 구성시 3D 객체 모델 정보로부터 구조 해석에 필요한 속성 정보만을 추출하여 해석 프로그램에 적용이 가능하게 하였으며, 협업작업에 의해 결정되는 여러 수치를 다시 객체정보로 추가 작업 없이 전달하여 3D 객체 모델과 연동되어 변화될 수 있는 인터페이스 프로그램 설계 방안을 제안하였다. 향후 이 연구의 결과를 기반으로 개발된 3D 객체모델과 구조해석 시스템의 인터페이스 프로그램이 가상건설 시스템 구현에 효과적으로 사용될 수 있을 것으로 판단된다.

인위적인 토양내 수분처리 결과 물푸레나무와 들메나무 모두 6월〈8월〈9월로 갈수록 엽록소 함량이 증가하였다. 생육기간이 지나는 동안 엽록소 a는 0.89mg/g에서 1.67mg/g로, 엽록소 b는 0.18mg/g에서 0.44mg/g을 나타냈으며, 두 수종 모두 6월보다 8월과 9월에 높은 함량 증가를 보였다. 두 수종의 광합성율을 보면, 물푸레나무는 각 토양수분 처리구마다 광합성율의 차이를 보였으며, 충분한 토양수분처리구(90~78%)의 묘목이 상대적으로 낮은 토양수분조건에서 자란 묘목보다 높은 경향을 나타냈다. 들메나무 역시 물푸레나무와 비슷한 경향을 보였으며, 토양수분이 높을수록 광합성률이 높게 나타났고, 감소할수록 광합성률이 감소하였다. 광합성율의 생육시기별 변화는 두 수종 모두 9월〉8월〉6월 순으로. 9월에 상대적으로 높은 광합성률을 나타냈다. 이로 미루어보면 두 수종은 생장시기에 상관없이 수분함량이 높은 처리구에서 광합성이 활발히 이루어지는 것으로 생각된다.

전라북도 복분자 주산지인 익산, 정읍, 고창을 대상으로 복분자에 발생하는 해충 종류 및 발생양상에 대하여 조사하였다. 복분자에 발생하는 주요 해충은 차응애, 잎말이나방 등 총 37종이 조사되었고, 문제해충은 잎말이나방, 차응애, 톱니무늬애매미충, 박쥐나방, 무궁화잎밤나방, 검정배줄벼룩잎벌레, 대만총채벌레, 장미흰깍지벌레 등 8종이었다. 수확전 해충으로는 차응애 등 35종이 발생하였고, 차응애, 잎말이나방, 대만총채벌레, 톱니무늬애매미충, 검정배줄벼룩잎벌레 5종이 주요해충으로 차응애 피해가 컸으며, 수확후에는 무궁화잎밤나방 등 13종이 발생하였고, 차응애, 무궁화잎밤나방, 박쥐나방, 톱니무늬애매미충, 장미흰깍지벌레 5종이 주요 해충으로 무궁화잎밤나방과 박쥐나방 피해가 심하였다. 8종의 주요해충 중 차응애는 수확전·후 모두 심하게 발생하였으며, 6월하순, 8월하순, 10월중순 3회 발생피크를 보였고, 박쥐나방은 10월상순 1회, 무궁화잎밤나방은 7월하순과 10월상순 2회 발생피크를 보였으며, 박쥐나방과 무궁화잎밤나방은 수확후에 심하게 발생하였다.

In this study, tantalum (Ta) compacts were fabricated in a spark plasma sintering (SPS) process and their microstructure and mechanical properties were investigated. Ta compacts with a density of 99% were successfully fabricated by controlling the sintering conditions of the current and the temperature. The density and hardness were increased as the sintering temperature increased. The Ta2C compound was observed at the surface of the compacts due to the contact between the Ta powder and graphite mold during the sintering process. The main fracture mode showed a mixed type with intergranular and transgranular modes having some roughness.