The purpose of this study was to determine the consequence of resistance strengthening exercise on the hip flexor and extensor performed to improve functional mobility in stroke patients more than six months post stroke. Seventeen patients were randomized into two groups. Both groups received conventional physical therapy for six weeks. In addition, the experimental group performed eccentric resistance strengthening exercise in the hip flexor and extensor using an isokinetic dynamometer. The hip flexor and extensor strength, stair up and down mobility, timed get up and go (TUG), 10 m gait velocity, and functional reach were repeatedly measured at baseline, three weeks, and six weeks after treatment. The results were as follows: 1. The experimental group improved more remarkably in the hip flexor and extensor strength, stair up and down mobility, and the 10 m gait velocity after three weeks and six weeks of treatment (p<.05), 2. The control group improved significantly in the hip flexor and extensor strength, and 10 m gait velocity after three weeks of treatment (p<.05), 3. At each three and six week point, the experimental group made greater gains in hip flexor and extensor strength, stair up and down mobility, and 10 m gait velocity than the control group (p<.05). In conclusion, it is desirable to perform resistance strengthening exercises combined with conventional physical therapy to improve functional mobility in chronic stroke patients.

The elastic moduli of simulated dry process fuels with varying composition and density were measured in order to analyze the mechanical properties of a dry process fuel pellet. Resonant ultrasound spectroscopy(RUS) which can determine all elastic moduli with one set of measurements for a rectangular parallelepiped sample was used to measure the elastic moduli of UO and simulated dry process fuel. The simulated dry process fuel showed a higher value of Young's modulus than UO due to the presence of metallic precipitates and solid solution elements in the UO matrix. The correlation between Young's modulus and porosity(P) of simulated dry process fuel was found to be 231.4-651.8 P (GPa) at room temperature. Dry process fuel with a higher burnup showed higher Young's modulus because total content of fission product element was increased.

The nano-scale crystallite sizes of uranium oxide powders in simulated spent fuel were measured by the neutron diffraction line broadening method in order to analyze the sintering behavior of the dry process fuel. The mixed and fission product powders were dry-milled in an attritor for 30, 60, and 120 min. The diffraction patterns of the powders were obtained by using the high resolution powder diffractometer in the HANARO research reactor. Diffraction line broadening due to crystallite size was measured using various techniques such as the Stokes' deconvolution, profile fitting methods using Cauchy function, Gaussian function, and Voigt function, and the Warren-Averbach method. The non-uniform strain, stacking fault and twin probability were measured using the information from the diffraction pattern. The realistic crystallite size could be obtained after separation of the contribution from the non-uniform strain, stacking fault and twin.

The simulated DUPIC fuel provides a convenient way to investigate fuel properties and behaviours such as thermal conductivity, thermal expansion, fission gas release, leaching and so on. Several pellets simulating the composition and microstructure of the DUPIC fuel were fabricated from resintering powder through the OREOX process of the simulated spent fuel pellets, which were prepared from the mixture of stable forms of constituent nuclides. This study describes the powder treatment, OREOX, compaction and sintering to fabricate simulated DUPIC fuel using the simulated spent fuel. The homogeneity of additives in the powder was observed after attrition milling. The microstructure of the simulated spent fuel was in agreement with the previous studies. The densities and the grain size of simulated DUPIC fuel was pellets are higher than those of simulated spent fuel pellets. Small metallic precipitates and oxide precipitates were observed on matrix grain boundaries.

The oxidation behavior of the simulated spent fuel of burn up 33 MWD/kgU was investigated to predict that of the spent fuel in the temperature ranges of 400 to and was compared with those of . The forms of uranium oxides after the oxidation were conformed by XRD analyses. The oxidation rate at each the temperature and the activation energy were obtained. After complete oxidation, the simulated spent fuel was converted to and pulverized to powder due to the density difference between the simulated spent fuel and uranium oxides. The activation energies were 85.35 and 30.77kJ/mol in the temperature ranges of 400T()500 and 500T()700, respectively.

