The quality properties of bread with Lentinula edodes powder were investigated to find the most adequate ratio of the Lentinula edodes powder. The protein and crude fat were increased in proportion to the added quantity of Lentinula edodes powder. The amount of ash was found the most in the bread with 1% Lentinula edodes powder. It was confirmed that the volume of bread with Lentinula edodes powder decreased as the amount of the Lentinula edodes powder increased. The brightness was the highest in the control and was inversely proportional to the added amount of Lentinula edodes powder. The yellowness and redness of the dough were proportional to the added amount of Lentinula edodes powder. Total amino acids and free amino acids were found. The dough with 3% Lentinula edodes powder contained the highest amounts of both, followed by 2%, and 1%. When evaluating the length of storage, the bread’s springiness and cohesiveness decreased. Regarding the taste, preference was given to the bread with 2% Lentinula edodes powder, which had the lowest value of bad odors and odd texture in the sensory test.

This study examined the characteristics of Sulgidduk with different amounts of apios powder (0, 10, 20, 30, and 40%). The moisture content of Sulgidduk significantly increased with the addition of apios powder. Also, the pH values of Sulgidduk significantly decreased with the addition of apios powder. The addition of apios powder in the Sulgidduk decreased the lightness (L) in Hunter’s color value, but increased the redness (a) and yellowness (b). By increasing the quantity of apios powder, the hardness, gumminess, and chewiness of Sulgidduk decreased and its springiness increased. The addition of apios powder in the Sulgidduk increased the total polyphenol content and DPPH-radical-scavenging activity. In the sensory evaluation, the addition of 20, 30% apios powder had the best score in taste and overall preference. This study suggests that apios powder is an excellent ingredient for improving the sensory preference and functionality of Sulgidduk. The study also shows that it was the addition of 30% apios powder can be used to make functional Sulgidduk.

This study aimed to evaluate the utilization of the top of a low intake of root, through the analysis of the antioxidant activity of the powder of hydroponic-cultured ginseng. Quality characteristics and antioxidant activity were compared and analyzed with Korea’s traditional dessert Gaeseong-Juak, which is made of the powder of hydroponic-cultured ginseng's leaf by adjusting the added volume. DPPH radical scavenging activity of the hydroponic-cultured ginseng by the part powder was in the following order: highly stem, leaf and root. It was measured as 67.9%, 42.9%, and 25.9% at the 1 mg/m level. Gaeseong-Juak was prepared by adding hydroponic-cultured ginseng leaf powder at 0%, 0.3%, 0.6%, and 0.9% of the rice powder. As the content of hydroponic-cultured ginseng leaf powder increased, moisture content, L-value, and a-value were significantly decreased, while the b-value was significantly increased. The texture profile analysis of Gaeseong-Juak was not significantly different among the samples. In the sensory test, the sample containing 0.6% hydroponic-cultured ginseng leaf powder achieved good scores. The DPPH radical scavenging activity of Gaeseong-Juak was significantly increased, as the addition level increased, compared to the original. Based on the above results, hydroponic-cultured ginseng leaf was verified to be a possible natural antioxidant. It can increase food's nutritional values and possibilities when made of hydroponic-cultured ginseng, using leaf which is added to the traditional dessert Gaeseong-Juak.

This study aimed to investigate quality characteristics of white bread with Tenebrio molitor L. powder (TMP). Because of the proximate composition analysis of the white bread with TMP, the content of protein and crude fat increased slightly in proportion to brown dough, and ash was highest in white breads with 7% added TMP. The bread volume decreased as TMP content increased. The control bread lightness was highest at 78.3, and was negatively correlated with the TMP content. The degree of redness increased with the TMP concentration. The total free amino acid contents were in the following order: white bread with 7% TMP > white bread with 5% TMP > white bread with 3% TMP. With respect to the texture, white bread springiness and cohesiveness with TMP decreased by storage period. The chewiness and brittleness of white breads with TMP decreased significantly with higher concentrations. With extended storage, the bread with TMP added showed lower springiness and cohesiveness; while bread with a lower TMP percentage maintained better chewiness and brittleness. The sensory taste preference was highest for white bread with 3% TMP. Residual appetite scores showed a lower taste preference as TMP content increased and was lowest for white bread with 3% TMP.

