서부 민간인 통제지역은 경기도 파주시 지역으로는 장단면, 군내면, 진동면을 포함한다. 연천군 지역은 장남면, 백학면, 미산면, 중면에 걸쳐있다. 본 조사에서는 파주시 장단면 일대와 군내면 정자리 덕진산성, 진동면 동파리 일월봉, 임진강변, 수내천, 초리천을 중심으로 세 개 면과 연천군 장남면 반정리의 식물상을 조사하여, 서부 민간인 통제지역의 주요 식물들의 분포를 자세히 파악하고자 하였다. 2012년 4월부터 2014년 9월까지 월 2회 조사를 통해 461점의 표본을 확보하였고, 96과 305속 413종 4아종 41변종 6품종의 464분류군을 확인하였다. 이후 2018년 10월까지 월 1회 조사하였다. 조사 시기 중 멸종위기종 은 관찰되지 않았으며, 우리나라 특산식물로는 고려엉겅퀴, 벌개미취, 키버들 등 6분류군이 확인 되었다. 식물구계학적 특정 종으로는 Ⅳ급종은 5분류군, Ⅲ급종은 7분류군, Ⅱ급종은 14분 류군, Ⅰ급종은 18분류군의 44분류군이 확인되었다. 서부 민간인 통제지역에서 확인된 귀화식물은 단풍잎돼지풀을 포함한 35 분류군으로 전체 식물의 7.5%에 해당한다.

Water quality is characterized by various complex factors. Therefore, a systematic understanding of water quality trends is required to carry out a proper evaluation. In this study, we analyzed the spatio-temporal water quality characteristics of the Nakdong River using five-year data from 2012 to 2016. Data was collected on the pH, DO, BOD, COD, SS, TN, TP, TOC, WT, EC, NH3-N, NO3-N, PO4-P, Chl-a, rainfall, and total and fecal coliforms. A total of 38 water quality measurement stations, from Andong1 to Gupo, were considered. Statistical analyses including trend, cluster, and factor analyses were conducted to identify the dominant water quality components affecting the Nakdong River. The Nakdong River was spatially classified into three groups for up-stream (Andong1 to Sangju1), mid/up-stream (Donam to Dalseong), and mid/down-stream (Hwawonnaru to Gupo) data collection, and temporally into two groups for summer/fall (7~10), and the rest of the season (11~6) data. The water quality of the entire Nakdong River showed trends similar to the mid/down-stream section, which indicates the importance of water quality management in this section. Suspended solids, phosphorus, and coliform groups were established as important factors to be considered in the summer/fall season across the river, especially in the mid/down-stream section. Nitrogen and organic matter were identified as important factors to be considered in the rest of the season, especially in the mid/up-stream section. This study could help determine the water quality components that should be intensively monitored in the Nakdong River.

To investigate the distribution characteristics of grain size and organic matter of surface sediments from the Nakdong-Goryeong Mid-watershed, surface sediments were collected and analyzed. The samples were collected from six sited at four different times between May 2013 and May 2014. The were analyzed for grain size, water content, ignition loss, chemical oxygen demand, total organic carbon and total nitrogen. The surface sediments were mainly composed of medium sand (mean 44.7%) and coarse sand (mean 32.8%) and became coarser in May 2014. Fine sediments at the site NG-2 were poorly sorted and positively skewed, and occur in a tributary environment that is relatively low-energy compared with the other sites. The water content at the studied sites (15.3 ~ 34.9%) averaged 20.25%, and ignition loss (0.4 ~ 5.8%) and total nitrogen (274 ~ 2493 mg/kg) averaged 1.33% and, 696 mg/kg, respectively. These values indicated that the sediments were not seriously contaminated when compared with the sediment pollution evaluation standard of the National Institute of Environmental Research. The chemical oxygen demand (mean 0.17%) was at the non-polluted level compared with United States Environmental Protection Agency sediment quality standards. The total organic carbon (mean 0.18%) at all sites except site NG-2 (lowest effect level) was the no effect level of the Ontario sediment quality guidelines. The COD/IL (0.02 ~ 0.20) and C/N (0.73 ~ 6.76) were less than 1 and 10, respectively. Organic matter in the study area produced naturally from aquatic organisms. Results of principal component analysis showed that fine sediments (very fine sand and silt) were significantly affected by organic matters (ignition loss, chemical oxygen demand, total organic carbon and total nitrogen). In addition, the highest organic matters content in the study area occurred at the site with the finest sediments (NG-2).

