A timber lattice roof, which has around 30m span, was constructed. In order to figure out the realistic buckling load level, the structural analysis of this roof structure was performed especially by stiffness of connection with various asymmetric snow load. Due to the characteristics of application of snow load, the load combinations of snow should be considered not only global area but also local part so that the critical buckling load could be observed as easy as possible. Geometrical imperfection was simulated to consider inaccurate shape of structure. And then nonlinear analysis were performed. Finally, this paper could investigate that the asymmetric snow load with the lower level stiffness of connection decreased the level of buckling load significantly.

본 연구는 중국 C2C 중고거래 플랫폼의 사용자 연구대상으 로 정보기술 수용과 사용 태도에 대해 설명력이 높다고 인정받 고 있는 기술수용모델(TAM)을 토대로 핵심 변수 외 다양화된 정보시스템 환경을 반영하는 변수로 주목받고 있는 지각된 유 희성을 추가 변수로 지정하였다. 본 연구는 가설을 검증하기 위해 중국 C2C 중고거래 플랫폼에 대한 경험 있는 사용자들을 대상으로 조사를 실시하였다. 총 400부의 설문지를 배포하였으 며 회수된 설문지를 선별하여 총 362부 유효 설문지가 선출되 었다. 또한, C2C 중고거래 플랫폼 특성 변인인 정보 대칭성을 규명하고, 이를 바탕으로 정보의 이용 가치를 높이고 활성하기 위한 전략 방향에 시사점을 제시하는 데 그 목적을 둔다. 그리 고 마케팅 연구의 학문적 발전에 기여하고 기업에는 중고 플랫 폼을 활용한 마케팅 전략 수립 시 실무적인 도움을 제공할 수 있을 것으로 기대한다.

A microfluidic pump is a key component to controllably actuate fluids in Lab on a chip devices. To overcome technical issues of a diaphragm-type pump, a valveless nozzle-diffuser type pump was developed by utilizing the different flow resistance to control a dominant flow direction by means of diaphragm actuation. In this work, based on the operating mechanism of the nozzle-diffuser type pump, we propose a new concept of a valveless pump which can generate asymmetric flow through a pump chamber. In the proposed valveless pump, asymmetric flow path structures play a role of a nozzle-diffuser installed to a pump chamber. To validate the concept of the proposed valveless pump, we conducted CFD simulations for different geometries of the flow path structures. Based on the CFD simulations, we found that the dominant flow direction can be selectively manipulated by the pump actuation and an optimal shape of the asymmetric flow path structure was proposed to maximize the net mass flow rate through the pump chamber.

Most of the predictions using machine learning are neutral predictions considering the symmetrical situation where the predicted value is not smaller or larger than the actual value. However, in some situations, asymmetric prediction such as over-prediction or under-prediction may be better than neutral prediction, and it can induce better judgment by providing various predictions to decision makers. A method called Asymmetric Twin Support Vector Regression (ATSVR) using TSVR(Twin Support Vector Regression), which has a fast calculation time, was proposed by controlling the asymmetry of the upper and lower widths of the ε-tube and the asymmetry of the penalty with two parameters. In addition, by applying the existing GSVQR and the proposed ATSVR, prediction using the prediction propensities of over-prediction, under-prediction, and neutral prediction was performed. When two parameters were used for both GSVQR and ATSVR, it was possible to predict according to the prediction propensity, and ATSVR was found to be more than twice as fast in terms of calculation time. On the other hand, in terms of accuracy, there was no significant difference between ATSVR and GSVQR, but it was found that GSVQR reflected the prediction propensity better than ATSVR when checking the figures. The accuracy of under-prediction or over-prediction was lower than that of neutral prediction. It seems that using both parameters rather than using one of the two parameters (p_1,p_2) increases the change in the prediction tendency. However, depending on the situation, it may be better to use only one of the two parameters.

