This study was conducted to identify the optimal root zone temperature for paprika cultivation, with an aim to increase the heating and cooling energy efficiency and prepare for extreme weather conditions. The greenhouse air temperature was maintained at 20oC and 25oC during the daytime (12 hours) and at 18oC during the nighttime (12 hours). The plant height did not show any significant differences between the treatment with air temperature and root zone temperature. The root length was highest under an air temperature of 25oC with root zone temperatures of 25oC and 30oC, and it was the lowest at 15oC. The leaf number was the highest when the root zone temperature was adjusted to 25oC and 30oC across all air temperatures. The leaf area increased with higher root zone temperatures, but considering the compactness of the seedlings, a root zone temperature of 25oC was found to be the most effective. The fresh and dry weight of the shoot increased with higher root zone temperatures at an air temperature of 25oC, while the fresh and dry weight of the roots tended to be higher when the root zone temperature was adjusted to 25oC and 30oC across all air temperatures. The compactness was most effective when the root zone temperature was adjusted to 20oC and 25oCC across all air temperatures. Based on the above results, adjusting the root zone temperature to 25oC at an air temperature of 25oC was found to be effective for the early growth of Paprika. The results of this study suggest that not only can growth be promoted through the regulation of root zone temperature, but it also contribute to the establishment of root zone temperature control technology, which can prevent an excessive drop and rise in the root zone temperature.

Recently, a number of researchers have produced research and reports in order to forecast more exactly air quality such as particulate matter and odor. However, such research mainly focuses on the atmospheric diffusion models that have been used for the air quality prediction in environmental engineering area. Even though it has various merits, it has some limitation in that it uses very limited spatial attributes such as geographical attributes. Thus, we propose the new approach to forecast an air quality using a deep learning based ensemble model combining temporal and spatial predictor. The temporal predictor employs the RNN LSTM and the spatial predictor is based on the geographically weighted regression model. The ensemble model also uses the RNN LSTM that combines two models with stacking structure. The ensemble model is capable of inferring the air quality of the areas without air quality monitoring station, and even forecasting future air quality. We installed the IoT sensors measuring PM2.5, PM10, H2S, NH3, VOC at the 8 stations in Jeonju in order to gather air quality data. The numerical results showed that our new model has very exact prediction capability with comparison to the real measured data. It implies that the spatial attributes should be considered to more exact air quality prediction.

This study evaluated the antimicrobial efficacy of different concentrations of ozonated water with organic matter, fetal bovine serum, at different concentrations and incubation times with bacteria. In the absence of organic matter, total eradication of up to 5 log of Escherichia (E.) coli was achieved, however, interference by organic matter led to inefficiency of ozonated water as a disinfecting agent. In addition, diminishing antimicrobial effects at higher temperatures, even in the absence of organic matter, were also demonstrated. These findings indicate that ozonated water will be a safe and effective disinfectant agent that could be useful in meat processing, especially an intestine processing, in Korean slaughter houses.

본 연구는 반추동물의 조사료 자원으로서 거대억새를 개발하기 위한 목적으로 수행되었다. 우리나라에서 새롭게 개발된 품종인 거대억새 1호를 완숙기 이후에 채취하여 in vitro 반추위 발효를 이용해반추위내 pH, 암모니아태 질소, 가스발생량, 휘발성 지방산 생성량 및 건물소화율을 조사하였으며,볏짚과 비교하여 평가하였다. 거대억새는 볏짚에 비하여 유의적으로 높은 반추위내 pH를 나타내었다(p<0.01). 암모니아태 질소의 경우 배양 12시간 이후에는 두 처리구간의 유의적인 차이를 나타내지 않았다 (p>0.05). 배양 6시간 이후 부터는 거대억새의 가스발생량이 볏짚에 비하여 유의적으로 낮게 나타났다 (p<0.05). 휘발성 지방산 생성량에 있어 acetate, propionate, butyrate, valerate 및 총생상량에서 볏짚이 거대억새보다 높게 나타났다. 그러나 iso-butyrate와 iso-valerate에서는 두 조사료원별 차이는 발견되지 않았다. 건물소화율에 있어 배양 12~24시간 사이의 거대억새 소화율이 볏짚에 비하여 유의적으로 나타났다. 결론적으로 거대억새의 이용성은 볏짚의 약 80% 수준인 것으로 나타났다.

