Abbreviation is one of the typical examples of using language. Traditionally, abbreviations are classified into the following four major categories in English morphology: (i) initialism, (ii) acronyms, (iii) clipping and (iv) blending. This research examines types of abbreviatory expressions in Korean from a sociolinguistic perspective. This study first provides a brief analysis of types of abbreviations in Korean, mainly in terms of morphology. The examination shows that in Korean the distinction between initialism and acronym does not hold because of the nature of the syllable-based writing system of Korean, and that acronym is the most widely used types of abbreviation. Second, the study discusses linguistic motivations which are at work in the formation of abbreviations mainly in terms of economic motivation and motivation of distinctiveness. Third, this research explores conditions on the use of abbreviations in terms of sharedness of the information about the referent being talked about. It also shows the property of exclusiveness in the sense that members of a certain speech community share the meanings of the abbreviations. In addition, it explores functions of abbreviations in the following terms: maintaining solidarity, excluding outsiders, novelty, temporariness, and so on. Finally, this paper shows that not only a morphological approach but also a sociolinguistic perspective is necessary in order to fully account for the formation and use of abbreviations in language.

본 연구는 현대 기업경영에서 혁신이 차지하는 중요성과 핵심자기평가 관련 연구의 부족을 인식하면서 핵심자기평가, 직무만족, 그리고 혁신행동 간의 관계들에 초점을 맞추었다. 선행연구들의 이론적 주장과 설명을 바탕으로 매개작용 모형이 제안되었다. 핵심자기평가의 직무만족 및 혁신행동 각각과의 관계를 검증하면서 핵심자기평가와 혁신행동 간의 관계에 대하여 직무만족이 갖는 매개작용을 조사하였다. 제안된 연구모형은 울산광역시에 위치하고 있는 은행과 증권회사 지점의 직

상수리나무와 굴참나무는 한반도 저지대 인가 근처에서 자생한다. 그러나 상수리나무는 토양조건이 양호한 곳에서 분포하나 굴참나무는 이 종에 비해 건조하고 경사가 급한 곳에 서식한다. 이러한 두 종의 분포적 특성을 밝히기 위하여 유식물에 주요 환경요인 중 광, 수분과 영양소를 각각 4구배로 처리하고, 2007년 3~10월가지 양묘하여 두 종의 생태적 지위와 생태적 중복역을 분석하였다. 상수리나무의 생태적 지위폭은 환경요인 중 수분과 영양소가 광에 비

The esterification of free fatty acid in Jatropha oil added by propylene glycol using p-TSA catalyst was done, and then the transesterification of Jatropha oil added by 1.0vol% GMS as an emulsifier using TMAH, and mixed catalyst(60wt%-TMAH+ 40wt%-KOH) respectively was followed at 60℃. The esterification conversion at the 1:8 molar ratio of free fatty acid to methanol using 8.0wt% p-TSA was 94.7% within 60min. The overall conversion at the 1:8 molar ratio of Jatropha oil to methanol and 60℃ using mixed catalyst was 95.4%. The kinematic viscosity of Biodiesel using TMAH and mixed catalyst in 24h met the ASTM D-6751 above 30℃, and showed a little more than its criterion.

우리나라 농촌현실에 적합하면서 고품질의 친환경 농산물 생산을 위한 청정용수공급이 가능한 FDA 시스템을 개발하였다. 기존의 필터제품의 문제점을 개선하고 보다 경제적이고 기능적인 면을 고려하여 시설재배단지에 청정용수공급을 목표로 시설용수공급시스템을 개발하였다. 시설용수 공급시스템 모듈통합기법으로 개발된 FDA시스템은 여과와 흡착 그리고 자외선 모듈을 거치는 과정으로 구성되어 있다. 본 제품의 시작품 생산은 3단계의 평가과정을 거쳐 진행 되었다. 이 과정을 통해 시설용수공급시스템의 구성품별 사양을 제시하고 적정처리용량 및 모듈통합기법을 개발하였으며, 현장 설치지역(시설재배농가)의 재배현황 및 수질을 조사하여 적합한 시설용수 공급시스템 요소기술(살균, 여과)을 설계하였고, 실제 현장에 적용할 수 있는 시작품을 제작하여 현장 설치를 위한 실내 성능시험을 수행하였다. 또한 시작품 현장 설치 후 시설용수 공급시스템 유입 전․후 수질분석을 실시하였으며 모니터링을 통해 시설재배용수 온도조절장치와 폭기 장치에 대한 개선방안을 제시하여 시작품의 보완제작을 실시하였다. 시작품의 현장적용성 평가에서는 시작품의 수질정화능력평가 및 사용자 입장에서의 개선점 파악을 실시하였는데 그 결과 시스템의 수질정화능력은 목표치 이상이었으나, 수온유지, 저수조 용량문제, 누수현상, 역류현상, 적정수압유지 등의 개선점이 파악되었다.

