(Bi1/2Na1/2)TiO3 (BNT)-based ceramics are considered promising candidates for actuator application owing to their excellent electromechanical strain properties However, to obtain large strain properties, there remain several issues such as thermal stability and high operating fields. Therefore, this study investigates a reduction of operating field in (0.98-x)Bi1/2Na1/ 2TiO3-0.02 BiAlO3-xSrTiO3 (BNT-2BA-100xST, x = 0.20, 0.21, 0.22, 0.23, and 0.24) via analyses of the microstructure, crystal structure, dielectric, polarization, ferroelectric and electromechanical strain properties. The average grain size of BNT-2BA- 100xST ceramics decreases with increasing ST content. Results of polarization and electromechanical strain properties indicate that a ferroelectric to relaxor state transition is induced by ST modification. As a consequence, a large electromechanical strain of 592 pm/V is obtained at a relatively low electric field of 4 kV/mm in 22 mol% ST-modified BNT-2BA ceramics. We believe that the materials synthesized in this study are promising candidates for actuator applications.

In recent years, there has been an increase in the morbidity of gastritis in Korea due to lifestyle factors mostly changes in eating habits and stress. Gastritis is more likely to progress to gastric cancer, and therefore it is important to prevent and manage gastritis through lifestyle adjustment and treatment at an early stage. In this study, cabbage, which was found to be effective in gastritis, was mixed and fermented with other crucifer plants such as kale and broccoli to evaluate the overall efficacy of fermented brassica puree on alcoholic acute gastritis. Based on our results, fermented brassica puree alleviated gastric injury induced by 150 mM HCl/60% ethanol. In addition, it was confirmed that PGE2, a gastric mucosal protective factor, was increased, and other positive effects such as an increase of MUC1 and regulation of PKC were observed. The results of this study suggest that fermented brassica puree can relieve acute alcoholic gastritis by regulating PGE and the expression of MUC1, a gene related to mucus secretion, and activating PKC, which is related to mucosal cell activity.

본 연구에서는 단면설계 및 열 교환 장치 위치 변경을 통해 온실의 구조 변경을 진행하였으며, 선행연구를 통해 개발된 모델을 근간으로 하여 개선 여부에 따른 온실 내부 환경을 예측하였다. 단면형상과 열 교환 장치의 개선 후 유속 변화에 따른 시뮬레이션 분석을 진행하였으며, 이 때 온도와 균일도는 각각 평균 0.65°C, 0.75%p 상승함을 확인하였다. 해석대상 온실과 같은 소규모 온실의 경우 방열관의 난방성능 개선보다 FCU에 의해 형성되는 공기 유동이 균일한 환경 조성에 더 큰 영향을 미치는 것으로 판단된다. 개선 전 ‧ 후 온실에 환기시스템 적용 시 공기 유동 특성 분석을 위해 시뮬레이션 분석을 진행하였다. 공기 유동과 공기령은 유사한 분포를 보였으며, 개선 후 온실의 공기령이 개선 전 온실 대비 18초 낮게 나타났다. 개선 전 ‧ 후 온실 시뮬레이션 분석 결과 전체적으로 개선된 온실에서의 평균온도 및 온도 균일도 상승, 최대편차 감소 등 내부 환경의 균일성이 향상됨을 확인하였다. 선행연구로 개발 된 모델은 형상 변경, 열 교환 장치 위치 변경 등에 따라 변화하는 온실 내부 환경을 예측할 수 있음을 확인하였으며, 온실 설계, 온실 내 난방시스템 설계 등의 분야에 적용 가능할 것으로 판단된다.

2017년 이후 강원도 고랭지배추는 클로버씨스트선충에 의한 피해를 받아 왔다. 저항성 배추 품종 재배는 씨스트선충 피해를 줄일 수 있는 가장 경제적인 방제 방법이다. 본 연구에서는 클로버씨스트선충 저항성 배추 신품종 육성을 위한 육종 소재 탐색을 위해 배추류 유전자원 총 57 자원을 대상으로 클로버씨스트선충에 대한 저항성 검정을 수행하였다. 배추 (Brassica rapa subsp. pekinensis), 순무 (B. rapa), Brassica sp., 갓 (B. juncea), 겨자류 (B. carinata, B. tournefortii), 경수채 (B. rapa subsp. nipposinica), 다채 (B. rapa subsp. narinosa), 평지 (B. rapa var. perviridis), 루타바가 (B. napus var. napobrassica), 로켓샐러드 (Eruca sativa) 54자원은 뿌리에 클로버씨스트선충 암컷이 300개 이상 증식되어 매우 감수성인 것으로 나타났다. 겨자류 2자원 (B. carinata, B. tournefortii)도 클로버씨스트선충 암컷이 각각 144개, 110 개 증식되어 감수성인 것으로 나타났다. 반면, 겨자류 중 에서 African mustard (B. tournefortii, 씨앗은행 관리번호 IT218058)는 클로버씨스트선충 암컷이 평균 4±1.8로 증 식되어 저항성인 배추류 유전자원인 것으로 나타났다. 본 연구에서 선발된 African mustard (IT218058)는 클로버씨 스트선충 저항성 배추 품종 육성을 위한 육종 소재로 활용 가능할 것으로 판단된다.