Multifunctional weirs constructed through the Four Major Rivers Restoration Project are operated as management water levels. The purpose of this study was to evaluate the effect of water level in the main stem on the tributary water level according to multifunctional weir operation, because the operation of multifunctional weirs for water level management influences the drainage of tributaries. In this study, water level pressure gauges were installed and spatial and temporal water quality was observed. The LOcally Weighted Scatterplot Smoothing (LOWESS) technique was applied to the Nakdong River and the Baekcheon Junction, both upstream of the Gangjeong-Goryeong weir, in order to analyze water quality trends. When considering the overall analysis and observations, it was found that the water quality forecasting point located at the Baekcheon estuary point should be transferred to the Dosung Bridge, which is located upstream of the Sunwon Bridge.

As part of the Four Major Rivers Restoration Project, multifunctional weirs have been constructed in the rivers and operated for river-level management. As the weirs play a role in draining water from tributaries, the aim of this study was to determine the influence of the weirs on the water level of the Nam River, which is one of the Nakdong River’s tributaries. Self-organizing maps (SOMs) and a locally weighted scatterplot smoothing (LOWESS) technique were applied to analyze the patterns and trends of water level and quality of the Nakdong River, considering the operation of the Changnyeong-Haman weir, which is located where the Nam River flows into the Nakdong River. The software program HEC-RAS was used to find the boundary points where the water is well drained. Per the study results at the monitoring points ranging between the junction of the two rivers and 17.5 km upstream toward the Nam River, the multifunctional weir influenced the water level at the Geoyrong and Daesan observation stations on the Nam River and the water quality based on automatic monitoring at the Chilseo station on the Nakdong River was affected strongly by the Nakdong River and partly by the Nam River.

Hexaploid wheat (Triticum aestivum L.) exceeds about 30% of the world’s cereal production and cultivated over 220 million ha worldwide. Heat stress during the grain filling period gives detrimental effect on crop yields and has emerged as a serious problem throughout the world. Korean wheat cultivars that were released since 1960s were developed for various aims such as winter hardness, earliness, and pest resistance, etc. However, heat stress resistance is an emerging target for wheat breeding nowadays. Selected 11 Korean wheat cultivars (“Baegjoong”, “Dajung”, “Goso”, “Hanbaek”, “Jokyung”, “Joeun”, “Jopum”, “Keumgang”, “Olgeuru”, “Sinmichal”, “Uri”) were exposed to high temperature from DAF (days after flowering) 9~13. In this study, plant responses to heat stress as measured by reduction ratios of total chlorophyll contents, 100 seed weight, shoot dry weight can be translated into degree of tolerance. Therefore, these parameters can be used in wheat breeding for heat tolerance during grain filling period. The obtained results allow us to classify cultivars for heat stress tolerance. Pedigree information of Korean cultivars was shown that wheat line of either tolerant, moderate tolerant, or susceptible trait is succeeded to their descendent, which enable breeders to develop heat stress tolerant wheat by appropriate parental choice.

For the development of flow duration curves for the management of 41 Total Maximum Daily Load (TMDL) units of the Nakdong River basin, first, an equation for estimating daily flow rates as well as the level of correlation (correlation and determination coefficients) was extrapolated through regression analysis of discrete (Ministry of Environment) and continuous (Ministry of Land, Infrastructure and Transportation) measurement data. The equation derived from the analysis was used to estimate daily flow rates in order to develop flow duration curves for each TMDL unit. By using the equation, the annual flow duration curves and flow curves, for the entire period and for each TMDL unit of the basin, were developed to be demonstrated in this research. Standard flow rates (abundant-, ordinary-, low- and drought flows) for major flow duration periods were calculated based on the annual flow duration curves. Then, the flow rates, based on percentile ranks of exceedance probabilities (5, 25, 50, 75, and 95%), were calculated according to the flow duration curves for the entire period and are suggested in this research. These results can be used for feasibility assessment of the set values of primary and secondary standard flow rates for each river system, which are derived from complicated models. In addition, they will also be useful for the process of implementing TMDL management, including evaluation of the target level of water purity based on load duration curves.

