AZ31 magnesium alloy was used to manufacture a thin plate using a melt drag method. The effects of roll speed, molten metal temperature, and molten metal height, which are the basic factors of the melt drag method, on the surface shape, the thickness of the thin plate, Vickers hardness, and microstructure of the thin plate were investigated. It was possible to manufacture AZ31 magnesium alloy thin plate at the roll speed range of 1 to 90 m/min. The thickness of the thin plate, manufactured while changing only the roll speed, was about 1.8 to 8.8 mm. The shape of the solidified roll surface was affected by two conditions, the roll speed and the molten metal height, and the Vickers hardness of the manufactured magnesium alloy thin plate value ranged from Hv38~Hv60. The microstructure of the thin plate produced by this process was an equiaxed crystal and showed a uniform grain size distribution. The grain size was greatly affected by the contact state between the molten metal and the solidification roll, and the amount of reactive solids and liquids scraped at the same time as the thin plate. The average grain size of the thin plate fabricated in the range of these experimental conditions changed to about 50-300 μm.

Ecological occupation in irrigation ponds is a well-acknowledged fact that is essential for biodiversity conservation in agricultural ecosystems. However, there are few studies on the ecological functions and relationship between a paddy field and irrigation using macroinvertebrates in an environmentally friendly paddy field. The objective of this study is to identify the community and distribution characteristics of macroinvertebrates in an agricultural paddy field and irrigation pond ecosystems, and to provide basic data on the ecological function of an environmentally friendly paddy field. Macroinvertebrate sampling was conducted from May to September in an agricultural paddy field and irrigation pond in an environment-friendly paddy field in Boryeong city. We conducted a study to identify the distribution characteristics using macroinvertebrate species analysis, such as Functional Feeding Groups (FFGs), Habitat Oriented Groups (HOGs), rarefaction curve, and a two-way dendrogram. A total of 37 species of macroinvertebrates in 28 families, 13 orders were collected study during the period of the investigation. Dominant taxa of macroinvertebrates included Coleoptera, Hemiptera, and Odonata. In terms of FFGs, predators and gathering collectors accounted for approximately 70%, in relation to HOGs, and climbers and swimmers occupied more than 50% from both the paddy field and irrigation pond. With respect to the rarefaction curve, the irrigation pond (July) was high as E (S, 141)=18 species, while the paddy field (May) was comparatively low as E (S, 141)=9 species. In conclusion, our results revealed that macroinvertebrates, such as Notonecta triguttata, Peltodytes intermedius, Appasus major, Laccotrephes japonensis, Appasus japonicus, Sigara substriata, Enochrus simulans, and Sternolophus rufipes, were used as a habitat and spawning ground in both paddy field and irrigation pond. The irrigation pond appears to be a very important spawning ground for macroinvertebrates.

We investigated physicochemical properties and isotopic compositions of organic matter (δ13CTOC and δ15NTN) in the old fish farming (OFF) site after the cessation of aquaculture farming. Based on this approach, our objective is to determine the organic matter origin and their relative contributions preserved at sediments of fish farming. Temporal and spatial distribution of particulate and sinking organic matter (OFF sites: 2.0 to 3.3 mg L-1 for particulate matter concentration, 18.8 to 246.6 g m-2 day-1 for sinking organic matter rate, control sites: 2.0 to 3.5 mg L-1 for particulate matter concentration, 25.5 to 129.4 g m-2 day-1 for sinking organic matter rate) between both sites showed significant difference along seasonal precipitations. In contrast to variations of δ13CTOC and δ15NTN values at water columns, these isotopic compositions (OFF sites: -21.5‰ to - 20.4‰ for δ13CTOC, 6.0‰ to 7.6‰ for δ15NTN, control sites: - 21.6‰ to - 21.0‰ for δ13CTOC, 6.6‰ to 8.0‰ for δ15NTN) investigated at sediments have distinctive isotopic patterns (p<0.05) for seawater-derived nitrogen sources, indicating the increased input of aquaculture-derived sources (e.g., fish fecal). With respect to past fish farming activities, representative sources (e.g., fish fecal and algae) between both sites showed significant difference (p<0.05), confirming predominant contribution (55.9±4.6%) of fish fecal within OFF sites. Thus, our results may determine specific controlling factor for sustainable use of fish farming sites by estimating the discriminative contributions of organic matter between both sites.