Cordyceps has been used in traditional Chinese medicine more than 2000 year ago. In this study, the new Cordyceps militaris was founded and isolated from O-dae mountain in Korea, and was identified its genetic characteristics. The newly isolation strain HB8 was most closet to Cordyceps militaris W141449 (99.82%), Cordyceps militaris JLCY-LI819 (99.82%) and Cordyceps militaris 4642 (99.81%), respectively. the genotypic result was show that train HB8 was belonging to the Cordyceps militaris genus, therefore, Cordycep militaris HB8 proposed with accession number MT835161. This study we find the optimal condition for production of cordycepin from Cordyceps militaris HB8 was 8 ㎎ /g (200 g of pupa, 1 g of KH2PO4, 0.5 g of K2HPO4, 20 g of glucose, 1 g of MgSO4, 0.05 g of vitamin B1, and 1 ㎎ of NAA per liter; light condition 300-700 Lux and day/night was 14 h/10 h) and the optimum condition for the production of adenosine was 2.6 ㎎/g (15 g of skim milk powder, 1 g of KH2PO4, 0.5 g of K2HPO4, 20 g of glucose, 1 g of MgSO4, 0.05 g of vitamin B1, and 1 ㎎ of NAA per liter; light condition 300-700 Lux and day/night was 14 h/10 h).

Background : In recent years, the demand for oriental cuisine has increased due to the increase of multicultural families and dietary changes, and Coriandrum sativum is also consumed steadily. Therefore, this study was conducted to establish the optimum planting density for high-quality seed production of Coriandrum sativum in order to increase the utilization of leafy vegetables and establish a foundation for production throughout the year through house cultivation Methods and Results : This experiment was carried out from March to August 2017 at a house facility located in Namwon-si (500 m above sea level) in Jeollabuk-do. Seeds of Coriandrum sativum were sown on March 10, 2017 and planting density was set at 4 levels of 10 × 5 ㎝, 10 × 10 ㎝, 10 × 20 ㎝, and 10 × 30 ㎝. Seeds were harvested on August 2 and 142 days after sowing. Growth characteristics of C. sativum were investigated on May 16, 66 days after sowing. Plant height, leaf length and leaf width were good at 52.9 ㎝, 3.8 ㎝, and 4.1 ㎝ in planting density of 10 × 10 ㎝, respectively, but there was no statistically significant difference between treatments. As a result of examining the number of leaflets per plant, 20.9 leaves in 10 × 30 ㎝ treatment was the best and the difference was significant. The fresh weight of the overground part was the highest at 2,322 ㎏/10a in 10 × 10 ㎝ treatment. The total fresh weight of the overground and underground parts were 2,633 ㎏/10a and 2,572 ㎏/10a at 10 × 10 ㎝ and 10 × 20 ㎝, respectively. The total weight of seeds per treatment was the highest at 146 ㎏/10a at 10 × 10 ㎝ treatment, but the difference was not significant. Conclusion : As a result of the experiment to determine the proper planting density, the growth characteristics and the total weight of seeds were good at 10 × 10 ㎝ treatment, but there was no statistically significant difference. Therefore, when C. sativum are cultivated for the purpose of seed production, the planting density of 10 × 30 ㎝ is considered to be the most appropriate for seed requirement and labor saving.