Poly(vinylidene fluoride) (PVDF) 막은 내구성 및 열적⋅화학적 안정성 등의 물성은 우수하나 소수성이 커서 수투과도가 낮고 단백질 및 유기물에 의한 막오염이 쉽게 발생한다. 본 연구에서는 PVDF 막의 내오염성을 개선시키고자 바이오 기능성 물질인 β-cyclodextrin (β-CD)을 PVDF 막 구조 내에 분산 함침시킨 PVDF/β-CD 혼합기질 비대칭막을 상변환 법을 통해 제조하고, β-CD 함침량에 따른 순수 투과 유속(PWF) 측정과 BSA 용액을 대상으로 한 막여과 실험을 수행하여 내오염성 특성을 평가하였다. 이 결과 PVDF 고분자 매질 내에 β-CD를 함침시키면 막의 친수성을 증가시켜 접촉각을 감소시키고 이로 인해 내오염성을 향상시킬 수 있었다. β-CD 함침량이 2 wt%인 도프용액을 사용하여 제조된 PVDF/β-CD 혼합 기질 비대칭막의 PWF는 64 L/m2⋅h, BSA 배제도는 95%를 나타내었으며, β-CD를 첨가하지 않고 제조된 pristine PVDF 막에 비해 투과 유속 향상성이 최대 80%에 달해 β-CD를 첨가시킴으로서 PVDF 막의 내오염성을 증가시킬 수 있었다.

목적: 본 연구는 국내의 기성 돋보기가 광학적 기준에 부합여부와 조제가공 상태의 대칭성에 대하여 측정 평가하고자 하였다. 방법 : 국내에 유통 중인 한 종류의 기성 돋보기 100개(+1.00, +2.00,+3.00 와 +4.00 D)를 대상으로 측정하였다. 기성 돋보기의 광학적 품질은 렌즈 굴절력, 광학중심점간 거리, 광학중심점높이가 측정되었다. 측정된 값의 허용오차는 ISO 8980-1, ISO 16034:2002 그리고 RAL-RG-915를 기준으로 분석되었다. 인위적으로 발생한 수평수직 프리즘은 광학중심점간 거리와 남녀 평균동공간 거리의 오차로 프렌티스 공식으로 계산하였다. 추가적으로 기성 돋보기의 조제과정상 오류로 인한 비대칭성은 단안광학중심점간 거리와 두 렌즈간의 광학중심점간 높이의 오차로 측정하였다. 결과 : 100개의 기성 돋보기 중 23%가 ISO 8980-1의 렌즈굴절력 기준을 만족하지 못하였다. 본 연구의 기성 돋보기의 광학중심점간 거리는 62.06±1.41 mm이었으며, 남녀의 평균 동공간 거리와의 오차로 발생하는 수평프 리즘은 남성은 0.53±0.54 △ BI(0.18~1.06 △), 여성은 0.98±0.68 △ BI(0.37~1.78 △). 테의 중심에서 각 렌 즈광학중심점까지의 거리에서는 85%가 최소 1 mm이상의 오차를 보였다. 기성 돋보기 양쪽 렌즈 간 광학중심점 높이 차이는 1.26±0.83 mm이었으며, 이로 인한 발생되는 수직프리즘은 0.12~0.45 △이었다. 결론 : 많은 수의 기성 돋보기가 요구되는 광학적 품질에 미달되었다. 기성 돋보기는 착용자 개인별 안면형상을 고려하지 못하기 때문에, 광학중심점간 거리와 동공간거리의 오차가 발생하고 이로 인한 많은 정도의 수평프리 즘이 발생하였다. 따라서 광학적으로 잘못된 기성 돋보기의 사용은 시각적 편안함을 제공하는 것보다는 시각적 부담을 야기할 수 있을 것이며, 이런 문제를 방지하기 위하여 전문가를 통한 확인 과정이 반드시 필요하다.

최근 사장교 주탑의 심미성이 강조되고 있기 때문에 유한요소해석을 통해 안전성을 확보하여야 한다. 콘크리트 주탑은 케이블의 장력으로 인해 균열이 발생할 가능성이 높기 때문에 균열을 감소시키고, 구조적 안전성에 대한 계획이 필수적이다. 이 연구에서는 사장교 콘크리트 주탑의 균열제어 방법을 제시하고 유한요소해석을 통해 구조적 안전성을 검증하였다. 균열 위치는 사전해석을 통해 검토하였고, 적절한 균열제어방법이 제안되었다. 또한, 구조해석을 통해 보강 후 주탑의 안전성을 확인하였다.

