With changing dietary trends, active research is underway to substitute rice flour for wheat flour, commonly added to various processed foods. This study aimed to explore whether Baromi2, a floury rice incorporated in the production of Sujebi, can effectively replace wheat flour at appropriate levels based on its physicochemical and cooking characteristics. Baromi2 was categorized based on particle size (100, 140, and 200 mesh) and added in proportions of 10% and 20% relative to the weight of wheat flour. As the amount of Baromi2 increased, the protein and lipid content of the mixed flour also increased. Simultaneously, the dough strength decreased as the noodles became thinner, reducing hardness, gumminess, and chewiness. Additionally, a decrease in particle size increased peak viscosity and breakdown viscosity, whereas setback viscosity decreased. When Baromi2 was added at a 10% ratio, it displayed a low cooking loss, demonstrating desirable characteristics for Sujebi and was considered the most suitable proportion for production. These results provide foundational data for developing various rice-processed products using Baromi2, contributing to expanding consumption and enhancing utility.

This study evaluated the physicochemical characteristics of wheat-flour mixed powders and cooking properties of Sujebi based on the addition of ‘Baromi2’ rice flours for increased expansion of rice consumption. The addition rates at which a roll surface sheet was formed were selected as 0, 10, 20, 30, and 50% based on preliminary experiments with 0-90% addition rates of ‘Baromi2’. Results of physicochemical characterization showed that increasing the addition ratio of ‘Baromi2’ rice flour resulted in increased crude ash and crude fat levels, however crude protein and total starch decreased. The L*-value (lightness) increased with increasing addition ratio of ‘Baromi2’ rice flour; in contrast, a*-value (redness), b*-value (yellowness), and particle size decreased. Results of RVA showed that increasing the addition ratio of ‘Baromi2’ rice flour increased the peak, breakdown, and setback. Regarding textural properties, hardness and chewiness values were significantly reduced with increasing addition ratios of ‘Baromi2’ rice flour. Based on these results, a blending ratio of 20% or less of ‘Baromi2’ is considered suitable for producing Sujebi, and this result serves as basic data for the development of processed rice flour products using ‘Baromi2’.

This study investigated the nutritional characteristics of before and after fermentation of domestic soybean (Glycine max L.) by Rhizopus oligosporus. The soybean storage proteins, β-conglycinin (11S globulin) and glycinin (7S globulin), were the most abundant in Seonyu (SY) and Danbaegkong (DBK), with concentrations of 253.4 mg/g and 193.0 mg/g, respectively. For 11S/7S related to sulfur-containing amino acid, DBK had a value of 0.95, making it the most excellent nutritionally among all the cultivars. The free amino acid content significantly increased from 0.04~10.45 mg/g before fermentation to 1.37~16.95 mg/g after fermentation, and the essential amino acid composition increased, confirming an improvement in protein quality after fermentation. Phytic acid, known as a nutritional inhibitor of soybeans, decreased from 1.66~2.13 g/100 g before fermentation to 0.90~1.58 g/100 g after fermentation, suggesting that mineral absorption inhibition was alleviated. In addition, the trypsin inhibitor content is suppressed by 76.20% to 81.25% after fermentation, which is expected to improve protein utilization in the body. This study confirmed some properties of fermented products by Rhizopus oligosporus using domestic soybeans, and these results are presented to serve as the basic data for establishing new uses of Korean soybean cultivars.

This study was conducted to compare the quality characteristics of commercial tofu products from the market in Korea. Seventeen types of commercial tofu samples were taken and their physicochemical properties, including soluble solid contents, salinity, pH, total acidity and moisture (total solid contents), were analyzed. The hardness of tofu was negatively correlated with the moisture contents of tofu (r=－0.667**). The commercial tofu showed pH 5.80~6.24, total acidity of 0.016~0.034%, soluble solids of 1.50~3.45 °Brix, salinity of 1.20~2.30%, and moisture content of 79.91~87.57%, respectively. All 17 tofu samples sold in the Korean market were prepared using crude MgCl2 and sea water as a coagulant. The quality characteristics vary depending on the constituent’s of soybeans, and the ratio and amount of coagulants of tofu used. The origin of soybean seeds affected the yellowness of tofu; tofu made from imported soybean showed a higher b value than domestic soybean. These results are expected to be useful for understanding trends in the domestic tofu industry.

