The FIMS(Far-ultraviolet IMaging Spectrograph), the main payload onboard the first Korean Science Technology SATellite, STSAT-1, has performed various astronomical observations, including the Cygnus Loop, Vela supernova remnants, LMC(Large Magellanic Cloud), since its launch on September 2003. It has been found that the attitude information provided by spacecraft bus system has the errors of more than about 10-15 arcmins due to the time offset problem and errors in attitude knowledge. We develop an algorithm for correction of position errors in FIMS data. The aspect for the FIMS data is determined by comparing the positions of observed bright stars with the Tycho-II and TD-1 catalogs. The position errors of the bright stars along the scanning ( γ) and spatial (δ ) directions were considered as functions of δ, ignoring errors in position angle. The corrected positions of the bright stars coincided very well to their Tycho-II and TD-I positions. The correction algorithm is essential for the FIMS data analysis, and is being used for the FIMS data analysis.

In this study, dietary Rhus verniciflua Stockes were feeded on the porks and Hanwoo beef to determinate sanitation effects. this experiment was performed to measure oxygen contents and total flavor compounds of pork and beef inoculated Pseudomonas aeruginosa in headspace with SPME-GC. The headspace oxygen contents in Hanwoo beef were no difference on the diet supplementation ratio of Rhus verniciflua Stokes during storage at 5℃. Headspace oxygen contents of teratment dieted for 5 and 6months were higher than that of treatment dieted for 3 and 4months. No remarkable difference was observed in headspace oxygen contents in pork between control and treatment during storage at 0℃. Oxygen contents in pork of treatment diet containing 4% Rhus verniciflua Stokes was higher than that of treatment were lower than that of control on Hanwoo beef. Flavor compounds were the lowest in diet supplemented 6% of Rhus verniciflua Stokes during 4 months. Flavor compounds of pork is no change at 0℃. The longer storage periods It had the more increasing total flavor compounds and Rhus verniciflua Stokes supplement ratio had no effects on change of total flavor compounds. Such as this experiment, Flavor compounds and oxygen contents in headspace could be analyzed by SPME-GC method promptly and easily in accordance with, it is expected to apply SPME-GC method to evaluation of food quality.

The obsective of this study is to compare domestic chicory root powder with foreign chicory fructooligosaccharide (FOS) in effect of microflora in piglet feces and to sustitude domestic chicory for foreign chicory. The prebiotic effects of FOS from chicory (Chicorium intybus) was evaluated for livestock feed supplement. Chicory is a turberous plants containing inulin ,with high fructose contents its root. Piglets were fed one of three diets for 5 weeks, a control diet, a basal diet containing 0.2% of foreign chicory FOS and a basal diet containing 0.3% of domestic chicory root powder. Prebiotic effects of foreign chicory FOS and domestic chicory root powder were examined for their effects on the growth of fecal microorganism with piglet along with measuring pH changes of collected piglet feces during experimental periods (5 weeks). The results showed that the growth of Lactic acid bacteria (LAB) was significantly increased after feeding chicory FOS and chicory root powder supplemented feeds, and the increased occupancy ratio of LAB in the feces was observed. However, the occupancy ratio of Escherichia coli in piglet feces was continuously declined after treating feeds containing chicory FOS and root powder. No remarkable changes were observed in the growth of Clostridium perfringens throughout the experimental periods. A significantly decreased pH of the collected feces was observed after feeding chicory FOS and chicory root powder supplemented feeds. It was noteworthy that feeding chicory root powder more effectively decreased pH levels than those of chicory FOS. As a result of this it was expected that FOS from chicory could be applicable to pigs as prebiotics.

This study developed the planning process for technical management of engineering project applying systems engineering process in order to correctly design technical management activities early during the system development projects. The developed process describes a systemic design process of a product to be developed as well as the development process and the personnel team of project organization. As an outcome of the process implemented by a Model-Based Systems Engineering(MBSE) software, a systems engineering management plan(SEMP) and a risk management plan can easily be produced.

This study was focused on the maximization of flame-retardancy of polyesters by a synergism of simultaneously introduced chlorine and phosphorus into polymer chains of modified polyesters. To prepare modified polyesters, reaction intermediates, TD-adduct (prepared from trimethylolpropane /2,4-dichlorobenzoic acid (2,4-DCBA)) and TMBO (prepared from tetramethlene bis (orthophosphate)), were prepared first, then condensation polymerization of the prepared intermediates, adipic acid, and 1,4-butanediol were carried out. In the condensation polymerization, the content of phosphorus was fixed to be 2wt%, and the content of 2,4-DCBA that provides chlorine component was varied to be 10, 20, and 30wt%, and we designated the prepared modified polyesters containing chlorine and phosphorus as ABTTs. The prepared intermediates and modified polyesters were characterized with FT-IR, NMR, GPC, and TGA analysis. Average molecular weight and polydipersity index of the preparation of ABTTs were decreased with increasing 2,4-DCBA content because of the incease in hydroxyl group that retards reaction. We found that the thermal stability of the prepared ABTTs increased with chlorine content at high temperatures.

Dual frequency acoustic pinger(AP) was manufactured to reduce study effect by long-term use of developed single frequency AP to prevent cetacean bycatch. Directivity characteristic of transducer was the omnidirectional pattern which showed less than ±3dB the change range of sensitivity on the beam pattern of right and left. Source power level(SPL) was 1384311pa with epoxy window before casing however after casing 1170B11Pa at sea. Dual frequency Af was tested to identify the avoidance behavior of bottlenose dolphin by its working. However the efficiency of dual frequency AP about the study effect was verified experiment repeatedly using single and dual frequency AP.

Reaction intermediates PCP/BZA (PBI) and tetramethylene bis(orthophosphate)(TBOP) were synthesized from polycaprolactone (PCP) and benzoic acid (BZA) and from pyrophosphoric acid and 1,4-butanediol, respectively. Benzoic acid modified polyesters containing phosphorus (APTB-S, -10, -15) were synthesized by polycondensation of the prepared PBI (containing 5, 10, 15wt% of benzoic acid), TBOP, adipic acid, and 1,4-butanediol. Network structured PU flame-retardant coatings (APHD) were prepared by curing the synthesized benzoic acid modified polyesters containing phosphorus (APT B - 5 , -10, -15) with hexamethylene diisocyanate (HDI)-timer. From the TGA analysis of APTBs, it was found that the afterglow decreased with the amount of BZA content at the high temperatures. With the introduction of BZA, the film viscosity and film hardness of APHD decreased. With the introduction of caprolactone group, the flexibility, impact resistance, accelerated weathering resistance of APTBs increased. Flame retardancy of the coatings was tested. In a vertical burning method, APHD shows 210~313 seconds, which indicates that the coatings are good flame-retardant coatings. Moreover, the amount of afterglow and flame retardancy of the coatings are decreased with increasing BZA content.

Room temperature cure type of acryl-urethane coatings with high solid content were prepared in this study. Acrylic resins with 80% solid content were cured with hexamethylene diisocyanate (Desmodure N-3600). The cure time of prepared coatings BEHCC-84 (BEHC-84 : Tg=0℃) and BEHCC-87 (BEHC-87 : Tg=30℃), measured by rigid-body pendulum method, was recorded 8.3 hours and 3.8 hours, respectively. Dynamic viscoelastic experiment also revealed the glass transition temperature of BEHCC-84 and BEHCC-87 to be Tg=40.3℃ and Tg=43.3℃, respectively. It was found that the adhesion and flexural properties among various propeties of coatings were enhanced by the incorporation of caprolactone acrylate monomer into the acrylic resins.