SnO nanosheets were prepared at room temperature through a reaction between an aqueous solution of SnCl2, N2F4, and NaOH and were converted into SnO2 nanosheets without a morphological change. The SnO nanosheets were formed through a dissolution-recrystallization mechanism. Uniform and well-dispersed SnO nanosheets with the round-shape morphology were attained when the solution was treated by ultrasonic sound immediately after the addition of NaOH. The SnO2 nanosheets prepared by means of solution reduction under the ultrasonic treatment, and subsequent oxidation at 600˚C showed a high level of gas sensitivity to C2H5OH and CH3COCH3.

Pretreatment of eliminating FFA is needed to make biodiesel from animal fat recovered from leather wastes because its acid value is high. This study was carried out to investigate the influence of 4 different pretreatment methods, which are heterogeneous catalyst method, ion exchange resin method, low pressure.high temperature method, and alkali method on the eliminating FFA and fatty acid composition. The results showed that the rate of eliminating FFA increased in the order of alkali method > catalyst method > low pressure high temperature method > ion exchange method. In the case of pretreatment of alkali method using NaOH, the rate of eliminating FFA appeared more than 86% regardless of acid value. Therefore, it was considered that alkali method using NaOH was the most effective in the view of economical and productive aspects, taking it into account that the acid value of animal fat recovered from fleshing scrap generated during leather making processes was 7 to 8.

Fleshing scrap is a kind of wastes produced during leather making process and used in the test of manufacturing biodiesel. The early step of manufacturing biodiesel is fat recovery from fleshing scrap. Hence, we investigated the influence of the way of fat recovery on the fatty acid composition. We used three different recovery ways, that is chemical method by protein decomposition with acid/fat recovering, physical method by protein denaturalization with heat and vacuum/fat pressing, and biodiesel method by protein decomposition/fat recovering. The biological method yielded the best results in terms of appearance transparency. It was most effective to lower acid value. Also the recovered fat by biological method would be favorable methyl-ester reaction raw material for biodiesel because it contains more than 5% of oleic acid among unsaturated fatty acid.

The sintering behavior and mechanical property of Mo nanopowder was investigated as a function of various sintering condition. Mo oxide nanopowders were milled using a high energy ball-milling process. After the ball milling for 20h, the crystalline size of was about 20 nm. The nanopowders were reduced at the temperature of without holding time in atmosphere. The sinterability of Mo nanopowder and commercial Mo powder was investigated by dilatometric analysis. Mo nanopowder and commercial Mo powder were sintered at for 1 hand for 3 h, respectively. In both specimens the measured relative density was about 95%. But the measured hardness values were 2.34 GPa for nanopowder and 1.87 GPa for commercial powder. Probably due to finer grain size of the sintered body prepared from Mo nanopowder than that prepared using commercial Mo powder. The mean grain sizes were measured to be about 1.4 mm and 6.2 mm, respectively.

The transesterifications of beef tallow and the mixture of beef tallow and rapeseed oil were conducted at 65℃ respectively using TMAH, NaOH and their mixed catalysts. The reactants were emulsified with 1vol% emulsifier and propylene glycol. The overall conversion of beef tallow was 95% at such optimum conditions as the 1:8 of molar ratio and 0.8 wt% TMAH. The overall conversion of mixed fat at the 1:8 of molar ratio and mixed catalyst of 70 wt% TMAH 30 wt% NaOH was close to 97% which appeared at 0.8 wt% TMAH in 80min. And the kinematic viscosity of biodiesel mixture using the mixed catalyst was 6.5mm2/s at 40℃.