Recently IPCC (International Panel on Climate Change, 2007) pointed out that global warming is a certain ongoing process on the earth, due to which water resources management is becoming one of the most difficult tasks with the frequent occurrences of extreme floods and droughts. In this study we made runoff predictions for several control points in the Geum River by using the watershed runoff model, SSARR (Streamflow Synthesis and Reservoir Regulation Model), with daily RCP 4.5 and RCP 8.5 scenarios for 100 year from 1st Jan 2006 to 31st Dec 2100 at the resolution of 1 km given by Climate Change Information Center. As a result of, the Geum River Basin is predicted to be a constant flow increases, and it showed a variation in the water circulation system. Thus, it was found that the different seasonality occurred.

In recent years, the United States has used the Load Duration Curve (LDC) method to identify water pollution problems, considering the size of the pollutant load in the entire stream flow condition to effectively evaluate Total Maximum Daily Loads (TMDLs). A study on the improvement of the target water quality evaluation method was carried out by comparing evaluations of two consecutive years of water quality and LDC data for 41 unit watersheds (14 main streams and 27 tributaries). As a result, the achievement rate of the target water quality evaluation method, according to current regulations, was 68-93%, and that by the LDC method was 82-93%. Evaluating the target water quality using the LDC method results in a reduction in the administrative burden and the total amount of planning as compared to the current method.

Near infrared reflectance spectroscopy (NIRS) has been used as a rapid analysis tool to many components in cereal grains. This study was to investigate the potential NIRS application for determination of components in Korean wheat. Main components of wheat quality are protein content, moisture content, SDS-sedimentation volume and ash content. Wheat has screened for quality, hardness of seed by NIRS in CIMMYT (International Maize and Wheat Improvement Center). NIRS calibration was used as a rapid and simultaneous analysis method to determine the wheat quality components. A total of 282 wheat samples, collected from a wide range of Korean wheat cultivation region for 2 years, were analyzed by NIRS. NIRS calibration of individual components were developed using first derivation, second derivation and modified partial least-squares regression and internal cross validation method. As a result, calibration formula of protein was y=0.937x+0.786, calibration formula of moisture was y=0.922x+0.911, calibration formula of ash was y=0.933x+0.08, calibration formula of SDS-sedimentation volume was y=0.947x+2.150. NIRS calibration for wheat quality may be useful for determining protein(R2 = 93.6), moisture(R2 = 91.6), SDS-sedimentation volume(R2 = 94.3), and ash(R2 = 93.4). This study shows that 4 calibrations of NIRS is a useful application in the accurate and rapid determination of wheat quality. Therefore, NIRS could be used to rapidly determine the quality contents of wheat for grade evaluation in a purchasing of wheat cultivation region.

This study was carried out to identify the optimum seeding dates for selecting a double-cropping system and to assess the effect of polyethylene film mulching on the yield of Proso millet. Seeds of the varieties Hwanggeumgijang and Ibaegchal were sown in Miryang on five different dates: 1st (May 25), 2nd (June 15), 3rd (June 25), 4th (July 5), and 5th (July 15), with and without polyvinyl mulching. The varieties have different characteristics, for example, Hwanggeumgijang is an early-maturing type and more sensitive to temperature, whereas Ibaegchal is a medium-maturing type and more sensitive to the duration for which it is exposed to sunlight. Late-sown Hwanggeumgijang had a short heading date from seeding and required a low accumulated temperature. It also had a shorter period of heading, a shorter culm length and a shorter diameter of stem. In contrast, it had had a higher number of ears per m2 although similar ear length and similar 1000-grain weight. The yield potential of Hwanggeumgijang was found to decrease at a late seeding date. In particular, it significantly decreased at the seeding date of July 15. In the case of cultivation with polyvinyl mulching, the period of heading was shorter by 2–4 days and the yield potential was increased by approximately 12–32%. The length and diameter of culm in Ibaegchal were slowly decreased, but the length of ear, the 1000-grain weight and the yield potential were similar for all seeding dates (except July 15) and cultivation with and without mulching. When sown late, the length and diameter of the culm of Ibaegchal very rapidly decreased by the July 15 seeding date. The protein content of Ibaegchal was higher but the amlyose content of Ibaechal was lower compared to Hwanggeumgijang. At late seeding dates, the protein contents of the two varieties increased but the amylose contents were similar.

