중수는 경수와 다른 물리화학적 특징으로 다양한 생물화학적 변화를 유도할 수 있다. 기존 분리공정의 단점인 에 너지소비량을 줄이고자 전기방사 폴리아마이드 분리막을 이용하여 정삼투공정을 이용하였다. 유도용액으로 NaCl과 인산을 사용하였다. 중수농도를 정량화하기 위해 FT-IR 분광법을 활용하였다. 인산과 수소/중수소의 특별한 상호작용력을 분광학적 으로 확인하였으며, 정삼투공정으로 농축이 가능할 수 있다는 것을 관찰하였다.

화석연료 사용이 증가하면서 온실가스 및 대기오염가스 등의 환경오염 문제가 심각해졌다. 이를 해결하기 위한 신재생에너지, 친환경적인 대체에너지원을 찾기 위한 많은 연구가 이뤄지고 있다. 연료전지는 전기에너지를 발생하며 부산물로 물만이 생성되는 친환경 에너지 발생장치다. 특히, 전해질로 음이온 교환막을 사용하는 음이온 교환막 연료전지(Anion Exchange Membrane Fuel Cell)는 높은 촉매의 활성으로 양이온 교환막 연료전지(Proton Exchange Membrane Fuel cell)와 다르게 저가의 금속 촉매를 사용할 수 있는 장점 때문에 관심이 높아지고 있다. 음이온 교환막으로써 요구되는 주요 특성은 높은 이온(OH-) 전도도 및 높은 pH의 구동조건에서의 안정성이다. 본 연구에서는 PPO계 고분자의 화학적 가교 반응을 이용해 얻어진 가교형 고분자 막의 낮은 기계적인 특성과 치수 안정성을 높이기 위해 보다 높은 분자량을 갖는 고분자 사용과 함께 가교율 증대를 통해 보다 높은 이온 전도도와 기계적인 성질, 높은 화학적인 안정성뿐만 아니라 실제 연료전지 구동조건에서 높은 셀 성능을 갖는 AEMFC용 고분자 전해질 막을 개발했다.

다공성 분리막은 입자성 물질을 제거하는데 산업적으로 다양하게 응용되고 있다. 기존 다공성 분리막 제작 방법 과 다르게, 용액퍼짐 상분리법은 매우 간단하게 기공을 형성할 수 있다. 먼저 지지층으로 메쉬 위에 물을 적신 후, 물과 혼합 되지 않은 용매에 폴리설폰 용액을 흘려준다. 이때 물과 혼합되지 않은 용매는 쉽게 기화되어 폴리설폰은 얇은 막으로 만들어지게 된다. 기공을 형성하기 위해 폴리설폰 용액에 물과 혼합할 수 있는 물질을 넣게 되면, 넣어주는 농도 비율에 따라 기공크기를 조절할 수 있게 된다. 막의 두께는 쉽게 용액의 농도로 조절이 된다. 다공성 분리막은 메쉬의 형성을 그대로 유지하고 있어 3차원 구조체를 형성하는데 매우 유용하다. 본 연구에서 제시된 용액 퍼짐 상분리법은 매우 낮은 생산단가와 쉬운 공정조절에 의해 기존 분리막에 비해 높은 가격경쟁력을 가질 수 있는 특징을 보이고 있다.

This study was conducted to investigate whether dietary levels of copra and palm meals affect the growth performance, carcass characteristics, and meat properties of Hanwoo steers. Eighty-one Hanwoo steers were randomly assigned to one of three dietary groups: T1 (conventional level of palm and copra meals), T2 (20% copra meal and 15% palm meal), and T3 (30% copra meal and 20% palm meal). During the growing and early fattening periods, the average daily gains and formula feed intakes of T2 and T3 were higher than that of T1; however, those differences were not statistically significant. The dietary levels of copra and palm meals did not affect carcass weight, back fat thickness, and rib-eye areas. Marbling scores and meat quality grades were lower in T3 than in T1 and T2; however, those differences were not statistically significant. Meat color, fat color, texture, and maturity were similar among the treatment groups. In addition, dietary levels of copra and palm meals did not affect the chemical and fatty acid composition of longissimus dorsi muscles in Hanwoo steers. Thus, the present results indicate that high supplementation levels of copra and palm meals do not negatively affect the growth performance, carcass characteristics, and meat properties of Hanwoo steers.

This study investigated phosphorus removal from secondary treated effluent using coagulation-membrane separation hybrid treatment to satisfy strict regulation in wastewater treatment. The membrane separation process was used to remove suspended phosphorus particles after coagulation/settlement. Membrane separation with 0.2 μm pore size of micro filtration membrane could reduce phosphorus concentration to 0.02 mg P/L after coagulation with 1 mg Al/L dose of polyaluminum chloride (PACl). Regardless of coagulant, the residual concentration of phosphorus decreased as the dose increased from 1.5 to 3.5 mg Al/L, while the target concentration of 0.05 mg P/L or less was achieved at 2.5 mg Al/L for the aluminum sulfate (Alum) and 3.5 mg Al/L for PACl. Moreover, alum showed better membrane flux as make bigger particles than PACl. Alum showed a 40% of flux decrease at 2.5 mg Al/L dose, while PACl indicated a 50% decrease of membrane flux even with a higher dose of 3.5 mg Al/L. Thus, alum was more effective coagulant than PACl considering phosphorus removal and membrane flux as well as its dose. Consequently, the coagulation-membrane separation hybrid treatment could be mitigate regulation on phosphorus removal as unsettleable phosphorus particles were effectively removed by membrane after coagulation.