The purposes of this study were to classify detailed climate types over the Republic of Korea (ROK) and to delineate their climate characteristics using the new normals of 1991-2020 for 219 weather stations. Total five climate types, Cfa, Cfb, Cwa, Dwa, and Dwb were identified in ROK based on the Köppen’s climate classification criteria. Subtropical climate types, Cfa or Cwa types were broadly covered with 79.9% of 219 stations and the most of remaining stations were included in Dwa types which had a very cold winter and hot summer with wet conditions. In the Trewartha classification, four climate types were identified, one subtropical Cfa, and three temperate Doa, Dca, and Dcb types. Dcb types were found at four stations (Daegwallyeong, Taebaek, Jinburyeong, and Sabuk) in Taebak mountains indicating the extent of cool summer climate types with more stations in mountain areas. The climate characteristics by climate types only were presented the results from the Trewartha classification with the new normals and 66 ASOS stations because Köppen’s climate classification was not appropriate for ROK. The annual mean precipitation of Cfa was the greatest while Dcb the lowest among four types. The annual range was the greatest at Dca types while the smallest at Cfa due to the geographical varieties. More detailed climate types were located in ROK with 219 weather stations and the new normals (1991-2020). However, there were some limitation applying the criteria of Köppen’s and Trewartha’s climate classification to a very complex topographical region.

생강연작재배지 토양에 녹비작물의 재배가 토양 양분의 변 화와 뿌리썩음병원균 경감효과를 알기위해 헤어리베치, 크림 손클로버, 오차드글라스를 80일간 재배 후, 토양에 환원하여 토 양분석 및 real-time PCR 분석한 결과는 다음과 같다. 녹비작 물의 생육은 크림손클로버가 가장 좋았으며, 질수흡수량은 크 림손클로버가 가장 높게 나타났으며, 토양의 인산함량은 오차 드글라스가 가장 낮게 나타났다. T-N 함량은 헤어리벳치 > 크 림손클로버 > 오차드글라스 순으로 나타났다. 또한 토양 내 뿌 리썩음 병원균 밀도분석을 위해 Pythium zingiberum 균 특이 5.8S rDNA를 이용하여 real-time PCR 분석한 결과 헤어리베 치, 오차드그라스 및 크림손클로버 처리의 Ct값은 대조구보다 낮게 나타났다. 이상의 결과를 요약해볼 때 생강연작재배지에 서 녹비처리 후 토양은 대조구에 비해 EC가 감소되고, 몇 몇 무 기성분은 증가하였으며, 뿌리썩음 병원균 밀도는 감소하였다.

본 연구는 시설하우스 내 토마토 연작장해 경감을 위해 단기 녹비작물 재배가 토마토의 생육특성 및 수량에 미치는 영향을 알아보기 위해 토마토 시설재배지에 헤어리베치와 호밀을 단파 및 혼파로 구분하여 파종하였으며, 생육된 녹비작물의 양분공 급량과 녹비작물의 토양환원 후 토양의 이화학적 특성 그리고 녹비작물 환원 후 후작물인 토마토의 생육특성 및 토마토 시들 음 병원균의 밀도를 조사한 결과, 녹비작물의 질소(N), 인(P2O5), 칼륨(K2O), 칼슘(CaO) 및 마그네슘(MgO) 공급량은 헤어리베 치의 경우 각각 26.2, 5.8, 10.2, 6.6, 및 1.5 ㎏/10a였으며, 호밀 은 각각 9.1, 4.2, 11.8, 3.8, 및 3.1 ㎏/10a였고, 혼파의 경우는 단파와 유사한 경향이었다. 토마토 시설재배지에서 녹비작물 의 토양환원 전･후 토양의 pH는 대조구와 별다른 차이 없이 6.37-6.52 범위였으며, EC는 헤어리베치(2.64 dS/m) 및 호밀 (2.62 dS/m) 처리가 대조구(헤어리베치-2.80 dS/m, 호밀 -2.91 dS/m)에 비해 낮았다. 토양 중 유기물, T-N 및 avail. P2O5 함량은 녹비작물 처리가 대조구에 비해 증가하는 경향이 었다. 녹비작물 토양환원에 따른 후작물인 토마토 생육은 녹비 작물 처리는 대조구에 비해 우수한 생육을 보였으나, 관행처리 와는 비슷한 생육을 보였다. 또한 녹비처리에서 토마토 시들음 병원균의 밀도가 현저하게 감소하였다. 이상의 결과를 종합할 때, 토마토 시설재배지에서 녹비작물의 시용은 비료로서 충분 한 가치가 있으며, 녹비작물 토양 환원 후 토양화학성을 개선함 으로써 시설하우스 토마토 연작재배지의 연작장해를 경감할 수 있을 것으로 사료된다.