This study, analyzed the general and minerals composition of kamut and investigated its effect on blood components in mice fed a high fat diet. The content of each general component of kamut was as follows: 11.02±0.75% water, 13.16 ±1.28% crude protein, 1.85±0.19% crude fat, and 1.97±0.13% ash. The leptin level was the highest in the HF group(30.00± 0.00 ng/mL) when compared to the control group. There was a significant decrease of 23.65±5.54 ng/mL in the HFK group when compared to the HF group (p<0.05). The blood LDL-cholesterol concentration was the lowest in the control group at 10.00±2.00 mg/dL. The level was highest in the HF group at 28.00±0.00 mg/dL when compared with the other groups (p<0.05). The aspartate transaminase (AST) level was significantly higher in the HFK group (179.33±173.88 U/L) than in the control (61.00±12.73 U/L) and HF groups (132.00±0.00 U/L). According to the results of this study, the consumption of kamut lowers the blood LDL-cholesterol level more than the consumption of wheat flour. Additionally, kamut contains antioxidant substances such as selenium and zinc, which are thought to contribute to vascular health and thus aid in maintaining good health. Therefore, it is necessary to develop a variety of health foods using kamut; it should be used as a functional food for the maintenance of good health.

This study investigated the substitution of beet powder for rice flour in julpyun recipes with amounts of 0, 1, 3, and 5%. The beet powder had a moisture content, crude protein content, crude fat content, crude ash content, crude dietary fiber content, DPPH radical scavenging activity and total phenol content of 18.90, 1.37, 0.17, 0.91, 3.65, 12.03%, and 87.63 mg, respectively. The moisture content decreased with increasing beet powder content. The pH, DPPH and total phenol content increased with increasing beet powder content. The chromaticity measurement result showed that the ‘L’ and ‘b’ of julpyun decreased with increasing beet powder content, but ‘a’ increased. The texture measurement result showed that the hardness, cohesiveness and chewiness of julpyun increased with increasing beet powder content, but the springiness decreased. The adhesiveness was similar regardless of the beet powder content. The overall preference scores showed a high overall acceptability for julpyun made with 3% beet powder.

This study examined the quality characteristics of cookies prepared with mulberry leaf powder (0, 1, 3, 5, and 7%) substituted for flour. The pH of the cookie dough decreased significantly in response to the addition of all levels of mulberry leaf powder. The spread factor of the cookies also increased significantly with increasing mulberry leaf powder content added to the cookies recipe. In addition, the Hunter’s color L and a values decreased significantly with increasing mulberry leaf powder content, whereas the b value increased. According to hardness measurements, the substitution of 1~7% mulberry leaf powder resulted in increased hardness compared to the control. Moreover, the DPPH free radical scavenging activity of the cookies was increased significantly (p<0.05) with increasing levels of mulberry leaf powder. The sensory evaluation revealed cookies containing 3% to have the highest scores.

본 연구는 고기능 미래 식량자원으로서 이용 가치가 높은 밀웜과 검은콩을 첨가한 쿠키를 제조하고, 밀웜 및 검은콩 첨가량에 따른 품질특성, 항산화 활성, 기호성을 비교해 보고자 수행되었다. 밀웜의 첨가량을 0%, 10%, 20%, 30%로 증가한 쿠키와 밀웜과 함께 검은콩 분말 10%, 20% 를 첨가한 쿠키를 제조하여, 품질특성, 항산화 활성, 관능 특성을 비교한 결과는 다음과 같다. 팽창율, 손실율은 밀웜만 첨가한 쿠키와 밀웜과 검은콩 분말을 함께 첨가한 쿠키 모두에서 밀웜 분말 첨가량이 증가함에 따라 유의적으로 증가하였다. 총 폴리페놀 함량, DPPH 라디칼 소거능, FRAP, ABTS 측정 결과 밀웜 분말과 검은콩 분말을 첨가한 쿠키 모두에서 아무것도 첨가하지 않은 쿠키보다 활성이 높게 측정되었다. 밀웜 분말의 첨가량이 증가할수록 항산화 활성은 증가하여 밀웜 분말 30% 첨가군에서 가장 높은 항산화 활성을 나타내었다. 또한 동일한 양의 밀웜에 검은콩 분말을 함께 첨가한 쿠키는 밀웜 분말만 첨가한 쿠키 보다 총페놀함량, DPPH 라디칼 소거능, ABTS 라디칼 소거능이 높게 측정되었다. 밀웜만 첨가한 쿠키의 색도는 첨가량이 증가할수록 쿠키의 밝기(L 값)와 황색도(b 값)는 유의적으로 감소하고, 적색도는(a 값) 증가 하였고, 밀웜과 검은콩을 함께 첨가한 쿠키는 적색도(a 값), 밝기 (L 값), 황색도 (b 값)가 모두 감소하는 것으로 측정 되었다. 쿠키의 조직감 측정결과 밀웜 첨가량이 증가할수록 쿠키의 강도가 유의적으로 감소하였으나(p < 0.05), 검은콩을 함께 첨가한 쿠키는 강도가 강하게 나타나 밀웜 증가에 의한 쿠키 강도의 감소를 검은콩을 첨가함으로써 개선할 수 있었다. 이상의 결과에서 밀웜 쿠키의 품질특성, 항산화 활성, 기호성을 모두 향상하기 위해서는 밀웜 분말을 10% 첨가하여 제조하는 것이 가장 우수하다는 것 을 알 수 있었다.

