표면발현(surface-display system)은 세포 또는 바이러스 표면에 목적 단백질을 고정하여 발현시킴으로써 목적 단백질에 대하여 독립적인 공간 구조 및 생물학적 활성을 부여하는 단백질 공학 기술이다. 또한 이를 이용하여 높은 중화항체 유도 및 대량생산이 가능한 삼량체의 형태로 항원 단백질의 발현 또한 가능하다. BES(baculovirus expression system)에서의 표면발현 기술은 번역 후 수정과정 및 복잡한 구조의 다양한 단백질의 발현이 가능하기 에 다른 숙주 기반 시스템보다 효율적이라고 보고되고 있다. 그러나 목적 단백질 외의 다른 표면 단백질과 발현 공간에서의 경쟁으로 목적 단백질의 낮은 생산량이 큰 문제점으로 지적되고 있다. 따라서, 이러한 BES에서 표면 발현의 생산 효율을 증대시키기 위하여, 동일한 표면 공간에 대한 단백질 간의 발현 경쟁에 대해 실험적으로 확인 후, 그를 해결하기 위하여 표면발현에 최적인 목적 단백질 발현을 위한 프로모터 선발 실험을 수행하였다. 이를 통해 BES에서 표면발현에 의한 목적 단백질의 생산 효율을 증대시킬 수 있음을 확인하였다.

부추속은 수선화과에 속하며 약 1000여종에 이른다. 좀부 추는 자생 부추속에 속하며 식용이 가능하고 크기가 작아 분 화식물로 적합하다. 이에 따라 본 연구는 좀부추를 분화 소재 로서 개발하기 위하여 식물의 측지성장을 촉진하고 꽃의 품질 을 향상시키기 위해 수행되었다. 이를 위하여 좀부추의 구근 을 생장조절제(GA3, BA, 에테폰, TDZ)에 다른 시간(1, 5시 간)동안 침지처리했을 때 식물의 생장과 꽃에 어떤 영향을 주 는지 조사하였다. GA3 처리구는 엽수와 자구의 수가 증가해 증식을 촉진시키는 효과가 있었다. 게다가 GA3는 화수의 증 가와 조기개화를 유도했다. 그러나 엽폭과 화경의 폭은 감소 하였다. 에테폰은 좀부추의 초장과 초폭에서 영향을 주지 않 았으나 1h에서 자구의 수가 증가하였다. 에테폰은 화서 발생 을 억제하여 화경의 수가 감소하였다. BA는 식물의 생장과 개 화 특성에 유의적인 영향을 보이지 않았다. TDZ처리한 식물 은 왜화되고 생육상태가 불량하였으며, 식물을 고사시켰다.

Air conditioning facilities in nuclear power plants use pre-filters, HEPA filters, activated carbon filters, and bag filters to remove radionuclides and other harmful substances in the atmosphere. Spent filters generate more than 100 drums per year per a nuclear power plant and are stored in temporary radioactive waste storage. Plasma torch melting technology is a method that can dramatically reduce volume by burning and melting combustible, non-flammable, and mixed wastes using plasma jet heat sources of 1,600°C or higher and arc Joule heat using electric energy, which is clean energy. KHNP CRI & KPS are developing and improving waste treatment technology using MW-class plasma torch melting facilities to stably treat and reduce the volume of radioactive waste. This study aims to develop an operation process to reduce the volume of bag filter waste generated from the air conditioning system of nuclear power plants using plasma torch melting technology, and to stably treat and dispose of it. It is expected to secure stability and reduce treatment costs of regularly generated filter waste treatment, and contribute to the export of radioactive waste treatment technology by upgrading plasma torch melting technology in the future.