PURPOSES : This study aims to investigate the factors that affect the practical condition of the convergence and convergence behaviors of the asymmetric transportation equilibrium problem (ATEP). METHODS : To achieve this objective, a real network experiment is critical because the crux of the problem associated with the ATEP is the difficulty of verifying the unique condition in real networks owing to asymmetric modeling. The study employed a numerical approach to deal with this problem because analytical derivation based on small networks has a limitation in extending its findings to practical applications. The study addressed the problems using large real networks and different types of interactions, including links and modes. An investigation of the factors that have the potential to affect the convergence of the problem was conducted with the solution algorithm, which is the double projection method. RESULTS : The study presented a partial answer to the question of whether the ATEP's convergence condition is too strong. In link interactions, demand intensities and symmetric features within the cost function along with the network configuration were determined to relax the convergence condition. In mode interactions, the degree of overlap of the route composition and the controlled asymmetric interactions in the cost function were determined to affect the convergence condition. CONCLUSIONS : The results suggested that the modeling of link interactions for a more complicated transportation system design enabled the modeling of complex asymmetric interactions as long as the demand intensity of the network was not strong. In the case of mode interactions, whereas it was not possible to control the route composition, it was considered possible to a degree where the use of a distinct route was observed for each class (for example, designated truck lanes).

Chlorhexidine is a cationic bisbiguanide with broad antibacterial activity, and diverse activity encompassing gram-positive and gram-negative bacteria, yeasts, dermatophytes, and some lipophilic viruses. Chlorhexidine alters the permeability of the bacterial membrane. They also neutralize periodontal pathogens such as Streptococcus aureus, Porphyromonas gingivalis, and Prevotella intermedia. Porphyromonas gingivalis were cultured to isolate the Porphyromonas gingivalis outer membranes (OPG). Also, OPG were used to prepare large unilamellar liposomes with total lipids (OPGTL) extracted and prepared with the phospholipids mixture (PL). The effect of chlorhexidine digluconate on cell membrane kinetic changes was investigated using fluorescence polarization of n-(9-anthroyloxy) stearic acid with different rotational mobility depending on the probe substitution position (n) in the membrane phospholipid aliphatic chain. Chlorhexidine digluconate increased the hydrocarbon rotational mobility interior of the OPG, OPGTL and PL, but native and model membranes interfacial mobility were decreased. The sensitivity to increasing chlorhexidine digluconate effect on rotational mobility was proportional to the depth of probe position in descending order of 16-AP, 12-AS, 6-AS and 9-AS. Chlorhexidine digluconate disordering or ordering the effects on the membrane lipids may cause its bacteriostatic and bacteriocidal actions.

본논문에서는 FTA 국내보완대책의 일환으로 추진되고 있는 폐업지원제도의 정부실패 사례를 살펴보고 그 원인을 규명하였으며, 더 나아가 이를 개선하기 위한 방안을 제시하였다. 1. 폐업지원제도는 FTA 이행에 따른 시장개방과정에 국내 농업의 경쟁력 제고와 농가 소득안정을 목적으로 정부가 동원한 정책수단의 하나임. 그러나 제도 운영과정에서 정부실패 사례가 나타남. 2. 폐업과정에서 신규 농가가 진입하여 정책효과가 저감되고, 예상보다 많은 농가가 폐업함으로써 해당 산업의 가치사슬이 왜곡되고, 폐업 후 타 작목으로 전환하면서 풍선효과가 나타나 간접피해를 유발하고, 생산규모가 자연적으로 감소하는 가운데 인위적인 폐업지원으로 비효율적 예산 투입이 이루어지고, 지원금 단가가 높아 과도한 폐원을 유도함. 3. 이와 같은 정부실패의 주요 원인은 정책 이해관계자 사이의 정보비대칭과 정보 부족임. 결국, 폐업지원제도의 운영과 정에서 나타난 정부실패를 해소하고 제도의 효과를 높이기 위해서는 제도 이해관계자 사이의 정보비대칭 혹은 정보 부족문 제를 해소해야 함. 4. 구체적인 대안으로 생산·가격·소득정보에 대한 이해관계자의 접근성을 높임과 동시에 사후 컨설팅사업 병행, 수입피해를 소명한 농가에 한해 지원하는 ‘신청주의’ 도입 등이 필요함.