A field study was conducted to reduce airborne bacteria by supplying active ions to indoor spaces used by vulnerable human groups spending substantial amounts of time in places such as schools and hospitals. In an experiment conducted during school hours (8:00-15:00), the average number of airborne bacteria in classrooms was 345.53 CFU/m3 or more without active ions. However, ion supply reduced the airborne bacteria to an average of 113.23 CFU/m3, indicating an efficiency of 61.61%. As a result of tests in 33 rooms used for surgery in small and middle sized hospitals, ion supply for 2 to 4 hours reduced the average airborne bacteria concentration from 243.88 CFU/m3 to 104.34 CFU/m3, representing a 41.53% reduction. A laboratory test to confirm the ion activity has shown that the mortality rate of E. coli used as a test bacterium increased with exposure time to ions. The initial colony number of E. coli was 251 CFU, but decreased to 4 CFU after 60 minutes of exposure to active ions. Therefore, it was confirmed that the supply of active ions can contribute to the control of airborne bacteria in the indoor environment of schools, hospitals and other public facilities.

This experiment was conducted to investigate the change in the productivity of Italian ryegrass seeds according to the inter-row spacing in the southern region of the Korean Peninsula. Italian ryegrass (Lolium multiflorum Lam.) ‘Green Call’ variety was sown in Jinju, Gyeongnam in the fall of 2020 with three inter-row spacings (20, 30 and 40 cm). The experiment was arranged a randomized block design with three replications. The ryegrass was sown on October 17, 2020, and the harvest was on May 31, about 60 days from the first heading stage. There was no difference among treatments with an average of April 27th in heading stage. Plant height was significantly longer at 30 cm seeding interval and the shortest in 20 cm treatment. The length of the spike was the longest in the 40 cm seeding interval, and the number of seeds per spike was the highest in the 20cm seeding interval, but there was no significant difference among treatments. The seed yield was the highest at the 20 cm sowing interval (2,180 kg/ha), and decreased as the spacing increased. The dry matter content of seeds and straw was found to be 44.90% and 45.51% on average, and there was no significant difference among treatments. The amount of remaining straw after harvesting was found to be 7,506 kg/ha on average on DM basis, and was high at the 20 cm seeding interval. In view of the above results, it was found that it is most advantageous to sow at intervals of 20 cm when producing Italian ryegrass seeds through autumn sowing in the southern region.

The present study was conducted to examine the effect of soybean silage as a crude protein supplement for corn silage in the diet of Hanwoo steers. The first experiment was conducted to evaluate the effect of replacing corn silage with soybean silage at different levels on rumen fermentation characteristics in vitro. Commercially-purchased corn silage was replaced with 0, 4, 8, or 12% of soybean silage. Half gram of the substrate was added to 50 mL of buffer and rumen fluid from Hanwoo cows, and then incubated at 39°C for 0, 3, 6, 12, 24, and 48 h. At 24 h, the pH of the control (corn silage only) was lower (p<0.05) than that of soybeansupplemented silages, and the pH numerically increased along with increasing proportions of soybean silage. Other rumen parameters, including gas production, ammonia nitrogen, and total volatile fatty acids, were variable. However, they tended to increase with increasing proportions of soybean silage. In the second experiment, 60 Hanwoo steers were allocated to one of three dietary treatments, namely, CON (concentrate with Italian ryegrass), CS (concentrate with corn silage), CS4% (concentrate with corn silage and 4% of soybean silage). Animals were offered experimental diets for 110 days during the growing period and then finished with typified beef diets that were commercially available to evaluate the effect of soybean silage on animal performance and meat quality. With the soybean silage, the weight gain and feed efficiency of the animal were more significant than those of the other treatments during the growing period (p<0.05). However, the dietary treatments had little effect on meat quality except for meat color. In conclusion, corn silage mixed with soybean silage even at a lower level provided a greater ruminal environment and animal performances, particularly with increased carcass weight and feed efficiency during growing period.