In vitro digestibility and protein digestibility corrected amino acid scores (PDCAAS) were investigated to verify the availability of protein in various Rhizopus oligosporus fermented products of domestic soybean (Glycine max L.) cultivars. Danbaegkong (DBK), Daepung (DP), Daewonkong (DWK), Saedanbaek (SDB), Seonyu (SY), and Cheongja4ho (CJ4) were used as raw samples, which were fermented using commercially available Rhizopus oligosporus for 48 h. All cultivars showed increased crude protein content after fermentation. The crude protein content of DBK and SDB was significantly higher than that of the other samples (55.12% in DBK and 54.22% in SDB) (p<0.001). CJ4 had the highest alanine content of 28.88 mg/g (p<0.001), and no significant difference in cysteine content was detected among the cultivars. In most of the fermented samples, the in vitro digestibility was 0.9 or higher, indicating high protein in the fermented samples. However, it is considered that restrictions on digestion are low. In DWK, the amino acid content and PDCAAS, which together indicate protein quality, were 0.917 and 0.855, respectively, confirming that it was the best cultivar to provide the raw material for fermentation. In conclusion Rhizopus oligosporus fermented soybean products can be considered a prospective source of protein with high utility value.

Consumer demand for imported and craft beer is increasing. Almost all the malt used by craft beer companies is imported. This study sought to develop a malting technology to expand the use of domestic barley, the main raw material for beer, and to examine its influence on the quality of domestic malt. The Hopum cultivar of beer barley was purchased and used at the Jeollanam-do Seed Management Center. A pilot-scale malting facility built by the National Institute of Crop Science was used. One sack (40 kg) of barley was sieved through screening sieves, and the barley was classified according to size (3.1, 2.8, 2.5, 2.2, and 2.2 mm), with the size-related composition being 18.1, 48.9, 23.3, 6.4, and 1.0%, respectively. The malt yields were 89.0, 87.6, 86.6, 82.2, and 76.1%, respectively. The coleoptiles elongation decreased as the barley size decreased. The protein content of malt tended to be high at small particle sizes of 2.2 mm. The soluble solid content of wort prepared from malt revealed good values of 17.4-17.5oBx, except for 15.3oBx for particles <2.2 mm in size. According to barley size in the malting process, these findings should be valuable quality indicators of malt.

The purpose of this study was to investigate the Maillard reaction–related physicochemical properties of three maize varieties (Kwangpyeongok, Sinhwangok2ho and Gangdaok) after roasting them for different times (0, 15, 25, 40, and 55 minutes). The Maillard reaction is a non-enzymatic browning reaction involving reducing sugars and amino compounds. The content of reducing sugar, the causative agent of the Maillard reaction, decreased as roasting time increased. Gangdaok showed the lowest reducing sugar content of 1.04 mg/g after 55 minutes of roasting. In the elapsed roasting time, chromaticity ‘L’ and ‘b’ values decreased. At 55 minutes of roasting, wherein the Maillard reaction occurred most actively, Gangdaok showed the lowest ‘L’ value of 56.37 and the highest ‘a’ value of 7.60. Gangdaok had superior conditions for inducing the Maillard reaction compared to other varieties, and it is consider that 'flint–type', an endosperm characteristic, may have been the influencing agent. This study detected a total of 52 types of volatile aroma compounds (VACs), of which 28 were produced after roasting. Of the total VACs detected, 2-Formyl-5-methylfuran and 2-Furancarboxaldehyde accounted for 43.8~45.5% and have been confirmed to be the major VACs present in roasted maize. Most of the correlations between the Maillard reaction–related characteristics showed high correlation coefficients.

The effect of 16 cultivars on the quality of the rice porridge was investigated. The ‘Geunnun’ had the highest water absorption rate, but the ‘Segyejinmi’ yield (w/w) was the highest. The total sugar content of the rice porridge was 0.29~8.10%, showing significant variation among the cultivars. High amylose ‘Dodamssal’ and ‘Hwaseonchalbyeo’ glutinous rice displayed rotational viscosities of <20,000 cP. Rotational viscosities for boiled rice cultivars were 30,000~40,000 cP, representing an intermediate level, and the rotational viscosities of ‘Geonyang2’ and ‘Hanareum4’ were over 50,000 cP. These results suggest that the viscosity of rice porridge varies significantly among raw material cultivars. Among other variables affecting the texture profile of rice porridge, there were significant differences in hardness and gumminess among the cultivars. As a raw material, ‘Baekokchal’, a kind of glutinous rice, is known to be whiter than the non-glutinous rice, but after processing to porridge, it showed the lowest L value (71.1). Starch degrading enzyme activity was not significant in most types of rice porridges within 30 or 60 minutes. Therefore, enzymatic starch degradation is thought to be completed within 30 minutes. Among the tested raw materials, ‘Miho’ was 73.5 μg/mg, indicating the best digestibility in vitro.

