This study analyzed the nutritional composition properties of soybeans and the antioxidants, isoflavones, organic acids, and volatile flavor compounds of fermented black soybean products (FBSP). After 24 hours of fermentation, the range of water uptake ratio was 129.00-131.30%, respectively. Total polyphenols content and DPPH and ABTS radical scavenging activity were higher in Cheongja-3 FBSP, flavonoids in Socheongja, while DPPH and ABTS radical scavenging activities were similar in Cheongja-3 FBSP. Isoflavone contents of aglycones (daidzein, genistein, and glycitein) in Cheongja-4 FBSP increased up to 41.97 μg/g. The rank order of primary organic acids was citric acid > fumaric acid > acetic acid > lactic acid, with Cheongja-3 FBSP being the highest. This study identified a total of 34 volatile aroma-compounds, including seven alcohols, seven acids, seven ketones, five phenols, two esters, one furan, four pyrazines, and one miscellaneous. The result could be applied to determine the suitability of cultivars and the quality of the process used for fermented soybean products.

This study was conducted to secure basic information for corn processing by comparing the quality characteristics according to maize cultivars and kernel types (dent, intermediate, flint-like). As a result of analyzing 15 cultivars, a range of measurements were observed: 100-kernel weight, 22.89~35.63 g; moisture, 7.57~8.42%; crude protein, 8.46~11.45%; crude lipids, 3.26~4.83%; Hunter’s L-value, 83.70~86.79; a-value, 2.61~5.49; b-value, 22.01~28.15; and total carotenoids, 6.74~17.07 μg/g. Significance among the cultivars was shown in all quality characteristics (p<0.001), but the significance among the kernel types was found only in crude protein (p<0.005), crude fat (p<0.001), and Hunter’s L-value (p<0.05). The hardness of maize was decreased proportionally to the soaking time for all maize cultivars (p<0.001). In particular, with the same soaking time for different kernel types, the hardness difference was shown in the order of flint-like > dent ≒ intermediate. It was confirmed that the decrease in the hardness of flint-like kernel of close to that of hard-type starch was slowed compare dent and intermediate kernels. So it is expected the some characteristic of kernel types will contribute to the appropriate customized use of the developed cultivars.

The purpose of this study was to evaluate the quality properties of Meju prepared by inoculating two strains of Bacillus amyloliquefaciens HJ5-2, and Aspergillus oryzae PS03. The three soybean varieties that include Daewonkong, Daechan, and Saedanbaek were used in this experiment. The fermentation temperature during the Meju aging varied at 20℃, 30℃, and 40℃, respectively. The physicochemical analysis of the soybeans, showed that the cured protein and fat contents were 34.83~43.49% and 12.91~18.90%, respectively. The pH and total acidity were 6.47~6.93 and 0.11~1.22%, respectively. The change in appearance of the Meju was that the yellow-green mold was well formed on seven days at fermentation temperature of 20℃ and 30℃, but at 40℃, there was minimal mold formation and cracking of the surface. The amino nitrogen content was highest on the Daechan Meju at 621.83 mg% for seven days. The amylase increased as the fermentation period increased in all samples, and the protease increased rapidly until the first day of the fermentation, and then gradually increased thereafter. The total number of bacteria increased or decreased as the fermentation proceeded to 6.66~10.07 log CFU/g. The mold counts increased with increasing fermentation period in the range of 6.38~8.79 log CFU/g.

The purpose of this study was to evaluate the appearance, physicochemical, physical, and fermentation properties of the fermented soybean produced by manufacturing with inoculation the different types of microbial strains. The strains were inoculated by the NSI (natural strains inoculation), and the SSI (selective strain inoculation) were treatments. The appearance showed differences in color, viscous substance, and hardness depending on strains inoculation and fermentation duration. The pH, and total acidity were 6.40~7.26%, and 0.10~0.39% respectively with differences depending on the samples. The moisture content as the fermentation duration increased, the NSI (56.03~57.66%) decreased and the SSI (56.71~58.63%) increased. The physical characteristics of the hardness increased as the fermentation duration increased for the NSI and the SSI decreased. The color values for the L, a, and b values were 47.64~58.56, 7.15~9.08, and 12.41~17.30, respectively. The α-amylase and protease activities of the SSI were the highest among all treatments. The total viable cell counts of the fermented soybean products by strains were 5.02 to 9.77 log CFU/g, and SSI (fermentation, 48 hours) was the highest. The amino-type nitrogen contents of all samples were 301.62~746.97 mg% and the SSI showed the highest content. The amino acid had the highest glutamic acid content.