Newborn piglets are routinely subjected to several treatments shortly after birth, one of which is tail-docking. Tail-docking, which is carried out without an anesthetic when the piglet is 3 to 4 days old, is intended to prevent the severe injuries that can occur when pigs bite each other’s tails. The study was performed in slaughterhouses to determine how much tail-docking prevented tail-biting and how much it caused clinical problems such as amputation neuroma. One thousand pigtails were collected from 3 slaughterhouses in different provinces and tail length and tail-biting injuries were examined. Among them, 659 tail tissues were examined for clinical problems like amputation neuroma. The collected tails were divided into 3 groups according to the length of the tail, which was defined as long (n=136, 75% of the tail remained compared to the referred intact tail length of 30.6±0.6 cm of crossbred Landrace×Yorkshire dam×Duroc sire; LYD), medium (n=694, 50% of the tail remained), and short (n=170, 25% of the tail remained). The results showed that 4.3% of 1000 tails had biting injuries and 58.7% of 659 tails had amputation neuromas. There was no significant association between the tail-biting injury and tail lengths (p=0.953). However, the tail-biting injuries differed significantly by the province (p<0.001), and the frequency of amputation neuromas also appeared more frequently in longer tail lengths (p<0.001). The results indicated that tail-biting behavior was not influenced by tail-docking but might be influenced by the housing system and/or management practices.

PURPOSES : The objective of this study is to develop regression models for surface distress (SD), rut depth (RD), and international roughness index (IRI) of Jeju Island local road by analyzing the correlations between the pavement performance and its influencing factors. METHODS : First, the differences between pavements in inland Korea and Jeju Island in terms of performance and influencing factors were investigated. Influencing factors were assigned to pavement sections on Jeju Island using the inverse distance weighting method, and the correlations between the pavement performance and influencing factors were analyzed. As a result, maximum temperature, heat wave days, annual temperature range, precipitation days, precipitation intensity, ESAL, etc. were determined as independent variables for the pavement performance prediction models. Multiple regression analysis was performed to develop the pavement performance models using the selected independent variables. RESULTS : The RD, maximum temperature, and precipitation days were determined to be the independent variables for the SD predictive model. The SD, maximum temperature, annual temperature range, heat wave days, and precipitation days were selected as independent variables of the RD prediction model. In addition, the RD, annual temperature range, heat wave days, precipitation days, and ESAL were selected as independent variables for the IRI prediction model. CONCLUSIONS : As a result of the study, an actual forecast model for SD, RD, and IRI was developed. Based on this model, it is possible to estimate the predictive value of the missing performance data in the studied interval. If the factors affecting performance are managed in terms of maintenance beyond a certain level, it can help those responsible for road maintenance to rationally select the maintenance method and timing.

This study investigated the seismic performance of reinforced concrete (RC) wall-slab frames with masonry infills. Four RC wall-slab frames with or without masonry infill were tested under cyclic loading. The RC frames were composed of in-plane and out-of-plane walls and top and bottom slabs. For masonry infill walls, cement bricks were stacked applying mortar paste only at the bed joints, and, at the top, a gap of 50 mm was intentionally left between the masonry wall and top RC slab. Both sides of the masonry walls were finished by applying ordinary or fiber-reinforced mortars. The tests showed that despite the gap on top of the masonry walls, the strength and stiffness of the infilled frames were significantly increased and were different depending on the direction of loading and the finishing mortars. During repeated loading, the masonry walls underwent horizontal and diagonal cracking and corner crushing/spalling, showing a rocking mode inside the RC wall-slab frame. Interestingly, this rocking mode delayed loss of strength, and as a result, the ductility of the infilled frames increased to the same level as the bare frame. The interaction of masonry infill and adjacent RC walls, depending on the direction of loading, was further investigated based on test observations.