The preaent study was conducted to investigate the effect of mixed seeding of three wheat variwties, ‘Anzunbaengimil’, ‘Jokyoung’, and ‘Sooan’, on agricultural characteristics and quality of plants to select the most suitable mixed seeding ratio. We observed that the yield of plants obtained from the mixed seeding combinations was higher than those obtained from single seeding of the three varieties. The yield was high, especially for the combinations ‘Sooan’ and ‘Anzunbaengimil’ (80 and 20%, respectively) and ‘Sooan’ and ‘Jokyoung’ (90 and 10%, respectively). The protein content of the seedlings obtained from the above two combinations was higher than in the seedling of ‘Sooan’. Based on our results, we suggest that mixed seeding of wheat varieties is more effective than single seeding in improving the yield and quality of plants obtained from mixed seeding.

In this study, We developed the framework for the vehicle damage estimation according to flood disaster. Especially, we constructed the vehicle inventory DB using dasymetric mapping, and suggested methods for the vehicle classification, asset valuation, depth-damage curve.

Among the various disasters caused by climate change, flooding has account for more than 70% for domestic disaster. This study develops an integrated system that be able to express and spread the disaster information, which can corresponds to the flooding. DRiMSS developed in this study consists of four modules, including RASS, LeVAS, FROK, and FRIENDs. DRiMSS is applied to Sungseo industrial complex in Daegu, and it is confirmed that DRiMSS can produce, express, and spread various disaster information according to the progress of the flooding.

This study was conducted to investigate the mixed seeding of 5 forage barley varieties (youngyang, yuyeon, dami, wooho, soman) with 1 malting barley variety (hopum). Yield of the mixed seeding was compared with each single seeding and variety combinations. Yield of mixed seeding combination was higher than each single seeding. In mixed seeding of ‘Youngyang’ and ‘Hopum’ (50% and 50% ratio), ‘Yuyeon’ and ‘Hopum’ (70% and 30% ratio), ‘Dami’ and ‘Hopum’ (50% and 50% ratio), ‘Wooho’ and ‘Hopum’ (50% and 50% ratio) were higher yield of dry weight than yield of other mixed ratios. Most of all, mixed seeding of ‘Dami’ and ‘Hopum’ were high yield mixed seeding (ratios of 50% each other). In generally, the yields of barley mixed seeding with malting barley ‘Hopum’ were high production. The forage quality of mixed seeding combination was higher than any each single seeding. ‘Youyeon’ 50% and ‘Hopum’ 50% ratio was more higher