In this study, the properties of the substances fermented soybean producted by manufacturing with several Aspergillus strains were investigated. The five soybean cultivar that includes miso, jinpung, pyeongwon, cheonga and chamol were used in this experiment. The pH and total acidity were 6.30~6.66%, and 0.27~0.48%, respectively with differences depending on the samples. The color values for L value, a, and b value were 60.28~69.80, 0.64~3.68, and 11.48~31.21, respectively. The amylase activities, protease activities, and amino-type nitrogen of the jinpung samples were the highest among all cultivars. The mold counts the fermented soybean products by cultivars were 6.18~9.14 log CFU/g, and miso was the highest. Free amino acid and organic acid contents were highest in the jinpung and showed different composition depending on each sample. A total of 18 volatile aroma-compounds, including two acids, four alcohols, four ketones, three phenols, one furan, three pyrazines, and one miscellaneous compounds. In conclusion, it is expected that manufacturing A. oligze inoculation fermented soybean products using jinpung cultivar will improve quality.

우리나라에서 쌀(Rice, Orzya sativa L.)은 주식일 뿐만 아니라 다양한 가공식품원료로서 그의 가치가 높은 식품자원이다. 본 연구는 쌀맥주 제조 시 당화가 잘되는 쌀의 전 처리 방법에 대해 탐색하고자 수행되었다. 쌀을 미세분쇄, 수침처리, 볶음처리, 호화처리, 팽화처리 후 맥아와 함께 당화를 한 결과, 팽화미를 함유한 맥즙이 가장 높은 당도 (°Bx)를 나타내었다. 또한 액화 및 당화효소를 첨가하지 않고, 맥즙을 제조 시 쌀 30% 첨가했을 때 당도가 가장 높은 결과를 나타내었다. 볶은쌀과 팽화미를 이용하여 10, 20, 30% 첨가한 맥주를 제조한 결과 팽화미를 30% 첨가 한 맥즙의 가용성고형분이 15.4 °Bx로 가장 높고 당화도 잘되었으며, 맥주의 알코올함량이 5.0-5.4%로 볶은쌀 첨가 맥주에 비해 높았으며, 탁도가 없었고 쓴맛도 적은 결과를 보였다. 팽화처리는 쌀의 당화를 개선 할 수 있는 좋은 가공방법이라고 생각되며, 팽화미를 첨가한 쌀맥주 제조방법은 편리하고, 좋은 품질의 맥주를 생산 할 수 있는 방법 중의 하나라고 기대된다.

This study evaluates the quality properties of soybean cultivar for fermented soybean products with several Aspergillus spp., which were selected based on their high antimicrobial activities. The six soybean varieties Daewonkong, Taekwangkong, Jinpung, Daechan, Daepung-2, and Seonpung were used in the experiment. Physicochemical analysis of soybeans showed that the cured fat and protein contents were 18.28-19.15 and 36.49-38.72%, respectively. The pH and total acidity (TA) were 6.31-6.60 and 0.36-0.48%, respectively. The amino nitrogen contents of all samples were in the range of 641.23 to 791.12 mg%, while Daechan showed the highest content (791.12 mg%). Mold counts of fermented soybean products were 7.63-9.20 log CFU/g. Hunter color values for L value, a value, and b value ranged from 59.52-71.28, 0.11-3.03, and 14.61-31.70, respectively. The amylase and protease activities of the Daepung-2 and Daechan were the highest among all the cultivars. The rank order of major free amino acids was glutamic acid > lysine > alanine > aspartic acid, with Daepung-2 and Daechan being the highest. As a result, Daepung-2 was suitable as a soybean cultivar, exhibiting high quality standards for the fermentation process of the fermented soybean products.

In this study, we analyzed the nutritional composition properties of soybeans and the organic acids, amino acids and volatile flavor compounds of fermented soybean products. We used five soybean cultivars including Pyeongwon, Jinpung, Saedanbaek, Saeolkong and Cheonga for this experiment. Physicochemical analysis of soybeans, showed that the cured protein and fat contents were 35.12∼45.12 and 14.26∼20.14%, respectively. The rank order of major organic acids was lactic acid > acetic acid > fumaric acid, with Saedanbaek being the highest. Total amino acid content of the samples was 358.12∼657.28 mg/100 g, and glutamic acid, alanine, cysteine, valine, leucine, histidine and arginine were the major amino acids. We identified a total of 34 volatile aroma-compounds, including 7 alcohols, 7 acids, 7 ketones, 5 phenols, 2 esters, 1 furan, 4 pyrazines, and 1 miscellaneous compounds. As a result of this, could be applied to determine the suitability of cultivars and the quality for the process of the fermented soybean products.