Seismic demand on nonstructural components (NSCs) is highly dependent on the coupled behavior of a combined supporting structure- NSC system. Because of the inherent complexities of the problem, many of the affecting factors are inevitably neglected or simplified based on engineering judgments in current seismic design codes. However, a systematic analysis of the key affecting factors should establish reasonable seismic design provisions for NSCs. In this study, an idealized 2-DOF model simulating the coupled structure-NSC system was constructed to analyze the parameters that affect the response of NSCs comprehensively. The analyses were conducted to evaluate the effects of structure-NSC mass ratio, structure, and NSC nonlinearities on the peak component acceleration. Also, the appropriateness of component ductility factor (R p) given by current codes was discussed based on the required ductility capacity of NSCs. It was observed that the responses of NSCs on the coupled system were significantly affected by the mass ratio, resulting in lower accelerations than the floor spectrum-based response, which neglected the interaction effects. Also, the component amplification factor (a p) in current provisions tended to underestimate the dynamic amplification of NSCs with a mass ratio of less than 15%. The nonlinearity of NSCs decreased the component responses. In some cases, the code-specified R p caused nonlinear deformation far beyond the ductility capacity of NSCs, and a practically unacceptable level of ductility was required for short-period NSCs to achieve the assigned amount of response reduction.

Endoscopic ultrasonography-guided intervention has gradually become a standard treatment for peripancreatic fluid collections (PFCs). However, it is difficult to popularize the procedure in Korea because of restrictions on insurance claims regarding the use of endoscopic accessories, as well as the lack of standardized Korean clinical practice guidelines. The Korean Society of Gastrointestinal Endoscopy (appointed a Task Force to develope medical guidelines by referring to the manual for clinical practice guidelines development prepared by the National Evidence-Based Healthcare Collaborating Agency. Previous studies on PFCs were searched, and certain studies were selected with the help of experts. Then, a set of key questions was selected, and treatment guidelines were systematically reviewed. Answers to these questions and recommendations were selected via peer review. This guideline discusses endoscopic management of PFCs and makes recommendations on indication for the procedure, pre-procedural preparations, optimal approach for drainage, procedural considerations (e.g., types of stent, advantages and disadvantages of plastic and metal stents, and accessories), adverse events of endoscopic intervention, and procedural quality issues. This guideline was reviewed by external experts and suggests best practices recommended based on the evidence available at the time of preparation. This will be revised as necessary to address advances and changes in technology and evidence obtained in clinical practice and future studies.

국내 철근콘크리트 구조물은 겨울철 영하의 날씨로 매년 동결융해가 반복된다. 동결융해의 영향으로 철근콘크리트 구조물에 여러 가지 문제가 발생한다. 동결융해에 의해 손상이 된 철근콘크리트 구조물을 보강하기 위하여 다양한 보강공법 중 CFRRP(탄소섬유강화플라스틱)보강공법을 사용하였다. CFRP는 고강도, 고탄성 경량 소재로 시공성이 우수하며 인장강도, 탄성계 수가 뛰어나다. 본 연구에서는 동결융해 환경에 노출된 철근콘크리트 보(FTB), CFRP 플레이트로 보강한 철근콘크리트 보(FPB), CFRP 플레이트로 보강한 후 동결융해 환경에 노출된 철근콘크리트 보(FFP)의 휨 성능 실험을 하였다. 실험결과 FTB는 최대강 도 도달 이후 강도가 급격하게 감소하였다. FPB는 최대강도 도달하기 전에 강도와 강성이 증가하지만 CFRP 플레이트의 조기 파괴 후에는 효과가 없음을 보여준다. 또한 FFP는 FPB보다 최대강도가 낮았다. 이는 동결융해에 의한 콘크리트 표면과 CFRP 플레이트 사이의 계면전단응력의 감소로 판단된다.