When decommissioning a nuclear power plant, the structure must be made to a disposable size. In general, the cutting process is essential when dismantling a nuclear power plant. Mainly, thermal cutting method is used to cutting metal structures. The aerosols generated during thermal cutting have a size distribution of less than 1 μm. The contaminated structures are able to generate radioactive aerosols in the decommissioning. Radioactive aerosols of 1 μm or less are deposited in the respiratory tract by workers’ breathing, causing the possibility of internal exposure. Therefore, workers must be protected from the risk of exposure to radioactive aerosols. Prior knowledge of aerosols generated during metal cutting is important to ensure worker safety. In this study, the physical and chemical properties of the aerosol were evaluated by measuring the number and mass concentrations of aerosols generated when cutting SUS304 and SA508 using the laser cutting method. High-resolution aerosol measuring equipment (HR-ELPI+, DEKATI) was used to measure the concentration of aerosols. The HR-ELPI+ is an impactor-type aerosol measuring equipment that measures the aerosol number concentration distribution in the aerodynamic diameter range of 6 nm to 10 um in real-time. And analyze the mass concentration of the aerosol according to the diameter range through the impactor. ICP-MS was used for elemental mass concentration analysis in the aerosol. Analytical elements were Fe, Cr, Ni and Mn. For the evaluation of physical and chemical properties, the MMAD of each element and CMAD were calculated in the aerosol distribution. Under the same cutting conditions, it was confirmed that the number concentration of aerosols generated from both materials had a uni-modal distribution with a peak around 0.1 um. CMAD was calculated to be 0.072 um for both SUS304 and SA508. The trend of the CMAD calculation results is the same even when the cutting conditions are changed. In the case of MMAD, it was confirmed that SUS304 had an MMAD of around 0.1 μm in size for only Fe, Cr and Mn. And SA508, Fe, Cr, Ni and Mn were all confirmed to have MMAD around 0.1 μm in size. The results of this study show that a lot of aerosols in the range of less than 1 μm, especially around 0.1 μm in size, are generated when metal is cut using laser cutting. Therefore, in order to protect the internal exposure of workers to laser metal cutting when decommissioning NPPs, it is necessary to protect from nano-sized aerosols beyond micron size.

The fuel fabrication facility has been built and is being operated by KAERI since licensing research reactor fuel fabrication in 2004. After almost 20 years of operation, outdated equipment for fabrication or inspection has been replaced by automated, digitalized ones to assure a higher quality of nuclear fuels. However, the generation of a large amount of radioactive waste is another concern for the replacement in terms of its volume and various types of it that should be categorized before disposal. The regulatory body, NSSC (Nuclear Safety and Security Commission) released a notice related to the classification of radioactive wastes, and most accessory equipment can be classified into the clearance levels, called self-disposal waste. In this study, the practice of self-disposal of metal radioactive waste is carried out to reduce its volume and downgrade its radioactivity. For metal radioactive waste, which is expected to occupy the most amount, analysis status and legal limitations were performed as follows: First, the disposal plan was established after an investigation of the use history for equipment. Second, those were classified by types of materials, and their surface radio-contamination was measured for checking self-disposable or not. After collecting data, the plan for the self-disposal was written and submitted to the Korea Institute of Nuclear Safety (KINS) for approval.

In the design of a spent-fuel (SF) storage, the consideration of burnup credit brings the benefits in safety and economic views. According to it, various SF burnup measurement systems have been developed to estimate high fidelity burnup credit, such as FORK and SMOPY. Recently, there are a few attempts to localize the SF burnup measurement system in South Korea. For the localization of SF burnup measurement systems, it is very important to build the isotope inventory data base (DB) of various kinds of SFs. In this study, we performed DeCART2D/MASTER core follow calculations and McCARD single fuel assembly (FA) burnup analyses for Hanbit unit 3 and confirmed the characteristic of the isotope inventory over burnup. Firstly, the core follow calculations for Cycles 1~7 were performed using DeCART2D/MASTER code system. The core follow calculation is very realistic and practical because it considers the design conditions from its nuclear design report (NDR). Secondly, the Monte Carlo burnup analyses for single FAs were conducted by the McCARD Monte Carlo (MC) transport code. The McCARD code can utilize continuous energy cross section library and treat complex geometric information for particle transport simulation. Accordingly, the McCARD code can provide accurate solutions for burnup analyses without approximations, but it needs huge computing resources and time burden to perform whole-core follow calculations. Therefore, we will confirm the effectiveness of the single McCARD FA burnup analyses by comparing the DeCART2D/MASTER core follow results with the McCARD solution. From the results, the use of single FA burnup analyses for the establishment of the DBs will be justified. Various FAs, that have different 235U enrichments and loading pattern of fuel rods and burnable absorbers, were considered for the burnup analyses. In addition, the results of the sensitivity analyses for power density, initial enrichment, and cooling time will be presented.