Sikhye is a traditional rice beverage, produced from steamed rice, barley or wheat malt and water. Nine varieties of barley and seven varieties of wheat cultivars were investigated and compared quality characteristics, diastatic power, and activities of α- and β-Amylase. For barley malt, the crude lipid and protein content of malt 1.74~2.42% and 10.71~14.36%, respectively. Also, the crude lipid and protein content for wheat malt 1.57~1.71% and 10.07~13.59%, respectively. The ‘Dahyang’ barley showed the highest diastatic power with 117.61 °L, while for wheat, ‘Baegjoong’ produced the highest diastatic power with 85.25 °L. The enzymatic activities, α- and β-Amylase for barley cultivar was 110.17~214.70 μnit/g and 869.73~1,638.43 μnit/g, respectively. Likewise, α- and β-Amylase for wheat cultivar was 73.19~132.23 μnit/g and 726.70~ 889.30 μnit/g, respectively. The highest sugar content of Sikhye from barley was 11.10 °Bx (‘Hyeda’), while from wheat, was 10.20 °Bx (‘Baegjoong’). Among the four free sugar components analyzed from Sikhye, maltose was the highest in all cultivars. The highest maltose content was produced in ‘Dahyang’ Sikhye at 6.91%. There was significant positivecorrelation among the diastatic power and enzymatic activities of malt and free sugar components in Sikhye.

This study evaluates the quality properties of soy-paste soybean cultivar for fermented soybean products. The six soybean varieties that include Jinpung, Saedanbaek, Daepung 2, Pyeongwon, Cheonga and Saeolkong were used in the experiment. The range of water uptake ratio, hardness after soaking and hardness after steaming were 117.00~131.33%, 1.65~3.30 kg and 0.05~0.14 kg, respectively. The physicochemical analysis indicated the following: Moisture content, 63.27~68.72%; pH, 6.43~6.60; total acidity, 0.27~0.45%. Color values for L value (lightness), a value (redness), and b value (yellowness) ranged from 39.07~67.92, 7.64~11.79, and 7.48~20.67, respectively. The amylase and protease activities of the Saedanbaek samples were the highest among all cultivars. The amount of viscous substance in the fermented soybean products by cultivars ranged from 5.93 to 8.37%, and Saedanbaek was the highest. The total viable cells counts for soybean fermented products were 9.11~9.42 log CFU/g. The amino-type nitrogen contents of all samples were in the range of 401.07 to 524.47 mg% and Saedanbaek cultivars showed the highest content (524.47 mg%). Based on the results, Saedanbaek will be suitable as a soy-paste soybean cultivar and the quality standards for the fermentation process of the fermented soybean products.

본 연구에서는 우리나라의 전통메주의 품질관리 및 표준화를 위한 기초자료로 제시하고자 전국적으로 수집한 전통메주 18종(TM1~TM18)의 이화학적 및 미생물 분포의 특성을 조사하였다. 메주의 외관은 시료에 따라 색, 곰팡이 생성 양상 등이 다르게 나타났으며, 형태는 사각형으로 무게는 약 0.84~2.04 kg 정도로 나타났다. 이화학적 특성으로 pH, 적정산도, 수분함량 및 조단백질 함량을 측정한 결과, pH는 5.31~ 8.21, 적정산도는 0.91~2.74% 수준으로 시료 간의 차이를 보였다. 수분함량은 4.79~42.16%로 시료에 따라 약 8.8배, 조단백질 함량은 41.37~23.48% 수준으로 1.7배의 차이를 나타내었다. 색도를 측정한 결과, L값의 경우 39.07~67.92, b값 및 a값은 각각 3.57~8.87, 7.48~20.67 수준으로 조사되었다. 메주의 발효정도를 알 수 있는 아미노태 질소 함량은 시료에 따라 257.29~839.58 mg%로 유의적으로 큰 차이를 보였고(p<0.05), TM13이 839.58 mg%로 가장 높았으며, TM3가 257.29 mg%로 가장 낮은 함량을 나타내었다. 미생물의 분포 특성으로 총균수, 효모 및 곰팡이수를 측정한 결과, 총균수는 8.43~ 5.91 log cfu/g 수준이었고, 효모는 2.48~5.19 log cfu/g, 곰팡이수는 3.42~7.48 log cfu/g 수준으로 시료에 따라 미생물의 분포가 다양하게 나타났다. 이와 같은 결과로 부터 메주를 생산하는 지역 및 산업체의 메주 제조방법, 메주의 발효기간 및 온도 등의 발효조건, 사용되는 원료 콩의 품종 등에 대한 품질기준 및 관리가 마련되어야 할 것이다.