총체생산성이 높은 밀품종을 육성하기 위해 장간, 다수성인 Kanto75/8/탑동밀/4/Bb#1/장광//STRAMCHO/3/수원220호/5/수원185호/CI 12703//관동75호///수원219호/7/F 1277에서 유래한 우량계통을 모본으로 하고, 중단간이면서 농업적 특성이 우수한 식용 밀 표준품종인 금강밀을 부본으로 하여 1998년에 농촌진흥청 국립식량과학원에서 육성하였다. 계통육종법으로 전개하여 초형이 우수하고, 장간인 SW98008-YB-7-5-1-1-2 계통을 선발하였다. 3년간 생산력검정 예비시험과 생산력 검정 본시험을 실시한 결과, 총체수량이 우수하여 ‘익산326호’로 계통명을 부여하였다. 2008년부터 2009년까지 지역적응성 시험을 수행하여 총체수량성이 높고 한해에 강한 계통으로 입증되어 2009년 12월 직무육성품종선정심의회에서 신품종으로 선정됨과 동시에 ‘청우’로 명명하였다. 그 후 국립종자원의 재배심사를 거쳐 2013년 종자산업법 제55조에 따라 품종보호 등록원부에 등록(품종보호 제4311호) 되었다. ‘청우’는 잎색이 진녹색이고, 잎폭은 중간 정도이며, 줄기는 길고 직립형태는 중간 정도로 뻗은 형태이다. 이삭은 중간 정도의 길이고, 이삭의 까락은 황백색이고 길이가 길며, 종실의 크기는 중간 정도이고, 종실색은 백색을 띄는 백립계이다. 출수기는 밭상태에서 4월 22일로 대비품종인 금강밀보다 1일 빠르고, 논상태에서 4월 24일로 금강밀과 유사하였다. 황숙기는 밭상태에서 5월 19일로 금강밀보다 2일 빠르고, 논상태에서 5월 22일로 1일 빠르다. 초장은 91 cm로 표준품종인 금강밀보다 장간형이고, 수장은 7.1 cm로 금강밀보다 0.9 cm 작은 편이지만, 경수는 1,070개/m2로 많다. 건물수량은 14.8 MT/ha으로 표준품종인 금강밀에 비해 12% 증수한 다수성이다. 조사료 품질은 표준품종 금강과 비교하여 유사하나, TDN 수량은 ha당 10.0 MT으로서 9.0 MT인 금강에 비해 높다.

농촌진흥청 국립식량과학원에서는 용도별 품종의 다양화를 위해 답리작 적응 과자용 밀 품종 ‘고소’를 개발하였다. 고소밀은 1998년도에 연질인 고분밀을 모본으로 하고, 숙기가 빠른 올밀을 부본으로 인공교배하여 SW98148 조합을 육성하였다. 경기도 연천에서 집단재배 후 계통을 전개하여 초형과 수형이 양호하며 내한성이 강한 계통인 SW98148-YB-9-2-4-1-3-1을 2006년부터 2개년간 생산력 검정을 거쳐 ‘익산 320호’로 계통명을 부여하였다. 그 후 2008년부터 3개년 동안 지역적응시험을 실시한 결과 숙기가 빠르며 수량성이 높고, 과자적성이 우수하여 2010년 농작물 직무육성 신품종심의회에서 ‘고소’로 명명하였다. 고소밀의 파성은 Ⅱ형으로 춘파형이고, 엽색은 녹색이며 이삭은 방추형이고, 종자는 중간 크기로 적색이다. 출수기와 성숙기는 밭상태 조건에서 각각 4월 28일과 6월 7일, 논상태에서는 각각 4월 25일과 6월 4일로 비슷하다. 고소밀의 리터중(799 g/L)과 천립중(42.5 g) 은 금강밀(804 g/L과 46.7 g)보다 낮고, 내한성(4.4%)과 수발아(4.0%) 저항성이 강하고, 내도복성이 높다. 고소밀의 제분율(63.77%), 단백질(9.8%), 침전가(30.0 ml)과 글루텐(7.2%) 함량은 금강밀(73.6%, 12.6%, 50.0 ml과 10.8%)보다 낮고, 과자적성이 우수하였다. ‘고소밀’의 HMW-GS 조성은 Glu-A1에서 2*, Glu-B1에서 7+8을 나타내 금강밀과 조성이 같았으나, Glu-D1에서 2.2+12가 발현되었다. GBSS 조성은 금강밀과 같은 야생형이고, Pinb-D1은 야생형으로 금강밀과 다른 특성을 나타냈다. 지역적응시험에서 밭상태 수량은 657 kg/10a, 논상태 수량은 561 kg/10a로 금강밀보다 21%와 7% 증수하였다.

High temperature is one of major environmental stress. Heat tolerance managing is difficult through the phenotypic selection, so marker assistant selection (MAS) using molecular markers like as RAPD, SSR etc. was tried to select useful traits for heat tolerance. Fourteen SSR markers reported by previous research were selected for this research. We tried to evaluate 14 SSR markers for MAS using 31 useful wheat resources including 24 crossing line from Turkey, six Korean wheat cultivars and Chinese spring. The average of the number of alleles and PIC values in this study were 6.14 and 0.64, respectively. Two major clades and four sub clades were grouped by phylogenetic tree using UPGMA. Four Korean wheat cultivars were distinct from other Turkey resources in the phylogenetic dendrogram. From the results, we expected that these markers were able to adapt to screening wheat genotyping for heat tolerance.