The use of continuous welded rail is increasing because of its many advantages, including vibration reduction, enhanced driving stability, and maintenance cost savings. In this work, two different types of continuous welded rails were examined to determine the influence of repeated wheel-rail contact on the crystal structure, microstructure and mechanical properties of the rails. The crystal structure was determined by x-ray diffraction, and the microstructure was examined using optical microscopy and scanning electron microscopy. Tensile and microhardness tests were conducted to examine the mechanical behaviors of prepared specimens taken from different positions in the cross section of both newly manufactured rail and worn rail. Analysis revealed that both the new and worn rail had a mixed microstructure consisting of ferrite and pearlite. The specimens from the top position of each rail exhibited decreased lamella spacing of the pearlite and increased yield strength, ultimate tensile strength and hardness, as compared with those from other positions of the rail. It is thought that the enhanced mechanical property on the top position of the worn rail might be explained by a mixed effect resulting from a directional microstructure, the decreased lamella spacing of pearlite, and work hardening by the repeated wheel-rail contact stress.

The information about time spent in microenvironments plays a critical role for an exposure assessment of the person concerned, considering the personal exposure relies on the characterization of activity patterns of the population at risk and human activities impact the timing, location, and level of personal pollutant exposure. The purposes of this paper were to present indoor time activity patterns of Korean from a population-based study and to determine individual factors of time spent in microenvironments. The population based study collected time activity pattern of about 32,000 Korean for two consecutive days. The mean times spent at home, other indoors, outdoors, and transportation in related to the whole sample of 19.025 people are 14.23hrs(59.3%), 6.80hrs(28.3%), 1.26hrs(5.2%), and 1.75hrs(7.3%) in weekday, respectively. Database provides information on how the proportion of persons in different locations changes by time of day in weekday. Here, we see that over 90% of respondents were in a residence from about 11 PM to 5 AM, and the largest proportions of respondents in offices, factories, schools and public buildings occur between 8 AM and 5 PM.

Treatment characteristics of benzene were investigated by using a fixed bed reactor system applying a hybrid method over composites of photocatalyst and adsorbent. Various composites were made by mixing photocatalyst with adsorbent, such as activated carbon, activated carbon fiber, and sludge. Performance tests were conducted with benzene concentrations of 1,000～3,000 ppm, Benzene flow rates of 50～100cc/min, and packing weights of 14～24g for the various composite samples. The property of benzene treatment was analyzed concerning BET, SEM, pH, and the conversion efficiency. It was concluded by experimental results that the benzene conversion efficiency of a hybrid method was much higher than that of a photocatalyst only method showing a conversion efficiency range between 13% and 65%. It was also found that the comprehensive feasibility study of the hybrid method would be needed with consideration of various factors including additional expenses.

Characteristics of VOC(benzene) treatment were investigated using a fixed bed reactor system over copper base catalyst and photocatalyst/adsorbent blending material. The copper base catalysts were made by using copper nitrate reagent and various support materials such as γ-Al2O3, TiO2. The parametric tests were conducted at the reaction temperature range of 200～400℃, benzene concentration of 1,000～2,000 ppm, and space velocity range of 5,000～10,000 hr-1. The property analyses such as BET, SEM and the removal efficiency(conversion) of VOC were examined. The experimental results showed that the VOC removal efficiency of hybrid method was higher than that of single method. It was also found that the comprehensive feasibility study of hybrid method would need with considering various factors including additional expenses.

In this paper, water flow test was performed to evaluate the healing performance of self - healing solid capsules based on inorganic materials. The water flow test was used to evaluate the permeability reduction for each healing age with respect to the initial permeability of crack - induced test specimens.

After analyzing the evaluation details of the durability items of the concrete retaining wall for a certain period, the problems were identified. The lack of competency and lack of institutional skills of participating engineers have been analyzed as the main factors, and the improvement of technical and institutional aspects is required.

The condition assessment of the road tunnel is based on the judgment of the responsible engineer about the expansion joint. The evaluation result is divided into the span unit or the sheet unit when calculating the evaluation result. Therefore, it was divided into span units and sheet units and the actual difference was compared.

This paper was examined the compressive strength properties of HPFRCC according to spraying stage as a part of the basic research for development of sprayed HPFRCC for protection and blast resistant of existing structures.

본 연구에서는 강섬유보강 콘크리트의 시공성 및 품질향상 방안의 일환으로 고유동 자기충전 콘크리트(HSCC)에 형상비 및 길이를 달리한 강섬유(SF)를 혼입한 콘크리트를 제조하여 강섬유보강 일반콘크리트(CC)와 유동 및 강도 특성을 비교 검토하였다. 실험결과 SF를 혼입한 HSCC는 높은 유동성 및 점성의 영향으로 SF 자체의 뭉침현상이 발생하지 않아 강섬유보강 CC의 경우보다 유동성능 및 통과성능이 크게 향상되었으며, 동일한 압축강도 범위에서 SF를 혼입하지 않은 HSCC의 경우보다 쪼갬 및 휨강도는 SF의 형상비와 관계없이 길이가 길어질수록 증가하는 경향이 나타났다. 이상의 실험결과를 통하여 강섬유를 혼입한 HSCC를 현장 적용할 경우 기존에 사용되고 있는 강섬유보강 CC의 경우보다 시공성 및 품질 향상이 가능할 것으로 판단된다