Minuartia laricina (L.) Mattf. is a Korean native plant with high potential as a commercial flowering potted plant due to its compactness and long flowering duration. However, because this plant is a groundcover, it is susceptible to lodging and leggy growth. Therefore, this study investigated the effects of plant growth retardants (PGRs) on the inhibition of stem elongation and flowering characteristics of M. laricina. Commercial products, Trimmit, Cycocel, and B-Nine, were used for the exogenous PGR application of paclobutrazol (PBZ), chlormequat chloride (CCC), and daminozide (DMZ), respectively. Application concentrations were 50 and 100 mg·L-1 for PBZ; 100, 500, and 1,000 mg･L-1 for CCC; and 500, 1,000, and 2,000 mg·L-1 for DMZ. Paclobutrazol was the only PGR that inhibited stem elongation. The stem lengths of the plants treated with 50 or 100 mg·L-1 PBZ were 2.2 cm (13%) or 9.8 cm (57%) shorter, respectively, than those of the control. 50 mg·L-1 PBZ retarded stem growth effectively without negatively affecting flowering or other growth parameters, whereas 100 mg·L-1 PBZ caused excessive dwarfing and significantly reduced flowering by 59%. CCC and DMZ applications were ineffective for growth control. Flowering time was accelerated with most PGRs, except for 2,000 mg·L-1 DMZ, reducing the time to flowering by 2–8 days. These results indicate that the stem growth of M. laricina was successfully inhibited with PBZ but not with CCC or DMZ. Thus, we concluded that a single application of 50 mg·L-1 PBZ or similar treatment is effective in miniaturizing M. laricina without causing harm to its growth or aesthetic value, such as the flower number. Additionally, because CCC and DMZ are not persistent in the growing medium, testing multiple application times for these PGRs is crucial.

목적: 상분리가 일어나지 않는 실리콘하이드로겔 콘택트렌즈(silicone hydrogel contact lens, SH-CL) 제조에 적합한 실리콘 모노머의 구조를 알아보고자 한다. 방법 : HEMA(2-hydroxyethyl methacrylate)와 세 종류의 실리콘 모노머, TRIM[3-(trimethoxysilyl)propyl methacrylate, Aldrich], TEMA[2-(trimethylsilyloxy)ethyl methacrylate, TCI], TMMA[(trimethylsilyl) methacrylate, Aldrich]를 활용하여 완전몰드로 SH-CL를 제조하였다. 함수율과 UV-VIS spectrophotomter 를 이용한 광투과율, TGA 분석을 통한 열적안정성 등의 물리적 특성과 FT-IR 분석을 통한 화학적 특성을 알아 보았다. 결과 : 동일한 양의 TRIM, TEMA, TMMA를 사용하여 제작한 SH-CL의 광투과율은 각각 92%, 86%, 80%로 측정되었으며, 함수율은 TRIM을 사용한 SH-CL에서 39.3%로 가장 높게 나타났다. FT-IR 분석 결과 세 종류의 SH-CL 모두 silicone monomer와 HEMA의 중합반응이 잘 이루어졌음을 확인할 수 있었고, TGA 분석을 통해 TRIM monomer의 sol-gel 반응 유무를 확인할 수 있었다. 결론 : Sol-gel 반응에 적합한 구조를 가지고 있어 상분리가 일어나지 않아 투명하고, Si에 극성 작용기인 methoxy기가 연결되어 있는 TRIM monomer가 SH-CL 제조에 적합한 구조임을 확인할 수 있었다.

At high temperatures, molten salt has heat transfer properties like water. Molten salt has the characteristics of a strong natural circulation tendency, large heat capacity, and low thermal conductivity. Unlike sodium, molten salt does not react explosively exothermically with air. However, molten salt has a strong tendency to corrode materials, and its properties are easily changed by a sensitive reaction to oxygen and moisture. Therefore, it is necessary to study material corrosion properties and chemical control methods for nuclear fuel salts, which are eutectic mixtures. In this study, the optimal operation method of the thermal convection loop is established to perform the experiments on the molten salt. The process describes briefly as follows. The operation step consists of preparation, purification, transportation, and operation. In the preparation, the step checks the entire structure and equipment (TC, blower, vacuum pump, etc.). And melt the salt mixture at a high temperature (670°C) slowly in the purification step. Before injecting the molten salt, the surface temperature of the entire loop must retain temperature (about 500°C) constantly. Completely melted molten salt in the melting pot is flow along the pipe of the thermal convection loop in the transportation step. Lastly, the convection of molten salt goes to keep by the temperature difference. The thermal convection loop can be utilized for various experiments such as corrosion tests, component analyses, chemistry control, etc.

Molten salt used in the multipurpose molten salt experiment must be of high purity. Depending on the purpose of the experiment, only the base component of the molten salt be used, or a component simulating a nuclear fission product be added to the base component and used. In all cases, an increase in the concentration of impurities such as oxygen and moisture may lead to an erroneous interpretation when analyzing the experimental results. Therefore, molten salt should be purified before use. In this study, the purification of molten salt is described for multi-purpose molten salt experiments. The salt mixture is selected as MgCl2-NaCl and is quantified at a mixing ratio of 43mol%:57mol%. The salt mixture is treated in a glove box environment because of must minimize the reaction of adsorbing oxygen and moisture when the salt mixture is exposed to the atmosphere. MgCl2 is more likely to contain water than NaCl, the purification of the NaCl-MgCl2 mixture is established according to the purification process for removing water from MgCl2. A process for purifying the salt mixture briefly consists as follows: drying moisture, melting salts, purification, removing HCl, and stabilization. Through the process be able to obtain high-purity molten salt and more accurate experiment results.