SiAlON-based ceramics are some of the most typical ceramic materials used as cutting tools for HRSA(Heat Resistant Super-Alloys). SiAlON can be fabricated using ceramic processing, such as mixing, granulation, compaction, and sintering. Spray drying is a widely-used method for producing a granular powder of controlled morphology and size with flowability. In this study, we report a systematic investigation aimed at optimizing spherical granule morphology by controlling spray-drying parameters such as gas flow and feed rate. Before spray drying, the viscosities of the raw material slurries were also optimized with the amount of dispersant added.

Porous W-10 wt% Ti alloys are prepared by freeze-drying a WO3-TiH2/camphene slurry, using a sintering process. X-ray diffraction analysis of the heat-treated powder in an argon atmosphere shows the WO3 peak of the starting powder and reaction-phase peaks such as WO2.9, WO2, and TiO2 peaks. In contrast, a powder mixture heated in a hydrogen atmosphere is composed of the W and TiW phases. The formation of reaction phases that are dependent on the atmosphere is explained by a thermodynamic consideration of the reduction behavior of WO3 and the dehydrogenation reaction of TiH2. To fabricate a porous W-Ti alloy, the camphene slurry is frozen at -30℃, and pores are generated in the frozen specimens by the sublimation of camphene while drying in air. The green body is hydrogen-reduced and sintered at 1000℃ for 1 h. The sintered sample prepared by freeze-drying the camphene slurry shows large and aligned parallel pores in the camphene growth direction, and small pores in the internal walls of the large pores. The strut between large pores consists of very fine particles with partial necking between them.

Aluminum nitride (AlN) powder specimens are treated by high-energy bead milling and then sintered at various temperatures. Depending on the solvent and milling time, the oxygen content in the AlN powder varies significantly. When isopropyl alcohol is used, the oxygen content increases with the milling time. In contrast, hexane is very effective at suppressing the oxygen content increase in the AlN powder, although severe particle sedimentation after the milling process is observed in the AlN slurry. With an increase in the milling time, the primary particle size remains nearly constant, but the particle agglomeration is reduced. After spark plasma sintering at 1400℃, the second crystalline phase changes to compounds containing more Al2O3 when the AlN raw material with an increased milling time is used. When the sintering temperature is decreased from 1750℃ to 1400℃, the DC resistivity increases by approximately two orders of magnitude, which implies that controlling the sintering temperature is a very effective way to improve the DC resistivity of AlN ceramics.

In a previous study, it was reported that enzymatic hydrolysis under pressurization could be a new method which could produce arginine dipeptide and free amino acid in anchovy hydrolysate as salty enhancer at optimal condition. Powder is more efficient than liquid in terms of transport and storage stability. For the purpose of producing spray dried powder of various salt contents was investigated the effect of different salt concentration of anchovy hydrolysate on spray dried powder properties. The anchovy hydrolysate of various salt contents(in the range of approximately 0.7- 19.8% w/w) prepared adding the fish sauce (Dae-Young fish market) at inlet drying air temperatures of 120°C and 140°C. The process yield and physicochemical properties such as moisture content, bulk density, hygroscopicity and the morphology (EDS, XPS, XRD) of the anchovy hydrolysate powder was measured. The glass transition temperatures (Tg) of the powders equilibrated under various water activities were determined using a differential scanning calorimeter (DSC). Different drying conditions and salt concentration could generate anchovy hydrolysate powders with different process yield, bulk density and moisture content. The spray-dried anchovy hydrolysate powder was confirmed by XRD to be a mixture of an amorphous substances and crystalline salts. The energy dispersive X-ray spectrometer (EDS) and X-Ray Photoelectron Spectroscopy (XPS) analysis demonstrated that the surface NaCl concentration of the powders increased with an increasing drying air temperature. Increasing moisture adsorption of the anchovy hydrolysate powders resulted in a Tg reduction. It is suggested that producing spray dried anchovy hydrolysate for the industrial use is the use of the feed salt concentration of not lower than % w/w and inlet air temperature at 120°C, 140°C

Spray freeze-drying (SFD) is a comparatively new method of producing biopharmaceutical powder preparations. In this study, Lactobacillus casei (IFO 15883)was spray freeze-dried to obtain a fine probiotic powder. The survival rate of L. casei in the powder after the SFD process was measured using plate agar counting. To improve the survival rate of L. casei during the SFD process, various experimental conditions were carried out. Among five growth media compositions, in Lactobacilli MRS broth with 1% mannose and 0.1% CaCO3, the viability of the freeze-dried powder was not significantly different from that of the initial powder (p>0.05). The most effective air pressure and protective agentduring SFD were 20 kPa and buffered peptone water (BPW), respectively. Scanning electron microscopy (SEM) was applied to estimate the physical structure and properties of the particles. SFD probiotic particles were of various shapes and sizes with porous structures under different SFD conditions. The average diameter of optimized probiotic powder particles with annealing was 24.8 μm. The survival rate of the final SFD probiotic powder under conditions was 97.7%.