Background : This study was carried out to investigate the possibility of cosmetics materials by comparing growth characteristics, photosynthetic rate and major functional components of Rosa multiflora and Perilla frutescens at different altitudes. Methods and Results : This experiment is being carried out in April 2018 in Namwon (500 m above sea level) and Iksan (15 m above sea level) in Jeollabuk-do. The growth characteristics of R. multiflora were investigated at the end of May. Flowers were collected at this time and used as samples for functional analysis. The growth characteristics of P. frutescens were investigated in the middle of August and the ground part was collected at this time and used as a sample for functional analysis. Photosynthetic rates were measured using LCpro+ (ADC, UK). The marker compound were investigated and analyzed using HPLC Alliance e2695 and 2998 PDA detector (Waters, USA). Photosynthetic rate (based on 1,600 μ mole of light intensity) was measured in mid-June as follows. The R. multiflora showed 9.8 μ mole․CO2/㎡/s in Iksan and 7.9 μmole․CO2/㎡/s in Namwon. The P. frutescens showed 15.0 μmole․CO2/㎡/s in Iksan and 8.8 μmole․CO2/㎡/s in Namwon. Overall, Photosynthetic rate was higher in Iksan. As a result of analyzing 18 kinds of marker compound, gallic acid and astragalin were found in R. multiflora, caffeic acid and rosmarinic acid were found in P. frutescens. Gallic acid and Astragalin of R. multiflora showed 5.4 ㎎/g and 28.4 ㎎/g in Iksan and 3.2 ㎎/g and 21.6 ㎎/g in Namwon, respectively. Caffeic acid and rosmarinic acid of P. frutescens were 2.7 ㎎/g and 49.7 ㎎/g in Iksan and 2.5 ㎎/g and 33.6 ㎎/g in Namwon, respectively. Conclusion : Comparing the yield of the harvesting parts by region, both R. multiflora and P. frutescens was higher in Namwon. As a result of quantitative analysis of four detected elements of gallic acid, astragalin, caffeic acid and rosmarinic acid, all four components were high in Iksan. It is considered that this is due to optical environment difference.

Background : Matricaria recutita and Dendranthema indicum are known to have effects such as antioxidant and antihypertensive effects, and they are used as processed food materials. Therefore, it is necessary to examine the possibilities as a natural material for cosmetics. This study was carried out to analyze the volatile flavor components of flowers during cultivation in order to examine the possibility of cosmetics using M. recutita and D. indicum. Methods and Results : This experiment was carried out from April to October, 2017 at Unbong-eup (500 m above sea level) in Namwon, Jeollabuk-do. M. recutita and D. indicum were planted in late May. Then, flowers were collected in October and volatile flavor components were analyzed by Solid Phase Micro Extraction (SPME) method. Samples of flowers for component analysis were weighed in 0.4 g each and placed in a 20 ㎖ vial. GC/MS was used with Agilent Technologies 7890A/5975C (Agilent, USA). Column and carrier gas were DB-5MS (30 m × 0.25 ㎜ × 0.25 ㎛) and helium gas, respectively. As a result of the analysis of M. recutita flowers, we identified a total of 24 components. The major flavor components were mono terpenes and ketones. The main compounds were β-ocimene (24.08%), artemisia ketone (22.82%), γ-terpinene (16.65%), cis-3-hexenyl isovalerate (3.92%), artemisiatriene (3.72%) and O-cymene (3.44%). As a result of analyzing the composition of D. indicum flower, we identified 33 kinds of ingredients. The major flavor components were monoterpenes and sesquiterpenes. The main compounds were sabinene (19.67%), trans-oiperitol (13.22%), α-phellandrene (10.05%), myrcene (7.53%), cineole (4.36%), α-terpinene (3.60%) and trans-ocimene (3.57%). Conclusion : We identified 24 flavor components and 33 flavor components in flower of M. recutita and D. indicum, respectively. Eight of the identified or estimated compounds were common to both samples. The reason why the flavor components kinds of M. recutita flowers were few was thought to be due to the influence of collection time. The main flowering period of M. recutita and D. indicum were May and October, respectively, but the use of the samples collected in October seemed to have influenced.