The purpose of this paper is to empirically investigate whether asymmetric price transmission exists in the distribution stage of farmed olive flounder market. For the analysis, time series data were used for the producer prices of Jeju and Wando, and the wholesale prices of Incheon, Hanam and Busan. Through the Granger causality test, the causal relationship from the producer price to the wholesale price was derived and the asymmetric price transmission was analyzed using the autoregressive distributed lag model (ARDL). As a result of the analysis, it was found that there is a phenomenon of ‘positive asymmetric price transmission’ from the producer price to the wholesale price. This result can be one evidence that excess profits are received in the intermediate distribution stage, and can be said to be a result showing the incompleteness and inefficiency of the distribution structure of the farmed olive flounder. In the future, it is required to establish an information-sharing system in all stages of production, distribution, and consumption that can create a competitive environment for distribution participants and resolve information asymmetry. Also, it is necessary to review the distribution center specializing in live fish from the viewpoint of the establishment of new distribution channels and sales diversification strategy under the rapidly changing fisheries environment.

본 연구에서는 생체모방형 비대칭 분리막 제조방법인 사각펄스양극산화법의 비대칭성 한계를 극복하기 위해 최근 보고된 셀렌산 전해액을 이용하고 표면개질에 따른 정류특성을 평가하였다. 분리막의 비대칭 원뿔형 채널은 최소직경이 10 nm이고 최대직경이 50 nm이며 길이가 5 μm이었다. 분리막의 정류특성은 기존 황산 전해액에서 제작된 것보다 높았으며 +1 V에서의 전류가 -1 V일 때보다 최대 2.9배를 나타내었다. 또한, 실란화 반응을 이용한 표면개질을 통해 술폰산기를 도입한 분리막은 반대로 -1 V에서의 전류가 +1 V일 때보다 전류의 최대 4.2배인 정류특성을 나타냈다. 실험에 대한 이론적 증명은 2D 모델에 수치해석 결과를 제시함으로써 뒷받침되었다. 본 연구의 결과는 서로 다른 정류방향을 갖는 두 종류의 이온 정류 분리막을 손쉽게 제작할 수 있는 방법을 제시하며 이온의 이동을 제어하기 위한 다양한 연구 분야에 활용될 수 있을 것으로 기대된다.

Menton (Me) deviation is commonly used for diagnosing facial asymmetry. This study compared angle and distance measurement in determining the severity of Me deviation for facial asymmetry diagnosis. Three-Dimensional Computed Tomographic(3D CT) images of 32 patients (mean age 22.5yrs, SD 3.4yrs; 16 male, 16 female) with facial asymmetry were selected for this study. Angle and distance of Me deviation in each patient were obtained and the severity of Me deviation was determined according to the angle and the distance measurement. The severity of Me deviation by angle and distance measurement was compared and statistical analysis was performed. Eight (25%) showed disagreement in severity of Me deviation between the two measurements. The kappa coefficient on the two measurements was 0.67, showing substantial agreement. It is suggested that both angle and distance measurement be performed in determining severity of Me deivation.

This paper examined the dynamic instability of a shallow arch according to the response characteristics when nearing critical loads. The frequency changing feathers of the time-domain increasing the loads are analyzed using Fast Fourier Transformation (FFT), while the response signal around the critical loads are analyzed using Hilbert-Huang Transformation (HHT). This study reveals that the models with an arch shape of h = 3 or higher exhibit buckling, which is very sensitive to the asymmetric initial conditions. Also, the critical buckling load increases as the shape increases, with its feather varying depending on the asymmetric initial conditions. Decomposition results show the decrease in predominant frequency before the threshold as the load increases, and the predominant period doubles at the critical level. In the vicinity of the critical level, sections rapidly manifest the displacement increase, with the changes in Instantaneous Frequency (IF) and Instant Energy (IE) becoming apparent.

This study aimed to measure ramal lengths and angles on panoramic radiography applying a polar coordinate system for analyzing facial asymmetry within normal range. Panoramic radiographs taken from 15 males and 15 females (mean age 31.33±3.7 yrs in males and 28.87±2.72 yrs in females) with symmetric-looking faces were selected. The polar coordinate system, length of condylar and ramal height and angles between the ramus tangent and the connecting line of the most inferior point of bilateral orbital rim were measured from panoramic radiographic images. Bilateral differences in the ramal and condylar heights and angles were determined by asymmetric index. The polar coordinate applied for analyzing facial asymmetry uses length and angle measure. The normal range of facial asymmetry was measured using mean and standard deviation of asymmetry index of length and angle measure. A new analysis method using polar coordinate system on panoramic radiograph may provide more accurate analysis for facial asymmetry.