In this study, a method to produce a fine volatile powder extracted from shiitake mushrooms using spray freeze-drying (SFD) was investigated. The analysis of the water-soluble aromatic compounds was carried out by headspace solid phase micro-extraction (HS-SPME) coupled withgas chromatography-mass spectrometry (GC-MS). Scanning electron microscopy (SEM) and laser particle size analysis were applied to characterizethe physical structure and size distribution of the SFD-derivedparticles. Eleven key volatile compounds were identified in the extracts of shiitake mushroomspre- and post-SFD. Recoveries of aromatic volatiles ranging from 30.9 - 82.9% were observed in the overall flavor profile results from the powder obtained with SFD. SEM analysis demonstrated that the particles of the aromatic powderwere spherical in nature, having highly porous surfaces andmean diameters of 19.3 μm.

The aim of this study was to evaluate the quality characteristics, antioxidant activities, and sensory properties of macaron with cabbage powder (CP). Physicochemical and sensory properties of macaron with different amounts (0%, 1%, 3%, 5%, and 7%) of CP were examined. The quality of macarons was evaluated based on spread factor, baking loss rate, color, texture, antioxidant activities, and sensory evaluation. As amount of CP addition increased, spread factor, baking loss rate, and L and a values decreased, whereas b value increased (p<0.05). For texture properties, hardness, cohesiveness, and springiness were increased by addition of CP (p<0.05). The gumminess and brittleness did not show significant changes up to 3% CP addition although significant changes in 5-7% CP addition (p<0.05) were evident. The total polyphenolic contents, DPPH radical scavenging activities, and reducing power were significantly increased by addition of CP at high concentrations (p<0.05). In the consumer acceptance of macarons, 3% CP showed the highest in color, flavor, texture, and overall acceptance and 5% CP showed the highest in taste. Meanwhile, macaron containing 7% CP showed the lowest scores in texture and overall acceptance (p<0.05). These data suggested that adding 3% of CP was the optimal concentration for making macaron.

This study investigates the quality characteristics of dough and bread added with 6% chestnut shell powder and extruded chestnut shell powder at various conditions. As extrusion process variables, melt temperature (110°C, 130°C, 150°C) and moisture (25% and 30%) were controlled. Total dietary fiber content was slightly increased in extruded chestnut shell powder group. In the farinogram, absorption was significantly increased in the group of 25% moisture content and 30% moisture content (p<0.05). After 2 hours and 3 hours, the leavening heights of dough for control showed a similar tendency to that of dough with extruded chestnut shell at a melt temperature 150°C and with moisture content of 25% and 30%. Specific volume was the highest at a control of 3.74±0.08 cc/g and extruded chestnut shell powder group was slightly higher than the chestnut shell powder group. Firmness after 1 day on control of 107.42±14.52 g was similar to that of the bread with extruded chestnut shell at a temperature of 150°C and moisture content of 25% for 113.33±6.17 g. In conclusion, the extrusion-cooking of chestnut shell powder improved the quality characteristics of dough and bread. The optimum combinations of conditions in tested range were melt temperature at 150°C and moisture content at 25%, and melt temperature at 130°C and moisture content at 30%.

A cultivar (Malus domestica cv. Fuji) of apple was selected to make apple peel (AP) powder by three different powdering methods. Frozen AP was thawed and subsequently was dried or ground without drying. After AP was dried by hot-air drying at 60°C or freeze-drying, the dried AP was ground using a conventional blender. Separately, the thawed AP was powered by using a cryogenic micro grinding technology (CMGT). The ground AP and three types of AP powder were extracted using deionized water, 20, 40, 60, 80, or 100% methanol, followed by vacuum evaporation. The total phenolics contents (TPC), total flavonoids contents (TFC), DPPH, and ABTS radical scavenging capacities of each extract were compared to determine an efficient powdering method. Lyophilized AP powder extract using 60% methanol showed the highest TPC and DPPH radical scavenging capacity. In contrast, 60% methanol extract of the powder by CMGT, resulting in the smallest particle, exhibited the highest TFC and ABTS radical scavenging capacity. This study suggests that the extraction yield of bioactive compounds from AP may be varied according to different powdering methods and that a new powdering process such as CMGT may be applicable to develop functional foods efficiently.