In Korea livestock farms breeding cattle have been suffering from re-emerging problems of Brucella (B.) abortus infection while steady decline of bovine brucellosis. Therefore, this study underscored the identification and association of etiological agent of brucellosis in cattle in South Korea. The incidence of brucellosis in cattle was analyzed by bacteriological and molecular methods in 187 brucellosis-suspicious farms of 11 regions between 2018 and 2020. Brucella isolates from various specimens were identified by Brucella-specific multiplex PCR. Epidemiological data were collected by local official veterinarians through history taking from farmers and animal data systems. In 230 of 560 cattle (40.9%) and 94 of 187 farms (50.3%), a total of 313 B. abortus were isolated from various specimens, the majority of isolates were from supramammary lymph node (41%). In epidemiological findings, the majority of positive cases were mainly caused by resurgence (43.7%) and unknown (37.2%). Of 94 positive cases isolated B. abortus, abortion in cattle infected by B. abortus occurred in 51 farms (54.3%) where led to resurgence in 30 farms and environmental survival of B. abortus in 9 farms. Consequently, these findings revealed the existence of etiological agent of bovine brucellosis in Korea, which still occurred at low levels in distinct regions where are allowed to call for persistent biosecurity. Thus, we highlight that brucellosis in Korea needs to take more effective control strategies with potential evidence. Moreover it is ultimately important to maintain a constant monitoring for eradication of brucellosis.

부추속 식물은 수선화과의 다년생 초본으로 약 1000여종에 이른다. 한국에서는 24종의 자생종이 분포하며 유전자원으로서 큰 가치를 지닌 분류군이다. 그러나 자생부추속 식물에 대한 연구는 일부 종에 대하여 한정적으로 이루어지고 있으며, 갯부추, 두메부추, 울릉산마늘과 같이 최근 분류되거나 잘 알려지지 않은 종에 대한 연구는 매우 부족하였다. 따라서 본 연구는 자생부추속 4종(강부추, 한라부추, 갯부추, 산부추)에 대한 온도 및 명암처리에 대한 발아특성을 조사하였다. 발아 특성은 발아율, T50, 평균발아일수, 발아균일도, 발아속도로 평 가하였다. 강부추와 갯부추는 5℃에서 50%이상의 발아율을 보였으나 한라부추와 산부추는 전혀 발아하지 않았다. 갯부추 는 남부지방 해변가, 강부추는 강이나 하천주변에 서식하며 한라부추와 산부추는 주로 산지에 서식하는 것으로 알려져있다. 따라서 이러한 차이는 종별 생육지의 환경조건에 따른 차 이로 추정된다. 5℃에서 강부추의 발아율은 명조건(70.0%)보다 암조건(93.3%)에서 향상되었으며, T50과 평균발아일수도 단축되었다. 한라부추는 15℃에서 암조건이 명조건보다 발아율이 증가하고 15℃와 20℃에서는 T50과 평균발아일수가 단축 되었다. 그에 따라 발아속도도 증가하였으며 발아균일도도 상 승하였다. 갯부추는 5℃에서 발아율은 명조건(70.0%)보다 암 조건(83.3%)에서 상승했고, 15℃에서 T50과 평균발아일수가 단축되었으며 발아속도가 증가하였다. 산부추는 15℃와 20℃ 에서 T50과 평균발아일수가 단축되었으며 발아속도가 증가하 였다. 따라서 상대적으로 낮은 온도 처리구에서 명조건보다 암조건이 일부 발아특성을 향상시켰다. 실험에 사용된 4종의 종자는 대부분 15~25℃에서 90%가 넘는 발아율을 보였으나, 다른 발아특성은 온도와 광에 따른 차이를 보였다. 강부추와 산부추의 T50, 평균발아일수, 발아속도는 20℃와 25℃에서 가 장 향상되었고, 한라부추와 갯부추는 25℃에서 T50과 평균발 아일수가 가장 단축되었으며, 발아속도도 가장 빨랐다. 결론적으로 발아특성을 종합적으로 고려했을 때, 강부추는 광과 관계없이 20~25℃, 한라부추는 광과 관계없이 25℃, 갯부추는 암조건 25℃, 산부추는 명조건 25℃와 암조건 20~25℃를 발아 에 적합한 조건으로 제시하였다.