국내 밀 수량성 향상을 위해 이삭 길이가 길고 1수립수가 많은 장수형 계통의 품질과 이들 특성과 관련된 표지인자에 대한 평가를 수행하였다. 장수형 164계통의 회분, 단백질, 침전가, 습부율, 밀가루 입자 크기와 밀가루 색택 밝기의 평균은 금강밀보다 회분과 단백질함량이 높으며 습부율은 높고, 밀가루 밝기와 입자 크기는 비슷하였으나 침전가는 낮게 나타났다. 단백질의 질적 특성에서 단백질함량은 침전가, 습부율, 밀가루 입자 크기와 고도의 정의 상관을 보였고, 밀가루의 밝기와는 부의 상관을 나타냈다. 품질특성 관련 표지인자를 평가한 결과, 장수형 164계통은 모두 Glu-A3c, Wx-A1a, Wx-B1a, Wx-D1a의 유전자형을 나타내 금강밀과 동일하였다. 장수형 계통은 주로 Glu-A1c, Glu-B1c, Glu-D1a, Glu-B3g, Pina-D1b와 Pinb-D1b의 유전자형이 많았다. Glu-A1b과 Glu-B1b 유전자형은 단백질함량이 많고, 습부율이 높은 특성을 나타냈다. Glu-D1d, Glu-B3h과 Pinb-D1b 유전자형은 다른 유전자형에 비해 회분과 단백질함량이 많으며, 침전가와 습부율이 높고, 밀가루 입자가 크고, 밀가루의 색이 어두운 특성을 보였다. 이러한 결과를 통해서 장수형 계통은 수량성 증대를 위해 필요하고, 향후 용도별 품질 우수 자원의 특성을 집적하여 용도별 다수성 밀 품종개발을 위한 자원으로 활용하고자 한다.

국내 밀의 수량 증진을 위해 이삭 길이가 길고 1수립수가 많은 장수형 164계통(F8)을 육성하였고, 본 연구에서는 이들 계통의 주요 농업형질과 이들 특성과 관련 있는 표지인자에 대한 평가를 수행하였다. 장수형 계통은 모본인 금강밀과 비교했을 때, 단위면적당 수수와 리터중은 적고, 파종 후 출수까지 일수가 길었고, 간장, 수장, 1수립수와 단위면적당 생산량은 높게 나타났다. 농업 특성 관련 표지인자를 평가한 결과, 장수형 계통은 Rht-B1, Rht-D1, Vrn-B1, Ppd-A1, Ppd-B1 유전자 좌에서는 같은 유전자를 지닌 것으로 나타났다. 장수형 계통 중 Vrn-D1를 지닌 계통은 Vrn-D1a를 지닌 계통에 비하여 출수에 걸리는 시간이 길었지만, 이삭길이와 1수립수가 많은 것으로 나타났다. 하지만 Vrn-B1 유전자 변이는 장수형 계통의 농업형질의 차이가 없는 것으로 나타났다. 장수형은 Ppd-D1유전자 변이에 따른 간장이나 이삭 길이는 차이가 없었지만, 출수 일수와 수수는 Ppd-D1b를 지닌 계통이 많았지만, 1수립수, 천립중, 리터중과 수량은 Ppd-D1a를 지닌 계통이 높았다. 종실 특성을 나타내는 표지인자 변이는 출수 일수, 간장, 수장, 분얼이나 1수립수 및 수량에는 영향을 주지 않았지만 TaSus2-2B유전자의 Hap-L타입, TaGW2유전자의 Hap-6A-G타입과 TaCwi-A1a 가 각각의 대립 유전자형보다 천립중이 높게 나타났다. 향후 재배환경이 장수형의 농업형질 및 품질에 미치는 영향에 대한 평가가 필요하고, 만숙과 분얼이 적은 장수형의 단점을 보완하기 위한 지속적인 연구가 필요하다.