고온의 맑은 날 양지에 자가용을 주차시키는 것이 기온상승에 미치는 영향을 조사하였다. 이를 위하여 양지와 음지에 주차되어 있는 차량을 대상으로 차의 상판과 차 내부의 온도를 27시간에 걸쳐서 측정하였다. 뿐만 아니라 양지와 음지를 대상으로 아스팔트와 토양의 표면온도 및 몇 가지 기상요소를 동시에 관측하였다. 이렇게 얻어진 자료를 이용하여 낮 동안에 아스팔트, 나대지 그리고 차의 상판에서 대기로 공급되는 현열을 산출하였다. 그 결과는 다음과 같다. 1) 나대지, 아스팔트 그리고 차의 상판온도는 낮 동안에 각각 30∼37˚C, 37∼46˚C 및 42∼49˚C까지 상승함을 확인할 수 있었다. 2) 양지에 주차된 차량의 상판에서 대기 중으로 수송되는 현열의 양은 아스팔트와 나대지 표면에 비하여 훨씬 많은 것으로 밝혀졌다. 차량 상판과 지표면간의 현열플럭스 차이는 낮 동안에 최대 약 60(아스팔트표면), 85(나대지 표면) W/m2에 이르렀다.

잠열과 관련된 지표면 증발산량은 지표 온도를 결정하는 중요한 요인이며, 이를 정확히 산정하는 것은 중규모 순환장 예보의 정확도와 밀접하게 관련된다. 본 연구에서는 고해상도인 LANDSAT 5 TM 자료를 이용하여 대구광역시의 상대 증발산 효율을 추정하였다. 증발산 효율 추정은 복사 온도/식생 지수의 관계식을 이용하였다. 식생 지수는 대구광역시의 실제 토지 이용도와 일치하였다. 도시 지역내의 공원 지역의 경우 낮은 복사 온도를 나타내었다. 이것은 두류공원과 같은 도심내 공원 지역의 고증발산에 기인한 것이다. 그러나 전체적인 도심지는 저증발산이 두드러졌다. 그리고 지표면 구성특징에 의하여 도심지 내 공단 지역과 주거 지역은 상대적인 증발산 분포에서 차이가 나타났다.

The esterification of palmitic acid in rapeseed oil and methanol emulsified by propylene glycol with PTSA(p-toluene sulfonic acid) was followed by the transesterification of rapeseed oil into biodiesel with 1(w/v)% GMS(glycerol monostearate) as an emulsifier using TMAH(tetramethyl ammonium hydroxide) catalysts at 60℃. The former reaction was optimized at the 1:20 of molar ratio of oil to methanol and 5wt% PTSA, and the latter was optimized at the 1:8 of molar ratio of oil to methanol and 0.8wt% TMAH. The overall conversion into biodiesel was 98% after 60min of reaction time at the 1:8 of molar ratio, 0.8wt% TMAH and 60℃. TMAH was a good catalyst to control the viscosity of biodiesel mixture.

This research explores the linguistic modes of animated cartoon programs focusing on such areas as program titles, subtitles, character names, theme song verses and dialogues in the programs aired by three major broadcasters. Among those that surface prominently are the use of foreign languages and unnecessary foreign borrowings in all research areas; the uses of language of explicit violence and sexuality in theme songs; and violations of linguistic norms involving slang or substandard expressions and grammatical errors. Some issues include the use of an inordinate level of violent and pejorative language, excessive occurrence of foreign words and/or foreign borrowings and foreign-sounding non-words (i.e. nonce words), grammatical violations, and the use of lexis inappropriate for the target audience. These aspects are related to the current state of affairs in the broadcasting industry: the separation of production and broadcasting (i.e., most programs are produced by external program-manufacturers, whose major concerns are marketability and viewer interest rather than the inherent quality of the programs). This research calls for concern over the good of young viewers and of regulation and supervision over broadcasting contents.