This study was conducted to compare the quality characteristics of firm tofu (coagulant calcium chloride, CaCl2 used) made from eight imported and four domestic soybeans selling in Korean markets. The 100-seed weight of soybeans imported from China and Seonpung cultivated in Korea was the highest at 33.23 g and 32.51 g, respectively. Soybeans imported from the USA (bulk type) showed the lowest at 16.12 g, followed by Ukraine at 16.94 g, and Brazil at 18.51 g. The range of protein and fat in the 12 soybeans was 37.08~41.36% and 18.35~22.17%, respectively. The isoflavone contents were the highest in Daepung2 cultivated in Korea at 3,764.10 μg/g and the lowest in soybeans imported from Brazil at 1,439.85 μg/g. Tofu yield among the samples was in the following order: Seonpung (235.2%), China (232.0%) Daepung2 (228.7%), Daechan (225.7%), and Brazil (208%). Tofu made with soybeans cultivated in Korea (including from China) showed a higher yield compared to that made from soybeans from seven other countries. In the analysis of the correlation of quality factors of tofu, the hardness of the tofu was correlated with 100-seed weight (r=0.676*) and protein content of the soybeans (r=0.837**). Tofu yield was correlated with 100-seed weight (r=0.748**) and protein content of the soybeans (r=0.583*).

This study analyzed the nutritional composition properties of soybeans and the antioxidants, isoflavones, organic acids, and volatile flavor compounds of fermented black soybean products (FBSP). After 24 hours of fermentation, the range of water uptake ratio was 129.00-131.30%, respectively. Total polyphenols content and DPPH and ABTS radical scavenging activity were higher in Cheongja-3 FBSP, flavonoids in Socheongja, while DPPH and ABTS radical scavenging activities were similar in Cheongja-3 FBSP. Isoflavone contents of aglycones (daidzein, genistein, and glycitein) in Cheongja-4 FBSP increased up to 41.97 μg/g. The rank order of primary organic acids was citric acid > fumaric acid > acetic acid > lactic acid, with Cheongja-3 FBSP being the highest. This study identified a total of 34 volatile aroma-compounds, including seven alcohols, seven acids, seven ketones, five phenols, two esters, one furan, four pyrazines, and one miscellaneous. The result could be applied to determine the suitability of cultivars and the quality of the process used for fermented soybean products.

This study was conducted to secure basic information for corn processing by comparing the quality characteristics according to maize cultivars and kernel types (dent, intermediate, flint-like). As a result of analyzing 15 cultivars, a range of measurements were observed: 100-kernel weight, 22.89~35.63 g; moisture, 7.57~8.42%; crude protein, 8.46~11.45%; crude lipids, 3.26~4.83%; Hunter’s L-value, 83.70~86.79; a-value, 2.61~5.49; b-value, 22.01~28.15; and total carotenoids, 6.74~17.07 μg/g. Significance among the cultivars was shown in all quality characteristics (p<0.001), but the significance among the kernel types was found only in crude protein (p<0.005), crude fat (p<0.001), and Hunter’s L-value (p<0.05). The hardness of maize was decreased proportionally to the soaking time for all maize cultivars (p<0.001). In particular, with the same soaking time for different kernel types, the hardness difference was shown in the order of flint-like > dent ≒ intermediate. It was confirmed that the decrease in the hardness of flint-like kernel of close to that of hard-type starch was slowed compare dent and intermediate kernels. So it is expected the some characteristic of kernel types will contribute to the appropriate customized use of the developed cultivars.

The purpose of this study was to compare the quality characteristics of silken tofu products from the commercial market in Korea. Seven types of commercial silken tofu were sampled and their physicochemical properties, including soluble solid contents, salinity, pH, total acidity, moisture contents (total solid contents), crude protein and fat contents were evaluated. The TPA results suggest that the texture of silken tofu was very different from one another according to the type of and the amount of coagulant. The commercial silken tofu showed a range of pH 5.53~6.48, total acidity of 0.12~0.32%, soluble solid contents of 2.62~5.07 °Brix, salinity of 2.28~4.30%, and moisture contents of 87.10~92.24%, respectively. In terms of the coagulant of tofu, besides the GDL (glucono-δ- lactone), other coagulants such as MgCl2 for making ‘silken tofu’ in the Korean tofu market. The quality characteristics differed depending on the constituents of sample and the coagulants of tofu used. These results are expected to be useful in identifying new trends in the domestic silken tofu industry.