Background : Although Aster scaber is a perennial plant, it needs to be renewed every three years in the cultivation of the facility, so it is necessary to increase the efficiency of production by extending the cultivation period. This study was carried out to investigate the differences in the growth characteristics of facility grown A. scaber according to the treatment of soil conditioner for the extension of the plant cultivation. Methods and Results : Soil physics improvement material for the extension of cultivated aster scaber was selected from rice straw, rice husk charcoal and coir fiber. In this study, 1,000 ㎏ of coir fiber, 1,000 ㎏ of rice straw, and 1,000 ㎏ of rice husk charcoal were treated per 10a of the soil improvement material, and the untreated control was set as a control. After the test treatment, the growth conditions such as survival rate, plant length, leaf length, leaf width, and stalk diameter were investigated. The control group was investigated as the survival rate was 96.1%, plant length average was 16.3 ± 1.8 ㎝, leaf length average was 7.7 ± 1.2 ㎝, leaf width average was 7.4 ± 0.7 ㎝, and stalk diameter average was 1.97 ± 0.3 ㎜. rice straw treatment is as the survival rate was 95.8%, plant length average was 13.8 ± 1.9 ㎝, leaf length average was 6.5 ± 0.8 ㎝, the leaf width average was 5.9 ± 0.7 ㎝ and the stalk diameter average was 1.85 ± 0.4 ㎜. Rice husk charcoal treatment is as the survival rate was 99.7%, plant length average was 17.4 ± 1.7 ㎝, leaf length average was 8.4 ± 1.1 ㎝, the leaf width average was 7.5 ± 0.8 ㎝ and the stalk diameter average was 2.15 ± 0.5 ㎜. Coir fiber treatment is as the survival rate was 96.9%, plant length average was 16.9 ± 1.7 ㎝, leaf length average was 7.9 ± 1.4 ㎝, the leaf width average was 6.9 ± 1.0 ㎝ and the stalk diameter average was 2.01 ± 0.5 ㎜. The results of the study showed that the growth of rice husk charcoal was good and the survival rate was high and the growth of straw treatment was relatively low and the rate of survival was low. However, no significant difference was found in the treatment of the remedies. Conclusion : As a result of investigating the differences in the growth characteristics of the A. scaber according to the treatments of the soil improvement agent, the growth and survival rate of the rice husk charcoal treatments were relatively high, but no significant difference was found. Therefore, the use of rice straw, rice husk charcoal, and coir fiber as a soil improvement agent does not appear to have much effect on the initial growth of the A. scaber.

High yield is the most important trait in various agricultural characteristics. Many approaches to improve yield have been tried in conventional agricultural practice and recently biotechnological tools employed for same goal. Genetic transformation of key genes to increase yield is one way to overcome current limitation in the field. We are producing transgenic soybean plants through high efficient transformation method by introducing all gene member with AT-hook binding domain, hoping to obtain manageable delay of senescence. Many transgenic soybean plants are growing in greenhouse and GMO field, and will be evaluated their senescence and any association with yield increase.

Soybean is a crop of importance economically and nutritionally in many parts of the world. Thanks to many new genes brought from genomic research, It is possible to introduce various candidate genes through genetic transformation to see the performance of the genes in field. In our lab, soybean transformations have been tried for last 10 years to probe the possibility of traits improvement by transformation of new gene into soybean. For this purpose, three different genes were transformed into Korean soybean variety, Kwangan. First, the gene that controls early flowering of plant was transformed into Kwangan. Second, a candidate gene for soybean mosaic virus (SMV) resistance was transformed to produce transgenic plants. Third, another candidate gene for drought tolerance was transformed. All the transgenic plants from three genes transformation were produced for their gene insertion and their expression using PCR, qRT-PCR. Further analysis including harvesting seeds is currently undertaken.

“Hwanggeumchal”, a new covered waxy cultivar derived from the cross between “Chalssalbori” and “Milyang 65” with waxy endosperm and early maturing cultivars, respectively was developed at Honam Agricultural Research Institute (HARI), NICS, RDA, 2006. The origin of “Hwanggeumchal” is “Suwon 403” (SB942090-B-B-B-42-1). The initial cross was made in 1994 and the selected line showed a high yield and good quality characteristics under yield trial test in 2003. “Suwon 403” consistently performed well for three years (2004-2006) from the four locations of regional yield trial (RYT) in Korea and released as “Hwanggeumchal”. The characteristics of “Hwanggeumchal” were the following: rate I growth habit, green leaf and stem, compact spike and with long rough awns. The heading date was April 30 in upland and April 28 in paddy field, which was 1 and 4 days later than that with check cultivar, “Seodunchalbori”. The culm length was 81 cm which was 3 cm shorter than those with check cultivar. It showed spike length of 4.5 cm and 633 spikes per m2, 64 grains per spike, 27.6 g of 1,000-grain weight and 632 g of test weight. It showed stronger winter hardiness and higher resistance to barley yellow mosaic virus (BaYMV) than those with check cultivar. It had yellow aleurone and showed higher water absorption, expansion rate and total phenol content than those of check cultivar, but lower protein, β-glucan content and pearling rate. The average yield of the pearled grain in the RYT was 4.04 ton ha-1 in upland and 4.12 ton ha-1 in paddy field, which was 10% higher and 4% lower than that of the check cultivar, respectively. This cultivar would be suitable for the area above the daily minimum mean temperature of -8℃ in January in Korean peninsula.