This study was conducted to investigate the quality of pumpkin paste added with different starches during storage at 4℃ for 8 days. Pumpkin paste was evaluated for pH, carotenoid, syneresis, color values, texture, and sensory characteristics. The properties of the pumpkin paste were studied on three different starches (CON: control, MCP: cow pea starch, MMB: mung bean starch, and MSP: sweet potato starch). The initial pH of the pumpkin paste with starches were 6.13~6.16. The pH of pumpkin paste increased as the starches added increased. The carotenoid content of CON was higher in the pumpkin paste processing. The change of syneresis significantly increased with the storage period, and the amount of change of MCP and MMB added with starch was smaller than CON without the added starch. The Hunter's L-values of the pumpkin paste increased, whereas the a- and b-value decreased as the amount of starches added increased. The results of the textural analysis showed that the hardness of MCP and MMB was different from that of other pumpkin paste, showing a lower value such as 38.26 g, 38.93 g, while CON and MSP was 40.43 g and 42.49 g, respectively. A sensory evaluation indicated that starches could enhance the overall texture characteristics of pumpkin paste. In terms of the overall acceptance of the pumpkin paste, the experimental group with MCP scored the best.

The properties of rice were studied on five rice cultivars (Ilpumbyeo, Samkwang, Goami-4, Dodamssal, and Thai rice), and employed two kinds of saccharification treatment methods (treatment : rice shape, treatment II: grinding rice shape). Thai rice showed differences in width and length when compared to other cultivars of rice, and the Goami 4 had the lowest thousand-grain weight. The Goami4 and Dodamssal each showed high contents of amylose and resistant starch, and the water absorption rate was close to maximum at 90 minutes as well as the highest level of Goami 4 at all times. The qualities of highest water-binding capacity, solubility and swelling power was most significant in Thai rice. The lowest hardness level of wet rice resulted in the lowest hydration-related characteristics. High amylose content rice, in particular, showed low sugar content and slightly increased sugar content as the saccharification process improved (treatment II). On the other hand, high amylose cultivars had the same high degree of hardness as boiled rice. From these results, the Dodamssal was found to have the lowest viscosity at all temperatures but highest viscosity during the saccharification process, suggesting it may be successfully implemented as a thickener in rice beverage processing. The purpose of this study was to attempt to provide basic data on the development of rice beverage manufacturing technology, based upon the quality characteristics related to beverage processing of rice cultivars.

This study investigated the effects of Goami 2 on the properties of Garaetteok. The moisture, crude protein, crude lipid and crude ash contents of the rice were 16.02, 5.40, 1.87 and 0.77%, respectively. The amylose contents (32.16%) and total dietary fiber contents (9.03%) were the highest in Goami 2. The water binding capacity of Goami 2 (167.84%) was higher than general rice flour. Using a rapid visco analyzer (RVA), the initial pasting temperature of Goami 2 was found to be the highest; also, the peak viscosities of Goami 2 were higher than general rice powder. To assess the effect of Goami 2 on the quality characteristics of Garaetteok, the rice-cake was made by adding various amounts of Goami 2 (0, 10, 20, 30, and 40% w/w) to rice. It was observed that higher the amount of added Goami 2, lower were the grades. In terms of the color values of Goami 2 addition, the L-values of Garaetteok were lower with increasing amount of Goami 2; addition of 40% Goami 2 had the lowest value. The textural properties (hardness) also showed that tteok containing the greater amounts of Goami 2 were considerably harder compared with the control. Sensory preference tests revealed that addition of less Goami 2 had the highest scores for appearance, color and overall acceptability, and the Goami 2 added was lower than control. Therefore, as compared to others cultivars, rice flour proved the most acceptable for the preparation of Garaetteok with cultivar rice.

The properties of rice were studied, and 8 rice flour cultivars were used to study the effect of particle size on the physicochemical properties, color value, RVA viscosities, water absorption index (WAI), and water solubility index (WSI) of rice flours. The mean particle size by the 3 particle size classification of 150 mesh, 200 mesh, and 250 mesh was, 90.75 μm, 60.73 μm, 39.94 μm, respectively. Thai rice had the highest amylose content and Samkwang rice had the lowest amylose content. Protein content of rice flours prepared was decreased as the particle size of rice flour decreased. In terms of color values, the L-value and the a-value of rice flour were increased as the particle size of rice flours decreased, while the b-value was decreased as the particle size of rice flours decreased. Using a rapid visco analyzer (RVA), the initial pasting temperature of Thai rice cultivar was found to be the highest; the peak viscosities of Sunpum cultivar and Misomi cultivar, and Samkwang rice were higher than those of other rice flours. The water absorption index and water solubility index were increased as the particle size of rice flour decreased. In order to use processed rice flour for the development of processed foods, proper characteristics of the cultivars and particle size should be considered.