육상 및 해상에서의 화재 사고는 심각한 인명피해를 발생시키며 특히 해양 플랜트 및 선박의 특성 상 밀폐공간으로 인한 질식 사고 사망률이 육상보다 현저히 높다. 이러한 질식사고를 예방하기 위하여 화재에서 발생하는 유독가스를 외부로 배출할 수 있는 환기용 팬의 설치가 필수적이나, 해양화재의 규모를 고려하였을 때 대형 환기용 팬의 설치는 해양 구조물 특성상 용이하지 않다. 따라서 본 연구 에서는 DC 전기장을 인가하여 화재 유독가스를 제어하는 새로운 개념의 소방기술을 개발하고자 한다. 화재 발생 시 대부분의 화염은 화학 이온화로 인해 양전하와 음전하를 다수 함유하고 있고, 이때 전기장을 인가하게 되면 로렌츠 힘에 의해 “이온풍”이 발생하게 된다. 이러한 이온풍을 활용하여 일반건축물과 선박의 단열재로 많이 사용되는 종이와 스티로폼을 연소하여 발생되는 화재연기를 인위적으로 제어하는 실험적 연구를 수행하였다. 실험 결과, ± 5 kV 이상의 직류전압을 인가하였을 때 화재연기를 인위적으로 제어할 수 있었고, 양전압 보다 음전압을 인가하였을 때 상대적으로 효과적인 제어가 가능하였다.

In this study, a drifting test using a experimental vessel (2,966 tons) in the northern waters of Jeju was carried out for the first time in order to obtain the fundamental data for drift. During the test, it was shown that the average leeway speed and direction by GPS position were 0.362 m/s and 155.54° respectively and the leeway rate for wind speed was 8.80%. The analysis of linear regression modes about leeway speed and direction of the experimental vessel indicated that wind or current (i.e. explanatory variable) had a greater influence upon response variable (e.g. leeway speed or direction) with the speed of the wind and current rather than their directions. On the other hand, the result of multiple regression model analysis was able to predict that the direction was negative, and it was demonstrated that predicted values of leeway speed and direction using an experimental vessel is to be more influential by current than wind while the leeway speed through variance and covariance was positive. In terms of the leeway direction of the experimental vessel, the same result of the leeway speed appeared except for a possibility of the existence of multi-collinearity. Then, it can be interpreted that the explanatory variables were less descriptive in the predicted values of the leeway direction. As a result, the prediction of leeway speed and direction can be demonstrated as following equations. However, many drift tests using actual vessels and various drifting objects will provide reasonable estimations, so that they can help search and rescue fishing gears as well.

PURPOSES : This study prioritizes the potential technology for establishing an efficient traffic control in the ramp junction of urban deep underground tunnels in the future. We considered most of the applicable technologies that ensure traffic safety at the on-off ramp junction. METHODS : This study proposes a methodology to prioritize the applicable technology for establishing efficient traffic control in the ramp junction of an urban deep underground tunnel using an analytical hierarchy process (AHP). First, an AHP structure was developed. Second, an individual survey was conducted to collect the opinions of road and transportation experts. Based on the survey results, weights were estimated depending on the relevant criteria of the developed structure. The estimated weights were verified using the consistency index (CI) and consistency ratio (CR). In addition, a sensitivity analysis was performed to confirm the reliability of the estimated weights. Finally, the potential technology for an efficient traffic control in the ramp junction of an urban deep underground tunnel was prioritized. RESULTS : In the first level of hierarchy, traffic demand control had the highest priority, and ramp metering, section speed control, and shoulder lane control were selected in the second level of hierarchy. CONCLUSIONS : These results implied that prioritizing would be useful in establishing traffic operation strategies for traffic safety when constructing and opening deep underground tunnels in urban areas in the future.